# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/torque.spec.in \
$(top_srcdir)/buildutils/config.mk \
$(top_srcdir)/buildutils/modulefiles.in \
$(top_srcdir)/buildutils/modulefiles.vers.in \
$(top_srcdir)/buildutils/pbs_mkdirs.in \
$(top_srcdir)/buildutils/self-extract-head-sh.in \
$(top_srcdir)/configure INSTALL buildutils/compile \
buildutils/config.guess buildutils/config.sub \
buildutils/depcomp buildutils/install-sh buildutils/ltmain.sh \
buildutils/missing buildutils/mkinstalldirs
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/buildutils/tcl.m4 \
$(top_srcdir)/buildutils/ac_create_generic_config.m4 \
$(top_srcdir)/buildutils/acx_pthread.m4 \
$(top_srcdir)/buildutils/ax_prog_dot.m4 \
$(top_srcdir)/buildutils/ac_c_bigendian_cross.m4 \
$(top_srcdir)/buildutils/t_add_rpath.m4 \
$(top_srcdir)/buildutils/tac_tcltk.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/buildutils/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/include/pbs_config.h
CONFIG_CLEAN_FILES = buildutils/pbs_mkdirs \
buildutils/self-extract-head-sh buildutils/modulefiles \
buildutils/modulefiles.vers torque.spec
am__installdirs = "$(DESTDIR)$(bindir)"
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILDCPA_FALSE = @BUILDCPA_FALSE@
BUILDCPA_TRUE = @BUILDCPA_TRUE@
BUILD_L26_CPUSETS_FALSE = @BUILD_L26_CPUSETS_FALSE@
BUILD_L26_CPUSETS_TRUE = @BUILD_L26_CPUSETS_TRUE@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH = @CYGPATH@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
DRMAA_DOCS_FALSE = @DRMAA_DOCS_FALSE@
DRMAA_DOCS_TRUE = @DRMAA_DOCS_TRUE@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_QSTAT_LIBS = @EXTRA_QSTAT_LIBS@
F77 = @F77@
FFLAGS = @FFLAGS@
GENERIC_CONFIG = @GENERIC_CONFIG@
GPERF = @GPERF@
HAVE_DOT = @HAVE_DOT@
INCLUDE_CLIENTS_FALSE = @INCLUDE_CLIENTS_FALSE@
INCLUDE_CLIENTS_TRUE = @INCLUDE_CLIENTS_TRUE@
INCLUDE_DRMAA_FALSE = @INCLUDE_DRMAA_FALSE@
INCLUDE_DRMAA_TRUE = @INCLUDE_DRMAA_TRUE@
INCLUDE_GUI_FALSE = @INCLUDE_GUI_FALSE@
INCLUDE_GUI_TRUE = @INCLUDE_GUI_TRUE@
INCLUDE_MOM_FALSE = @INCLUDE_MOM_FALSE@
INCLUDE_MOM_RCP_FALSE = @INCLUDE_MOM_RCP_FALSE@
INCLUDE_MOM_RCP_TRUE = @INCLUDE_MOM_RCP_TRUE@
INCLUDE_MOM_TRUE = @INCLUDE_MOM_TRUE@
INCLUDE_PAM_FALSE = @INCLUDE_PAM_FALSE@
INCLUDE_PAM_TRUE = @INCLUDE_PAM_TRUE@
INCLUDE_SERVER_FALSE = @INCLUDE_SERVER_FALSE@
