#! /bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=${CONFIG_SHELL-/bin/sh}
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)$' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
  	  /^X\/\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`


# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi


  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
  # Find who we are.  Look in the path if we contain no path at all
  # relative or not.
  case $0 in
    *[\\/]* ) as_myself=$0 ;;
    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensible to this).
  . ./$as_me.lineno
  # Exit status is that of the last command.
  exit
}


case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_executable_p="test -f"

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH

exec 6>&1

# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.  Logging --version etc. is OK.
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF

This file was extended by plplot $as_me 5.6.1, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

_CSEOF
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
echo >&5
config_files=" bindings/c++/Makefile examples/c++/Makefile examples/c++/Makefile.examples bindings/f77/Makefile bindings/f77/configurable.f examples/f77/Makefile examples/f77/Makefile.examples bindings/f95/Makefile examples/f95/Makefile examples/f95/Makefile.examples bindings/python/Makefile examples/python/Makefile examples/python/plplot_python_start.py bindings/java/Makefile bindings/java/config.java examples/java/Makefile examples/java/Makefile.examples bindings/octave/Makefile bindings/octave/plplot_octave.h bindings/octave/PLplot/Makefile bindings/octave/PLplot/plplot_octave_path.m bindings/octave/PLplot/support/Makefile bindings/octave/demos/Makefile bindings/octave/misc/Makefile bindings/tcl/Makefile bindings/tcl/pkgIndex.tcl examples/tcl/Makefile lib/Makefile lib/nn/Makefile lib/csa/Makefile pkgcfg/Makefile pkgcfg/gen-pc-files.pl bindings/gnome2/Makefile bindings/gnome2/lib/Makefile bindings/gnome2/python/Makefile bindings/tk/Makefile bindings/tk/pkgIndex.tcl bindings/tk-x-plat/pkgIndex.tcl examples/tk/Makefile examples/tk/Makefile.examples test/Makefile test/plplot-test.sh test/test_c.sh test/test_cxx.sh test/test_f77.sh test/test_f95.sh test/test_octave.sh test/test_python.sh test/test_java.sh test/test_tcl.sh test/test_perl.sh doc/docbook/Makefile doc/docbook/src/Makefile doc/docbook/src/plplotdoc.xml doc/docbook/src/plplotdoc-html.dsl doc/docbook/src/plplotdoc-print.dsl doc/docbook/bin/api2man.pl doc/docbook/www/index.html.in Makefile fonts/Makefile src/Makefile include/Makefile data/Makefile bindings/Makefile cf/Makefile drivers/Makefile examples/Makefile examples/c/Makefile examples/c/Makefile.examples examples/perl/Makefile utils/Makefile scripts/Makefile doc/Makefile scripts/plplot-config"
config_headers=" config.h include/plConfig.h include/plDevs.h"
config_commands=" depfiles default-1 default-5"

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."
ac_cs_version="\
plplot config.status 5.6.1
configured by ./configure, generated by GNU Autoconf 2.59,
  with options \"'--disable-cgm' '--disable-java' '--disable-octave' '--with-gd-incdir=/usr/local/include' '--with-gd-libdir=/usr/local/lib' '--with-freetype-font-dir=/usr/local' '--enable-f95' '--with-pthreads' '--disable-linuxvga' '--disable-python' '--disable-gcw' '--disable-itcl' '--disable-tcl' '--disable-tk' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'CPPFLAGS=-I/usr/local/include' 'CXXFLAGS=-fno-common' 'CXX=c++' 'F77=gfortran42' 'FC=gfortran42' 'FFLAGS=-O' 'LDFLAGS=-L/usr/local/lib' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu' --enable-ltdl-convenience\"

Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=.
INSTALL="/usr/bin/install -c -o root -g wheel"
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "x$1" : 'x\([^=]*\)='`
    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  -*)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  *) # This is not an option, so the user has probably given explicit
     # arguments.
     ac_option=$1
     ac_need_defaults=false;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --vers* | -V )
    echo "$ac_cs_version"; exit 0 ;;
  --he | --h)
    # Conflict between --help and --header
    { { echo "$as_me:$LINENO: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit 0 ;;
  --debug | --d* | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1" ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

if $ac_cs_recheck; then
  echo "running /bin/sh ./configure " '--disable-cgm' '--disable-java' '--disable-octave' '--with-gd-incdir=/usr/local/include' '--with-gd-libdir=/usr/local/lib' '--with-freetype-font-dir=/usr/local' '--enable-f95' '--with-pthreads' '--disable-linuxvga' '--disable-python' '--disable-gcw' '--disable-itcl' '--disable-tcl' '--disable-tk' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'CPPFLAGS=-I/usr/local/include' 'CXXFLAGS=-fno-common' 'CXX=c++' 'F77=gfortran42' 'FC=gfortran42' 'FFLAGS=-O' 'LDFLAGS=-L/usr/local/lib' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu' --enable-ltdl-convenience $ac_configure_extra_args " --no-create --no-recursion" >&6
  exec /bin/sh ./configure '--disable-cgm' '--disable-java' '--disable-octave' '--with-gd-incdir=/usr/local/include' '--with-gd-libdir=/usr/local/lib' '--with-freetype-font-dir=/usr/local' '--enable-f95' '--with-pthreads' '--disable-linuxvga' '--disable-python' '--disable-gcw' '--disable-itcl' '--disable-tcl' '--disable-tk' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'CPPFLAGS=-I/usr/local/include' 'CXXFLAGS=-fno-common' 'CXX=c++' 'F77=gfortran42' 'FC=gfortran42' 'FFLAGS=-O' 'LDFLAGS=-L/usr/local/lib' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu' --enable-ltdl-convenience $ac_configure_extra_args --no-create --no-recursion
fi

#
# INIT-COMMANDS section.
#

AMDEP_TRUE="" ac_aux_dir="cf"
has_perl=found

pldb_cv_xml_sax=


pldb_cv_xml_parser=


pldb_cv_xml_dom=

has_onsgmls=found
has_db2x_texixml=
has_db2x_xsltproc=
has_openjade=
has_jadetex=
has_pdfjadetex=
has_dvips=
has_makeinfo=

pldb_cv_dsssl_dtd=
dtd_dsssl_dtd="\"-//James Clark//DTD DSSSL Style Sheet//EN\""


pldb_cv_html_ss=
dtd_html_ss="\"-//Norman Walsh//DOCUMENT DocBook HTML Stylesheet//EN\""


pldb_cv_print_ss=
dtd_print_ss="\"-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN\""


pldb_cv_db_dtd=
dtd_db_dtd="\"-//OASIS//DTD DocBook XML V4.2//EN\""


