# Makefile.in generated automatically by automake 1.5 from Makefile.am.
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = .
top_srcdir = ../..
prefix =
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/xorp
pkglibdir = $(libdir)/xorp
pkgincludedir = $(includedir)/xorp
top_builddir = ../..
ACLOCAL = ${SHELL} /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/missing --run aclocal
AUTOCONF = ${SHELL} /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/missing --run autoconf
AUTOMAKE = ${SHELL} /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/missing --run automake
AUTOHEADER = ${SHELL} /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/missing --run autoheader
INSTALL = /usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM = install -s -o root -g wheel -m 555
INSTALL_DATA = install -o root -g wheel -m 444
INSTALL_SCRIPT = install -o root -g wheel -m 555
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,^,i386-unknown-gnu-,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = i386-unknown-gnu
host_triplet = i386-unknown-gnu
AMTAR = ${SHELL} /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/missing --run tar
AS = @AS@
AWK = gawk
CC = cc
CLI_CURSES_LIB = -lcurses
CPP = cc -E
CXX = c++
CXXCPP = c++ -E
DEPDIR = .deps
DLLTOOL = @DLLTOOL@
EXEEXT =
FLOWER_MALLOC =
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = config/ltconfig config/ltmain.sh
LN_S = ln -s
MAINT = #
MIBS =
OBJDUMP = @OBJDUMP@
OBJEXT =
PACKAGE = xorp
PYTHON = python2.2
PYTHON_BUILD =
RANLIB = ranlib
VERSION = 1.4
am__include = include
am__quote =
install_sh = /mnt/gmirror/ports/net/xorp/work/xorp-1.4/config/install-sh
TARGETS = $(DOCS:%=%.ps) $(DOCS:%=%.pdf)
DOCS_LATEX = $(DOCS:%=%_LATEX)
DOCS_FIGURES = $(DOCS:%=%_FIGURES)
DOCS_BBL = $(DOCS:%=%_BBL)
PSANON = sed -f $(top_srcdir)/utils/fig2dev-ps-anon.sed
#
# The files to remove with ``gmake clean''
# TODO: don't remove *.foo; instead consider DOCS_LATEX to select the files
# to remove.
#
CLEANFILES = *.aux *.bbl *.blg *.dvi *.lof *.log *.lot *.toc $(TARGETS)
#
# The path to any additional TeX input files
#
TEXINPUTS_PATH = $(top_srcdir)/docs/tex:
#
# The rules to generate files based on their suffixes
#
SUFFIXES = .tex .bbl .dvi .ps .pdf .fig .ps .eps
# -- Document Names
DOCS = pim_arch
# -- Document Sources
pim_arch_LATEX = ../tex/xorp.bib pim_arch.tex
pim_arch_FIGURES = figs/pim_design_overview.eps
subdir = docs/pim
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CFLAGS = -fno-common
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES =
DIST_COMMON = Makefile.am Makefile.in
all: all-am
.SUFFIXES:
.SUFFIXES: .tex .bbl .dvi .ps .pdf .fig .ps .eps
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/docs/mk/Makefile.doc.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign docs/pim/Makefile
Makefile: # $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
uninstall-info-am:
tags: TAGS
TAGS:
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
$(mkinstalldirs) "$(distdir)/$$dir"; \
fi; \
if test -d $$d/$$file; then \
cp -pR $$d/$$file $(distdir) \
|| exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool uninstall uninstall-am uninstall-info-am
all: docs
docs: $(DOCS) $(TARGETS)
