Initialization. ## ## --------------------- ##
# Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS
sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null
2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;; esac
fi
# PATH needs CR # Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDE-
FGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right. if test "${PATH_SEPARATOR+set}" !=
set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh fi
# Support unset when possible. if ( (MAIL=60; unset MAIL) || ex-
it) >/dev/null 2>&1; then
as_unset=unset else
as_unset=false fi
# IFS # We need space, tab and new line, in precisely that order.
Quoting is # there to prevent editors from complaining about
space-tab. # (If _AS_PATH_WALK were called with IFS unset, it
would disable word # splitting by setting IFS to empty value.)
as_nl=' IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory
separator. case $0 in
*[\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do
MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset
$as_var done PS1='$ ' PS2='> ' PS4='+ '
# NLS nuisances. for as_var in LANG LANGUAGE LC_ADDRESS LC_ALL
LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MES-
SAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE
LC_TIME do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`");
then
eval $as_var=C; export $as_var
else
($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi done
# Required to use basename. if expr a : '' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*.'`" = X001; then
as_expr=expr else
as_expr=false fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- /
2>&1`" = "X/"; then
as_basename=basename else
as_basename=false fi
# Name of the executable. as_me=`$as_basename -- "$0" || $as_ex-
pr X/"$0" : '.*//][^/]*/*$' X"$0" : 'X$' X"$0" : 'X' .
2>/dev/null || echo X/"$0" |
sed '/^.*/][^/]**$/{ s//1/ q
} /^X$/{ s//1/ q }
/^X.*/{ s//1/ q }
s/.*/./; q'`
# CDPATH. $as_unset CDPATH
if test "x$CONFIG_SHELL" = x; then
if (eval ":") 2>/dev/null; then
as_have_required=yes else
as_have_required=no fi
if test $as_have_required = yes && (eval ": (as_func_return
() {
(exit ) } as_func_success () {
as_func_return 0 } as_func_failure () {
as_func_return 1 } as_func_ret_success () {
return 0 } as_func_ret_failure () {
return 1 }
exitcode=0 if as_func_success; then
: else
exitcode=1
if ( set x; as_func_ret_success y && test x =
: else
exitcode=1
echo positional parameters were not saved. fi
test xitcode = 0) || { (exit 1); exit 1; }
(
as_lineno_1=INENO
as_lineno_2=INENO
test
test ") 2> /dev/null; then
: else
as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in
/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
case $as_dir in /*) for as_base in sh bash
ksh sh5; do as_candidate_shells="$as_candi-
date_shells $as_dir/$as_base" done;;
esac done IFS=$as_save_IFS
for as_shell in $as_candidate_shells $SHELL; do #
Try only shells that exist, to save several forks. if {
test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ ("$as_shell") 2> /dev/null <<_ASEOF if test -n
"${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;; esac
fi
: _ASEOF }; then
CONFIG_SHELL=$as_shell as_have_required=yes
if { "$as_shell" 2> /dev/null <<_ASEOF if test -n
"${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST else
: else
exitcode=1
echo as_func_success failed. fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded. fi
if as_func_ret_success; then
: else
exitcode=1
echo as_func_ret_success failed. fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded. fi
if ( set x; as_func_ret_success y && test x = "$1" ); then
: else
exitcode=1
echo positional parameters were not saved. fi
test $exitcode = 0) || { (exit 1); exit 1; }
(
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit
1); exit 1; }
_ASEOF }; then
break fi
fi
done
if test "x$CONFIG_SHELL" != x; then
for as_var in BASH_ENV ENV
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset
$as_var
done
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi
if test $as_have_required = no; then
echo This script requires a shell more modern than all the
echo shells that I found on your system. Please install a
echo modern shell, or manually run the script under such a
echo shell if you do have one.
return 1 }
exitcode=0 if as_func_success; then
: else
exitcode=1
echo as_func_success failed. fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded. fi
if as_func_ret_success; then
: else
exitcode=1
echo as_func_ret_success failed. fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded. fi
if ( set x; as_func_ret_success y && test x =
: else
exitcode=1
echo positional parameters were not saved. fi
test xitcode = 0") || {
echo No shell found that supports shell functions.
echo Please tell autoconf@gnu.org about your system,
echo including any error possibly output before this
echo message }
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with
$LINENO
# uniformly replaced by the line number. The first 'sed' in-
serts a
# line-number line after each line using $LINENO; the second
'sed'
# does the real work. The second script uses 'N' to pair each
# line-number line with the line containing $LINENO, and ap-
pends
# trailing '-' during substitution so that $LINENO is not a
special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
s/-0*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun
with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of
problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to
this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit }
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null
2>&1; then
as_dirname=dirname else
as_dirname=false fi
ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*)
case `echo 'x *c*) ECHO_T=' ';; # ECHO_T is single tab
character.
*) ECHO_C=' esac;; *)
ECHO_N='-n';; esac
if expr a : '' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*.'`" = X001; then
as_expr=expr else
as_expr=false fi
rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file else
rm -f conf$$.dir
mkdir conf$$.dir fi echo >conf$$.file if ln -s conf$$.file
conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper
executable.