pldb_cv_xml_parser_perlsax=


pldb_cv_xml_writer=


print=print; html=html; info=info; man=man


for ac_config_target in $ac_config_targets
do
  case "$ac_config_target" in
  # Handling of arguments.
  "bindings/c++/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/c++/Makefile" ;;
  "examples/c++/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/c++/Makefile" ;;
  "examples/c++/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/c++/Makefile.examples" ;;
  "bindings/f77/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/f77/Makefile" ;;
  "bindings/f77/configurable.f" ) CONFIG_FILES="$CONFIG_FILES bindings/f77/configurable.f" ;;
  "examples/f77/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/f77/Makefile" ;;
  "examples/f77/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/f77/Makefile.examples" ;;
  "bindings/f95/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/f95/Makefile" ;;
  "examples/f95/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/f95/Makefile" ;;
  "examples/f95/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/f95/Makefile.examples" ;;
  "bindings/python/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/python/Makefile" ;;
  "examples/python/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/python/Makefile" ;;
  "examples/python/plplot_python_start.py" ) CONFIG_FILES="$CONFIG_FILES examples/python/plplot_python_start.py" ;;
  "bindings/java/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/java/Makefile" ;;
  "bindings/java/config.java" ) CONFIG_FILES="$CONFIG_FILES bindings/java/config.java" ;;
  "examples/java/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/java/Makefile" ;;
  "examples/java/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/java/Makefile.examples" ;;
  "bindings/octave/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/Makefile" ;;
  "bindings/octave/plplot_octave.h" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/plplot_octave.h" ;;
  "bindings/octave/PLplot/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/PLplot/Makefile" ;;
  "bindings/octave/PLplot/plplot_octave_path.m" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/PLplot/plplot_octave_path.m" ;;
  "bindings/octave/PLplot/support/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/PLplot/support/Makefile" ;;
  "bindings/octave/demos/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/demos/Makefile" ;;
  "bindings/octave/misc/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/octave/misc/Makefile" ;;
  "bindings/tcl/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/tcl/Makefile" ;;
  "bindings/tcl/pkgIndex.tcl" ) CONFIG_FILES="$CONFIG_FILES bindings/tcl/pkgIndex.tcl" ;;
  "examples/tcl/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/tcl/Makefile" ;;
  "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
  "lib/nn/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/nn/Makefile" ;;
  "lib/csa/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/csa/Makefile" ;;
  "pkgcfg/Makefile" ) CONFIG_FILES="$CONFIG_FILES pkgcfg/Makefile" ;;
  "pkgcfg/gen-pc-files.pl" ) CONFIG_FILES="$CONFIG_FILES pkgcfg/gen-pc-files.pl" ;;
  "bindings/gnome2/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/gnome2/Makefile" ;;
  "bindings/gnome2/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/gnome2/lib/Makefile" ;;
  "bindings/gnome2/python/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/gnome2/python/Makefile" ;;
  "bindings/tk/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/tk/Makefile" ;;
  "bindings/tk/pkgIndex.tcl" ) CONFIG_FILES="$CONFIG_FILES bindings/tk/pkgIndex.tcl" ;;
  "bindings/tk-x-plat/pkgIndex.tcl" ) CONFIG_FILES="$CONFIG_FILES bindings/tk-x-plat/pkgIndex.tcl" ;;
  "examples/tk/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/tk/Makefile" ;;
  "examples/tk/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/tk/Makefile.examples" ;;
  "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
  "test/plplot-test.sh" ) CONFIG_FILES="$CONFIG_FILES test/plplot-test.sh" ;;
  "test/test_c.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_c.sh" ;;
  "test/test_cxx.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_cxx.sh" ;;
  "test/test_f77.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_f77.sh" ;;
  "test/test_f95.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_f95.sh" ;;
  "test/test_octave.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_octave.sh" ;;
  "test/test_python.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_python.sh" ;;
  "test/test_java.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_java.sh" ;;
  "test/test_tcl.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_tcl.sh" ;;
  "test/test_perl.sh" ) CONFIG_FILES="$CONFIG_FILES test/test_perl.sh" ;;
  "doc/docbook/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/Makefile" ;;
  "doc/docbook/src/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/src/Makefile" ;;
  "doc/docbook/src/plplotdoc.xml" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/src/plplotdoc.xml" ;;
  "doc/docbook/src/plplotdoc-html.dsl" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/src/plplotdoc-html.dsl" ;;
  "doc/docbook/src/plplotdoc-print.dsl" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/src/plplotdoc-print.dsl" ;;
  "doc/docbook/bin/api2man.pl" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/bin/api2man.pl" ;;
  "doc/docbook/www/index.html.in" ) CONFIG_FILES="$CONFIG_FILES doc/docbook/www/index.html.in" ;;
  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
  "fonts/Makefile" ) CONFIG_FILES="$CONFIG_FILES fonts/Makefile" ;;
  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
  "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
  "data/Makefile" ) CONFIG_FILES="$CONFIG_FILES data/Makefile" ;;
  "bindings/Makefile" ) CONFIG_FILES="$CONFIG_FILES bindings/Makefile" ;;
  "cf/Makefile" ) CONFIG_FILES="$CONFIG_FILES cf/Makefile" ;;
  "drivers/Makefile" ) CONFIG_FILES="$CONFIG_FILES drivers/Makefile" ;;
  "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
  "examples/c/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/c/Makefile" ;;
  "examples/c/Makefile.examples" ) CONFIG_FILES="$CONFIG_FILES examples/c/Makefile.examples" ;;
  "examples/perl/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/perl/Makefile" ;;
  "utils/Makefile" ) CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;;
  "scripts/Makefile" ) CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;;
  "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
  "scripts/plplot-config" ) CONFIG_FILES="$CONFIG_FILES scripts/plplot-config" ;;
  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
  "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
  "default-2" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
  "default-3" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-3" ;;
  "default-4" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-4" ;;
  "default-5" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-5" ;;
  "default-6" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-6" ;;
  "default-7" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-7" ;;
  "default-8" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-8" ;;
  "default-9" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-9" ;;
  "default-10" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-10" ;;
  "default-11" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-11" ;;
  "default-12" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-12" ;;
  "default-13" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-13" ;;
  "default-14" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-14" ;;
  "default-15" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-15" ;;
  "default-16" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-16" ;;
  "default-17" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-17" ;;
  "default-18" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-18" ;;
  "default-19" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-19" ;;
  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
  "include/plConfig.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/plConfig.h" ;;
  "include/plDevs.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/plDevs.h" ;;
  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done

# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason to put it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}

# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./confstat$$-$RANDOM
  (umask 077 && mkdir $tmp)
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}