INCLUDE_SERVER_TRUE = @INCLUDE_SERVER_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_MODULEFILES_FALSE = @INSTALL_MODULEFILES_FALSE@
INSTALL_MODULEFILES_TRUE = @INSTALL_MODULEFILES_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKE = @MAKE@
MAKEINFO = @MAKEINFO@
MODULEFILES_DIR = @MODULEFILES_DIR@
MOMLIBS = @MOMLIBS@
MY_TCLTK_INCS = @MY_TCLTK_INCS@
MY_TCLTK_LIBS = @MY_TCLTK_LIBS@
MY_TCL_INCS = @MY_TCL_INCS@
MY_TCL_LIBS = @MY_TCL_LIBS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PBSPOE = @PBSPOE@
PBSPOEO = @PBSPOEO@
PBS_DEFAULT_FILE = @PBS_DEFAULT_FILE@
PBS_DEFAULT_SERVER = @PBS_DEFAULT_SERVER@
PBS_ENVIRON = @PBS_ENVIRON@
PBS_MACH = @PBS_MACH@
PBS_SERVER_HOME = @PBS_SERVER_HOME@
PIC = @PIC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
RCP_ARGS = @RCP_ARGS@
RCP_PATH = @RCP_PATH@
READLINE_LIBS = @READLINE_LIBS@
ROFF = @ROFF@
RSH_PATH = @RSH_PATH@
SCHD_BASL_FALSE = @SCHD_BASL_FALSE@
SCHD_BASL_TRUE = @SCHD_BASL_TRUE@
SCHD_CODE = @SCHD_CODE@
SCHD_LIBS = @SCHD_LIBS@
SCHD_TYPE = @SCHD_TYPE@
SCHD_TYPE_SUBDIR = @SCHD_TYPE_SUBDIR@
SENDMAIL_CMD = @SENDMAIL_CMD@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TBL = @TBL@
TCLSH_PROG = @TCLSH_PROG@
TCL_BIN_DIR = @TCL_BIN_DIR@
TCL_DEFS = @TCL_DEFS@
TCL_EXTRA_CFLAGS = @TCL_EXTRA_CFLAGS@
TCL_INCLUDES = @TCL_INCLUDES@
TCL_LD_FLAGS = @TCL_LD_FLAGS@
TCL_LIBS = @TCL_LIBS@
TCL_LIB_FILE = @TCL_LIB_FILE@
TCL_LIB_FLAG = @TCL_LIB_FLAG@
TCL_LIB_SPEC = @TCL_LIB_SPEC@
TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
TCL_SRC_DIR = @TCL_SRC_DIR@
TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@
TCL_STUB_LIB_FLAG = @TCL_STUB_LIB_FLAG@
TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@
TCL_VERSION = @TCL_VERSION@
TK_BIN_DIR = @TK_BIN_DIR@
TK_INCLUDES = @TK_INCLUDES@
TK_LIBS = @TK_LIBS@
TK_LIB_FILE = @TK_LIB_FILE@
TK_LIB_FLAG = @TK_LIB_FLAG@
TK_LIB_SPEC = @TK_LIB_SPEC@
TK_SRC_DIR = @TK_SRC_DIR@
TK_STUB_LIB_FILE = @TK_STUB_LIB_FILE@
TK_STUB_LIB_FLAG = @TK_STUB_LIB_FLAG@
TK_STUB_LIB_SPEC = @TK_STUB_LIB_SPEC@
TK_VERSION = @TK_VERSION@
TK_XINCLUDES = @TK_XINCLUDES@
USE_TCLQSTAT_FALSE = @USE_TCLQSTAT_FALSE@
USE_TCLQSTAT_TRUE = @USE_TCLQSTAT_TRUE@
USING_RPP_FALSE = @USING_RPP_FALSE@
USING_RPP_TRUE = @USING_RPP_TRUE@
USING_SYSLOG_FALSE = @USING_SYSLOG_FALSE@
USING_SYSLOG_TRUE = @USING_SYSLOG_TRUE@
USING_TCL_FALSE = @USING_TCL_FALSE@