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f
conf$$.exe ||
as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln else
as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe
conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
test -d "$1/.";
else case $1 in
-*)set "./$1";; esac; case `ls
-ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
''' sh
' fi as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LET-
TERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 7<&0 </dev/null 6>&1
# Name of the host. # hostname on some systems (SVR3.2, Linux)
returns a bogus exit status, # so uname gets run too. ac_host-
name=`(hostname || uname -n) 2>/dev/null | sed 1q`
# # Initializations. # ac_default_prefix=/usr/local
ac_clean_files= ac_config_libobj_dir=. LIB@&t@OBJS= cross_com-
piling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CON-
FIG_SHELL-/bin/sh}
# Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACK-
AGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT=
ac_unique_file="stowES.in" ac_subst_vars='SHELL PATH_SEPARATOR
PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACK-
AGE_BUGREPORT exec_prefix prefix program_transform_name bindir
sbindir libexecdir datarootdir datadir sysconfdir sharedstatedir
localstatedir includedir oldincludedir docdir infodir htmldir
dvidir pdfdir psdir libdir localedir mandir DEFS ECHO_C ECHO_N
ECHO_T LIBS build_alias host_alias target_alias INSTALL_PROGRAM
INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AU-
TOMAKE AUTOHEADER MAKEINFO SET_MAKE PERL NROFF POD2MAN POD2HTML
MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LIB@&t@OBJS
LTLIBOBJS' ac_subst_files=''
ac_precious_vars='build_alias host_alias target_alias'
# Initialize some variables set by options. ac_init_help=
ac_init_version=false # The variables have the same names as the
options, with # dashes changed to underlines.
cache_file=/dev/null exec_prefix=NONE no_create= no_recursion=
prefix=NONE program_prefix=NONE program_suffix=NONE pro-
gram_transform_name=s,x,x, silent= site= srcdir= verbose= x_in-
cludes=NONE x_libraries=NONE
dir='${exec_prefix}/lib' localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev= ac_dashdash= for ac_option do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=c_option
ac_prev=
continue
fi
case $ac_option in
*=*) ac_optarg=`expr "X$ac_option" : '[^=]*='` ;;
*) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can di-
agnose typos.
case $ac_dashdash$ac_option in
--)
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* |
--bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi |
--cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=*
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* |
--ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd |
--dataroot | --dataroo | --dataro | --datar)
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* |
--dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-=]*'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature"
>&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
eval enable_$ac_feature=c_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi |
--exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- |
--exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-
prefi=* | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-
p=* | --exec-=* | --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm |
--ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* |
--htm=* | --ht=*)
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd |
--libexec | --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* |
--libexec=* | --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* |
--locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --local-
stated | --localstate | --localstat | --localsta | --localst |
--locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --lo-
calstated=* | --localstate=* | --localstat=* | --localsta=* |
--localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* |
--ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re |
--no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldin-
cluded | --oldinclude | --oldinclud | --oldinclu | --oldincl |
--oldinc | --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* |
-program-prefix=* | --program-prefix=* | --program-prefi=* |
--program-pref=* | --program-pre=* | --program-pr=* | --program-
p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --pro-
gram-suff | --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* |
--program-suff=* | --program-suf=* | --program-su=* | --program-
s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name | --pro-
gram-transform-nam | --program-transform-na | --program-trans-
form-n | --program-transform- | --program-transform | --pro-
gram-transfor | --program-transfo | --program-transf | --pro-
gram-trans | --program-tran | --progr-tra | --program-tr |
--program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* |
--program-transform-nam=* | --program-transform-na=* | --pro-
gram-transform-n=* | --program-transform-=* | --program-trans-
form=* | --program-transfor=* | --program-transfo=* | --pro-
gram-transf=* | --program-trans=* | --program-tran=* | --pro-
gr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* |
--pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q | -silent
| --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi |
--sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=*
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi |
--sharedstated | --sharedstate | --sharedstat | --sharedsta |
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* |
--sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd |
--sysconf | --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* |
--sysconf=* | --syscon=* | --sysco=* | --sysc=* | --sys=* |
--sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* |
--ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-=]*'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package"
>&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=c_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package"
>&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-in-
clu | --x-incl | --x-inc | --x-in | --x-i)
`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x=]*='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar"
>&2
{ (exit 1); exit 1; }; }
eval $ac_envvar=c_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
echo "$as_me: WARNING: you should use --build, --host, --tar-
get" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${tar-
get_alias=$ac_option}
;;
esac done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
{ echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; } fi
# Be sure to have absolute directory names. for ac_var in ex-
ec_prefix prefix bindir sbindir libexecdir datarootdir
datadir sysconfdir sharedstatedir localstatedir in-
cludedir oldincludedir docdir infodir htmldir dvidir
pdfdir psdir libdir localedir mandir do
eval ac_val=ac_var
case $ac_val in
[\/$]* | ?:[\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
{ echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; } done
# There might be people who depend on the old broken behavior:
`$host' # used to hold the argument of --host etc. # FIXME: To
remove some day. build=$build_alias host=$host_alias tar-
get=$target_alias
# FIXME: To remove some day. if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
{ echo "$as_me: error: Working directory cannot be determined"
>&2
{ (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di"
||
{ echo "$as_me: error: pwd does not report name of working di-
rectory" >&2
{ (exit 1); exit 1; }; }
# Find the source files, if location was not specified. if test
-z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent di-
rectory.
