/* $Id: vt320.c,v 1.13 2007/01/07 17:03:32 tom Exp $ */
/*
* Reference: VT330/VT340 Programmer Reference Manual (EK-VT3XX-TP-001)
*/
#include <vttest.h>
#include <ttymodes.h>
#include <esc.h>
static void
show_Locator_Status(char *report)
{
int pos = 0;
int code = scanto(report, &pos, 'n');
char *show;
switch (code) {
case 53:
show = "No locator";
break;
case 50:
show = "Locator ready";
break;
case 58:
show = "Locator busy";
break;
default:
show = SHOW_FAILURE;
}
show_result(show);
}
/*
* Though some people refer to the locator controls as "vt220", it appears in
* later terminals (documented in the vt320 manual, but introduced as in UWS).
*/
int
tst_DSR_locator(MENU_ARGS)
{
return any_DSR(PASS_ARGS, "?53n", show_Locator_Status);
}
static void
show_ExtendedCursorPosition(char *report)
{
int pos = 0;
int Pl = scan_any(report, &pos, 'R');
int Pc = scan_any(report, &pos, 'R');
int Pp = scan_any(report, &pos, 'R');
if (Pl != 0 && Pc != 0) {
if (Pp != 0)
show_result("Line %d, Column %d, Page %d", Pl, Pc, Pp);
else
show_result("Line %d, Column %d (Page?)", Pl, Pc);
} else
show_result(SHOW_FAILURE);
}
/* vt340/vt420 & up */
int
tst_DSR_cursor(MENU_ARGS)
{
return any_DSR(PASS_ARGS, "?6n", show_ExtendedCursorPosition);
}
/******************************************************************************/
static int
tst_device_status(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test Keyboard Status", tst_DSR_keyboard },
{ "Test Printer Status", tst_DSR_printer },
{ "Test UDK Status", tst_DSR_userkeys },
{ "Test Locator Status", tst_DSR_locator },
{ "Test Extended Cursor-Position (DECXCPR)", tst_DSR_cursor },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Device Status Reports (DSR)"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
/*
* DECCIR returns single characters separated by semicolons. It's not clear
* (unless you test on a DEC terminal) from the documentation, which only cites
* their values. This function returns an equivalent-value, recovering from
* the bogus implementations that return a decimal number.
*/
static int
scan_chr(char *str, int *pos, int toc)
{
int value = 0;
while (str[*pos] != '\0' && str[*pos] != toc) {
value = (value * 256) + (unsigned char) str[*pos];
*pos += 1;
}
if (str[*pos] == toc)
*pos += 1;
return value;
}
/*
* From Kermit 3.13 & VT220 pocket guide
*
* Request CSI 1 $ w cursor information report
* Response DCS 1 $ u Pr; Pc; Pp; Srend; Satt; Sflag; Pgl; Pgr; Scss; Sdesig ST
* where Pr is cursor row (counted from origin as 1,1)
* Pc is cursor column
* Pp is 1, video page, a constant for VT320s
* Srend = 40h + 8 (rev video on) + 4 (blinking on)
* + 2 (underline on) + 1 (bold on)
* Satt = 40h + 1 (selective erase on)
* Sflag = 40h + 8 (autowrap pending) + 4 (SS3 pending)
* + 2 (SS2 pending) + 1 (Origin mode on)
* Pgl = char set in GL (0 = G0, 1 = G1, 2 = G2, 3 = G3)
* Pgr = char set in GR (same as for Pgl)
* Scss = 40h + 8 (G3 is 96 char) + 4 (G2 is 96 char)
* + 2 (G1 is 96 char) + 1 (G0 is 96 char)
* Sdesig is string of character idents for sets G0...G3, with
* no separators between set idents.
* If NRCs are active the set idents (all 94 byte types) are:
* British A Italian Y
* Dutch 4 Norwegian/Danish ' (hex 60) or E or 6
* Finnish 5 or C Portuguese %6 or g or L
* French R or f Spanish Z
* French Canadian 9 or Q Swedish 7 or H
* German K Swiss =
* Hebrew %=
* (MS Kermit uses any choice when there are multiple)
*/
#define show_DECCIR_flag(value, mask, string) \
if (value & mask) { value &= ~mask; show_result(string); }
static void
show_DECCIR(char *report)
{
int Pr, Pc, Pp, Srend, Satt, Sflag, Pgl, Pgr, Scss;
int pos = 3; /* skip "1$u" */
int n;
Pr = scanto(report, &pos, ';');
Pc = scanto(report, &pos, ';');
Pp = scanto(report, &pos, ';');
vt_move(5, 10);
show_result("Cursor (%d,%d), page %d", Pr, Pc, Pp);
Srend = scan_chr(report, &pos, ';');
vt_move(6, 10);
if (Srend & 0x40) {
show_DECCIR_flag(Srend, 0x40, "Rendition:");
if (Srend == 0)
show_result(" normal");
show_DECCIR_flag(Srend, 0x08, " reverse");
show_DECCIR_flag(Srend, 0x04, " blinking");
show_DECCIR_flag(Srend, 0x02, " underline");
show_DECCIR_flag(Srend, 0x01, " bold");
}
if (Srend)
show_result(" -> unknown rendition (0x%x)", Srend);
Satt = scan_chr(report, &pos, ';');
vt_move(7, 10);
switch (Satt) {
case 0x40:
show_result("Selective erase: off");
break;
case 0x41:
show_result("Selective erase: ON");
break;
default:
show_result("Selective erase: unknown (0x%x)", Satt);
}
Sflag = scan_chr(report, &pos, ';');
vt_move(8, 10);
if (Sflag & 0x40) {
show_DECCIR_flag(Sflag, 0x40, "Flags:");
show_DECCIR_flag(Sflag, 0x08, " autowrap pending");
show_DECCIR_flag(Sflag, 0x04, " SS3 pending");
show_DECCIR_flag(Sflag, 0x02, " SS2 pending");
show_DECCIR_flag(Sflag, 0x01, " origin-mode on");
} else {
show_result(" -> unknown flag (0x%x)", Sflag);
}
Pgl = scanto(report, &pos, ';');
Pgr = scanto(report, &pos, ';');
vt_move(9, 10);
show_result("Char set in GL: G%d, Char set in GR: G%d", Pgl, Pgr);
Scss = scan_chr(report, &pos, ';');
vt_move(10, 10);
if (Scss & 0x40) {
show_DECCIR_flag(Scss, 0x40, "Char set sizes:");
show_DECCIR_flag(Scss, 0x08, " G3 is 96 char");
show_DECCIR_flag(Scss, 0x04, " G2 is 96 char");
show_DECCIR_flag(Scss, 0x02, " G1 is 96 char");
show_DECCIR_flag(Scss, 0x01, " G0 is 96 char"); /* VT420 manual says this cannot happen */
} else {
show_result(" -> unknown char set size (0x%x)", Scss);
}
n = 11;
vt_move(n, 10);
show_result("Character set idents for G0...G3: ");
println("");
while (report[pos] != '\0') {
char *result = parse_Sdesig(report, &pos);
show_result(" %s\n", result);
println("");
}
}
/******************************************************************************/
/*
* Request CSI 2 $ w tab stop report
* Response DCS 2 $ u Pc/Pc/...Pc ST
* Pc are column numbers (from 1) where tab stops occur. Note the
* separator "/" occurs in a real VT320 but should have been ";".
*/
static void
show_DECTABSR(char *report)
{
int pos = 3; /* skip "2$u" */
int stop;
char *buffer = (char *) malloc(strlen(report));
*buffer = '\0';
strcat(report, "/"); /* simplify scanning */
while ((stop = scanto(report, &pos, '/')) != 0) {
sprintf(buffer + strlen(buffer), " %d", stop);
}
println("");
show_result("Tab stops:%s", buffer);
free(buffer);
}
/******************************************************************************/
int
any_decrqpsr(MENU_ARGS, int Ps)
{
char *report;
vt_move(1, 1);
printf("Testing DECRQPSR: %s\n", the_title);
set_tty_raw(TRUE);
set_tty_echo(FALSE);
do_csi("%d$w", Ps);
report = get_reply();
vt_move(3, 10);
chrprint(report);
if ((report = skip_dcs(report)) != 0) {
if (strip_terminator(report)
&& *report == Ps + '0'
&& !strncmp(report + 1, "$u", 2)) {
show_result("%s (valid request)", SHOW_SUCCESS);
switch (Ps) {
case 1:
show_DECCIR(report);
break;
case 2:
show_DECTABSR(report);
break;
}
} else {
show_result(SHOW_FAILURE);
}
} else {
show_result(SHOW_FAILURE);
}
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
static int
tst_DECCIR(MENU_ARGS)
{
return any_decrqpsr(PASS_ARGS, 1);
}
static int
tst_DECTABSR(MENU_ARGS)
{
return any_decrqpsr(PASS_ARGS, 2);
}
/* Test Window Report - VT340, VT420 */
static int
tst_DECRQDE(MENU_ARGS)
{
char *report;
char chr;
int Ph, Pw, Pml, Pmt, Pmp;
vt_move(1, 1);
println("Testing DECRQDE/DECRPDE Window Report");
set_tty_raw(TRUE);
set_tty_echo(FALSE);
do_csi("\"v");
report = get_reply();
vt_move(3, 10);
chrprint(report);
if ((report = skip_csi(report)) != 0
&& sscanf(report, "%d;%d;%d;%d;%d\"%c",
&Ph, &Pw, &Pml, &Pmt, &Pmp, &chr) == 6
&& chr == 'w') {
vt_move(5, 10);
show_result("lines:%d, cols:%d, left col:%d, top line:%d, page %d",
Ph, Pw, Pml, Pmt, Pmp);
} else {
show_result(SHOW_FAILURE);
}
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
/* Test User-Preferred Supplemental Set - VT320 */
static int
tst_DECRQUPSS(MENU_ARGS)
{
char *report;
char *show;
__(vt_move(1, 1), println("Testing DECRQUPSS/DECAUPSS Window Report"));
set_tty_raw(TRUE);
set_tty_echo(FALSE);
do_csi("&u");
report = get_reply();
vt_move(3, 10);
chrprint(report);
if ((report = skip_dcs(report)) != 0
&& strip_terminator(report)) {
if (!strcmp(report, "0!u%5"))
show = "DEC Supplemental Graphic";
else if (!strcmp(report, "1!uA"))
show = "ISO Latin-1 supplemental";
else
show = "unknown";
} else {
show = SHOW_FAILURE;
}
show_result(show);
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
/* Request Terminal State Report */
static int
tst_DECRQTSR(MENU_ARGS)
{
char *report;
char *show;
vt_move(1, 1);
println("Testing Terminal State Reports (DECRQTSR/DECTSR)");
set_tty_raw(TRUE);
set_tty_echo(FALSE);
do_csi("1$u");
report = get_reply();
vt_move(3, 10);
chrprint(report);
if ((report = skip_dcs(report)) != 0
&& strip_terminator(report)
&& !strncmp(report, "1$s", 3)) {
show = SHOW_SUCCESS;
} else {
show = SHOW_FAILURE;
}
show_result(show);
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
/******************************************************************************/
static int use_DECRPM;
int
set_DECRPM(int level)
{
int result = use_DECRPM;
use_DECRPM = level;
return result;
}
typedef struct {
int mode;
char *name;
int level;
} DECRPM_DATA;
#define DATA(name,level) { name, #name, level }
static int
tst_ISO_DECRPM(MENU_ARGS)
{
int j, Pa, Ps;
char chr;
char *report;
/* *INDENT-OFF* */
DECRPM_DATA ansi_modes[] = { /* this list is sorted by code, not name */
DATA( GATM, 3 /* guarded area transfer (disabled) */),
DATA( KAM, 3 /* keyboard action */),
DATA( CRM, 3 /* control representation (setup) */),
DATA( IRM, 3 /* insert/replace */),
DATA( SRTM, 3 /* status reporting transfer (disabled) */),
DATA( ERM, 9 /* erasure mode (non-DEC) */),
DATA( VEM, 3 /* vertical editing (disabled) */),
DATA( BDSM, 9 /* bi-directional support mode (non-DEC) */),
DATA( DCSM, 9 /* device component select mode (non-DEC) */),
DATA( HEM, 3 /* horizontal editing (disabled) */),
DATA( PUM, 3 /* positioning unit (disabled) */),
DATA( SRM, 3 /* send/receive */),
DATA( FEAM, 3 /* format effector action (disabled) */),
DATA( FETM, 3 /* format effector transfer (disabled) */),
DATA( MATM, 3 /* multiple area transfer (disabled) */),
DATA( TTM, 3 /* transfer termination (disabled) */),
DATA( SATM, 3 /* selected area transfer (disabled) */),
DATA( TSM, 3 /* tabulation stop (disabled) */),
DATA( EBM, 3 /* editing boundary (disabled) */),
DATA( LNM, 3 /* line feed/new line */) };
/* *INDENT-ON* */
vt_move(1, 1);
printf("Testing %s\n", the_title);
set_tty_raw(TRUE);
set_tty_echo(FALSE);
for (j = 0; j < TABLESIZE(ansi_modes); j++) {
if (use_DECRPM < ansi_modes[j].level)
continue;
do_csi("%d$p", ansi_modes[j].mode);
report = instr();
printf("\n %3d: %-10s", ansi_modes[j].mode, ansi_modes[j].name);
if (LOG_ENABLED)
fprintf(log_fp, "Testing %s\n", ansi_modes[j].name);
chrprint(report);
if ((report = skip_csi(report)) != 0
&& sscanf(report, "%d;%d$%c", &Pa, &Ps, &chr) == 3
&& Pa == ansi_modes[j].mode
&& chr == 'y') {
switch (Ps) {
case 0:
show_result(" unknown");
break;
case 1:
show_result(" set");
break;
case 2:
show_result(" reset");
break;
case 3:
show_result(" permanently set");
break;
case 4:
show_result(" permanently reset");
break;
default:
show_result(" ?");
break;
}
} else {
show_result(SHOW_FAILURE);
}
}
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
static int
tst_DEC_DECRPM(MENU_ARGS)
{
int j, Pa, Ps;
char chr;
char *report;
char *show;
/* *INDENT-OFF* */
DECRPM_DATA dec_modes[] = { /* this list is sorted by code, not name */
DATA( DECCKM, 3 /* cursor keys */),
DATA( DECANM, 3 /* ANSI */),
DATA( DECCOLM, 3 /* column */),
DATA( DECSCLM, 3 /* scrolling */),
DATA( DECSCNM, 3 /* screen */),
DATA( DECOM, 3 /* origin */),
DATA( DECAWM, 3 /* autowrap */),
DATA( DECARM, 3 /* autorepeat */),
DATA( DECEDM, 3 /* edit */),
DATA( DECLTM, 3 /* line transmit */),
DATA( DECSCFDM,3 /* space compression field delimiter */),
DATA( DECTEM, 3 /* transmission execution */),
DATA( DECEKEM, 3 /* edit key execution */),
DATA( DECPFF, 3 /* print form feed */),
DATA( DECPEX, 3 /* printer extent */),
DATA( DECTCEM, 3 /* text cursor enable */),
DATA( DECRLM, 5 /* left-to-right */),
DATA( DECTEK, 3 /* 4010/4014 emulation */),
DATA( DECHEM, 5 /* Hebrew encoding */),
DATA( DECNRCM, 3 /* national replacement character set */),
DATA( DECGEPM, 3 /* graphics expanded print */),
DATA( DECGPCM, 3 /* graphics print color */),
DATA( DECGPCS, 3 /* graphics print color syntax */),
DATA( DECGPBM, 3 /* graphics print background */),
DATA( DECGRPM, 3 /* graphics rotated print */),
DATA( DEC131TM,3 /* VT131 transmit */),
DATA( DECNAKB, 5 /* Greek/N-A Keyboard Mapping */),
DATA( DECHCCM, 3 /* horizontal cursor coupling (disabled) */),
DATA( DECVCCM, 3 /* vertical cursor coupling */),
DATA( DECPCCM, 3 /* page cursor coupling */),
DATA( DECNKM, 3 /* numeric keypad */),
DATA( DECBKM, 3 /* backarrow key */),
DATA( DECKBUM, 3 /* keyboard usage */),
DATA( DECVSSM, 4 /* vertical split */),
DATA( DECXRLM, 3 /* transmit rate linking */),
DATA( DECKPM, 4 /* keyboard positioning */),
DATA( DECNCSM, 5 /* no clearing screen on column change */),
DATA( DECRLCM, 5 /* right-to-left copy */),
DATA( DECCRTSM,5 /* CRT save */),
DATA( DECARSM, 5 /* auto resize */),
DATA( DECMCM, 5 /* modem control */),
DATA( DECAAM, 5 /* auto answerback */),
