# Makefile.in generated by automake 1.10 from Makefile.am.
# include/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
pkgdatadir = $(datadir)/openbabel
pkgincludedir = $(includedir)/openbabel
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i386-unknown-gnu
host_triplet = i386-unknown-gnu
subdir = include
DIST_COMMON = $(am__inchiinclude_HEADERS_DIST) \
$(libopenbabelinclude_HEADERS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__inchiinclude_HEADERS_DIST = inchi_api.h
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(inchiincludedir)" \
"$(DESTDIR)$(libopenbabelincludedir)"
inchiincludeHEADERS_INSTALL = $(INSTALL_HEADER)
libopenbabelincludeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(inchiinclude_HEADERS) $(libopenbabelinclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
pkglibdir = $(libdir)/$(PACKAGE)
ACLOCAL = ${SHELL} /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/missing --run aclocal-1.10
AMTAR = ${SHELL} /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/missing --run tar
AR = ar
AS = as
AUTOCONF = sleep 9 ; true || autoconf || skipped
AUTOHEADER = sleep 9 ; true || autoheader || skipped
AUTOMAKE = sleep 9 ; true || automake || skipped
AWK = gawk
CC = cc
CCDEPMODE = depmode=gcc3
CFLAGS = -fno-common
CPP = cc -E
CPPFLAGS =
CXX = c++
CXXCPP = c++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -fno-common
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DOXYGEN =
ECHO = echo
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /usr/bin/grep -E
EXEEXT =
F77 = f77
FFLAGS =
GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c -o root -g wheel
INSTALL_DATA = install -o root -g wheel -m 444
INSTALL_PROGRAM = install -s -o root -g wheel -m 555
INSTALL_SCRIPT = install -o root -g wheel -m 555
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS =
LIBDL =
LIBOBJS =
LIBS = -lz -lm
LIBTOOL = $(SHELL) /usr/local/bin/libtool
LN_S = ln -s
LTLIBOBJS =
MAINT = #
MAKEINFO = ${SHELL} /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/missing --run makeinfo
MKDIR_P = /usr/local/bin/mkdir -p
OBJDUMP = objdump
OBJEXT =
PACKAGE = openbabel
PACKAGE_BUGREPORT = openbabel-discuss@lists.sourceforge.net
PACKAGE_NAME = Open Babel
PACKAGE_STRING = Open Babel 2.1.1
PACKAGE_TARNAME = openbabel
PACKAGE_VERSION = 2.1.1
PATH_SEPARATOR = :
PERL = /usr/local/bin/perl
PROVE = /usr/local/bin/prove
PYTHON = /usr/local/bin/python
RANLIB = ranlib
RUBY = /usr/local/bin/ruby
SET_MAKE =
SHELL = /bin/sh
STRIP = strip
SWIG =
VERSION = 2.1.1
WX_CPPFLAGS =
WX_CXXFLAGS =
WX_LIBS =
XML2_CONFIG = /usr/local/bin/xml2-config
XML_CPPFLAGS = -I/usr/local/include/libxml2 -I/usr/local/include
XML_LIBS = -L/usr/local/lib -lxml2 -lz -L/usr/local/lib -liconv -lm
abs_builddir = /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/include
abs_srcdir = /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/include
abs_top_builddir = /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1
abs_top_srcdir = /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1
ac_ct_CC =
ac_ct_CXX =
ac_ct_F77 = f77
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i386-unknown-gnu
build_alias = i386-unknown-gnu
build_cpu = i386
build_os = gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i386-unknown-gnu
host_alias = i386-unknown-gnu
host_cpu = i386
host_os = gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /mnt/gmirror/ports/science/openbabel/work/openbabel-2.1.1/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/local/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix =
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = i386-unknown-gnu
top_builddir = ..
top_srcdir = ..
SUBDIRS = openbabel
libopenbabelincludedir = $(includedir)/openbabel-2.0/openbabel
libopenbabelinclude_HEADERS = chemdrawcdx.h
inchiincludedir = $(includedir)/inchi
inchiinclude_HEADERS = inchi_api.h
EXTRA_DIST = inchi
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign include/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: # $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-inchiincludeHEADERS: $(inchiinclude_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(inchiincludedir)" || $(MKDIR_P) "$(DESTDIR)$(inchiincludedir)"
@list='$(inchiinclude_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(inchiincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(inchiincludedir)/$$f'"; \
$(inchiincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(inchiincludedir)/$$f"; \
done
uninstall-inchiincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(inchiinclude_HEADERS)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(inchiincludedir)/$$f'"; \
rm -f "$(DESTDIR)$(inchiincludedir)/$$f"; \
done
install-libopenbabelincludeHEADERS: $(libopenbabelinclude_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(libopenbabelincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libopenbabelincludedir)"
@list='$(libopenbabelinclude_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(libopenbabelincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libopenbabelincludedir)/$$f'"; \
$(libopenbabelincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libopenbabelincludedir)/$$f"; \
done
uninstall-libopenbabelincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(libopenbabelinclude_HEADERS)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(libopenbabelincludedir)/$$f'"; \
rm -f "$(DESTDIR)$(libopenbabelincludedir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(inchiincludedir)" "$(DESTDIR)$(libopenbabelincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-inchiincludeHEADERS \
install-libopenbabelincludeHEADERS
install-dvi: install-dvi-recursive
install-exec-am:
install-html: install-html-recursive
install-info: install-info-recursive
install-man:
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-inchiincludeHEADERS \
uninstall-libopenbabelincludeHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am \
install-inchiincludeHEADERS install-info install-info-am \
install-libopenbabelincludeHEADERS install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-inchiincludeHEADERS \
uninstall-libopenbabelincludeHEADERS
# .svn directories will be cleaned up by top-level dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1