ac_confdir=`$as_dirname -- "$0" || $as_expr X"$0" :
'X[^/]//*[^/][^/]*/*$' X"$0" : 'X[^/]' X"$0" : 'X$'
X"$0" : 'X' . 2>/dev/null || echo X"$0" |
sed '/^X[^/]*[^/][^/]**$/{ s//1/ q
} /^X[^/].*/{ s//1/ q
} /^X$/{ s//1/ q
} /^X.*/{ s//1/ q
} s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi else
ac_srcdir_defaulted=no fi if test ! -r "$sr-
cdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
{ echo "$as_me: error: cannot find sources ($ac_unique_file) in
$srcdir" >&2
{ (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir,
but `cd $srcdir' does not work" ac_abs_confdir=`( cd
"$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: er-
ror: $ac_msg" >&2
{ (exit 1); exit 1; }; } pwd)` # When building in
place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=. fi # Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info #
mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr
"X$srcdir" : 'X[^/]' "X$srcdir" : 'X'`;; esac for ac_var in
$ac_precious_vars; do
eval ac_env_${ac_var}_set=${ac_var}+set}
eval ac_env_${ac_var}_value={ac_var}
eval ac_cv_env_${ac_var}_set=${ac_var}+set}
eval ac_cv_env_${ac_var}_value={ac_var} done
# # Report the --help message. # if test "$ac_init_help" =
"long"; then
Configuration:
-h, --help display this help and exit
--help=short display options specific to this pack-
age
--help=recursive display the short help of all the in-
cluded packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir
or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files
in PREFIX [$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in
EPREFIX [PREFIX]
By default, `make install' will install all the files in `$ac_de-
fault_prefix/bin', `$ac_default_prefix/lib' etc. You can specify
an installation prefix other than `$ac_default_prefix' using
`--prefix', for instance `--prefix=OME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PRE-
FIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PRE-
FIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/in-
clude]
--datarootdir=DIR read-only arch.-independent data root
[PREFIX/share]
--datadir=DIR read-only architecture-independent data
[DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/lo-
cale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root @<:@DATAROOT-
DIR/doc/PACKAGE@:>@
--htmldir=DIR html documentation [DOCDIR]
if test -n "$ac_init_help"; then
cat <<_ACEOF
Optional Features:
--disable-FEATURE do not include FEATURE (same as --en-
able-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-maintainer-mode enable make rules and dependencies not
useful
(and sometimes confusing) to the casual
installer
_ACEOF ac_status=$? fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: &&
continue
test -d "$ac_dir" || continue
ac_builddir=.
case "$ac_dir" in *)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^.[\/],,'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed
's,/[^\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_build-
dir=$ac_pwd$ac_dir_suffix # for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\/]* | ?:[\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_sr-
cdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for guested configure.
if test -f "$ac_srcdir/configure.gnu"; then
cat <<_ACEOF configure generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Founda-
tion gives unlimited permission to copy, distribute and modify
it. _ACEOF
exit fi cat >config.log <<_ACEOF This file contains any mes-
sages produced by compilers while running configure, to aid de-
bugging if configure makes a mistake.
It was created by $as_me, which was generated by GNU Autoconf
2.61. Invocation command line was
$ $0 $@
_ACEOF exec 5>>config.log { cat <<_ASUNAME @%:@@%:@ ---------
@%:@@%:@ @%:@@%:@ Platform. @%:@@%:@ @%:@@%:@ --------- @%:@@%:@
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m
= `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r)
2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null
|| echo unknown` uname -v = `(uname -v) 2>/dev/null || echo un-
known`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo un-
known` /bin/uname -X = `(/bin/uname -X) 2>/dev/null ||
echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null ||
echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k)
2>/dev/null || echo unknown` /usr/convex/getsysinfo =
`(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null ||
echo unknown` /bin/machine = `(/bin/machine)
2>/dev/null || echo unknown` /usr/bin/oslevel =
`(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/uni-
verse = `(/bin/universe) 2>/dev/null || echo
unknown`
_ASUNAME
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir" done IFS=$as_save_IFS
} >&5
cat >&5 <<_ACEOF
do
case $ac_arg in
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue
;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q |
-silent | --silent | --silen | --sile | --sil)
continue ;;
*'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\''/g"` ;;
esac
case $ac_pass in
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
2)
ac_configure_args1="$ac_configure_args1 '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else case $ac_arg in *=* | --config-cache
| -C | -disable-* | --disable-* | -enable-* | --enable-* |
-gas | --g* | -nfp | --nf* | -q | -quiet | --q* | -silent
| --sil* | -v | -verb* | -with-* | --with-* | -without-* |
--without-* | --x) case "$ac_configure_args0 " in
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
esac ;; -* )
ac_must_keep_next=true ;; esac
fi
ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done done $as_unset ac_configure_args0 || test "${ac_config-
ure_args0+set}" != set || { ac_configure_args0=; export ac_con-
figure_args0; } $as_unset ac_configure_args1 || test "${ac_con-
figure_args1+set}" != set || { ac_configure_args1=; export
ac_configure_args1; }
# When interrupted or exit'd, cleanup temporary files, and com-
plete # config.log. We remove comments because anyway the quotes
in there # would cause problems or look ugly. # WARNING: Use '''
to represent an apostrophe within the trap. # WARNING: Do not
start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in de-
bugging.
