# Generated automatically from Makefile.in by configure.
###############################################################################
#
# Mpexpr-1.0
# Makefile.in for Mpexpr configure
#
# Copyright 1998 Tom Poindexter 

MPEXPR_VERSION = 1.0
MPEXPR_LIBVER  = 10

SRC_DIR = /mnt/gmirror/ports/math/mpexpr/work/mpexpr-1.1/unix
vpath % $(SRC_DIR)/../generic

SHELL = /bin/sh

###############################################################################
#
# set the following defines as needed: 

prefix       = /usr/local
exec_prefix  = /usr/local

# alternative defs
#prefix      = /usr/local
#exec_prefix = /usr/local

#------------------------------------------------------------------------------
# define where Mpexpr should put binaries, libraries, and mapages
#

BIN_DIR      = $(exec_prefix)/bin
LIB_DIR      = $(exec_prefix)/lib
MAN_DIR      = $(prefix)/man
MANN_DIR     = $(MAN_DIR)/mann

#------------------------------------------------------------------------------
# define where Tcl include and libraries are located
# Mpexpr assumes that Tcl, Tk (and possibly Extended Tcl) are installed
# in the same locations

TCL_INC_DIR  = /usr/local/include/tcl8.4
TCL_LIB_DIR  = /usr/local/lib

#------------------------------------------------------------------------------
# Pull in debugging flag

TCL_DBGX      = 
TK_DBGX       = 

#------------------------------------------------------------------------------
# define Tcl, Tk, TclX libraries and extra libs

TCL_VERSION   = 8.4
TK_VERSION    = 

TCL_LIB_SPEC  = -L/usr/local/lib -ltcl8.4${TCL_DBGX}
TCL_LIBS      =   -framework CoreFoundation 

TK_LIB_SPEC   = 
TK_LIBS       = 
TK_XINCLUDES  = 
TK_XLIBSW     = 

TCLX_LIB_SPEC = 
TCLX_LIBS     = 
TCLX_LIB_LOC  = 
TCLX_LIB_SEP  = /
TKX_LIB_SPEC  = 
TKX_LIBS      = 

# grab the versions from TclX, needed to find TclX appinit files
TCLX_FULL_VERSION = 
TKX_FULL_VERSION  = 

#------------------------------------------------------------------------------
# compiler and flags from tcl config, so don't change CC
# without some thought, otherwise you might break the shared flags.
 
CC                = cc
#CC                = purify -cache-dir=pure_cache -chain-length="13" cc 

OPT_FLAG          = -O
#OPT_FLAG          = -g

TCL_DEFS          = $(OPT_FLAG)  -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_COREFOUNDATION=1 -DMAC_OSX_TCL=1 -DTCL_WIDE_INT_TYPE=long\ long -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 -DHAVE_STRSTR=1 -DHAVE_STRTOL=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_TM_ZONE=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 -DHAVE_ST_BLKSIZE=1 -DSTDC_HEADERS=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_PUTENV_THAT_COPIES=1 -DHAVE_LANGINFO=1 -DHAVE_COPYFILE_H=1 -DHAVE_COPYFILE=1 -DHAVE_LIBKERN_OSATOMIC_H=1 -DHAVE_OSSPINLOCKLOCK=1 -DHAVE_PTHREAD_ATFORK=1 -DUSE_VFORK=1 -DTCL_DEFAULT_ENCODING=\"utf-8\" -DTCL_LOAD_FROM_MEMORY=1 -DHAVE_AVAILABILITYMACROS_H=1 -DHAVE_FTS=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_FILIO_H=1     
TCL_LD_FLAGS      =  -prebind -headerpad_max_install_names -Wl,-search_paths_first
TCL_SHLIB_SUFFIX  = .dylib
TCL_SHLIB_CFLAGS  = -fno-common
TCL_SHLIB_LD      = ${CC} -dynamiclib ${CFLAGS} ${LDFLAGS} -Wl,-single_module
TCL_SHLIB_LD_LIBS = ${LIBS}