#
# CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then
  # Protect against being on the right side of a sed subst in config.status.
  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
s,@CONFTEST@,,;t t
s,@SHELL@,/bin/sh,;t t
s,@PATH_SEPARATOR@,:,;t t
s,@PACKAGE_NAME@,plplot,;t t
s,@PACKAGE_TARNAME@,plplot,;t t
s,@PACKAGE_VERSION@,5.6.1,;t t
s,@PACKAGE_STRING@,plplot 5.6.1,;t t
s,@PACKAGE_BUGREPORT@,plplot-devel@lists.sourceforge.net,;t t
s,@exec_prefix@,,;t t
s,@prefix@,,;t t
s,@program_transform_name@,s,x,x,,;t t
s,@bindir@,${exec_prefix}/bin,;t t
s,@sbindir@,${exec_prefix}/sbin,;t t
s,@libexecdir@,${exec_prefix}/libexec,;t t
s,@datadir@,${prefix}/share,;t t
s,@sysconfdir@,${prefix}/etc,;t t
s,@sharedstatedir@,${prefix}/com,;t t
s,@localstatedir@,${prefix}/var,;t t
s,@libdir@,${exec_prefix}/lib,;t t
s,@includedir@,${prefix}/include,;t t
s,@oldincludedir@,/usr/include,;t t
s,@infodir@,${prefix}/info,;t t
s,@mandir@,${prefix}/man,;t t
s,@build_alias@,i386-unknown-gnu,;t t
s,@host_alias@,i386-unknown-gnu,;t t
s,@target_alias@,i386-unknown-gnu,;t t
s,@DEFS@,-DHAVE_CONFIG_H,;t t
s,@ECHO_C@,,;t t
s,@ECHO_N@,-n,;t t
s,@ECHO_T@,,;t t
s,@LIBS@,-lm ,;t t
s,@RELEASE_DATE@,2006-05-29,;t t
s,@INSTALL_PROGRAM@,install  -s -o root -g wheel -m 555,;t t
s,@INSTALL_SCRIPT@,install  -o root -g wheel -m 555,;t t
s,@INSTALL_DATA@,install  -o root -g wheel -m 444,;t t
s,@CYGPATH_W@,echo,;t t
s,@PACKAGE@,plplot,;t t
s,@VERSION@,5.6.1,;t t
s,@ACLOCAL@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run aclocal-1.9,;t t
s,@AUTOCONF@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run autoconf,;t t
s,@AUTOMAKE@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run automake-1.9,;t t
s,@AUTOHEADER@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run autoheader,;t t
s,@MAKEINFO@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run makeinfo,;t t
s,@install_sh@,/mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/install-sh,;t t
s,@STRIP@,strip,;t t
s,@ac_ct_STRIP@,strip,;t t
s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
s,@mkdir_p@,mkdir -p --,;t t
s,@AWK@,gawk,;t t
s,@SET_MAKE@,,;t t
s,@am__leading_dot@,.,;t t
s,@AMTAR@,${SHELL} /mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/cf/missing --run tar,;t t
s,@am__tar@,${AMTAR} chof - "$$tardir",;t t
s,@am__untar@,${AMTAR} xf -,;t t
s,@SOVERSION@,11:0:2,;t t
s,@CPP_SOVERSION@,11:0:2,;t t
s,@F77_SOVERSION@,10:0:1,;t t
s,@F95_SOVERSION@,0:0:0,;t t
s,@CSIRO_SOVERSION@,0:1:0,;t t
s,@PLPLOTGNOME_SOVERSION@,0:0:0,;t t
s,@PLPLOT_TCL_VERSION@,5,;t t
s,@CC@,cc,;t t
s,@CFLAGS@,-fno-common -mieee-fp,;t t
s,@LDFLAGS@,-L/usr/local/lib,;t t
s,@CPPFLAGS@,,;t t
s,@ac_ct_CC@,,;t t
s,@EXEEXT@,,;t t
s,@OBJEXT@,,;t t
s,@DEPDIR@,.deps,;t t
s,@am__include@,include,;t t
s,@am__quote@,,;t t
s,@AMDEP_TRUE@,,;t t
s,@AMDEP_FALSE@,#,;t t
s,@AMDEPBACKSLASH@,\,;t t
s,@CCDEPMODE@,depmode=gcc3,;t t
s,@am__fastdepCC_TRUE@,,;t t
s,@am__fastdepCC_FALSE@,#,;t t
s,@cc_is_gcc_TRUE@,#,;t t
s,@cc_is_gcc_FALSE@,,;t t
s,@LIB_TAG@,d,;t t
s,@with_double_TRUE@,,;t t
s,@with_double_FALSE@,#,;t t
s,@RPATH@,-rpath $(libdir),;t t
s,@RPATHCMD@,-Wl,-rpath -Wl,/lib,;t t
s,@with_rpath_TRUE@,,;t t
s,@with_rpath_FALSE@,#,;t t
s,@DATA_DIR@,${datadir}/${PACKAGE}${VERSION},;t t
s,@LIB_DIR@,${libdir},;t t
s,@INCLUDE_DIR@,${prefix}/include/plplot,;t t
s,@TCL_DIR@,${datadir}/${PACKAGE}${VERSION}/tcl,;t t
s,@DRV_DIR@,${libdir}/plplot5.6.1/driversd,;t t
s,@DOC_DIR@,${datadir}/doc/plplot,;t t
s,@BUILD_DIR@,/mnt/gmirror/ports/math/plplot/work/plplot-5.6.1,;t t
s,@LIB_DIR_CMD@,-L/lib,;t t
s,@INCLUDE_DIR_CMD@,-I/include/plplot,;t t
s,@LIB_HARDDIR@,/lib,;t t
s,@DRV_HARDDIR@,/lib/plplot5.6.1/driversd,;t t
s,@found_kcc@,,;t t
s,@CXX@,c++,;t t
s,@CXXFLAGS@,-fno-common -mieee-fp,;t t
s,@ac_ct_CXX@,,;t t
s,@CXXDEPMODE@,depmode=gcc3,;t t
s,@am__fastdepCXX_TRUE@,,;t t
s,@am__fastdepCXX_FALSE@,#,;t t
s,@enable_cxx@,yes,;t t
s,@enable_cxx_TRUE@,,;t t
s,@enable_cxx_FALSE@,#,;t t
s,@F77@,gfortran42,;t t
s,@FFLAGS@,-O,;t t
s,@ac_ct_F77@,,;t t
s,@HAVE_F77PARSE_CL_TRUE@,C ,;t t
s,@HAVE_F77PARSE_CL_FALSE@,,;t t
s,@enable_f77@,yes,;t t
s,@enable_f77_TRUE@,,;t t
s,@enable_f77_FALSE@,#,;t t
s,@FC@,gfortran42,;t t
s,@FCFLAGS@,,;t t
s,@ac_ct_FC@,,;t t
s,@MODULESINCCMD@,,;t t
s,@enable_f95@,no,;t t
s,@enable_f95_TRUE@,#,;t t
s,@enable_f95_FALSE@,,;t t
s,@has_file_cmd@,yes,;t t
s,@subdirs@, libltdl,;t t
s,@INCLTDL@,-I${top_srcdir}/libltdl,;t t
s,@LIBLTDL@,${top_builddir}/libltdl/libltdlc.la,;t t
s,@build@,i386-unknown-gnu,;t t
s,@build_cpu@,i386,;t t
s,@build_vendor@,unknown,;t t
s,@build_os@,gnu,;t t
s,@host@,i386-unknown-gnu,;t t
s,@host_cpu@,i386,;t t
s,@host_vendor@,unknown,;t t
s,@host_os@,gnu,;t t
s,@EGREP@,grep -E,;t t
s,@LN_S@,ln -s,;t t
s,@ECHO@,echo,;t t
s,@AR@,ar,;t t
s,@ac_ct_AR@,ar,;t t
s,@RANLIB@,ranlib,;t t
s,@ac_ct_RANLIB@,ranlib,;t t
s,@DLLTOOL@,dlltool,;t t
s,@ac_ct_DLLTOOL@,,;t t
s,@AS@,as,;t t
s,@ac_ct_AS@,,;t t
s,@OBJDUMP@,objdump,;t t
s,@ac_ct_OBJDUMP@,,;t t
s,@CPP@,cc -E,;t t
s,@CXXCPP@,c++ -E,;t t
s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t
s,@with_ltdlsystem_TRUE@,#,;t t
s,@with_ltdlsystem_FALSE@,,;t t
s,@PYTHON@,/usr/local/bin/python,;t t
s,@PYTHON_VERSION@,2.3,;t t
s,@PYTHON_PREFIX@,${prefix},;t t
s,@PYTHON_EXEC_PREFIX@,${exec_prefix},;t t
s,@PYTHON_PLATFORM@,darwin,;t t
s,@pythondir@,${prefix}/lib/python2.3/site-packages,;t t
s,@pkgpythondir@,${pythondir}/plplot,;t t
s,@pyexecdir@,${exec_prefix}/lib/python2.3/site-packages,;t t
s,@pkgpyexecdir@,${pyexecdir}/plplot,;t t
s,@PYTHON_CPPFLAGS@,-I/usr/local/include/python2.3,;t t
s,@PYTHON_LDFLAGS@,-L/usr/local/lib/python2.3 -lpython2.3,;t t