{
echo
cat <<_ASBOX @%:@@%:@ ---------------- @%:@@%:@ @%:@@%:@
Cache variables. @%:@@%:@ @%:@@%:@ ---------------- @%:@@%:@ _AS-
BOX
echo
# The following way of writing the cache mishandles newlines
in values, (
for ac_var in `(set) 2>&1 | sed -n '''s/^-zA-Z_][a-zA-
done
(set) 2>&1 |
case $as_nl`(ac_space=''' '''; set) 2>&1` in #(
*${as_nl}ac_space= *)
sed -n "s/'''/'''\\''''''/g; s/^\([_$as_cr_al-
num]*_cv_[_$as_cr_alnum]*\)=\(.*\)/\1='''\2'''/p"
;; #(
*)
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort )
echo
cat <<_ASBOX @%:@@%:@ ----------------- @%:@@%:@ @%:@@%:@
Output variables. @%:@@%:@ @%:@@%:@ ----------------- @%:@@%:@
_ASBOX
echo
for ac_var in $ac_subst_vars
do
eval ac_val=ac_var
case $ac_val in
*'''*) ac_val=`echo "$ac_val" | sed
"s/'''/'''\\\\''''''/g"`;;
esac
echo "$ac_var='''$ac_val'''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<_ASBOX @%:@@%:@ ------------------- @%:@@%:@ @%:@@%:@
File substitutions. @%:@@%:@ @%:@@%:@ -------------------
@%:@@%:@ _ASBOX
echo
for ac_var in $ac_subst_files
do eval ac_val=ac_var case $ac_val in
*'''*) ac_val=`echo "$ac_val" | sed
"s/'''/'''\\\\''''''/g"`;; esac echo
"$ac_var='''$ac_val'''"
done | sort
echo
fi
if test -s confdefs.h; then
cat <<_ASBOX @%:@@%:@ ----------- @%:@@%:@ @%:@@%:@
confdefs.h. @%:@@%:@ @%:@@%:@ ----------- @%:@@%:@ _ASBOX
echo
cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
_ACEOF
cat >>confdefs.h <<_ACEOF @%:@define PACKAGE_TARNAME "$PACK-
AGE_TARNAME" _ACEOF
cat >>confdefs.h <<_ACEOF @%:@define PACKAGE_VERSION "$PACK-
AGE_VERSION" _ACEOF
cat >>confdefs.h <<_ACEOF @%:@define PACKAGE_STRING "$PACK-
AGE_STRING" _ACEOF
cat >>confdefs.h <<_ACEOF @%:@define PACKAGE_BUGREPORT "$PACK-
AGE_BUGREPORT" _ACEOF
# Let the site file select an alternate cache file if it wants
to. # Prefer explicitly selected file to automatically selected
ones. if test -n "$CONFIG_SITE"; then
set x "$CONFIG_SITE" elif test "x$prefix" != xNONE; then
set x "$prefix/share/config.site" "$prefix/etc/config.site"
else
set x "$ac_default_prefix/share/config.site" "$ac_default_pre-
fix/etc/config.site" fi shift for ac_site_file do
if test -r "$ac_site_file"; then
{ echo "$as_me:$LINENO: loading site script $ac_site_file"
>&5 echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo
"$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\/]* | ?:[\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi else
{ echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo
"$as_me: creating cache $cache_file" >&6;}
>$cache_file fi
# Check that the precious variables saved in the cache have kept
the same # value. ac_cache_corrupted=false for ac_var in
$ac_precious_vars; do
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then {
echo "$as_me:$LINENO: error: `$ac_var' has changed since the pre-
vious run:" >&5 echo "$as_me: error: `$ac_var' has changed since
the previous run:" >&2;} { echo "$as_me:$LINENO: former
value: $ac_old_val" >&5 echo "$as_me: former value:
$ac_old_val" >&2;} { echo "$as_me:$LINENO: current val-
ue: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val"
>&2;} ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
*'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed
"s/'/'\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures
accuracy.
*) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
esac
fi done if $ac_cache_corrupted; then
{ echo "$as_me:$LINENO: error: changes in the environment can
compromise the build" >&5 echo "$as_me: error: changes in the en-
vironment can compromise the build" >&2;}
{ { echo "$as_me:$LINENO: error: run `make distclean' and/or
`rm $cache_file' and start over" >&5 echo "$as_me: error: run
`make distclean' and/or `rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; } fi
ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS
$CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exe-
break
elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi done if test -z "$ac_aux_dir"; then
{ { echo "$as_me:$LINENO: error: cannot find install-sh or in-
stall.sh in echo "$as_me: error: cannot find install-sh or in-
stall.sh in
{ (exit 1); exit 1; }; } fi
# These three variables are undocumented and unsupported, # and
are intended to be withdrawn in a future Autoconf release. #
They can cause serious problems if a builder's source tree is in
a directory # whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't
use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" #
Please don't use this var. ac_configure="$SHELL $ac_aux_dir/con-
figure" # Please don't use this var.
# Find a good install program. We prefer a C program (faster), #
so one script is as good as another. But avoid the broken or #
incompatible versions: # SysV /etc/install, /usr/sbin/install #
SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install #
AmigaOS /C/install, which installs bootblocks on floppy discs #
AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag #
AFS /usr/afsws/bin/install, which mishandles nonexistent args #
SVR4 /usr/ucb/install, which tries to use the nonexistent group
"staff" # OS/2's system install, which has a completely different
semantic # ./install, which can be erroneously created by make
from ./install.sh. { echo "$as_me:$LINENO: checking for a BSD-
compatible install" >&5 echo $ECHO_N "checking for a BSD-compati-
ble install... $ECHO_C" >&6; } if test -z "$INSTALL"; then if
test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6 else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
# Account for people who put trailing slashes in PATH elements.
case $as_dir/ in
./ | .// | /cC/* | /etc/* | /usr/sbin/* | /usr/etc/* |
/sbin/* | /usr/afsws/bin/* | ?:\/os2\/install\/* | ?:\/OS2\/IN-
STALL\/* | /usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as
root
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. Don't cache a
# value for INSTALL within a source directory, because that
will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi fi { echo "$as_me:$LINENO: result: $INSTALL" >&5 echo
"${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
{ echo "$as_me:$LINENO: checking whether build environment is
sane" >&5 echo $ECHO_N "checking whether build environment is
sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp >
conftestfile # Do `set' in a subshell so we don't clobber the
current shell's # arguments. Must try -L first in case configure
is actually a # symlink; some systems play weird games with the
mod time of symlinks # (eg FreeBSD returns the mod time of the
symlink's containing # directory). if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "$*" != "X $srcdir/configure conftestfile" &&
test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can
happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ { echo "$as_me:$LINENO: error: ls -t appears to fail.
Make sure there is not a broken alias in your environment" >&5
echo "$as_me: error: ls -t appears to fail. Make sure there is
not a broken alias in your environment" >&2;}
{ (exit 1); exit 1; }; }
fi
test "$2" = conftestfile
) then
# By default was `s,x,x', remove it if useless. cat <<_ACEOF
>conftest.sed s/[\$]/&&/g;s/;s,x,x,$// _ACEOF program_trans-
form_name=`echo $program_transform_name | sed -f conftest.sed` rm
-f conftest.sed
{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets KE)"
>&5 echo $ECHO_N "checking whether ${MAKE-make} sets KE)...