#------------------------------------------------------------------------------
# define names for Mpexpr tclsh/tcl executable

TCL_EXEC   = tclsh8.4
TCLX_EXEC  = tcl

#------------------------------------------------------------------------------
# define name for Mpexpr wish/wishx executable

WISH_EXEC  = wish8.4
WISHX_EXEC = wishx

#------------------------------------------------------------------------------
# define names for Mpexpr library files, static and shared

LIB_MPEXPR    = libMpexpr$(MPEXPR_LIBVER).a
LNK_MPEXPR    = -lMpexpr$(MPEXPR_LIBVER)
LIB_SH_MPEXPR = libMpexpr$(MPEXPR_LIBVER)$(TCL_SHLIB_SUFFIX)


#------------------------------------------------------------------------------
# object files

MPEXPR_OBJ =  	mpiface.o	\
		mpexpr.o	\
		mpparse.o	\
		mpformat.o	\
		qfunc.o		\
		qio.o		\
		qmath.o		\
		qmod.o		\
		qtrans.o	\
		zfunc.o		\
		zio.o		\
		zmath.o		\
		zmod.o		\
		zmul.o		

MPEXPR_SH_OBJ =	shared/mpiface.o	\
		shared/mpexpr.o		\
		shared/mpparse.o	\
		shared/mpformat.o	\
		shared/qfunc.o		\
		shared/qio.o		\
		shared/qmath.o		\
		shared/qmod.o		\
		shared/qtrans.o		\
		shared/zfunc.o		\
		shared/zio.o		\
		shared/zmath.o		\
		shared/zmod.o		\
		shared/zmul.o		

#------------------------------------------------------------------------------
# OTHER_LD_SEARCH_FLAGS so that dynamic loader will look for other libraries
# NOTE: these are hacked from TCL_LD_SEARCH_FLAGS, and may need tweaking
# for a particular platform.  LIB_INSTALL_DIR used in tcl7.5,
# LIB_RUNTIME_DIR used in tcl7.5p1+.  If your linker doesn't like a colon
# separated path, then you will have to figure out what works, or 
# possible leave off the second lib. The inclusion of the Tcl lib dir is
# for the occasion you are building a static lib, but a shared Tcl lib is
# found during linking.

LIB_INSTALL_DIR        = /usr/local/lib/tcl8.4
LIB_RUNTIME_DIR        = /usr/local/lib/tcl8.4
OTHER_LD_SEARCH_FLAGS  = 

# Include tcl's cc flags for dynamic lib search path.  This is in case you
# are builing a static binary for Mpexpr, but have both static and dynamic
# tcl libraries, of which the loader will probably prefer the dynamic verisons.
# Without this flag, the resulting binary won't have lib search information.
# Note that TCL_LD_SEARCH_FLAGS only works when LIB_RUNTIME_DIR has been set
# as above.
 
TCL_LD_SEARCH_FLAGS    = 
 

#------------------------------------------------------------------------------
# define man page 

MAN_PAGE = mpexpr.n


#------------------------------------------------------------------------------
# define ranlib command for systems that need it; touch otherwise

RANLIB = :

#------------------------------------------------------------------------------
# how to install

INSTALL         = /usr/bin/install -c -o root -g wheel
INSTALL_PROGRAM = install  -s -o root -g wheel -m 555
INSTALL_DATA    = install  -o root -g wheel -m 444


#
# end of defines
#
###############################################################################


T_EXEC = ${TCL_EXEC}
W_EXEC = 

all:	libMpexpr10.dylib  


#------------------------------------------------------------------------------
# helper programs - determine endian and longbits

# (the following was taken from David Bell's Makefile for 'calc' - tp)
# Copyright (c) 1994 David I. Bell and Landon Curt Noll
# Permission is granted to use, distribute, or modify this source,
# provided that this copyright notice remains intact.

