# Makefile.in generated by automake 1.7.2 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = .

pkgdatadir = $(datadir)/which
pkglibdir = $(libdir)/which
pkgincludedir = $(includedir)/which
top_builddir = .

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c -o root -g wheel
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
ACLOCAL = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run autoconf
AUTOHEADER = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run autoheader
AUTOMAKE = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run automake-1.7
AWK = gawk
CC = cc
CCDEPMODE = depmode=gcc3
CFLAGS = -fno-common
CPP = cc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
INSTALL_DATA = install  -o root -g wheel -m 444
INSTALL_PROGRAM = install  -s -o root -g wheel -m 555
INSTALL_SCRIPT = install  -o root -g wheel -m 555
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = 
LTLIBOBJS = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKEINFO = ${SHELL} /mnt/gmirror/ports/misc/gwhich/work/which-2.16/missing --run makeinfo
OBJEXT = 
PACKAGE = which
PACKAGE_BUGREPORT = 
PACKAGE_NAME = 
PACKAGE_STRING = 
PACKAGE_TARNAME = 
PACKAGE_VERSION = 
PATH_SEPARATOR = :
RANLIB = ranlib
SET_MAKE = 
SHELL = /bin/sh
STRIP = 
VERSION = 2.16
ac_ct_CC = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = 
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__include = include
am__quote = 
bindir = ${exec_prefix}/bin
build_alias = i386-unknown-gnu
datadir = ${prefix}/share
exec_prefix = ${prefix}
host_alias = i386-unknown-gnu
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /mnt/gmirror/ports/misc/gwhich/work/which-2.16/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = 
program_transform_name = s,^,,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target_alias = i386-unknown-gnu
AUTOMAKE_OPTIONS = no-texinfo.tex

SUBDIRS = tilde .

BUILT_SOURCES = 
EXTRA_DIST = LICENSE $(man_MANS) $(BUILT_SOURCES) README.alias README EXAMPLES which.1
DISTCLEANFILES = config.cache config.log config.h

bin_PROGRAMS = which

which_SOURCES = \
	getopt.c \
	getopt1.c \
	bash.c \
	which.c \
	bash.h \
	sys.h \
	getopt.h \
	posixstat.h


LDADD = $(top_builddir)/tilde/libtilde.a
info_TEXINFOS = which.texinfo
man_MANS = which.1

MAINTAINERCLEANFILES = aclocal.m4 Makefile.in config.h.in stamp-h.in configure \
        ChangeLog EXAMPLES which-2.spec index.html cvslog-*.html README \
	texinfo2man which.1 install-sh missing mkinstalldirs \
	config.cache config.log depcomp compile config.status

subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = maintMakefile
bin_PROGRAMS = which$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS)

am_which_OBJECTS = getopt.$(OBJEXT) getopt1.$(OBJEXT) bash.$(OBJEXT) \
	which.$(OBJEXT)
which_OBJECTS = $(am_which_OBJECTS)
which_LDADD = $(LDADD)
which_DEPENDENCIES = $(top_builddir)/tilde/libtilde.a
which_LDFLAGS =

DEFAULT_INCLUDES =  -I. -I$(srcdir) -I.
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
DEP_FILES = ./$(DEPDIR)/bash.Po ./$(DEPDIR)/getopt.Po \
	./$(DEPDIR)/getopt1.Po ./$(DEPDIR)/which.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES = $(which_SOURCES)
am__TEXINFO_TEX_DIR = $(srcdir)
INFO_DEPS = which.info
DVIS = which.dvi
PDFS = which.pdf
PSS = which.ps
TEXINFOS = which.texinfo

NROFF = nroff
MANS = $(man_MANS)

RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
	ps-recursive install-info-recursive uninstall-info-recursive \
	all-recursive install-data-recursive install-exec-recursive \
	installdirs-recursive install-recursive uninstall-recursive \
	check-recursive installcheck-recursive
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
	Makefile.in NEWS acinclude.m4 aclocal.m4 compile config.h.in \
	configure configure.in depcomp install-sh maintMakefile.in \
	mdate-sh missing mkinstalldirs stamp-vti version.texi
DIST_SUBDIRS = $(SUBDIRS)
SOURCES = $(which_SOURCES)

all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .dvi .info .o .obj .pdf .ps .texinfo

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno
$(srcdir)/Makefile.in: # Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  Makefile
Makefile: # $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)