s,@PYTHON_SITE_PKG@,/usr/local/lib/python2.3/site-packages,;t t
s,@PYTHON_EXTRA_LIBS@, -lxpg4 -ldl,;t t
s,@PYTHON_EXTRA_LDFLAGS@,-framework System,;t t
s,@PYTHON_INSTDIR@,/lib/python2.3/site-packages,;t t
s,@enable_python@,no,;t t
s,@PYTHONINCCMD@,,;t t
s,@NUMERICINCCMD@,,;t t
s,@enable_python_TRUE@,#,;t t
s,@enable_python_FALSE@,,;t t
s,@darwin_os_TRUE@,#,;t t
s,@darwin_os_FALSE@,,;t t
s,@JAVAC@,,;t t
s,@JAR@,,;t t
s,@JAVAINCCMD@,,;t t
s,@enable_java@,no,;t t
s,@JAVAWRAPPER_DIR@,,;t t
s,@JAVAWRAPPER_HARDDIR@,,;t t
s,@JAVADATA_HARDDIR@,,;t t
s,@PLPLOTJAVAC_WRAP_DLL@,,;t t
s,@enable_java_TRUE@,#,;t t
s,@enable_java_FALSE@,,;t t
s,@SWIG@,echo "Error: SWIG is not installed. You should look at http://www.swig.org" ; false,;t t
s,@SWIG_LIB@,,;t t
s,@has_matwrap@,,;t t
s,@has_mkoctfile@,,;t t
s,@has_octave@,,;t t
s,@OCTAVE@,,;t t
s,@MATWRAP@,,;t t
s,@MKOCTFILE@,,;t t
s,@OCTAVE_VERSION@,,;t t
s,@OCTAVE_OCT_DIR@,,;t t
s,@OCTAVE_M_DIR@,,;t t
s,@PLPLOT_OCTAVE_DIR@,,;t t
s,@enable_octave@,no,;t t
s,@enable_octave_TRUE@,#,;t t
s,@enable_octave_FALSE@,,;t t
s,@DEFINE_PL_DOUBLE@,#define PL_DOUBLE,;t t
s,@MKOCTFILE_VARS@,,;t t
s,@MKINDEX@,./scripts/mktclIndex -tcl,;t t
s,@ITCLINCCMD@,,;t t
s,@ITCLLIBCMD@,,;t t
s,@TCLINCCMD@,,;t t
s,@TCLLIBCMD@,-L/usr/local/lib -ltcl8.3,;t t
s,@enable_tcl@,yes,;t t
s,@DLNAME_LIBPLPLOT@,,;t t
s,@DLNAME_LIBPLPLOTD@,,;t t
s,@DLNAME_LIBPLPLOTTCLTK@,,;t t
s,@DLNAME_LIBPLPLOTTCLTKD@,,;t t
s,@enable_itcl_TRUE@,#,;t t
s,@enable_itcl_FALSE@,,;t t
s,@enable_tcl_TRUE@,,;t t
s,@enable_tcl_FALSE@,#,;t t
s,@PERL@,perl,;t t
s,@enable_pdl@,no,;t t
s,@enable_pdl_TRUE@,#,;t t
s,@enable_pdl_FALSE@,,;t t
s,@PTHREADLIBS@,,;t t
s,@FREETYPEINCCMD@, -I/usr/local/include/freetype2,;t t
s,@FREETYPELIBCMD@, -lfreetype,;t t
s,@UNICODE_CONFIG@,,;t t
s,@UNICODEINCS@,,;t t
s,@UNICODELIBS@,,;t t
s,@QHULLLIBS@,,;t t
s,@NNLIBS@,,;t t
s,@CSALIBS@,$(top_builddir)/lib/csa/libcsirocsa.la,;t t
s,@with_csa_TRUE@,,;t t
s,@with_csa_FALSE@,#,;t t
s,@with_qhull_TRUE@,#,;t t
s,@with_qhull_FALSE@,,;t t
s,@PKG_CONFIG_CHECK@,found,;t t
s,@pkg_config_true@,,;t t
s,@pkg_config_false@,# ,;t t
s,@PKG_CONFIG_DIR@,${prefix}/libdata/pkgconfig,;t t
s,@PKG_CONFIG_ENV@,PKG_CONFIG_PATH=/libdata/pkgconfig,;t t
s,@with_pkg_config_TRUE@,,;t t
s,@with_pkg_config_FALSE@,#,;t t
s,@STATIC_DRIVERS@,,;t t
s,@DYNAMIC_DRIVERS@,gd.la hpgl.la mem.la null.la pbm.la plmeta.la ps.la xfig.la xwin.la,;t t
s,@CDINCCMD@,,;t t
s,@CDLIBCMD@,,;t t
s,@PKG_CONFIG@,/usr/local/bin/pkg-config,;t t
s,@GCW_CFLAGS@,,;t t
s,@GCW_LIBS@,,;t t
s,@GCWTHREAD_CFLAGS@,,;t t
s,@GCWTHREAD_LIBS@,,;t t
s,@PYGCW_CFLAGS@,,;t t
s,@PYGCW_LIBS@,,;t t
s,@GNOME_PYTHON_CFLAGS@,,;t t
s,@GNOME_PYTHON_LIBS@,,;t t
s,@gcw_true@,# ,;t t
s,@gcw_false@,,;t t
s,@enable_gcw@,no,;t t
s,@enable_gcw_TRUE@,#,;t t
s,@enable_gcw_FALSE@,,;t t
s,@enable_pygcw_TRUE@,#,;t t
s,@enable_pygcw_FALSE@,,;t t
s,@GDINCCMD@,,;t t
s,@GDLIBCMD@, -lgd -lpng -ljpeg -lz,;t t
s,@GTK_CONFIG@,,;t t
s,@GNOME_LIBS@,,;t t
s,@GNOMEUI_LIBS@,,;t t
s,@GNOME_LIBDIR@,,;t t
s,@GNOME_INCLUDEDIR@,,;t t
s,@GNOME_CONFIG@,,;t t
s,@GNOME_APPLETS_LIBS@,,;t t
s,@GNOME_CAPPLET_LIBS@,,;t t
s,@GTK_CFLAGS@,,;t t
s,@GTK_LIBS@,,;t t
s,@GNOMELIBS@,,;t t
s,@enable_gnome_TRUE@,#,;t t
s,@enable_gnome_FALSE@,,;t t
s,@LINUXVGALIBS@,,;t t
s,@X_CFLAGS@,,;t t
s,@X_PRE_LIBS@,,;t t
s,@X_LIBS@,,;t t
s,@X_EXTRA_LIBS@,,;t t
s,@enable_xwin_TRUE@,,;t t
s,@enable_xwin_FALSE@,#,;t t
s,@ITKLIBCMD@,,;t t
s,@TKINCCMD@,,;t t
s,@TKLIBCMD@,,;t t
s,@enable_tk_TRUE@,#,;t t
s,@enable_tk_FALSE@,,;t t
s,@enable_tkwin_TRUE@,#,;t t
s,@enable_tkwin_FALSE@,,;t t
s,@PSTTF_CFLAGS@,,;t t
s,@PSTTF_LIBS@,,;t t
s,@GDI32INCCMD@,,;t t
s,@GDI32LIBCMD@,,;t t
s,@AQTINCCMD@,,;t t
s,@AQTLIBCMD@,,;t t
s,@WXWIDGETSINCCMD@,,;t t
s,@WXWIDGETSLIBCMD@,,;t t
s,@enable_dyndrivers_TRUE@,,;t t
s,@enable_dyndrivers_FALSE@,#,;t t
s,@DIRNAME@,dirname,;t t
s,@EXAMPLES_DIRECTORIES@,c c++ f77,;t t
s,@WWW_USER@,,;t t
s,@WWW_GROUP@,plplot,;t t
s,@WWW_HOST@,shell1.sourceforge.net,;t t
s,@WWW_DIR@,/home/groups/p/pl/plplot/htdocs/docbook-manual,;t t
s,@RSH@,ssh,;t t
s,@RCP@,scp,;t t
s,@PLPLOT_WEBSITE@,plplot.sf.net,;t t
s,@XML_DECL@,/usr/share/xml/declaration/xml.dcl,;t t
s,@JADELOG@,jadeout.log,;t t
s,@DSSSL_DTD_PUBID@,-//James Clark//DTD DSSSL Style Sheet//EN,;t t
s,@DB_SS_HTML_PUBID@,-//Norman Walsh//DOCUMENT DocBook HTML Stylesheet//EN,;t t
s,@DB_SS_PRINT_PUBID@,-//Norman Walsh//DOCUMENT DocBook Print Stylesheet//EN,;t t
s,@DOCBOOK_DTD_PUBID@,-//OASIS//DTD DocBook XML V4.2//EN,;t t
s,@SGML_CATALOGS@,,;t t
s,@HTML_EXT@,html,;t t
s,@DOCBOOK2X_INC@,-I/mnt/gmirror/ports/math/plplot/work/plplot-5.6.1/doc/docbook/perl,;t t
s,@TARGETS@,print html info man,;t t
s,@has_perl@,found,;t t
s,@has_onsgmls@,found,;t t
s,@ONSGMLS@,onsgmls,;t t
s,@ifGNUmake@,,;t t
s,@has_db2x_texixml@,,;t t
s,@DB2X_TEXIXML@,,;t t
s,@has_db2x_xsltproc@,,;t t
s,@DB2X_XSLTPROC@,,;t t
s,@has_openjade@,,;t t
s,@OPENJADE@,,;t t
s,@has_jadetex@,,;t t
s,@JADETEX@,,;t t
s,@has_pdfjadetex@,,;t t
s,@PDFJADETEX@,,;t t
s,@has_dvips@,,;t t
s,@DVIPS@,,;t t
s,@has_makeinfo@,,;t t
s,@BASE@,plplot-5.6.1,;t t
s,@HTML_MANIFEST@,HTML-MANIFEST,;t t
s,@BASE_HTML@,plplot-html-5.6.1,;t t
s,@INFO_MANIFEST@,INFO-MANIFEST,;t t
s,@BASE_INFO@,plplot-info-5.6.1,;t t
s,@MAN_MANIFEST@,MAN-MANIFEST,;t t
s,@BASE_MAN@,plplot-man-5.6.1,;t t
s,@MANVOL@,3plplot,;t t
s,@docbook_build_TRUE@,,;t t
s,@docbook_build_FALSE@,#,;t t
s,@enable_docbook_TRUE@,#,;t t
s,@enable_docbook_FALSE@,,;t t
s,@has_onsgmls_TRUE@,,;t t
s,@has_onsgmls_FALSE@,#,;t t
s,@has_xml_pm_TRUE@,#,;t t
s,@has_xml_pm_FALSE@,,;t t
s,@LIBOBJS@,,;t t
s,@LTLIBOBJS@,,;t t
CEOF