$ECHO_C" >&6; } set x ${MAKE-make}; ac_make=`echo "$2" | sed
's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if {
as_var=ac_cv_prog_make_${ac_make}_set; eval "test
echo $ECHO_N "(cached) $ECHO_C" >&6 else
cat >conftest.make <<_ACEOF SHELL = /bin/sh all: @echo
'@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints
"make[1]: Entering...", which would confuse us. case `${MAKE-
make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f con-
ftest.make fi if eval test c_cv_prog_make_${ac_make}_set = yes;
then
{ echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes"
>&6; }
SET_MAKE= else
{ echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6;
}
SET_MAKE="MAKE=${MAKE-make}" fi
PACKAGE=stowES
VERSION=0.5.4
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/con-
fig.status; then
{ { echo "$as_me:$LINENO: error: source directory already con-
figured; run echo "$as_me: error: source directory already con-
figured; run
{ (exit 1); exit 1; }; } fi
cat >>confdefs.h <<_ACEOF @%:@define PACKAGE "$PACKAGE" _ACEOF
cat >>confdefs.h <<_ACEOF @%:@define VERSION "$VERSION" _ACEOF
missing_dir=`cd $ac_aux_dir && pwd` { echo "$as_me:$LINENO:
checking for working aclocal" >&5 echo $ECHO_N "checking for
working aclocal... $ECHO_C" >&6; } # Run test in a subshell; some
versions of sh will print an error if # an executable is not
found, even if stderr is redirected. # Redirect stdin to placate
(autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
{ echo "$as_me:$LINENO: result: found" >&5 echo
"${ECHO_T}found" >&6; } else
AUTOCONF="$missing_dir/missing autoconf"
{ echo "$as_me:$LINENO: result: missing" >&5 echo
"${ECHO_T}missing" >&6; } fi
{ echo "$as_me:$LINENO: checking for working automake" >&5 echo
$ECHO_N "checking for working automake... $ECHO_C" >&6; } # Run
test in a subshell; some versions of sh will print an error if #
an executable is not found, even if stderr is redirected. # Re-
direct stdin to placate older versions of autoconf. Sigh. if
(automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
{ echo "$as_me:$LINENO: result: found" >&5 echo
"${ECHO_T}found" >&6; } else
AUTOMAKE="$missing_dir/missing automake"
{ echo "$as_me:$LINENO: result: missing" >&5 echo
"${ECHO_T}missing" >&6; } fi
{ echo "$as_me:$LINENO: checking for working autoheader" >&5 echo
$ECHO_N "checking for working autoheader... $ECHO_C" >&6; } # Run
test in a subshell; some versions of sh will print an error if #
an executable is not found, even if stderr is redirected. # Re-
direct stdin to placate older versions of autoconf. Sigh. if
(autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
{ echo "$as_me:$LINENO: result: found" >&5 echo
"${ECHO_T}found" >&6; } else
AUTOHEADER="$missing_dir/missing autoheader"
{ echo "$as_me:$LINENO: result: missing" >&5 echo
"${ECHO_T}missing" >&6; } fi
{ echo "$as_me:$LINENO: checking for working makeinfo" >&5 echo
$ECHO_N "checking for working makeinfo... $ECHO_C" >&6; } # Run
test in a subshell; some versions of sh will print an error if #
an executable is not found, even if stderr is redirected. # Re-
direct stdin to placate older versions of autoconf. Sigh. if
(makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
{ echo "$as_me:$LINENO: result: found" >&5 echo
"${ECHO_T}found" >&6; } else
MAKEINFO="$missing_dir/missing makeinfo"
{ echo "$as_me:$LINENO: result: missing" >&5 echo
"${ECHO_T}missing" >&6; } fi
for ac_prog in perl perl5 do
# Extract the first word of "$ac_prog", so it can be a program
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi done done IFS=$as_save_IFS
;; esac fi PERL=$ac_cv_path_PERL if test -n "$PERL"; then
{ echo "$as_me:$LINENO: result: $PERL" >&5 echo
"${ECHO_T}$PERL" >&6; } else
{ echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6;
} fi
test -n "$PERL" && break done test -n "$PERL" || PERL="false"
for ac_prog in nroff gnroff do
# Extract the first word of "$ac_prog", so it can be a program
name with args. set dummy $ac_prog; ac_word=$2 { echo
"$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "check-
ing for $ac_word... $ECHO_C" >&6; } if test
"${ac_cv_path_NROFF+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6 else
case $NROFF in
[\/]* | ?:[\/]*)
ac_cv_path_NROFF="$NROFF" # Let the user override the test with
a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_NROFF="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi done done IFS=$as_save_IFS
;; esac fi NROFF=$ac_cv_path_NROFF if test -n "$NROFF"; then
{ echo "$as_me:$LINENO: result: $NROFF" >&5 echo
"${ECHO_T}$NROFF" >&6; } else
{ echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6;
} fi
test -n "$NROFF" && break done
for ac_prog in pod2man do
# Extract the first word of "$ac_prog", so it can be a program
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_POD2MAN="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi done done IFS=$as_save_IFS
;; esac fi POD2MAN=$ac_cv_path_POD2MAN if test -n "$POD2MAN";
then
{ echo "$as_me:$LINENO: result: $POD2MAN" >&5 echo
"${ECHO_T}$POD2MAN" >&6; } else
{ echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6;
} fi
test -n "$POD2MAN" && break done test -n "$POD2MAN" ||
POD2MAN="echo"
for ac_prog in pod2html do
# Extract the first word of "$ac_prog", so it can be a program
name with args. set dummy $ac_prog; ac_word=$2 { echo
"$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "check-
ing for $ac_word... $ECHO_C" >&6; } if test
"${ac_cv_path_POD2HTML+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6 else
case $POD2HTML in
[\/]* | ?:[\/]*)
ac_cv_path_POD2HTML="$POD2HTML" # Let the user override the
test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_POD2HTML="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi done done IFS=$as_save_IFS
;; esac fi POD2HTML=$ac_cv_path_POD2HTML if test -n
"$POD2HTML"; then
{ echo "$as_me:$LINENO: result: $POD2HTML" >&5 echo
"${ECHO_T}$POD2HTML" >&6; } else
{ echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6;
} fi
test -n "$POD2HTML" && break done test -n "$POD2HTML" ||
val else
USE_MAINTAINER_MODE=no fi
{ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 echo
"${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#' else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE= fi
MAINT=$MAINTAINER_MODE_TRUE
if test "$sysconfdir" = "prefix}/etc"; then
case "$prefix" in
/) sysconfdir="/etc";;
NONE) sysconfdir="$ac_default_prefix/etc";;
*) sysconfdir="$prefix/etc";;
esac fi
ac_config_files="$ac_config_files Makefile stowES stowES.pod"
cat >confcache <<_ACEOF # This file is a shell script that caches
the results of configure # tests run on this system so they can
be shared between configure # scripts and configure runs, see
configure's option --config-cache. # It is not useful on other
systems. If it contains results you don't # want to keep, you
may remove or edit it. # # config.status only pays attention to
the cache file if you give it # the --recheck option to rerun
configure. # # `ac_cv_env_foo' variables (set or unset) will be
overridden when # loading this file, other *unset* `ac_cv_foo'
will be assigned the # following values.