USING_TCL_TRUE = @USING_TCL_TRUE@
USING_TK_FALSE = @USING_TK_FALSE@
USING_TK_TRUE = @USING_TK_TRUE@
VERSION = @VERSION@
WISH_PROG = @WISH_PROG@
YACC = @YACC@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
acx_pthread_config = @acx_pthread_config@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pammoddir = @pammoddir@
prefix = @prefix@
program_prefix = @program_prefix@
program_suffix = @program_suffix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
spec_name = @spec_name@
spec_snap = @spec_snap@
spec_version = @spec_version@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
tclx_LIB_FILE = @tclx_LIB_FILE@
tclx_LIB_SPEC = @tclx_LIB_SPEC@
tclx_SRC_DIR = @tclx_SRC_DIR@
tclx_STUB_LIB_FILE = @tclx_STUB_LIB_FILE@
tclx_STUB_LIB_PATH = @tclx_STUB_LIB_PATH@
tclx_STUB_LIB_SPEC = @tclx_STUB_LIB_SPEC@
tclx_VERSION = @tclx_VERSION@
tkx_LIB_FILE = @tkx_LIB_FILE@
tkx_LIB_SPEC = @tkx_LIB_SPEC@
tkx_SRC_DIR = @tkx_SRC_DIR@
tkx_STUB_LIB_FILE = @tkx_STUB_LIB_FILE@
tkx_STUB_LIB_PATH = @tkx_STUB_LIB_PATH@
tkx_STUB_LIB_SPEC = @tkx_STUB_LIB_SPEC@
tkx_VERSION = @tkx_VERSION@
xauth_path = @xauth_path@
AUTOMAKE_OPTIONS = foreign
PBS_MKDIRS = $(SHELL) $(top_builddir)/buildutils/pbs_mkdirs
AM_CPPFLAGS = -I$(top_srcdir)/src/include
IFF_PATH = $(sbindir)/$(program_prefix)pbs_iff$(program_suffix)
DEMUX_PATH = $(sbindir)/$(program_prefix)pbs_demux$(program_suffix)
XPBS_DIR = $(libdir)/xpbs
XPBSMON_DIR = $(libdir)/xpbsmon
SUBMIT_FILTER_PATH = $(libexecdir)/qsub_filter
SUBDIRS = src doc
EXTRA_DIST = CHANGELOG INSTALL.GNU README.configure README.mpiexec \
README.torque Release_Notes torque.setup torque.spec.in \
DEVELOPMENT PBS_License.txt torque.spec \
buildutils/self-extract-head-sh.in \
buildutils/pbs_mkdirs.in buildutils/pbs_mach_type \
buildutils/config.mk \
buildutils/modulefiles.in buildutils/modulefiles.vers.in \
contrib/README.pestat contrib/README.pbstop \
contrib/README.qpeek contrib/pestat-1.0/pestat.c \
contrib/pestat-1.0/README contrib/pestat-1.0/Makefile \
contrib/README.pbs_ganglia_jobmonarch contrib/pam_authuser.tar.gz \
contrib/README.pam_authuser contrib/pbstop \
contrib/README.pbs_python contrib/README.pbs_weblite \
contrib/qpeek \
contrib/init.d/pbs_mom contrib/init.d/pbs_server contrib/init.d/pbs_sched \
contrib/init.d/suse.pbs_mom contrib/init.d/suse.pbs_server contrib/init.d/suse.pbs_sched