  # Split the substitutions into bite-sized pieces for seds with
  # small command number limits, like on Digital OSF/1 and HP-UX.
  ac_max_sed_lines=48
  ac_sed_frag=1 # Number of current file.
  ac_beg=1 # First line for current file.
  ac_end=$ac_max_sed_lines # Line after last line for current file.
  ac_more_lines=:
  ac_sed_cmds=
  while $ac_more_lines; do
    if test $ac_beg -gt 1; then
      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    else
      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    fi
    if test ! -s $tmp/subs.frag; then
      ac_more_lines=false
    else
      # The purpose of the label and of the branching condition is to
      # speed up the sed processing (if there are no `@' at all, there
      # is no need to browse any of the substitutions).
      # These are the two extra sed commands mentioned above.
      (echo ':t
  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
      if test -z "$ac_sed_cmds"; then
	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
      else
	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
      fi
      ac_sed_frag=`expr $ac_sed_frag + 1`
      ac_beg=$ac_end
      ac_end=`expr $ac_end + $ac_max_sed_lines`
    fi
  done
  if test -z "$ac_sed_cmds"; then
    ac_sed_cmds=cat
  fi
fi # test -n "$CONFIG_FILES"

for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
	cat >$tmp/stdin
	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
  esac

  if test x"$ac_file" != x-; then
    { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    rm -f "$ac_file"
  fi
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    configure_input=
  else
    configure_input="$ac_file.  "
  fi
  configure_input=$configure_input"Generated from `echo $ac_file_in |
				     sed 's,.*/,,'` by configure."

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
  sed "/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[	 ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[	 ]*$//;
}

:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
  rm -f $tmp/stdin
  if test x"$ac_file" != x-; then
    mv $tmp/out $ac_file
  else
    cat $tmp/out
    rm -f $tmp/out
  fi

  # Run the commands associated with the file.
  case $ac_file in
    test/plplot-test.sh ) chmod +x test/plplot-test.sh ;;
    test/test_c.sh ) chmod +x test/test_c.sh ;;
    test/test_cxx.sh ) chmod +x test/test_cxx.sh ;;
    test/test_f77.sh ) chmod +x test/test_f77.sh ;;
    test/test_f95.sh ) chmod +x test/test_f95.sh ;;
    test/test_octave.sh ) chmod +x test/test_octave.sh ;;
    test/test_python.sh ) chmod +x test/test_python.sh ;;
    test/test_java.sh ) chmod +x test/test_java.sh ;;
    test/test_tcl.sh ) chmod +x test/test_tcl.sh ;;
    test/test_perl.sh ) chmod +x test/test_perl.sh ;;
  esac
done

#
# CONFIG_HEADER section.
#

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
ac_dB='[	 ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'

for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
	cat >$tmp/stdin
	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 # Do quote $f, to prevent DOS paths from being IFS'd.
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
  # Remove the trailing spaces.
  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in