_ACEOF
# The following way of writing the cache mishandles newlines in
values, # but we know of no workaround that is simple, portable,
and efficient. # So, we kill variables containing newlines. #
Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the
vars. (
for ac_var in `(set) 2>&1 | sed -n 's/^-zA-Z_][a-zA-
Z0-9_]*=.*/1/p'`; do
eval ac_val=ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable
quote
# substitution turns \\ into \, and sed turns \ into .
sed -n "s/'/'\\''/g; s/^\([_$as_cr_al-
num]*_cv_[_$as_cr_alnum]*\)=\(.*\)/\1='\2'/p"
;; #(
*)
# `set' quotes correctly as required by POSIX, so do not
add quotes.
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort ) |
sed '
/^ac_cv_env_/b end
t clear
:clear
s/^=]*=[{}].*$/test "${1+set}" = set || &/
t end
s/^=]*=$/1=${1=2}/
:end' >>confcache if diff "$cache_file" confcache >/dev/null
2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
{ echo "$as_me:$LINENO: updating cache $cache_file" >&5
echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
{ echo "$as_me:$LINENO: not updating unwritable cache
$cache_file" >&5 echo "$as_me: not updating unwritable cache
$cache_file" >&6;}
fi fi rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make
expand exec_prefix. test "x$exec_prefix" = xNONE && exec_pre-
fix='${prefix}'
# Transform confdefs.h into DEFS. # Protect against shell expan-
sion while executing Makefile rules. # Protect against Makefile
macro expansion. # # If the first sed substitution is executed
(which looks for macros that # take arguments), then branch to
the quote section. Otherwise, # look for a macro that doesn't
take arguments. ac_script=' t clear :clear s/^[ ]*#[
]*define[ ][ ]* (][^ (]*([^)]*)[ ]*/-D1=2/g t
quote s/^[ ]*#[ ]*define[ ][ ]* ][^
]*[ ]*/-D1=2/g t quote b any :quote s/[
`~#$^&*(){}\|;'''"<>?]/\&/g s/ s/]/\&/g s/$$/g H :any ${
g s/^0/ s/0 /g p } DEFS=`sed -n
"$ac_script" confdefs.h`
ac_libobjs= ac_ltlibobjs= for ac_i in : $LIB@&t@OBJS; do test
"x$ac_i" = x: && continue
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo
"$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: cre-
ating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #!
$SHELL # Generated by $as_me. # Run this file to recreate the
current configuration. # Compiler output produced by configure,
useful for debugging # configure, is in config.log if it exists.
debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=CON-
FIG_SHELL-$SHELL} _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF ## --------------------- ## ## M4sh
Initialization. ## ## --------------------- ##
# Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS
sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null
2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;; esac
fi
# PATH needs CR # Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDE-
FGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right. if test "${PATH_SEPARATOR+set}" !=
set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh fi
# Support unset when possible. if ( (MAIL=60; unset MAIL) || ex-
it) >/dev/null 2>&1; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done
IFS=$as_save_IFS
;; esac # We did not find ourselves, most probably we were
run as `sh COMMAND' # in which case we are not to be found in the
path. if test "x$as_myself" = x; then
as_myself=$0 fi if test ! -f "$as_myself"; then
echo "$as_myself: error: cannot find myself; rerun with an ab-
solute file name" >&2
{ (exit 1); exit 1; } fi
# Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL
MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset
$as_var done PS1='$ ' PS2='> ' PS4='+ '
# NLS nuisances. for as_var in LANG LANGUAGE LC_ADDRESS LC_ALL
LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MES-
SAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE
LC_TIME do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`");
then
eval $as_var=C; export $as_var
else
($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi done
# Required to use basename. if expr a : '' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*.'`" = X001; then
as_expr=expr else
as_expr=false fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- /
2>&1`" = "X/"; then
as_basename=basename else
as_basename=false fi
# Name of the executable. as_me=`$as_basename -- "$0" || $as_ex-
pr X/"$0" : '.*//][^/]*/*$' X"$0" : 'X$' X"$0" : 'X' .