#
# Determine the byte order of your machine
#
#    Big Endian:        Amdahl, 68k, Pyramid, Mips, Sparc, ...
#    Little Endian:     Vax, 32k, Spim (Dec Mips), i386, i486, ...
#
# If in doubt, leave BYTE_ORDER empty.  This makefile will attempt to
# use BYTE_ORDER in <machine/endian.h> or it will attempt to run
# the endian program.  If you get syntax errors when you compile,
# try forcing the value to be BIG_ENDIAN and run the calc regression
# tests. (see the README file)  If the calc regression tests fail, do
# a make clobber and try LITTLE_ENDIAN.  If that fails, ask a wizard
# for help.
#
#BYTE_ORDER=
#BYTE_ORDER= BIG_ENDIAN
BYTE_ORDER= LITTLE_ENDIAN

# Determine the number of bits in a long
#
# If in doubt, leave LONG_BITS empty.  This makefile will run
# the longbits program to determine the length.
#
#LONG_BITS=
LONG_BITS= 32
#LONG_BITS= 64


endian:	endian.c
	-@rm -f endian.o endian
	$(CC) $< -o $@

longbits: longbits.c
	-@rm -f longbits.o longbits
	$(CC) $< -o $@

calcendian.h: endian
	-@rm -f calcendian.h
	@echo 'forming calcendian.h'
	@echo '/*' > calcendian.h
	@echo ' * DO NOT EDIT -- generated by the Makefile' >> calcendian.h
	@echo ' */' >> calcendian.h
	@echo '' >> calcendian.h
	-@if test X"${BYTE_ORDER}" = X ; then \
	    if [ -f /usr/include/machine/endian.h ]; then \
		echo '#include <machine/endian.h>' >> endian.h; \
	    else \
		./endian >> calcendian.h; \
	    fi; \
	else \
	    echo "#define BYTE_ORDER ${BYTE_ORDER}" >> calcendian.h; \
	fi
	@echo 'calcendian.h formed'

longbits.h: longbits
	-@rm -f longbits.h
	@echo 'forming longbits.h'
	@echo '/*' > longbits.h
	@echo ' * DO NOT EDIT -- generated by the Makefile' >> longbits.h
	@echo ' */' >> longbits.h
	@echo '' >> longbits.h
	-@if test X"${LONG_BITS}" = X ; then \
	    ./longbits >> longbits.h; \
	else \
	    echo "#define LONG_BITS ${LONG_BITS}" >> longbits.h; \
	fi
	@echo 'longbits.h formed'


#------------------------------------------------------------------------------
# how to build objects for mpexpr and libMpexpr

C_OBJ = $(CC) -c -I$(TCL_INC_DIR) -I. -I$(SRC_DIR)/../generic $(TCL_DEFS)

%.o:	%.c longbits.h calcendian.h
	$(C_OBJ) @<

C_SHOBJ = $(CC) $(TCL_SHLIB_CFLAGS) -c -I$(TCL_INC_DIR) \
	-I.. -I$(SRC_DIR)/../generic $(TCL_DEFS)

shared/%.o:	%.c longbits.h calcendian.h
	mkdir -p shared
	(cd shared; $(C_SHOBJ) $< )

#------------------------------------------------------------------------------
# how to build objects for standard tcl


$(LIB_MPEXPR):  $(MPEXPR_OBJ)
	-@rm $(LIB_MPEXPR)
	ar cr $(LIB_MPEXPR) $(MPEXPR_OBJ)

$(LIB_SH_MPEXPR):  $(MPEXPR_SH_OBJ)
	(cd shared; \
	$(TCL_SHLIB_LD)  $(TCL_LD_SEARCH_FLAGS) \
	      -o ../$(LIB_SH_MPEXPR) $(MPEXPR_OBJ) \
	      $(TCL_LIB_SPEC) $(TCL_LIBS) \
	)