$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: # $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4): # configure.in acinclude.m4
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in: # $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	touch $(srcdir)/config.h.in

distclean-hdr:
	-rm -f config.h stamp-h1
maintMakefile: $(top_builddir)/config.status maintMakefile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
	   $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
	  rm -f $(DESTDIR)$(bindir)/$$f; \
	done

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
which$(EXEEXT): $(which_OBJECTS) $(which_DEPENDENCIES) 
	@rm -f which$(EXEEXT)
	$(LINK) $(which_LDFLAGS) $(which_OBJECTS) $(which_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT) core *.core

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/bash.Po
include ./$(DEPDIR)/getopt.Po
include ./$(DEPDIR)/getopt1.Po
include ./$(DEPDIR)/which.Po

distclean-depend:
	-rm -rf ./$(DEPDIR)

.c.o:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
	  -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
	fi
#	source='$<' object='$@' libtool=no \
#	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
#	$(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
	  -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
	fi
#	source='$<' object='$@' libtool=no \
#	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \
#	$(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f '$<' || echo '$(srcdir)/'`$<

.texinfo.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) `test -f '$<' || echo '$(srcdir)/'`$<

.texinfo.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) `test -f '$<' || echo '$(srcdir)/'`$<
which.info: which.texinfo version.texi
which.dvi: which.texinfo version.texi
which.pdf: which.texinfo version.texi
version.texi: # stamp-vti
stamp-vti: which.texinfo $(top_srcdir)/configure
	@(dir=.; test -f ./which.texinfo || dir=$(srcdir); \
	set `$(SHELL) $(srcdir)/mdate-sh $$dir/which.texinfo`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp version.texi \
	  || (echo "Updating version.texi"; \
	      cp vti.tmp version.texi)
	-@rm -f vti.tmp
	@cp version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
#	-rm -f stamp-vti version.texi
TEXI2DVI = texi2dvi

TEXI2PDF = $(TEXI2DVI) --pdf --batch
DVIPS = dvips
.dvi.ps:
	$(DVIPS) -o $@ $<

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  (if cd $(DESTDIR)$(infodir); then \
	     echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9])"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f which.aux which.cp which.cps which.fn which.fns which.ky which.kys \
	  which.log which.pg which.pgs which.tmp which.toc which.tp \
	  which.tps which.vr which.vrs which.dvi which.pdf which.ps

maintainer-clean-aminfo:
	list='$(INFO_DEPS)'; for i in $$list; do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

man1dir = $(mandir)/man1
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ETAGS = etags
ETAGSFLAGS =

CTAGS = ctags
CTAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = .
distdir = $(PACKAGE)-$(VERSION)

am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }

GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkinstalldirs) $(distdir)/.
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	$(am__remove_distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
	  && rm -f $(distdir).tar.gz \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	  sed 'h;s/./=/g;p;x;p;x'
distuninstallcheck:
	cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) config.h
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-compile distclean-depend \
	distclean-generic distclean-hdr distclean-local distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-exec-am: install-binPROGRAMS

install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
	      $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\
	  done; \
	else : ; fi
install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
	mostlyclean-generic mostlyclean-vti

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man

uninstall-info: uninstall-info-recursive

uninstall-man: uninstall-man1

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
	clean-binPROGRAMS clean-generic clean-recursive ctags \
	ctags-recursive dist dist-all dist-gzip dist-info distcheck \
	distclean distclean-compile distclean-depend distclean-generic \
	distclean-hdr distclean-local distclean-recursive \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am dvi-recursive info info-am info-recursive install \
	install-am install-binPROGRAMS install-data install-data-am \
	install-data-recursive install-exec install-exec-am \
	install-exec-recursive install-info install-info-am \
	install-info-recursive install-man install-man1 \
	install-recursive install-strip installcheck installcheck-am \
	installdirs installdirs-am installdirs-recursive \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-recursive \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-compile mostlyclean-generic mostlyclean-recursive \
	mostlyclean-vti pdf pdf-am pdf-recursive ps ps-am ps-recursive \
	tags tags-recursive uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-info-am \
	uninstall-info-recursive uninstall-man uninstall-man1 \
	uninstall-recursive


# --------------- Maintainer's Section

dist-local: which README EXAMPLES which.1

distclean-local:
	rm -rf .deps autom4te-*.cache which-*.tar.gz

#include $(srcdir)/maintMakefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: