[snmp_params] community="public" timeout="2" retries="2" [comments] HOST-RESOURCES-MIB::hrDeviceDescr.1 = STRING: HP LaserJet 2200 .iso.org.dod.internet.mgmt.mib-2.host.hrDevice.hrDeviceTable.hrDeviceEntry.hrDeviceDescr.1 = STRING: HP LaserJet 2200 .1.3.6.1.2.1.25.3.2.1.3.1 = STRING: HP LaserJet 2200 A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. DEVICEDESCR=HP LaserJet 2200 Printer-MIB::prtGeneralPrinterName.1 = STRING: "HP LaserJet 2200" .iso.org.dod.internet.mgmt.mib-2.printmib.prtGeneral.prtGeneralTable.prtGeneralEntry.prtGeneralPrinterName.1 = STRING: "HP LaserJet 2200" .1.3.6.1.2.1.43.5.1.1.16.1 = STRING: "HP LaserJet 2200" An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value for the MIB-II 'SysName' object. PRINTERNAME=HP LaserJet 2200 HOST-RESOURCES-MIB::hrDeviceStatus.1 = INTEGER: unknown(1), running(2), warning(3), testing(4), down(5) .iso.org.dod.internet.mgmt.mib-2.host.hrDevice.hrDeviceTable.hrDeviceEntry.hrDeviceStatus.1 = INTEGER: running(2) .1.3.6.1.2.1.25.3.2.1.5.1 = INTEGER: running(2) The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are known. The warning(3) state indicates that agent has been informed of an unusual error condition by the operational software (e.g., a disk device driver) but that the device is still 'operational'. An example would be a high number of soft errors on a disk. A value of testing(4), indicates that the device is not available for use because it is in the testing state. The state of down(5) is used only when the agent has been informed that the device is not available for any use. DEVICESTATUS=running HOST-RESOURCES-MIB::hrPrinterStatus.1 = INTEGER: other(1), unknown(2), idle(3), printing(4), warmup(5) .iso.org.dod.internet.mgmt.mib-2.host.hrDevice.hrPrinterTable.hrPrinterEntry.hrPrinterStatus.1 = INTEGER: idle(3) .1.3.6.1.2.1.25.3.5.1.1.1 = INTEGER: idle(3) The current status of this printer device. PRINTERSTATUS=idle Printer-MIB::prtMarkerLifeCount.1.1 = Counter32: 93118 .iso.org.dod.internet.mgmt.mib-2.printmib.prtMarker.prtMarkerTable.prtMarkerEntry.prtMarkerLifeCount.1.1 = Counter32: 93118 .1.3.6.1.2.1.43.10.2.1.4.1.1 = Counter32: 93118 prtmarkerlifecount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML TOTAL-ENGINE-PAGE-COUNT. The total engine page count is kept in NVRAM however the NVRAM value is only updated every 10 impressions. NOTE: The value returned by this OID will be incremented every page but if power is lost between NVRAM updates, up to 9 impressions of the page count may be lost. The counter will be reset to zero after 999999 pages. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by two." PAGECOUNT=93118 Printer-MIB::prtConsoleDisplayBufferText.1.1 = STRING: "READY " .iso.org.dod.internet.mgmt.mib-2.printmib.prtConsoleDisplayBuffer.prtConsoleDisplayBufferTable.prtConsoleDisplayBufferEntry.prtConsoleDisplayBufferText.1.1 = STRING: "READY " .1.3.6.1.2.1.43.16.5.1.2.1.1 = STRING: "READY " The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to one of the LineText strings, the agent should make that line displayable if a physical display is present. Writing a zero length string clears the line. It is an implementation-specific matter as to whether the agent allows a line to be overwritten before it has been cleared. Printer generated strings shall be in the localization specified by prtConsoleLocalization. Management Application generated strings should be localized by the Management Application. STATUS=READY Printer-MIB::prtAlertSeverityLevel.1.1 = INTEGER: warning(4) .iso.org.dod.internet.mgmt.mib-2.printmib.prtAlert.prtAlertTable.prtAlertEntry.prtAlertSeverityLevel.1.1 = INTEGER: warning(4) .1.3.6.1.2.1.43.18.1.1.2.1.1 = INTEGER: warning(4) other(1), critical(3), warning(4), warningBinaryChangeEvent(5) The level of severity of this alert table entry. The printer determines the severity level assigned to each entry in the table. A critical alert is binary by nature and definition. A warning is defined to be a non-critical alert. The original and most common warning is unary. The binary warning was added later and given a more distinguished name. Printer-MIB::prtAlertGroup.1.3 = INTEGER: mediaPath(13) .iso.org.dod.internet.mgmt.mib-2.printmib.prtAlert.prtAlertTable.prtAlertEntry.prtAlertGroup.1.3 = INTEGER: mediaPath(13) .1.3.6.1.2.1.43.18.1.1.4.1.3 = INTEGER: mediaPath(13) other(1), hostResourcesMIBStorageTable(3), hostResourcesMIBDeviceTable(4), generalPrinter(5), cover(6), localization(7), input(8), output(9), marker(10), markerSupplies(11), markerColorant(12), mediaPath(13), channel(14), interpreter(15), consoleDisplayBuffer(16), consoleLights(17), alert(18), finDevice(30), finSupply(31), finSupplyMediaInput(32), finAttributeTable(33) The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of types of sub-units. Wherever possible, these enumerations match the sub-identifier that identifies the relevant table in the printer MIB. Printer-MIB::prtAlertDescription.1.3 = STRING: "Power Saver" .iso.org.dod.internet.mgmt.mib-2.printmib.prtAlert.prtAlertTable.prtAlertEntry.prtAlertDescription.1.3 = STRING: "Power Saver" .1.3.6.1.2.1.43.18.1.1.8.1.3 = STRING: "Power Saver" NOTE: Alert type codes have been added for the host resources MIB storage table and device table. These additional types are for situations in which the printer's storage and device objects must generate alerts (and possibly traps for critical alerts)." STATUS=alert SeverityLevel (AlertGroup) AlertDescription - if the alert status level is critical Printer-MIB::prtMarkerPowerOnCount.1.1 = Counter32: 1 .iso.org.dod.internet.mgmt.mib-2.printmib.prtMarker.prtMarkerTable.prtMarkerEntry.prtMarkerPowerOnCount.1.1 = Counter32: 1 .1.3.6.1.2.1.43.10.2.1.5.1.1 = Counter32: 1 The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUnit. POWERONCOUNT=1 PCL-TOTAL-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5.0 pcl-total-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of PCL pages printed by the device. Additional information: The PCL page count is kept in NVRAM, and the NVRAM value is updated at least every 10 pages. NOTE: The value returned by this object will be incremented every page but if power is lost between NVRAM updates, up to 9 pages of the page count may be lost. The page count counter will be reset to zero after 16,777,215 (2^24-1) pages. The page count is incremented when a sheet of media is pulled from an input tray. A duplex printed sheet will cause this counter to be incremented by two." POSTSCRIPT-TOTAL-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5.0 postscript-total-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of PostScript pages printed by the device. Additional information: This object is only supported if the PostScript option is installed. In The LJ Series 4000 the count is kept in NVRAM, and the NVRAM value is updated at least every 10 sheets. NOTE: The value returned by this object will be incremented every sheet but if power is lost between NVRAM updates up to 9 sheets of the count may be lost. The counter will be reset to zero after 16,777,215 (2^24-1) pages. " DUPLEX-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22.0 duplex-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not marks are made on the page. The POS will indicate if the value is kept in NVRAM. Additional information: In The LJ Series 4000 the count is kept in NVRAM however the NVRAM value is only updated every 10 sheets. NOTE: The value returned by this object will be incremented every sheet but if power is lost between NVRAM updates up to 9 sheets of the count may be lost. The counter will be reset to zero after 16,777,215 (2^24-1) pages. " Note: from LJ2200 MIB: TOTAL-ENGINE-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5.0 total-engine-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page count rolls over to zero. Additional information: This object is stored in NVRAM. The maximum value of this count is 1000000 before it rolls over to zero." TOTAL-COLOR-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7.0 total-color-page-count OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Total number of color pages printed by the device. Additional information: Any page with one or more color pixels is counted as a color page. Pages that only contain black marks are not counted by this object. The valid range of this object is 0 to 2^24-1. When the number of color pages printed exceeds the maximum color page count, the value will roll to zero. (Realistically, this should never happen since that value is mo re than 16 times the rated life of the engine.) A duplexed sheet of media will cause the counter to be incremented by two." TOTAL-MONO-PAGE-COUNT .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6.0 [printerdata default] alert_oid =".1.3.6.1.2.1.43.18.1.1" alertseveritylevel = ".1.3.6.1.2.1.43.18.1.1.2.1" alertdescription = ".1.3.6.1.2.1.43.18.1.1.8.1" alertgroup = ".1.3.6.1.2.1.43.18.1.1.4.1" #pagecount_oid = ".1.3.6.1.2.1.43.10.2.1.4.1" #poweroncount_oid = ".1.3.6.1.2.1.43.10.2.1.5.1.1" devicestatus_oid = ".1.3.6.1.2.1.25.3.2.1.5.1" printerstatus_oid = ".1.3.6.1.2.1.25.3.5.1.1.1" #display_oid = ".1.3.6.1.2.1.43.16.5.1.2.1.1" # call this the status OID status_oid = ".1.3.6.1.2.1.43.16.5.1.2.1.1" devicedescr_oid = ".1.3.6.1.2.1.25.3.2.1.3.1" printername_oid = ".1.3.6.1.2.1.43.5.1.1.16.1" total_engine_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5" prtmarkerlifecount_oid = ".1.3.6.1.2.1.43.10.2.1.4.1.1" duplex_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22" pcl_total_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5" postscript_total_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5" total_color_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7" total_mono_page_count_oid = ".1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6" # set this to the list of valid page count oids pagecounters="total_engine_page_count_oid prtmarkerlifecount_oid" required="devicestatus_oid printerstatus_oid" [status devicestatus_oid] other="1" unknown="2" idle="3" printing="4" warmup="5" [status printerstatus_oid ] other="1" unknown="2" idle="3" printing="4" warmup="5" [status alertseveritylevel ] other="1" critical="3" warning="4" # warningBinaryChangeEvent="5" statuschange="5" [status alertgroup ] other="1" hostResourcesMIBStorageTable="3" hostResourcesMIBDeviceTable="4" generalPrinter="5" cover="6" localization="7" input="8" output="9" marker="10" markerSupplies="11" markerColorant="12" mediaPath="13" channel="14" interpreter="15" consoleDisplayBuffer="16" consoleLights="17" alert="18" finDevice="30"