2>/dev/null || echo X/"$0" |
sed '/^.*/][^/]**$/{ s//1/ q
} /^X$/{ s//1/ q }
/^X.*/{ s//1/ q }
s/.*/./; q'`
# CDPATH. $as_unset CDPATH
as_lineno_1=$LINENO
special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
# E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO'$as_cr_alnum'_].*/212/
t loop
s/-0*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun
with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of
problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to
this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit }
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null
2>&1; then
as_dirname=dirname else
as_dirname=false fi
ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*)
case `echo 'x *c*) ECHO_T=' ';; # ECHO_T is single tab
character.
*) ECHO_C=' esac;; *)
ECHO_N='-n';; esac
if expr a : '' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*.'`" = X001; then
as_expr=expr else
as_expr=false fi
rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then
as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe
conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=: else
test -d ./-p && rmdir ./-p
as_mkdir_p=false fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x' else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '''
if test -d "$1"; then
test -d "$1/.";
else case $1 in
-*)set "./$1";; esac; case `ls
-ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
''' sh
' fi as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LET-
TERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of
their # values after options handling. ac_log=" This file was
extended by $as_me, which was generated by GNU Autoconf 2.61.
Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q` "
_ACEOF
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same
conditions
--file=FILE[:TEMPLATE] instantiate the con-
figuration file FILE
Configuration files: $config_files
Report bugs to <bug-autoconf@gnu.org>."
_ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\ config.sta-
tus configured by $0, generated by GNU Autoconf 2.61,
with options \"`echo "$ac_configure_args" | sed 's/^ //;
s/[\""`/\\&/g'`\"
Copyright (C) 2006 Free Software Foundation, Inc. This con-
fig.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF # If no file are specified by the
user, then we need to provide default # value. By we need to
know if files were specified by the user. ac_need_defaults=:
while test $# != 0 do
case $1 in
--*=*)
ac_option=`expr "X$1" : 'X=]*='`
ac_optarg=`expr "X$1" : 'X[^=]*='`
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec |
--re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v |
-V )
echo "$ac_cs_version"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
esac
shift done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent" fi
_ACEOF cat >>$CONFIG_STATUS <<_ACEOF if c_cs_recheck; then
echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args
c_configure_extra_args " --no-create --no-recursion" >&6
CONFIG_SHELL=$SHELL
export CONFIG_SHELL
exec $SHELL "$0"$ac_configure_args c_configure_extra_args --no-
create --no-recursion fi
_ACEOF cat >>$CONFIG_STATUS <<_ACEOF exec 5>>config.log {
echo
sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x'
<<_ASBOX @%:@@%:@ Running $as_me. @%:@@%:@ _ASBOX
echo "$ac_log" } >&5
_ACEOF cat >>$CONFIG_STATUS <<_ACEOF _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
# Handling of arguments. for ac_config_target in $ac_config_tar-
gets do
case $ac_config_target in
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"stowES") CONFIG_FILES="$CONFIG_FILES stowES" ;;
"stowES.pod") CONFIG_FILES="$CONFIG_FILES stowES.pod" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_con-
fig_target" >&5 echo "$as_me: error: invalid argument: $ac_con-
fig_target" >&2;}
{ (exit 1); exit 1; }; };;
esac done
# If the user did not use the arguments to specify the items to
instantiate, # then the envvar interface is used. Set only those
that are not. # We use the long form for the default assignment
because of an extremely # bizarre bug on SunOS 4.1.3. if
$ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
fi
# Have a temporary directory for convenience. Make it in the
build tree # simply because there is no reason against having it
here, and in addition, # creating and moving files from /tmp can
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp") } || {
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; } }
# # Set up the sed scripts for CONFIG_FILES section. #
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h if test
-n "$CONFIG_FILES"; then
_ACEOF
ac_delim='%!_!# ' for ac_last_try in false false false false
false :; do
cat >conf$$subs.sed <<_ACEOF SHELL!$SHELL$ac_delim PATH_SEPARA-
TOR!$PATH_SEPARATOR$ac_delim PACKAGE_NAME!$PACKAGE_NAME$ac_delim
PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim PACKAGE_VERSION!$PACK-
AGE_VERSION$ac_delim PACKAGE_STRING!$PACKAGE_STRING$ac_delim
PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim exec_prefix!$ex-
ec_prefix$ac_delim prefix!$prefix$ac_delim program_trans-
form_name!$program_transform_name$ac_delim bindir!$bindir$ac_de-
lim sbindir!$sbindir$ac_delim libexecdir!$libexecdir$ac_delim
datarootdir!$datarootdir$ac_delim datadir!$datadir$ac_delim
sysconfdir!$sysconfdir$ac_delim sharedstatedir!$sharedstate-
dir$ac_delim localstatedir!$localstatedir$ac_delim in-
cludedir!$includedir$ac_delim oldincludedir!$oldincludedir$ac_de-
lim docdir!$docdir$ac_delim infodir!$infodir$ac_delim
htmldir!$htmldir$ac_delim dvidir!$dvidir$ac_delim
pdfdir!$pdfdir$ac_delim psdir!$psdir$ac_delim libdir!$lib-
dir$ac_delim localedir!$localedir$ac_delim mandir!$mandir$ac_de-