DATA( DECCANSM,5 /* conceal answerback */),
DATA( DECNULM, 5 /* null */),
DATA( DECHDPXM,5 /* half duplex */),
DATA( DECESKM, 5 /* enable secondary keyboard language */),
DATA( DECOSCNM,5 /* overscan */),
DATA( DECFWM, 5 /* framed windows */),
DATA( DECRPL, 5 /* review previous lines */),
DATA( DECHWUM, 5 /* host wake-up mode (CRT and energy saver) */),
DATA( DECATCUM,5 /* alternate text color underline */),
DATA( DECATCBM,5 /* alternate text color blink */),
DATA( DECBBSM, 5 /* bold and blink style */),
DATA( DECECM, 5 /* erase color */),
};
/* *INDENT-ON* */
vt_move(1, 1);
printf("Testing %s\n", the_title);
set_tty_raw(TRUE);
set_tty_echo(FALSE);
for (j = 0; j < TABLESIZE(dec_modes); j++) {
if (use_DECRPM < dec_modes[j].level)
continue;
do_csi("?%d$p", dec_modes[j].mode);
report = instr();
printf("\n %3d: %-10s", dec_modes[j].mode, dec_modes[j].name);
if (LOG_ENABLED)
fprintf(log_fp, "Testing %s\n", dec_modes[j].name);
chrprint(report);
if ((report = skip_csi(report)) != 0
&& sscanf(report, "?%d;%d$%c", &Pa, &Ps, &chr) == 3
&& Pa == dec_modes[j].mode
&& chr == 'y') {
switch (Ps) {
case 0:
show = "unknown";
break;
case 1:
show = "set";
break;
case 2:
show = "reset";
break;
case 3:
show = "permanently set";
break;
case 4:
show = "permanently reset";
break;
default:
show = "?";
break;
}
} else {
show = SHOW_FAILURE;
}
show_result(show);
}
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
#undef DATA
/******************************************************************************/
int
tst_DECRPM(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "ANSI Mode Report (DECRPM)", tst_ISO_DECRPM },
{ "DEC Mode Report (DECRPM)", tst_DEC_DECRPM },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("Request Mode (DECRQM)/Report Mode (DECRPM)"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
/*
* FIXME: The VT420 manual says that a valid response begins "DCS 0 $ r",
* however I see "DCS 1 $ r" on a real VT420, consistently.
*/
int
any_decrqss(char *msg, char *func)
{
char *report;
char *show;
vt_move(1, 1);
printf("Testing DECRQSS: %s\n", msg);
set_tty_raw(TRUE);
set_tty_echo(FALSE);
decrqss(func);
report = get_reply();
vt_move(3, 10);
chrprint(report);
switch (parse_decrqss(report, func)) {
case 1:
show = "ok (valid request)";
break;
case 0:
show = "invalid request";
break;
default:
show = SHOW_FAILURE;
break;
}
show_result(show);
restore_ttymodes();
vt_move(max_lines - 1, 1);
return MENU_HOLD;
}
static int
rpt_DECSASD(MENU_ARGS)
{
return any_decrqss(the_title, "$}");
}
static int
rpt_DECSCA(MENU_ARGS)
{
return any_decrqss(the_title, "\"q");
}
static int
rpt_DECSCL(MENU_ARGS)
{
return any_decrqss(the_title, "\"p");
}
static int
rpt_DECSCPP(MENU_ARGS)
{
return any_decrqss(the_title, "$|");
}
static int
rpt_DECSLPP(MENU_ARGS)
{
return any_decrqss(the_title, "t");
}
static int
rpt_DECSSDT(MENU_ARGS)
{
return any_decrqss(the_title, "$~");
}
static int
rpt_DECSTBM(MENU_ARGS)
{
return any_decrqss(the_title, "r");
}
static int
rpt_SGR(MENU_ARGS)
{
return any_decrqss(the_title, "m");
}
static int
rpt_DECTLTC(MENU_ARGS)
{
return any_decrqss(the_title, "'s");
}
static int
rpt_DECTTC(MENU_ARGS)
{
return any_decrqss(the_title, "|");
}
int
tst_vt320_DECRQSS(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Select active status display (DECSASD)", rpt_DECSASD },
{ "Set character attribute (DECSCA)", rpt_DECSCA },
{ "Set conformance level (DECSCL)", rpt_DECSCL },
{ "Set columns per page (DECSCPP)", rpt_DECSCPP },
{ "Set lines per page (DECSLPP)", rpt_DECSLPP },
{ "Set status line type (DECSSDT)", rpt_DECSSDT },
{ "Set top and bottom margins (DECSTBM)", rpt_DECSTBM },
{ "Select graphic rendition (SGR)", rpt_SGR },
