# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# LaTeX -*-Makefile-*-
#
# Copyright (c) 2001-2003 The Trustees of Indiana University.
# All rights reserved.
# Copyright (c) 1998-2001 University of Notre Dame.
# All rights reserved.
# Copyright (c) 1994-1998 The Ohio State University.
# All rights reserved.
#
# This file is part of the LAM/MPI software package. For license
# information, see the LICENSE file in the top level directory of the
# LAM/MPI source distribution.
#
# $Id: Makefile.am,v 1.7 2003/09/25 16:15:04 jsquyres Exp $
#
# This first section contains macros whose values that you need to
# fill in.
#
# -*- makefile -*-
#
# Copyright (c) 2001-2003 The Trustees of Indiana University.
# All rights reserved.
# Copyright (c) 1998-2001 University of Notre Dame.
# All rights reserved.
# Copyright (c) 1994-1998 The Ohio State University.
# All rights reserved.
#
# This file is part of the LAM/MPI software package. For license
# information, see the LICENSE file in the top level directory of the
# LAM/MPI source distribution.
#
# $Id: Makefile.options,v 1.6 2003/01/26 21:58:24 jsquyres Exp $
#
# LaTeX -*-Makefile-*-
#
# Copyright (c) 2001-2003 The Trustees of Indiana University.
# All rights reserved.
# Copyright (c) 1998-2001 University of Notre Dame.
# All rights reserved.
# Copyright (c) 1994-1998 The Ohio State University.
# All rights reserved.
#
# This file is part of the LAM/MPI software package. For license
# information, see the LICENSE file in the top level directory of the
# LAM/MPI source distribution.
#
# $Id: Makefile.latex,v 1.9 2003/09/21 23:52:37 jsquyres Exp $
#
# This first section contains macros whose values that you need to
# fill in.
#
# MAIN_TEX: In order to build your document, fill in the MAIN_TEX
# macro with the name of your main .tex file -- the one that you
# invoke LaTeX on.
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/Makefile.latex $(srcdir)/version.tex.in \
$(top_srcdir)/config/Makefile.options
subdir = doc/user
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/config/cxx_find_exception_flags.m4 \
$(top_srcdir)/config/cxx_find_template_repository.m4 \
$(top_srcdir)/config/cxx_find_template_parameters.m4 \
$(top_srcdir)/config/cxx_have_bool.m4 \
$(top_srcdir)/config/cxx_have_exceptions.m4 \
$(top_srcdir)/config/cxx_have_nothrow_new.m4 \
$(top_srcdir)/config/cxx_have_stl.m4 \
$(top_srcdir)/config/cxx_have_true_false.m4 \
$(top_srcdir)/config/lam_functions.m4 \
$(top_srcdir)/config/lam_ansi_protos.m4 \
$(top_srcdir)/config/lam_bproc_setup.m4 \
$(top_srcdir)/config/lam_case_sensitive_fs_setup.m4 \
$(top_srcdir)/config/lam_config_fd_passing.m4 \
$(top_srcdir)/config/lam_config_subdir.m4 \
$(top_srcdir)/config/lam_config_subdir_args.m4 \
$(top_srcdir)/config/lam_check_bsd43_fd_passing.m4 \
$(top_srcdir)/config/lam_check_bsd44_fd_passing.m4 \
$(top_srcdir)/config/lam_check_fd_setsize.m4 \
$(top_srcdir)/config/lam_check_func.m4 \
$(top_srcdir)/config/lam_check_mpiexec.m4 \
$(top_srcdir)/config/lam_check_optflags.m4 \
$(top_srcdir)/config/lam_check_prefix_memcpy.m4 \
$(top_srcdir)/config/lam_check_prototype.m4 \
$(top_srcdir)/config/lam_check_pthread_pids.m4 \
$(top_srcdir)/config/lam_check_sizeof_struct_stat_members.m4 \
$(top_srcdir)/config/lam_check_stdc.m4 \
$(top_srcdir)/config/lam_check_svr4_fd_passing.m4 \
$(top_srcdir)/config/lam_check_type.m4 \
$(top_srcdir)/config/lam_check_typeof_getsockopt_optlen.m4 \
$(top_srcdir)/config/lam_check_typeof_recvfrom_len.m4 \
$(top_srcdir)/config/lam_config_pthreads.m4 \
$(top_srcdir)/config/lam_config_threads.m4 \
$(top_srcdir)/config/lam_config_solaris_threads.m4 \
$(top_srcdir)/config/lam_get_alignment.m4 \
$(top_srcdir)/config/lam_get_fortran_alignment.m4 \
$(top_srcdir)/config/lam_get_fortran_alignment_nofail.m4 \
$(top_srcdir)/config/lam_get_fortran_ext_name_convention.m4 \
$(top_srcdir)/config/lam_get_libtool_linker_flags.m4 \
$(top_srcdir)/config/lam_get_shmmax.m4 \
$(top_srcdir)/config/lam_get_sizeof.m4 \
$(top_srcdir)/config/lam_get_sizeof_fortran_type.m4 \
$(top_srcdir)/config/lam_get_sizeof_fortran_type_nofail.m4 \
$(top_srcdir)/config/lam_get_version.m4 \
$(top_srcdir)/config/lam_make_stripped_flags.m4 \
$(top_srcdir)/config/lam_mutex_pshared.m4 \
$(top_srcdir)/config/lam_memory_setup.m4 \
$(top_srcdir)/config/lam_prog_f77.m4 \
$(top_srcdir)/config/lam_setup_cc.m4 \
$(top_srcdir)/config/lam_setup_cxx.m4 \
$(top_srcdir)/config/lam_setup_optional_fortran_type.m4 \
$(top_srcdir)/config/lam_check_sysv_semaphores.m4 \
$(top_srcdir)/config/lam_check_sysv_shmem.m4 \
$(top_srcdir)/config/lam_wrapper_extra_ldflags.m4 \
$(top_srcdir)/config/lam_cxx_bindings_setup.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/share/include/lam_config.h
CONFIG_CLEAN_FILES = version.tex
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CASE_SENSITIVE_FS_FALSE = @CASE_SENSITIVE_FS_FALSE@
CASE_SENSITIVE_FS_TRUE = @CASE_SENSITIVE_FS_TRUE@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAGS_WITHOUT_OPTFLAGS = @CFLAGS_WITHOUT_OPTFLAGS@
CLEANFILES = @CLEANFILES@
CP = @CP@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXCPPFLAGS = @CXXCPPFLAGS@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CXXLDFLAGS = @CXXLDFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_LDFLAGS = @EXTRA_LDFLAGS@
F77 = @F77@
F77_BUILD_DIR = @F77_BUILD_DIR@
F77_LTPLIB = @F77_LTPLIB@
FC = @FC@
FFLAGS = @FFLAGS@
IMPID_DIR = @IMPID_DIR@
IMPI_DIR = @IMPI_DIR@
IMPI_LIB = @IMPI_LIB@
IMPI_OBJS = @IMPI_OBJS@
IMPI_SERVER = @IMPI_SERVER@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LAM_ALPHA_VERSION = @LAM_ALPHA_VERSION@
LAM_BETA_VERSION = @LAM_BETA_VERSION@
LAM_BINDIR = @LAM_BINDIR@
LAM_CONFIGURE_DATE = @LAM_CONFIGURE_DATE@
LAM_CONFIGURE_HOST = @LAM_CONFIGURE_HOST@
LAM_CONFIGURE_USER = @LAM_CONFIGURE_USER@
LAM_CXX_TEMPLATE_REPOSITORY = @LAM_CXX_TEMPLATE_REPOSITORY@
LAM_EXEC_PREFIX = @LAM_EXEC_PREFIX@
LAM_INDEXOF_FORTRAN_INTEGER8 = @LAM_INDEXOF_FORTRAN_INTEGER8@
LAM_INDEXOF_FORTRAN_REAL16 = @LAM_INDEXOF_FORTRAN_REAL16@
LAM_MAJOR_VERSION = @LAM_MAJOR_VERSION@
LAM_MANDIR = @LAM_MANDIR@
LAM_MINOR_VERSION = @LAM_MINOR_VERSION@
LAM_PREFIX = @LAM_PREFIX@
LAM_RELEASE_VERSION = @LAM_RELEASE_VERSION@
LAM_SSI_boot_ALL_SUBDIRS = @LAM_SSI_boot_ALL_SUBDIRS@
LAM_SSI_boot_DYNAMIC_SUBDIRS = @LAM_SSI_boot_DYNAMIC_SUBDIRS@
LAM_SSI_boot_STATIC_LTLIBS = @LAM_SSI_boot_STATIC_LTLIBS@
LAM_SSI_boot_STATIC_SUBDIRS = @LAM_SSI_boot_STATIC_SUBDIRS@
LAM_SSI_coll_ALL_SUBDIRS = @LAM_SSI_coll_ALL_SUBDIRS@
LAM_SSI_coll_DYNAMIC_SUBDIRS = @LAM_SSI_coll_DYNAMIC_SUBDIRS@
LAM_SSI_coll_STATIC_LTLIBS = @LAM_SSI_coll_STATIC_LTLIBS@
LAM_SSI_coll_STATIC_SUBDIRS = @LAM_SSI_coll_STATIC_SUBDIRS@
LAM_SSI_crlam_ALL_SUBDIRS = @LAM_SSI_crlam_ALL_SUBDIRS@
LAM_SSI_crlam_DYNAMIC_SUBDIRS = @LAM_SSI_crlam_DYNAMIC_SUBDIRS@
LAM_SSI_crlam_STATIC_LTLIBS = @LAM_SSI_crlam_STATIC_LTLIBS@
LAM_SSI_crlam_STATIC_SUBDIRS = @LAM_SSI_crlam_STATIC_SUBDIRS@
LAM_SSI_crmpi_ALL_SUBDIRS = @LAM_SSI_crmpi_ALL_SUBDIRS@
LAM_SSI_crmpi_DYNAMIC_SUBDIRS = @LAM_SSI_crmpi_DYNAMIC_SUBDIRS@
LAM_SSI_crmpi_STATIC_LTLIBS = @LAM_SSI_crmpi_STATIC_LTLIBS@
LAM_SSI_crmpi_STATIC_SUBDIRS = @LAM_SSI_crmpi_STATIC_SUBDIRS@
LAM_SSI_rpi_ALL_SUBDIRS = @LAM_SSI_rpi_ALL_SUBDIRS@
LAM_SSI_rpi_DYNAMIC_SUBDIRS = @LAM_SSI_rpi_DYNAMIC_SUBDIRS@
LAM_SSI_rpi_STATIC_LTLIBS = @LAM_SSI_rpi_STATIC_LTLIBS@
LAM_SSI_rpi_STATIC_SUBDIRS = @LAM_SSI_rpi_STATIC_SUBDIRS@
LAM_SVN_VERSION = @LAM_SVN_VERSION@
LAM_TOP_BUILDDIR = @LAM_TOP_BUILDDIR@
LAM_TOP_SRCDIR = @LAM_TOP_SRCDIR@
LAM_VERSION = @LAM_VERSION@
LAM_WANT_DARWIN7MALLOC_FALSE = @LAM_WANT_DARWIN7MALLOC_FALSE@
LAM_WANT_DARWIN7MALLOC_TRUE = @LAM_WANT_DARWIN7MALLOC_TRUE@
LAM_WANT_INSTALL_MPIEXEC_FALSE = @LAM_WANT_INSTALL_MPIEXEC_FALSE@
LAM_WANT_INSTALL_MPIEXEC_TRUE = @LAM_WANT_INSTALL_MPIEXEC_TRUE@
LAM_WANT_PTMALLOC2_FALSE = @LAM_WANT_PTMALLOC2_FALSE@
LAM_WANT_PTMALLOC2_TRUE = @LAM_WANT_PTMALLOC2_TRUE@
LAM_WANT_PTMALLOC_FALSE = @LAM_WANT_PTMALLOC_FALSE@
LAM_WANT_PTMALLOC_TRUE = @LAM_WANT_PTMALLOC_TRUE@
LDFLAGS = @LDFLAGS@
LIBLAM_EXTRA_LDFLAGS = @LIBLAM_EXTRA_LDFLAGS@
LIBLAM_EXTRA_LIBS = @LIBLAM_EXTRA_LIBS@
LIBLTDL = @LIBLTDL@
LIBLTDL_SUBDIR = @LIBLTDL_SUBDIR@
LIBMPI_EXTRA_LDFLAGS = @LIBMPI_EXTRA_LDFLAGS@
LIBMPI_EXTRA_LIBS = @LIBMPI_EXTRA_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTDLINCL = @LTDLINCL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MPIF_H_PMPI_W_FUNCS = @MPIF_H_PMPI_W_FUNCS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RM = @RM@
ROMIO_ARCH_FLAGS = @ROMIO_ARCH_FLAGS@
ROMIO_USER_FLAGS = @ROMIO_USER_FLAGS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHELL_CMD = @SHELL_CMD@
STRIP = @STRIP@
TOTALVIEW_DEBUG_FLAGS = @TOTALVIEW_DEBUG_FLAGS@
TOTALVIEW_DLL_DIR = @TOTALVIEW_DLL_DIR@
VERSION = @VERSION@
WANT_CPPFILE_FALSE = @WANT_CPPFILE_FALSE@
WANT_CPPFILE_TRUE = @WANT_CPPFILE_TRUE@
WANT_DEPRECATED_EXECUTABLE_NAMES_FALSE = @WANT_DEPRECATED_EXECUTABLE_NAMES_FALSE@
WANT_DEPRECATED_EXECUTABLE_NAMES_TRUE = @WANT_DEPRECATED_EXECUTABLE_NAMES_TRUE@
WANT_FORTRAN_FALSE = @WANT_FORTRAN_FALSE@
WANT_FORTRAN_TRUE = @WANT_FORTRAN_TRUE@
WANT_IMPI_BUILD_FALSE = @WANT_IMPI_BUILD_FALSE@
WANT_IMPI_BUILD_TRUE = @WANT_IMPI_BUILD_TRUE@
WANT_LIBLTDL_FALSE = @WANT_LIBLTDL_FALSE@
WANT_LIBLTDL_TRUE = @WANT_LIBLTDL_TRUE@
WANT_MPI2CPP_FALSE = @WANT_MPI2CPP_FALSE@
WANT_MPI2CPP_TRUE = @WANT_MPI2CPP_TRUE@
WANT_MPI_STUBS_FALSE = @WANT_MPI_STUBS_FALSE@
WANT_MPI_STUBS_TRUE = @WANT_MPI_STUBS_TRUE@
WANT_PREFIX_MEMCPY_FALSE = @WANT_PREFIX_MEMCPY_FALSE@
WANT_PREFIX_MEMCPY_TRUE = @WANT_PREFIX_MEMCPY_TRUE@
WANT_PROFILE_BUILD_FALSE = @WANT_PROFILE_BUILD_FALSE@
WANT_PROFILE_BUILD_TRUE = @WANT_PROFILE_BUILD_TRUE@
WANT_ROMIO_FALSE = @WANT_ROMIO_FALSE@
WANT_ROMIO_TRUE = @WANT_ROMIO_TRUE@
WANT_TRILLIUM_INSTALL_FALSE = @WANT_TRILLIUM_INSTALL_FALSE@
WANT_TRILLIUM_INSTALL_TRUE = @WANT_TRILLIUM_INSTALL_TRUE@
WRAPPER_EXTRA_CFLAGS = @WRAPPER_EXTRA_CFLAGS@
WRAPPER_EXTRA_CXXFLAGS = @WRAPPER_EXTRA_CXXFLAGS@
WRAPPER_EXTRA_FFLAGS = @WRAPPER_EXTRA_FFLAGS@
WRAPPER_EXTRA_LDFLAGS = @WRAPPER_EXTRA_LDFLAGS@
WRAPPER_EXTRA_LIBS = @WRAPPER_EXTRA_LIBS@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
ac_prefix_program = @ac_prefix_program@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