lim DEFS!$DEFS$ac_delim ECHO_C!$ECHO_C$ac_delim
ECHO_N!$ECHO_N$ac_delim ECHO_T!$ECHO_T$ac_delim LIBS!$LIBS$ac_de-
lim build_alias!$build_alias$ac_delim
host_alias!$host_alias$ac_delim target_alias!$target_alias$ac_de-
lim INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim INSTALL_SCRIPT!$IN-
STALL_SCRIPT$ac_delim INSTALL_DATA!$INSTALL_DATA$ac_delim PACK-
AGE!$PACKAGE$ac_delim VERSION!$VERSION$ac_delim ACLOCAL!$ACLO-
CAL$ac_delim AUTOCONF!$AUTOCONF$ac_delim AUTOMAKE!$AU-
TOMAKE$ac_delim AUTOHEADER!$AUTOHEADER$ac_delim MAKEINFO!$MAKEIN-
FO$ac_delim SET_MAKE!$SET_MAKE$ac_delim PERL!$PERL$ac_delim
NROFF!$NROFF$ac_delim POD2MAN!$POD2MAN$ac_delim
POD2HTML!$POD2HTML$ac_delim MAINTAINER_MODE_TRUE!$MAINTAIN-
ER_MODE_TRUE$ac_delim MAINTAINER_MODE_FALSE!$MAINTAIN-
ER_MODE_FALSE$ac_delim MAINT!$MAINT$ac_delim LIB@&t@OB-
JS!$LIB@&t@OBJS$ac_delim LTLIBOBJS!$LTLIBOBJS$ac_delim _ACEOF
if test `sed -n "s/.*$ac_delimX/p" conf$$subs.sed | grep -c X`
= 57; then
break
cat >>$CONFIG_STATUS <<_ACEOF cat >"mp/subs-1.sed" <</@[a-zA-
Z_][a-zA-Z_0-9]*@/!b end _ACEOF sed ' s/[,\&]/\&/g;
s/@/@|#_!!_#|/g s/^/s,@/; s/!/@,|#_!!_#|/ :n t n s/'"$ac_de-
lim"'$/,g/; t s/$/\/; p N; s/^.*0/; s/[,\&]/\&/g;
s/@/@|#_!!_#|/g; b n rm -f conf$$subs.sed cat >>$CONFIG_STATUS
<<_ACEOF :end s/|#_!!_#|//g CEOF$ac_eof _ACEOF
# VPATH may cause trouble with some makes, so we remove $(sr-
cdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".",
strip leading and # trailing colons and then remove the whole
line if VPATH becomes empty # (actually we leave an empty line to
preserve line numbers). if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*cdir):*/:/ s/:*sr-
cdir}:*/:/ s/:*@srcdir@:*/:/ s/^=]*=[ ]*:*/1/ s/:*$//
s/^[^=]*=[ ]*$// }' fi
cat >>$CONFIG_STATUS <<_ACEOF fi # test -n "$CONFIG_FILES"
for ac_tag in :F $CONFIG_FILES do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag
$ac_tag." >&5 echo "$as_me: error: Invalid tag $ac_tag." >&2;}
{ (exit 1); exit 1; }; };;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$tmp/stdin";;
*) # Look for the file first in the build tree, then in the
source tree # (if the path is not absolute). The abso-
lute path cannot be DOS-style, # because $ac_f cannot
contain `:'. test -f "$ac_f" || case $ac_f
sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ echo "$as_me:$LINENO: creating $ac_file" >&5 echo
"$as_me: creating $ac_file" >&6;}
fi
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin";;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" :
'X[^/]//*[^/][^/]*/*$' X"$ac_file" : 'X[^/]'
X"$ac_file" : 'X$' X"$ac_file" : 'X' . 2>/dev/null || echo
X"$ac_file" |
sed '/^X[^/]*[^/][^/]**$/{ s//1/ q
} /^X[^/].*/{ s//1/ q
} /^X$/{ s//1/ q
} /^X.*/{ s//1/ q
} s/.*/./; q'`
{ as_dir="$ac_dir"
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } ||
{
as_dirs=
while :; do
case $as_dir in #(
*'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\''/g"`;; #(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" :
'X[^/]//*[^/][^/]*/*$' X"$as_dir" : 'X[^/]' X"$as_dir" :
'X$' X"$as_dir" : 'X' . 2>/dev/null || echo X"$as_dir" |
sed '/^X[^/]*[^/][^/]**$/{ s//1/ q
} /^X[^/].*/{ s//1/ q
} /^X$/{ s//1/ q
} /^X.*/{ s//1/ q
} s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: can-
not create directory $as_dir" >&5 echo "$as_me: error: cannot
create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\/]* | ?:[\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_sr-
cdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\/$]* | ?:[\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF # If the template does not know
about datarootdir, expand it. # FIXME: This hack should be re-
moved a few years after 2.60. ac_datarootdir_hack=; ac_dataroot-
dir_seen=
case `sed -n '/datarootdir/ {
p
q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p
/@mandir@/p *datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ig-
nore the --datarootdir setting" >&5 echo "$as_me: WARNING:
$ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF cat >>$CONFIG_STATUS <<_ACEOF
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
s&\datarootdir}&$datarootdir&g' ;; esac _ACEOF
# Neutralize VPATH when `$srcdir' = `.'. # Shell code in config-
ure.ac might set extrasub. # FIXME: do we really want to main-
tain this feature? cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<_ACEOF
:t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s&@configure_input@&$config-
{ echo "$as_me:$LINENO: WARNING: $ac_file contains a reference
to the variable `datarootdir' which seems to be undefined.
Please make sure it is defined." >&5 echo "$as_me: WARNING:
$ac_file contains a reference to the variable `datarootdir' which
seems to be undefined. Please make sure it is defined." >&2;}
rm -f "$tmp/stdin"
case $ac_file in
-) cat "$tmp/out"; rm -f "$tmp/out";;
*) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
esac
;;
esac
done # for ac_tag
{ (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.sta-
tus. # config.status does its own redirection, appending to con-
fig.log. # Unfortunately, on DOS this fails, as config.log is
still kept open # by configure, so config.status won't be able to
write to it; its # output is simply discarded. So we exec the FD
to /dev/null, # effectively closing config.log, so it can be
properly (re)opened and # appended to by config.status. When
coming back to configure, we # need to make the FD available
again. if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_suc-
cess=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1,
which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; } fi
Man(1) output converted with
man2html