  # Handle all the #define templates only if necessary.
  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then
  # If there are no defines, we may have an empty if/fi
  :
  cat >$tmp/defines.sed <<CEOF
/^[	 ]*#[	 ]*define/!b
t clr
: clr
${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}"plplot"${ac_dD}
${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}"plplot"${ac_dD}
${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}"5.6.1"${ac_dD}
${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}"plplot 5.6.1"${ac_dD}
${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}"plplot-devel@lists.sourceforge.net"${ac_dD}
${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"plplot"${ac_dD}
${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"5.6.1"${ac_dD}
${ac_dA}PL_DOUBLE${ac_dB}PL_DOUBLE${ac_dC}${ac_dD}
${ac_dA}DATA_DIR${ac_dB}DATA_DIR${ac_dC}"/share/plplot5.6.1"${ac_dD}
${ac_dA}DRV_DIR${ac_dB}DRV_DIR${ac_dC}"/lib/plplot5.6.1/driversd"${ac_dD}
${ac_dA}BIN_DIR${ac_dB}BIN_DIR${ac_dC}"/bin"${ac_dD}
${ac_dA}TCL_DIR${ac_dB}TCL_DIR${ac_dC}"/share/plplot5.6.1/tcl"${ac_dD}
${ac_dA}BUILD_DIR${ac_dB}BUILD_DIR${ac_dC}"/mnt/gmirror/ports/math/plplot/work/plplot-5.6.1"${ac_dD}
${ac_dA}HAVE_DLFCN_H${ac_dB}HAVE_DLFCN_H${ac_dC}1${ac_dD}
${ac_dA}HAVE_LIBM${ac_dB}HAVE_LIBM${ac_dC}1${ac_dD}
${ac_dA}WITH_CSA${ac_dB}WITH_CSA${ac_dC}${ac_dD}
${ac_dA}HAVE_TERMIOS_H${ac_dB}HAVE_TERMIOS_H${ac_dC}1${ac_dD}
${ac_dA}HAVE_SYS_WAIT_H${ac_dB}HAVE_SYS_WAIT_H${ac_dC}1${ac_dD}
${ac_dA}HAVE_DIRENT_H${ac_dB}HAVE_DIRENT_H${ac_dC}1${ac_dD}
${ac_dA}caddr_t${ac_dB}caddr_t${ac_dC}char *${ac_dD}
${ac_dA}RETSIGTYPE${ac_dB}RETSIGTYPE${ac_dC}int${ac_dD}
${ac_dA}pid_t${ac_dB}pid_t${ac_dC}int${ac_dD}
${ac_dA}HAVE_FORK${ac_dB}HAVE_FORK${ac_dC}1${ac_dD}
${ac_dA}HAVE_VFORK${ac_dB}HAVE_VFORK${ac_dC}1${ac_dD}
${ac_dA}HAVE_WORKING_VFORK${ac_dB}HAVE_WORKING_VFORK${ac_dC}1${ac_dD}
${ac_dA}HAVE_WORKING_FORK${ac_dB}HAVE_WORKING_FORK${ac_dC}1${ac_dD}
${ac_dA}HAVE_POPEN${ac_dB}HAVE_POPEN${ac_dC}${ac_dD}
${ac_dA}HAVE_USLEEP${ac_dB}HAVE_USLEEP${ac_dC}${ac_dD}
${ac_dA}HAVE_ISINF${ac_dB}HAVE_ISINF${ac_dC}${ac_dD}
${ac_dA}HAVE_FINITE${ac_dB}HAVE_FINITE${ac_dC}${ac_dD}
${ac_dA}HAVE_ISNAN${ac_dB}HAVE_ISNAN${ac_dC}${ac_dD}
${ac_dA}ENABLE_DYNDRIVERS${ac_dB}ENABLE_DYNDRIVERS${ac_dC}${ac_dD}
${ac_dA}PLD_png${ac_dB}PLD_png${ac_dC}${ac_dD}
${ac_dA}PLD_jpeg${ac_dB}PLD_jpeg${ac_dC}${ac_dD}
${ac_dA}PLD_gif${ac_dB}PLD_gif${ac_dC}${ac_dD}
${ac_dA}PLD_hp7470${ac_dB}PLD_hp7470${ac_dC}${ac_dD}
${ac_dA}PLD_hp7580${ac_dB}PLD_hp7580${ac_dC}${ac_dD}
${ac_dA}PLD_lj_hpgl${ac_dB}PLD_lj_hpgl${ac_dC}${ac_dD}
CEOF
  sed -f $tmp/defines.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in

  cat >$tmp/defines.sed <<CEOF
/^[	 ]*#[	 ]*define/!b
t clr
: clr
${ac_dA}PLD_mem${ac_dB}PLD_mem${ac_dC}${ac_dD}
${ac_dA}PLD_null${ac_dB}PLD_null${ac_dC}${ac_dD}
${ac_dA}PLD_pbm${ac_dB}PLD_pbm${ac_dC}${ac_dD}
${ac_dA}PLD_plmeta${ac_dB}PLD_plmeta${ac_dC}${ac_dD}
${ac_dA}PLD_ps${ac_dB}PLD_ps${ac_dC}${ac_dD}
${ac_dA}PLD_xfig${ac_dB}PLD_xfig${ac_dC}${ac_dD}
${ac_dA}PLD_xwin${ac_dB}PLD_xwin${ac_dC}${ac_dD}
CEOF
  sed -f $tmp/defines.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in