#------------------------------------------------------------------------------
# how to build objects for standard tcl

TCL_APPINIT   = $(TCL_LIB_DIR)/tcl$(TCL_VERSION)/tclAppInit.c
TK_APPINIT    = $(TCL_LIB_DIR)/tk$(TK_VERSION)/tkAppInit.c

tclAppInit.c:   $(TCL_APPINIT)
	sed -f mpinit.sed <$(TCL_APPINIT) >tclAppInit.c

tkAppInit.c:    $(TK_APPINIT)
	sed -f mpinit.sed <$(TK_APPINIT) >tkAppInit.c

tclAppInit.o:   tclAppInit.c
	$(CC) -c -I$(TCL_INC_DIR) $(TCL_DEFS) tclAppInit.c

tkAppInit.o:    tkAppInit.c
	$(CC) -c -I$(TCL_INC_DIR) $(TK_XINCLUDES) tkAppInit.c


#------------------------------------------------------------------------------
# how to build objects for neosoft extended tcl

TCLX_APPINIT  = $(prefix)/$(TCLX_LIB_LOC)tclX$(TCLX_LIB_SEP)$(TCLX_FULL_VERSION)/tclXAppInit.c
TKX_APPINIT   = $(prefix)/$(TCLX_LIB_LOC)tkX$(TCLX_LIB_SEP)$(TKX_FULL_VERSION)/tkXAppInit.c

tclXAppInit.c:	$(TCLX_APPINIT)
	sed -f mpinit.sed <$(TCLX_APPINIT) >tclXAppInit.c

tkXAppInit.c:	$(TKX_APPINIT)
	sed -f mpinit.sed <$(TKX_APPINIT)  >tkXAppInit.c

tclXAppInit.o:	tclXAppInit.c
	$(CC)  -c -I$(TCL_INC_DIR) $(TCL_DEFS)  tclXAppInit.c

tkXAppInit.o:	tkXAppInit.c
	$(CC)  -c -I$(TCL_INC_DIR) $(TCL_DEFS) $(TK_XINCLUDES) tkXAppInit.c


#------------------------------------------------------------------------------
# how to build executables and man page

$(TCL_EXEC):   $(LIB_MPEXPR) tclAppInit.o
	$(CC) tclAppInit.o    $(TCL_LD_FLAGS) $(TCL_LD_SEARCH_FLAGS) \
	       -L. $(LNK_MPEXPR) \
	       $(TCL_LIB_SPEC) $(TCL_LIBS) \
	       -o $(TCL_EXEC)

$(WISH_EXEC):  $(LIB_MPEXPR)  tkAppInit.o
	$(CC) tkAppInit.o $(TCL_LD_FLAGS) $(TCL_LD_SEARCH_FLAGS) \
	       -L. $(LNK_MPEXPR) \
	       $(TK_LIB_SPEC)  $(TK_LIBS) \
	       $(TCL_LIB_SPEC) $(TCL_LIBS) \
	       -o $(WISH_EXEC)

$(TCLX_EXEC):  $(LIB_MPEXPR) tclXAppInit.o 
	$(CC) tclXAppInit.o   $(TCL_LD_FLAGS) $(TCL_LD_SEARCH_FLAGS) \
	       -L. $(LNK_MPEXPR) \
	       $(TCLX_LIB_SPEC) \
               $(TCL_LIB_SPEC) $(TCLX_LIBS) $(TCL_LIBS) \
	       -o $(TCLX_EXEC)

$(WISHX_EXEC): $(LIB_MPEXPR) tkXAppInit.o
	$(CC) tkXAppInit.o   $(TCL_LD_FLAGS) $(TCL_LD_SEARCH_FLAGS) \
	       -L. $(LNK_MPEXPR) \
	       $(TKX_LIB_SPEC) $(TCLX_LIB_SPEC) \
	       $(TK_LIB_SPEC) $(TCL_LIB_SPEC) \
	       $(TK_LIBS) $(TKX_LIBS) $(TCLX_LIBS) $(TCL_LIBS) \
	       -o $(WISHX_EXEC)