AUTOMAKE_OPTIONS = foreign dist-bzip2
MAIN_TEX = user.tex
# OTHER_SRC_FILES: Put in the names of all the other files that your
# thesis depends on (e.g., other .tex files, figures, etc.) in the
# OTHER_SRC_FILES macro. This is ensure that whenever one of the
# "other" files changes, "make" will rebuild your paper.
LISTINGS_FILES = \
listings.cfg \
listings.sty \
lstdoc.sty \
lstlang1.sty \
lstlang2.sty \
lstlang3.sty \
lstmisc.sty \
lstpatch.sty
OTHER_SRC_FILES = \
defs.tex \
version.tex \
titlepage.tex \
audience.tex \
introduction.tex \
release-notes.tex \
getting-started.tex \
mpi-details.tex \
ssi.tex \
commands.tex \
lam-ssi.tex \
mpi-ssi.tex \
debuggers.tex \
troubleshooting.tex \
misc.tex \
bibliography.tex \
$(LISTINGS_FILES)
# Bibtex source files
BIBTEX_SOURCES = refs.bib
# xfig figures. .eps and .pdf files will be automatically generated
# from these.
FIG_FILES =
PNG_FILES = \
lam-logo.png \
ptl-logo.png
# Required commands
LATEX = latex
PDFLATEX = pdflatex
DVIPS = dvips
MAKEINDEX = makeindex
BIBTEX = bibtex
FIG2DEV = fig2dev
PNGTOPNM = pngtopnm
PNMTOPS = pnmtops
#########################################################################
#
# You should not need to edit below this line
#
#########################################################################
SUFFIXES = .tex .dvi .ps .pdf .fig .eps .png
MAIN_DVI = $(MAIN_TEX:.tex=.dvi)
MAIN_PS = $(MAIN_TEX:.tex=.ps)
MAIN_PDF = $(MAIN_TEX:.tex=.pdf)
MAIN_BBL = $(MAIN_TEX:.tex=.bbl)
MAIN_BASENAME = $(MAIN_TEX:.tex=)
EPS_FILES = $(PNG_FILES:.png=.eps)
EPS_FIG_FILES = $(FIG_FILES:.fig=.eps)
PDF_FIG_FILES = $(FIG_FILES:.fig=.pdf)
#
# Search Strings
#
REFERENCES = "(There were undefined references|Rerun to get (cross-references|the bars) right)"
NEEDINDEX = "Writing index file"
RERUNBIB = "No file.*\.bbl|Citation.*undefined|LaTeX Warning: Label\(s\) may"