  fi # grep

  # Handle all the #undef templates
  cat >$tmp/undefs.sed <<CEOF
/^[	 ]*#[	 ]*undef/!b
t clr
: clr
${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}"plplot"${ac_uD}
${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}"plplot"${ac_uD}
${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}"5.6.1"${ac_uD}
${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}"plplot 5.6.1"${ac_uD}
${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}"plplot-devel@lists.sourceforge.net"${ac_uD}
${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"plplot"${ac_uD}
${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"5.6.1"${ac_uD}
${ac_uA}PL_DOUBLE${ac_uB}PL_DOUBLE${ac_uC}${ac_uD}
${ac_uA}DATA_DIR${ac_uB}DATA_DIR${ac_uC}"/share/plplot5.6.1"${ac_uD}
${ac_uA}DRV_DIR${ac_uB}DRV_DIR${ac_uC}"/lib/plplot5.6.1/driversd"${ac_uD}
${ac_uA}BIN_DIR${ac_uB}BIN_DIR${ac_uC}"/bin"${ac_uD}
${ac_uA}TCL_DIR${ac_uB}TCL_DIR${ac_uC}"/share/plplot5.6.1/tcl"${ac_uD}
${ac_uA}BUILD_DIR${ac_uB}BUILD_DIR${ac_uC}"/mnt/gmirror/ports/math/plplot/work/plplot-5.6.1"${ac_uD}
${ac_uA}HAVE_DLFCN_H${ac_uB}HAVE_DLFCN_H${ac_uC}1${ac_uD}
${ac_uA}HAVE_LIBM${ac_uB}HAVE_LIBM${ac_uC}1${ac_uD}
${ac_uA}WITH_CSA${ac_uB}WITH_CSA${ac_uC}${ac_uD}
${ac_uA}HAVE_TERMIOS_H${ac_uB}HAVE_TERMIOS_H${ac_uC}1${ac_uD}
${ac_uA}HAVE_SYS_WAIT_H${ac_uB}HAVE_SYS_WAIT_H${ac_uC}1${ac_uD}
${ac_uA}HAVE_DIRENT_H${ac_uB}HAVE_DIRENT_H${ac_uC}1${ac_uD}
${ac_uA}caddr_t${ac_uB}caddr_t${ac_uC}char *${ac_uD}
${ac_uA}RETSIGTYPE${ac_uB}RETSIGTYPE${ac_uC}int${ac_uD}
${ac_uA}pid_t${ac_uB}pid_t${ac_uC}int${ac_uD}
${ac_uA}HAVE_FORK${ac_uB}HAVE_FORK${ac_uC}1${ac_uD}
${ac_uA}HAVE_VFORK${ac_uB}HAVE_VFORK${ac_uC}1${ac_uD}
${ac_uA}HAVE_WORKING_VFORK${ac_uB}HAVE_WORKING_VFORK${ac_uC}1${ac_uD}
${ac_uA}HAVE_WORKING_FORK${ac_uB}HAVE_WORKING_FORK${ac_uC}1${ac_uD}
${ac_uA}HAVE_POPEN${ac_uB}HAVE_POPEN${ac_uC}${ac_uD}
${ac_uA}HAVE_USLEEP${ac_uB}HAVE_USLEEP${ac_uC}${ac_uD}
${ac_uA}HAVE_ISINF${ac_uB}HAVE_ISINF${ac_uC}${ac_uD}
${ac_uA}HAVE_FINITE${ac_uB}HAVE_FINITE${ac_uC}${ac_uD}
${ac_uA}HAVE_ISNAN${ac_uB}HAVE_ISNAN${ac_uC}${ac_uD}
${ac_uA}ENABLE_DYNDRIVERS${ac_uB}ENABLE_DYNDRIVERS${ac_uC}${ac_uD}
${ac_uA}PLD_png${ac_uB}PLD_png${ac_uC}${ac_uD}
${ac_uA}PLD_jpeg${ac_uB}PLD_jpeg${ac_uC}${ac_uD}
${ac_uA}PLD_gif${ac_uB}PLD_gif${ac_uC}${ac_uD}
${ac_uA}PLD_hp7470${ac_uB}PLD_hp7470${ac_uC}${ac_uD}
${ac_uA}PLD_hp7580${ac_uB}PLD_hp7580${ac_uC}${ac_uD}
${ac_uA}PLD_lj_hpgl${ac_uB}PLD_lj_hpgl${ac_uC}${ac_uD}
CEOF
  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in

  cat >$tmp/undefs.sed <<CEOF
/^[	 ]*#[	 ]*undef/!b
t clr
: clr
${ac_uA}PLD_mem${ac_uB}PLD_mem${ac_uC}${ac_uD}
${ac_uA}PLD_null${ac_uB}PLD_null${ac_uC}${ac_uD}
${ac_uA}PLD_pbm${ac_uB}PLD_pbm${ac_uC}${ac_uD}
${ac_uA}PLD_plmeta${ac_uB}PLD_plmeta${ac_uC}${ac_uD}
${ac_uA}PLD_ps${ac_uB}PLD_ps${ac_uC}${ac_uD}
${ac_uA}PLD_xfig${ac_uB}PLD_xfig${ac_uC}${ac_uD}
${ac_uA}PLD_xwin${ac_uB}PLD_xwin${ac_uC}${ac_uD}
s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
CEOF
  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in

  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    echo "/* Generated by configure.  */" >$tmp/config.h
  else
    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
  fi
  cat $tmp/in >>$tmp/config.h
  rm -f $tmp/in
  if test x"$ac_file" != x-; then
    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
      { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

      rm -f $ac_file
      mv $tmp/config.h $ac_file
    fi
  else
    cat $tmp/config.h
    rm -f $tmp/config.h
  fi
# Compute $ac_file's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $ac_file | $ac_file:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X$ac_file : 'X\(//\)[^/]' \| \
	 X$ac_file : 'X\(//\)$' \| \
	 X$ac_file : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X$ac_file |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`/stamp-h$_am_stamp_count
done

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_dest" : 'X\(//\)[^/]' \| \
	 X"$ac_dest" : 'X\(//\)$' \| \
	 X"$ac_dest" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
  case $ac_dest in
    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # So let's grep whole file.
  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
    dirpart=`(dirname "$mf") 2>/dev/null ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$mf" : 'X\(//\)[^/]' \| \
	 X"$mf" : 'X\(//\)$' \| \
	 X"$mf" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`(dirname "$file") 2>/dev/null ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$file" : 'X\(//\)[^/]' \| \
	 X"$file" : 'X\(//\)$' \| \
	 X"$file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    { if $as_mkdir_p; then
    mkdir -p $dirpart/$fdir
  else
    as_dir=$dirpart/$fdir
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
   { (exit 1); exit 1; }; }; }