bin_SCRIPTS = pbs-config
DISTCLEANFILES = pbs-config
DISTCHECK_CONFIGURE_FLAGS = --with-server-home=$$dc_install_base/spool
@USING_TCL_FALSE@tclrpmflag = --without tcl
@USING_TCL_TRUE@tclrpmflag = --with tcl
@INCLUDE_GUI_FALSE@guirpmflag = --without gui
@INCLUDE_GUI_TRUE@guirpmflag = --with gui
@USING_SYSLOG_FALSE@syslogrpmflag = --without syslog
@USING_SYSLOG_TRUE@syslogrpmflag = --with syslog
@USING_RPP_FALSE@rpprpmflag = --without rpp
@USING_RPP_TRUE@rpprpmflag = --with rpp
@INCLUDE_MOM_RCP_FALSE@scprpmflag = --with scp
@INCLUDE_MOM_RCP_TRUE@scprpmflag =
RPMCC = @CC@
RPMCFLAGS = @CFLAGS@
RPMLDFLAGS = @LDFLAGS@
#
# Used by the 'packages' target below
#
# Additional package name, should be redefined to something meaningful to
# the user.
PKGNAME = package
# Directory with files that override the packaged files.
# Can be redefined on the make cmdline to a permanent location
PKGOVERRIDE = $(PWD)/pkgoverride
# temp dir for the packaged files and tarballs
PKGROOT = $(PWD)/tpackages
@INCLUDE_SERVER_TRUE@SERVER_PKG = server
@INCLUDE_MOM_TRUE@MOM_PKG = mom
@INCLUDE_CLIENTS_TRUE@CLIENTS_PKG = clients
@INCLUDE_GUI_TRUE@GUI_PKG = gui
@INCLUDE_PAM_TRUE@PAM_PKG = pam
@INCLUDE_DRMAA_TRUE@DRMAA_PKG = drmaa
ALL_PKGS = $(SERVER_PKG) $(MOM_PKG) $(CLIENTS_PKG) $(GUI_PKG) $(PAM_PKG) $(DRMAA_PKG) devel doc
all: all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/buildutils/config.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
buildutils/pbs_mkdirs: $(top_builddir)/config.status $(top_srcdir)/buildutils/pbs_mkdirs.in
cd $(top_builddir) && $(SHELL) ./config.status $@
buildutils/self-extract-head-sh: $(top_builddir)/config.status $(top_srcdir)/buildutils/self-extract-head-sh.in
cd $(top_builddir) && $(SHELL) ./config.status $@
buildutils/modulefiles: $(top_builddir)/config.status $(top_srcdir)/buildutils/modulefiles.in
cd $(top_builddir) && $(SHELL) ./config.status $@
buildutils/modulefiles.vers: $(top_builddir)/config.status $(top_srcdir)/buildutils/modulefiles.vers.in
cd $(top_builddir) && $(SHELL) ./config.status $@
torque.spec: $(top_builddir)/config.status $(srcdir)/torque.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
@list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
else :; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/. $(distdir)/buildutils $(distdir)/contrib $(distdir)/contrib/init.d $(distdir)/contrib/pestat-1.0 $(distdir)/src/drmaa
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@INSTALL_MODULEFILES_FALSE@install-data-hook:
@INSTALL_MODULEFILES_FALSE@uninstall-hook:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-exec-am: install-binSCRIPTS
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-info-am
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-libtool distclean-recursive \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binSCRIPTS install-data install-data-am \
install-data-hook install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-generic mostlyclean-libtool \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-binSCRIPTS uninstall-hook \
uninstall-info-am
snap:
$(MAKE) VERSION=$(VERSION)-snap.$${snapstamp:-`date +%Y%m%d%H%M`} dist
dist-hook:
chmod u+w $(distdir)/README.torque $(distdir)/configure $(distdir)/torque.spec
sed -e 's/TORQUE .* README .*/TORQUE $(VERSION) README (released '"`date '+%b, %d %Y'`"')/' < $(srcdir)/README.torque > $(distdir)/README.torque