# The majority of stuff to build the PS/PDF files are included in a
# separate Makefile so that they can be invoked directly at "make
# dist" time without needing to generate a real "Makefile" from
# Makefile.am.
# Now ensure that all the relevant files get picked up in the tarball.
EXTRA_DIST = $(MAIN_TEX) $(OTHER_SRC_FILES) $(FIG_FILES) $(PNG_FILES) $(BIBTEX_SOURCES) Makefile.latex
all: all-am
.SUFFIXES:
.SUFFIXES: .tex .dvi .ps .pdf .fig .eps .png
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/Makefile.options $(srcdir)/Makefile.latex $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/user/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign doc/user/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
version.tex: $(top_builddir)/config.status $(srcdir)/version.tex.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../../config
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf-am:
ps-am:
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
dist-hook distclean distclean-generic distclean-libtool \
distdir dvi dvi-am html html-am info info-am install \
install-am install-data install-data-am install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
uninstall uninstall-am uninstall-info-am
#
# Some common target names
# Note that the default target is "ps"
#
ps: $(MAIN_PS)
pdf: $(MAIN_PDF)
#
# Make the dependencies so that things build when they need to
#
$(MAIN_PS): $(MAIN_DVI)
$(MAIN_DVI): $(MAIN_TEX) $(CITE_TEX) $(OTHER_SRC_FILES) $(EPS_FIG_FILES) $(EPS_FILES) $(MAIN_BBL)
$(MAIN_PDF): $(MAIN_TEX) $(CITE_TEX) $(OTHER_SRC_FILES) $(PDF_FIG_FILES) $(PNG_FILES) $(MAIN_BBL)
#
# General rules
#
.fig.eps:
$(FIG2DEV) -L eps $< $@
.fig.pdf:
$(FIG2DEV) -L pdf $< $@
.png.eps:
$(PNGTOPNM) $< | $(PNMTOPS) -noturn > $*.eps
# Only run bibtex if latex has already been run (i.e., if there is
# already a .aux file). If .aux file does not exist, then bibtex will
# be run during the .tex.dvi / .tex.pdf rules. We don't run latex
# here to generate the .aux file because a) we don't know whether to
# run latex or pdflatex, and b) the dependencies are wrong for
# pdflatex because we may need to generate some pdf images first.
$(MAIN_BBL): $(BIBTEX_SOURCES)
@if (test -f $(MAIN_BASENAME).aux); then \
echo "### Running BibTex"; \
$(BIBTEX) $(MAIN_BASENAME); \
fi
# Main workhorse for .tex -> .dvi. Run latex, makeindex, and bibtex
# as necessary.
.tex.dvi:
echo "### Running LaTeX (1)"
$(LATEX) $*
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running LaTeX to fix references (2)"; \
($(LATEX) $*); \
fi
@if (egrep $(NEEDINDEX) $*.log >/dev/null); then \
echo "### Running makeindex to generate index"; \
$(MAKEINDEX) $*; \
echo "### Running LaTeX after generating index"; \
$(LATEX) $*; \
fi
@if (egrep $(RERUNBIB) $*.log >/dev/null); then \
echo "### Running BibTex because references changed"; \
$(BIBTEX) $(MAIN_BASENAME); \
echo "### Running LaTeX after generating bibtex"; \
$(LATEX) $*; \
fi
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running LaTeX to fix references (3)"; \
($(LATEX) $*); \
fi
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running LaTeX to fix references (4)"; \
($(LATEX) $*); \
fi
.dvi.ps:
$(DVIPS) -o $*.ps $*
# Main workhorse for .tex -> .pdf. Run latex, makeindex, and bibtex
# as necessary. Essentially the same as .tex.dvi, except
# s/latex/pdflatex/g.
.tex.pdf:
echo "### Running pdfLaTeX (1)"
$(PDFLATEX) $*
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running pdfLaTeX to fix references (2)"; \
($(PDFLATEX) $*); \
fi
@if (egrep $(NEEDINDEX) $*.log >/dev/null); then \
echo "### Running makeindex to generate index"; \
$(MAKEINDEX) $*; \
echo "### Running pdfLaTeX after generating index"; \
$(PDFLATEX) $*; \
fi
@if (egrep $(RERUNBIB) $*.log >/dev/null); then \
echo "### Running BibTex because references changed"; \
$(BIBTEX) $(MAIN_BASENAME); \
echo "### Running pdfLaTeX after generating bibtex"; \
$(PDFLATEX) $*; \
fi
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running pdfLaTeX to fix references (3)"; \
($(PDFLATEX) $*); \
fi
@if (egrep $(REFERENCES) $*.log > /dev/null); then \
echo "### Running pdfLaTeX to fix references (4)"; \
($(PDFLATEX) $*); \
fi
#
# Standard targets
#
clean:
/bin/rm -f *~ *.bak *%
/bin/rm -f *.log *.aux *.dvi *.blg *.toc *.bbl *.lof *.lot \
*.ind *.idx *.ilg *.int *.out \
$(MAIN_PS) $(MAIN_DVI) $(MAIN_PDF) \
$(EPS_FILES) $(EPS_FIG_FILES) $(PDF_FIG_FILES)
dist-hook: pdf
mv user.pdf $(DESTDIR)$(distdir)/../.
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1