    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
 ;;
    default-1 )
if test $has_perl = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program perl not found.
    Install the perl program in your path or specify its
    location with the option --with-perl.
    The perl package can be found at
    http://www.perl.com." >&5
echo "$as_me: WARNING:
Program perl not found.
    Install the perl program in your path or specify its
    location with the option --with-perl.
    The perl package can be found at
    http://www.perl.com." >&2;}
fi ;;
    default-2 )
if test $pldb_cv_xml_sax = no ; then
  { echo "$as_me:$LINENO: WARNING:
Could not find Perl module XML::SAX::Expat.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&5
echo "$as_me: WARNING:
Could not find Perl module XML::SAX::Expat.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&2;}
fi ;;
    default-3 )
if test $pldb_cv_xml_parser = no ; then
  { echo "$as_me:$LINENO: WARNING:
Could not find Perl module XML::Parser.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&5
echo "$as_me: WARNING:
Could not find Perl module XML::Parser.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&2;}
fi ;;
    default-4 )
if test $pldb_cv_xml_dom = no ; then
  { echo "$as_me:$LINENO: WARNING:
Could not find Perl module XML::DOM.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&5
echo "$as_me: WARNING:
Could not find Perl module XML::DOM.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&2;}
fi ;;
    default-5 )
if test $has_onsgmls = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program onsgmls not found.
    Install the onsgmls program in your path or specify its
    location with the option --with-onsgmls.
    The onsgmls package can be found at
    http://www.openjade.org." >&5
echo "$as_me: WARNING:
Program onsgmls not found.
    Install the onsgmls program in your path or specify its
    location with the option --with-onsgmls.
    The onsgmls package can be found at
    http://www.openjade.org." >&2;}
fi ;;
    default-6 )
if test $has_db2x_texixml = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program db2x_texixml not found.
    Install the db2x_texixml program in your path or specify its
    location with the option --with-db2x_texixml.
    The db2x_texixml package can be found at
    http://docbook2x.sourceforge.net." >&5
echo "$as_me: WARNING:
Program db2x_texixml not found.
    Install the db2x_texixml program in your path or specify its
    location with the option --with-db2x_texixml.
    The db2x_texixml package can be found at
    http://docbook2x.sourceforge.net." >&2;}
fi ;;
    default-7 )
if test $has_db2x_xsltproc = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program db2x_xsltproc not found.
    Install the db2x_xsltproc program in your path or specify its
    location with the option --with-db2x_xsltproc.
    The db2x_xsltproc package can be found at
    http://docbook2x.sourceforge.net." >&5
echo "$as_me: WARNING:
Program db2x_xsltproc not found.
    Install the db2x_xsltproc program in your path or specify its
    location with the option --with-db2x_xsltproc.
    The db2x_xsltproc package can be found at
    http://docbook2x.sourceforge.net." >&2;}
fi ;;
    default-8 )
if test $has_openjade = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program openjade not found.
    Install the openjade program in your path or specify its
    location with the option --with-openjade.
    The openjade package can be found at
    http://www.openjade.org." >&5
echo "$as_me: WARNING:
Program openjade not found.
    Install the openjade program in your path or specify its
    location with the option --with-openjade.
    The openjade package can be found at
    http://www.openjade.org." >&2;}
fi ;;
    default-9 )
if test $has_jadetex = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program jadetex not found.
    Install the jadetex program in your path or specify its
    location with the option --with-jadetex.
    The jadetex package can be found at
    http://jadetex.sourceforge.net/." >&5
echo "$as_me: WARNING:
Program jadetex not found.
    Install the jadetex program in your path or specify its
    location with the option --with-jadetex.
    The jadetex package can be found at
    http://jadetex.sourceforge.net/." >&2;}
fi ;;
    default-10 )
if test $has_pdfjadetex = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program pdfjadetex not found.
    Install the pdfjadetex program in your path or specify its
    location with the option --with-pdfjadetex.
    The pdfjadetex package can be found at
    http://jadetex.sourceforge.net/." >&5
echo "$as_me: WARNING:
Program pdfjadetex not found.
    Install the pdfjadetex program in your path or specify its
    location with the option --with-pdfjadetex.
    The pdfjadetex package can be found at
    http://jadetex.sourceforge.net/." >&2;}
fi ;;
    default-11 )
if test $has_dvips = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program dvips not found.
    Install the dvips program in your path or specify its
    location with the option --with-dvips.
    The dvips package can be found at
    http://www.ctan.org." >&5
echo "$as_me: WARNING:
Program dvips not found.
    Install the dvips program in your path or specify its
    location with the option --with-dvips.
    The dvips package can be found at
    http://www.ctan.org." >&2;}
fi ;;
    default-12 )
if test $has_makeinfo = no ; then
{ echo "$as_me:$LINENO: WARNING:
Program makeinfo not found.
    Install the makeinfo program in your path or specify its
    location with the option --with-makeinfo.
    The makeinfo package can be found at
    http://www.gnu.org." >&5
echo "$as_me: WARNING:
Program makeinfo not found.
    Install the makeinfo program in your path or specify its
    location with the option --with-makeinfo.
    The makeinfo package can be found at
    http://www.gnu.org." >&2;}
fi ;;
    default-13 )
if test $pldb_cv_dsssl_dtd = no ; then
  { echo "$as_me:$LINENO: WARNING: Could not find DSSSL Style Sheet DTD.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_dsssl_dtd
    Its system identifier, i.e. a file usually called
        \"style-sheet.dtd\"
    is distributed with the jade package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&5
echo "$as_me: WARNING: Could not find DSSSL Style Sheet DTD.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_dsssl_dtd
    Its system identifier, i.e. a file usually called
        \"style-sheet.dtd\"
    is distributed with the jade package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&2;}
fi
 ;;
    default-14 )
if test $pldb_cv_html_ss = no ; then
  { echo "$as_me:$LINENO: WARNING: Could not find DocBook HTML Stylesheet.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_html_ss
    Its system identifier, i.e. a file usually called
        \"html/docbook.dsl\"
    is distributed with the docbook-stylesheets package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&5
echo "$as_me: WARNING: Could not find DocBook HTML Stylesheet.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_html_ss
    Its system identifier, i.e. a file usually called
        \"html/docbook.dsl\"
    is distributed with the docbook-stylesheets package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&2;}
fi
 ;;
    default-15 )
if test $pldb_cv_print_ss = no ; then
  { echo "$as_me:$LINENO: WARNING: Could not find DocBook Print Stylesheet.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_print_ss
    Its system identifier, i.e. a file usually called
        \"print/docbook.dsl\"
    is distributed with the docbook-stylesheets package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&5
echo "$as_me: WARNING: Could not find DocBook Print Stylesheet.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_print_ss
    Its system identifier, i.e. a file usually called
        \"print/docbook.dsl\"
    is distributed with the docbook-stylesheets package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&2;}
fi
 ;;
    default-16 )
if test $pldb_cv_db_dtd = no ; then
  { echo "$as_me:$LINENO: WARNING: Could not find DocBook DTD.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_db_dtd
    Its system identifier, i.e. a file usually called
        \"docbookx.dtd\"
    is distributed with the docbook-xml (DTD version 3.1.3) package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&5
echo "$as_me: WARNING: Could not find DocBook DTD.
    The following SGML public identifier could not be found in any of
    the default SGML catalogs:
        $dtd_db_dtd
    Its system identifier, i.e. a file usually called
        \"docbookx.dtd\"
    is distributed with the docbook-xml (DTD version 3.1.3) package.  Install it in your
    system and put the correct entry in the catalog file.
    You might also use the configure option --with-sgml-catalog to specify
    alternative SGML catalogs." >&2;}
fi
 ;;
    default-17 )
if test $pldb_cv_xml_parser_perlsax = no ; then
  { echo "$as_me:$LINENO: WARNING:
Could not find Perl module XML::Parser::PerlSAX.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&5
echo "$as_me: WARNING:
Could not find Perl module XML::Parser::PerlSAX.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&2;}
fi ;;
    default-18 )
if test $pldb_cv_xml_writer = no ; then
  { echo "$as_me:$LINENO: WARNING:
Could not find Perl module XML::Writer.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&5
echo "$as_me: WARNING:
Could not find Perl module XML::Writer.
    Install it in your system at a place where Perl can find
    it (through @INC)." >&2;}
fi ;;
    default-19 )
if test "$print" = "" ; then
  echo
  echo '  ******************************************************************'
  echo '  * Due to some lacking dependencies (see warning messages above), *'
  echo '  * it will not be possible to build a printed version of the      *'
  echo '  * documentation.                                                 *'
  echo '  ******************************************************************'
fi
if test "$html" = "" ; then
  echo
  echo '  ******************************************************************'
  echo '  * Due to some lacking dependencies (see warning messages above), *'
  echo '  * it will not be possible to build a HTML version of the         *'
  echo '  * documentation.                                                 *'
  echo '  ******************************************************************'
fi
if test "$info" = "" ; then
  echo
  echo '  ******************************************************************'
  echo '  * Due to some lacking dependencies (see warning messages above), *'
  echo '  * it will not be possible to build an info version of the        *'
  echo '  * documentation.                                                 *'
  echo '  ******************************************************************'
fi
if test "$man" = "" ; then
  echo
  echo '  ******************************************************************'
  echo '  * Due to some lacking dependencies (see warning messages above), *'
  echo '  * it will not be possible to build the man pages of the API      *'
  echo '  * chapter.                                                       *'
  echo '  ******************************************************************'
fi ;;
  esac
done

{ (exit 0); exit 0; }