$(DOCS): %: %.dvi
#
# If any of the *.bib *.tex or figures files is newer,
# then run latex twice on the master *.tex file.
# If there is *.lof *.lot or *.toc file, then run latex three times instead.
# Note that we don't check whether the *.lof *.lot *.toc files are newer
# than the *.dvi file because in practice the timestamps of those files
# are same as the timestamp of the *.dvi file, and therefore the *.dvi file
# is always regenerated.
#
$(DOCS:%=%.dvi): %.dvi: %_FIGURES %_BBL %_LATEX
@is_newer=NO; \
latex_files0="$($(subst -,_,$*)_LATEX)"; \
latex_files=""; \
for i in $$latex_files0 ; do \
latex_files="$$latex_files $(srcdir)/$$i"; \
done; \
bbl_files="$*.bbl"; \
figures_files0="$($(subst -,_,$*)_FIGURES)"; \
figures_files=""; \
for i in $$figures_files0 ; do \
figures_files="$$figures_files $(srcdir)/$$i"; \
done; \
dep_files="$$latex_files $$bbl_files $$figures_files"; \
for i in $$dep_files ; do \
if [ $$i = $*.bbl -a ! -f $$i ] ; then continue; fi; \
if [ ! -f $$i ] ; then \
echo ERROR: cannot build $@: missing dependency file $$i; \
exit 1; \
fi; \
if [ ! $$i -ot $@ ] ; then \
is_newer="YES"; \
fi; \
done; \
if [ $$is_newer = "YES" ] ; then \
for i in $$dep_files ; do \
file_prefix=`echo $$i | sed 's/\.tex$$//'`; \
if [ -z $$file_prefix ] ; then continue; fi; \
if [ $$file_prefix = $$i ] ; then continue; fi; \
if [ $$file_prefix != $(srcdir)/$* ] ; then continue; fi; \
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $$i); \
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $$i); \
if [ -f $*.lof -o -f $*.lot -o -f $*.toc ] ; then \
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $$i); \
fi; \
done; \
fi;
#
# If any of the *.bib or *.tex files is newer than the *.bbl file,
# then run latex and bibtex on the master *.tex file.
# Note that we need to run bibtex on the filename with stripped .tex suffix.
#
$(DOCS_BBL): %_BBL: %_LATEX
@bbl_filename=$*.bbl; \
is_newer=NO; \
has_bib=NO; \
latex_files0="$($(subst -,_,$<))"; \
latex_files=""; \
for i in $$latex_files0 ; do \
latex_files="$$latex_files $(srcdir)/$$i"; \
done; \
dep_files="$$latex_files"; \
for i in $$dep_files ; do \
if [ ! $$i -ot $$bbl_filename ] ; then \
is_newer="YES"; \
fi; \
file_prefix=`echo $$i | sed 's/\.bib$$//'`; \
if [ -z $$file_prefix ] ; then continue; fi; \
if [ $$file_prefix != $$i ] ; then \
has_bib=YES; \
fi; \
done; \
if [ $$is_newer = "YES" -a $$has_bib = "YES" ] ; then \
for i in $$dep_files ; do \
file_prefix=`echo $$i | sed 's/\.tex$$//'`; \
if [ -z $$file_prefix ] ; then continue; fi; \
if [ $$file_prefix = $$i ] ; then continue; fi; \
if [ $$file_prefix != $(srcdir)/$* ] ; then continue; fi; \
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $$i); \
bibtex $*; \
done; \
fi;
#
# If any of the *.fig files is newer than the corresponding *.ps or *.eps,
# then run fig2dev to (re)create that file.
#
$(DOCS_FIGURES):
@figures_files0="$($(subst -,_,$@))"; \
figures_files=""; \
for i in $$figures_files0 ; do \
figures_files="$$figures_files $(srcdir)/$$i"; \
done; \
dep_files="$$figures_files"; \
for i in $$dep_files ; do \
file_prefix=`echo $$i | sed 's/\.eps$$//'`; \
if [ -z $$file_prefix ] ; then continue; fi; \
if [ $$file_prefix = $$i ] ; then continue; fi; \
fig_src=$$file_prefix.fig; \
if [ -f $$fig_src ] ; then \
if [ ! $$fig_src -ot $$i ] ; then \
fig2dev -Leps $$fig_src | $(PSANON) > $$i; \
fi; \
fi; \
done; \
for i in $$dep_files ; do \
file_prefix=`echo $$i | sed 's/\.ps$$//'`; \
if [ -z $$file_prefix ] ; then continue; fi; \
if [ $$file_prefix = $$i ] ; then continue; fi; \
fig_src=$$file_prefix.fig; \
if [ -f $$fig_src ] ; then \
if [ ! $$fig_src -ot $$i ] ; then \
fig2dev -z Letter -Lps $$fig_src | $(PSANON) >$$i; \
fi; \
fi; \
done
$(DOCS_LATEX):
@true
.tex.dvi:
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $< $@)
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $< $@)
.tex.bbl:
(TEXINPUTS="${TEXINPUTS_PATH}"; export TEXINPUTS; latex $< $@)
bibtex $*
.dvi.ps:
dvips $< -o $@
.ps.pdf:
ps2pdf $< $@
.fig.ps:
fig2dev -z Letter -Lps $< | $(PSANON) > $@
.fig.eps:
fig2dev -Leps $< | $(PSANON) > $@
################################################################
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1