$(MAN_PAGE):	$(SRC_DIR)/../doc/mpexpr.man
	cp $< $(MAN_PAGE)

man-formatted: $(SRC_DIR)/../doc/mpexpr.man
	rman -f html $< > ../doc/mpexpr.html
	nroff -man $< > ../doc/mpexpr.txt
	groff -Tps -man $< > ../doc/mpexpr.ps


#------------------------------------------------------------------------------
# test

tests: test

test:
	@if test -x "$(T_EXEC)" ; then \
	    echo running tests with ./$(T_EXEC) ; \
	    ./$(T_EXEC)  ../tests/mpexpr.test ; \
	    ./$(T_EXEC)  ../tests/mpformat.test ; \
	else \
	    echo running tests with $(BIN_DIR)/tclsh$(TCL_VERSION) ; \
	    $(BIN_DIR)/tclsh$(TCL_VERSION)  ../tests/mpexpr.test ; \
	    $(BIN_DIR)/tclsh$(TCL_VERSION)  ../tests/mpformat.test ; \
	fi


#------------------------------------------------------------------------------
# install targets

#install:	install-shared  install-man install-tools
install:	install-shared  install-man

install-shared:	$(LIB_SH_MPEXPR)   
	@echo installing $(LIB_SH_MPEXPR)
	$(INSTALL_PROGRAM) $(LIB_SH_MPEXPR)  $(LIB_DIR)/$(LIB_SH_MPEXPR)
	@echo installing pkgIndex.tcl
	-mkdir $(LIB_DIR)/Mpexpr$(MPEXPR_LIBVER)
	$(INSTALL_DATA) pkgIndex.tcl  $(LIB_DIR)/Mpexpr$(MPEXPR_LIBVER)/pkgIndex.tcl

install-static:	libMpexpr10.dylib   $(LIB_MPEXPR)
	@for f in $(T_EXEC) $(W_EXEC) ; do  \
	  if test -x $$f ; then  \
	    echo installing $$f; \
	    $(INSTALL_PROGRAM) $$f  $(BIN_DIR)/$$f ; \
	  fi ; \
	  done
	@echo installing $(LIB_MPEXPR)
	$(INSTALL_DATA)    $(LIB_MPEXPR) $(LIB_DIR)/$(LIB_MPEXPR)

install-man:	$(MAN_PAGE)
	@echo installing $(MAN_PAGE)
	$(INSTALL_DATA)    $(MAN_PAGE)  $(MANN_DIR)/$(MAN_PAGE)

install-tools:
	for file in mpksc ; do \
	  echo "installing $$file" ; \
	  if test "install-shared" = "install-shared" ; then \
	        echo '#!$(BIN_DIR)/wish$(TK_VERSION)' >$(BIN_DIR)/$$file ; \
	  else \
	        echo '#!$(BIN_DIR)/$(W_EXEC)' >$(BIN_DIR)/$$file ; \
	  fi ; \
	  cat ../samples/$$file >>$(BIN_DIR)/$$file ; \
	  chmod 755 $(BIN_DIR)/$$file ; \
	done


clean:
	rm -f $(T_EXEC) $(W_EXEC) $(MAN_PAGE) \
	      $(LIB_MPEXPR) $(LIB_SH_MPEXPR)  \
	      endian longbits \
	      calcendian.h longbits.h \
	      tclXAppInit.c tkXAppInit.c tclXAppInit.o tkXAppInit.o     \
	      tclAppInit.c  tkAppInit.c  tclAppInit.o  tkAppInit.o      \
	      *.o shared/*.o \
	      config.cache config.log

really-clean:	clean
	rm -f Makefile config.status install pkgIndex.tcl


###############################################################################
# end of Makefile
###############################################################################