{ "Set transmit termination character (DECTTC)", rpt_DECTTC },
{ "Transmission line termination character (DECTLTC)", rpt_DECTLTC },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Status-String Reports"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
/*
* The main vt100 module tests CUP, HVP, CUF, CUB, CUU, CUD
*/
int
tst_vt320_cursor(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test Pan down (SU)", tst_SU },
{ "Test Pan up (SD)", tst_SD},
{ "Test Vertical Cursor Coupling (DECVCCM)", not_impl },
{ "Test Page Cursor Coupling (DECPCCM)", not_impl },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Cursor-Movement Tests"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
static int
tst_vt320_report_terminal(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Restore Terminal State (DECRSTS)", not_impl },
{ "Terminal State Report (DECRQTS/DECTSR)", tst_DECRQTSR },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Terminal State Reports"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
int
tst_vt320_report_presentation(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Cursor Information Report (DECCIR)", tst_DECCIR },
{ "Tab Stop Report (DECTABSR)", tst_DECTABSR },
{ "Request Mode (DECRQM)/Report Mode (DECRPM)", tst_DECRPM },
{ "Restore Presentation State (DECRSPS)", not_impl },
{ "Status-String Report (DECRQSS)", tst_vt320_DECRQSS },
{ "", 0 }
};
/* *INDENT-ON* */
int old_DECRPM = set_DECRPM(3);
do {
vt_clear(2);
__(title(0), printf("VT320 Presentation State Reports"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
set_DECRPM(old_DECRPM);
return MENU_NOHOLD;
}
/******************************************************************************/
int
tst_vt320_reports(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test VT220 features", tst_vt220_reports },
{ "Test Device Status Report (DSR)", tst_device_status },
{ "Test Presentation State Reports", tst_vt320_report_presentation },
{ "Test Terminal State Reports", tst_vt320_report_terminal },
{ "Test User-Preferred Supplemental Set (DECAUPSS)", tst_DECRQUPSS },
{ "Test Window Report (DECRPDE)", tst_DECRQDE },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Reports"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
/* vt340/vt420 & up */
static int
tst_PageMovement(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test Next Page (NP)", not_impl },
{ "Test Preceding Page (PP)", not_impl },
{ "Test Page Position Absolute (PPA)", not_impl },
{ "Test Page Position Backward (PPB)", not_impl },
{ "Test Page Position Relative (PPR)", not_impl },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("Page Format Tests"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
/* vt340/vt420 & up */
int
tst_vt320_screen(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test VT220 features", tst_vt220_screen },
{ "Test Status line (DECSASD/DECSSDT)", tst_statusline },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Screen-Display Tests"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
/******************************************************************************/
int
tst_vt320(MENU_ARGS)
{
/* *INDENT-OFF* */
static MENU my_menu[] = {
{ "Exit", 0 },
{ "Test VT220 features", tst_vt220 },
{ "Test cursor-movement", tst_vt320_cursor },
{ "Test page-movement controls", tst_PageMovement },
{ "Test reporting functions", tst_vt320_reports },
{ "Test screen-display functions", tst_vt320_screen },
{ "", 0 }
};
/* *INDENT-ON* */
do {
vt_clear(2);
__(title(0), printf("VT320 Tests"));
__(title(2), println("Choose test type:"));
} while (menu(my_menu));
return MENU_NOHOLD;
}
syntax highlighted by Code2HTML, v. 0.9.1