sed -e 's/VERSION=.*/VERSION=$(VERSION)/' < $(srcdir)/configure > $(distdir)/configure
spec_name=torque; \
spec_version=`echo $(VERSION) | sed 's/-snap.*//'`; \
spec_snap=""; \
if test "$$spec_version" != "$(VERSION)" ;then \
spec_snap="%define snap `echo $(VERSION) | sed 's/.*-snap.//'`"; \
fi; \
sed -e "s/@spec_""name@/$$spec_name/" -e "s/@spec_""version@/$$spec_version/" \
-e "s/@spec_""snap@/$$spec_snap/" < $(srcdir)/torque.spec.in > $(distdir)/torque.spec
srpm: dist
rpmbuild -ts $(distdir).tar.gz
rpm: dist
RPMCC="$(RPMCC)" RPMCFLAGS="$(RPMCFLAGS)" RPMLDFLAGS="$(RPMLDFLAGS)" rpmbuild $(RPMOPTS) -tb $(distdir).tar.gz \
$(tclrpmflag) $(guirpmflag) $(syslogrpmflag) $(rpprpmflag) $(scprpmflag) \
--with server_name=$(PBS_DEFAULT_SERVER) \
--with homedir=$(PBS_SERVER_HOME) \
--with libdir=$(libdir) \
--with includedir=$(includedir) \
--with prefix=$(prefix)
install_server install_mom install_clients install_gui install_lib install_pam install_drmaa:
(cd src && $(MAKE) $@)
install_doc:
(cd doc && $(MAKE) $@)
install_devel: install-binSCRIPTS
(cd src && $(MAKE) $@)
packages:
@if `echo $(PKGROOT) | grep ^/ >/dev/null`;then \
echo "Building packages from $(PKGROOT)"; \
else \
echo "Error: PKGROOT must be an absolute path"; \
exit 1; \
fi
rm -rf $(PKGROOT)
mkdir $(PKGROOT)
@for d in $(ALL_PKGS);do \
proot=$(PKGROOT)/$$d; \
pname=$(PKGNAME); \
phost=$(PBS_MACH)-@host_cpu@; \
tarball=$(PKGROOT)/torque-$$pname-$$d-$$phost.tar.gz; \
pkgfile=./torque-$$pname-$$d-$$phost.sh; \
echo "Building $$pkgfile ..."; \
$(MAKE) DESTDIR=$$proot install_$$d >/dev/null || exit 1; \
case $$d in \
devel) :;; \
*) rm -f $$proot/$(libdir)/*a $$proot/$(libdir)/*.so;; \
esac; \
if test -d $(PKGOVERRIDE)/$$d ;then \
echo "Using override dir $(PKGOVERRIDE)/$$d"; \
( cd $(PKGOVERRIDE)/$$d && tar cf - . | (cd $$proot; tar xvf - ) ); \
fi; \
test $$d = gui && echo dummy > $$proot/regen-tclIndex; \
( cd $$proot; tar cf - * ) | gzip > $$tarball && \
( cd $$proot; tar cf - \
`test -f ./post-install && echo ./post-install` \
`test -f ./regen-tclIndex && echo ./regen-tclIndex` \
`test -d .$(sbindir) && echo .$(sbindir)/*` \
`test -d .$(bindir) && echo .$(bindir)/*` \
`test -d .$(libdir) && echo .$(libdir)/*` \
`test -d .$(mandir) && echo .$(mandir)/*/*` \
`test -d .$(includedir) && echo .$(includedir)/*` \
`test -d .$(pammoddir) && echo .$(pammoddir)/*` \
`test -d .$(PBS_SERVER_HOME) && echo .$(PBS_SERVER_HOME)/*` ) \
| gzip > $$tarball && \
cat ./buildutils/self-extract-head-sh > $$pkgfile && \
cat $$tarball >> $$pkgfile && \
chmod 755 $$pkgfile; \
done
@echo "Done."
@echo ""
@echo "The package files are self-extracting packages that can be copied"; \
echo "and executed on your production machines. Use --help for options.";
@INSTALL_MODULEFILES_TRUE@install-data-hook:
@INSTALL_MODULEFILES_TRUE@ $(INSTALL_DATA) -D ./buildutils/modulefiles $(DESTDIR)$(MODULEFILES_DIR)/$(PACKAGE_NAME)/$(PACKAGE_VERSION)
@INSTALL_MODULEFILES_TRUE@ $(INSTALL_DATA) ./buildutils/modulefiles.vers $(DESTDIR)$(MODULEFILES_DIR)/$(PACKAGE_NAME)/.version
@INSTALL_MODULEFILES_TRUE@uninstall-hook:
@INSTALL_MODULEFILES_TRUE@ rm -f $(DESTDIR)$(MODULEFILES_DIR)/$(PACKAGE_NAME)/$(PACKAGE_VERSION)
@INSTALL_MODULEFILES_TRUE@ rm -f $(DESTDIR)$(MODULEFILES_DIR)/$(PACKAGE_NAME)/.version
@INSTALL_MODULEFILES_TRUE@ rmdir $(DESTDIR)$(MODULEFILES_DIR)/$(PACKAGE_NAME)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1