{
This file is part of the Free Pascal run time library.
Copyright (c) 1999-2000 by Carl-Eric Codere,
member of the Free Pascal development team.
See the file COPYING.FPC, included in this distribution,
for details about the copyright.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
**********************************************************************}
{****************************************************************************
m68k.inc : Processor dependent implementation of system unit
For Motorola 680x0 Processor.
*****************************************************************************}
{****************************************************************************}
{ Credit where credit is due: }
{ -Some of the copy routines taken from the Atari dlib source code: }
{ Dale Schumacher (alias: Dalnefre') dal@syntel.uucp }
{ 399 Beacon Ave. St. Paul, MN 55104,USA }
{ -Some of the routines taken from the freeware ATARI Sozobon C compiler }
{ 1988 by Sozobon, Limited. Author: Johann Ruegg (freeware) }
{ Thanks to all these people wherever they maybe today! }
{****************************************************************************}
procedure fpc_cpuinit;
begin
end;
{$define FPC_SYSTEM_HAS_GET_FRAME}
function get_frame : pointer; assembler;
asm
move.l a6,d0
end;
{$define FPC_SYSTEM_HAS_GET_CALLER_ADDR}
function get_caller_addr(framebp : pointer) : pointer;
begin
asm
move.l framebp,a0
cmp.l #0,a0
beq @Lnul_address
move.l 4(a0),a0
@Lnul_address:
move.l a0,@RESULT
end ['a0'];
end;
{$define FPC_SYSTEM_HAS_GET_CALLER_FRAME}
function get_caller_frame(framebp : pointer) : pointer;
begin
asm
move.l FRAMEBP,a0
cmp.l #0,a0
beq @Lnul_frame
move.l (a0),a0
@Lnul_frame:
move.l a0,@RESULT
end ['a0'];
end;
{$define FPC_SYSTEM_HAS_SPTR}
function Sptr : pointer; assembler;
asm
move.l sp,d0
end ['d0'];
{$define FPC_SYSTEM_HAS_FILLCHAR}
procedure FillChar(var x;count:longint;value:byte); assembler;
asm
move.l 8(a6), a0 { destination }
move.l 12(a6), d1 { number of bytes to fill }
move.b 16(a6),d0 { fill data }
cmpi.l #65535, d1 { check, if this is a word move }
ble @LMEMSET3 { use fast dbra mode }
bra @LMEMSET2
@LMEMSET1:
move.b d0,(a0)+
@LMEMSET2:
subq.l #1,d1
cmp.l #-1,d1
bne @LMEMSET1
bra @LMEMSET5 { finished slow mode , exit }
@LMEMSET4: { fast loop mode section 68010+ }
move.b d0,(a0)+
@LMEMSET3:
dbra d1,@LMEMSET4
@LMEMSET5:
end ['d0','d1','a0'];
{$ifdef dummy}
{ procedure strcopy(dstr,sstr : pointer;len : longint);[public,alias: 'STRCOPY'];}
procedure strcopy; assembler;[public,alias: 'FPC_STRCOPY'];
{---------------------------------------------------}
{ Low-level routine to copy a string to another }
{ string with maximum length. Never call directly! }
{ On Entry: }
{ a1.l = string to copy to }
{ a0.l = source string }
{ d0.l = maximum length of copy }
{ registers destroyed: a0,a1,d0,d1 }
{---------------------------------------------------}
asm
{ move.l 12(a6),a0
move.l 16(a6),a1
move.l 8(a6),d1 }
move.l d0,d1
move.b (a0)+,d0 { Get source length }
and.w #$ff,d0
cmp.w d1,d0 { This is a signed comparison! }
ble @LM4
move.b d1,d0 { If longer than maximum size of target, cut
source length }
@LM4:
andi.l #$ff,d0 { zero extend d0-byte }
move.l d0,d1 { save length to copy }
move.b d0,(a1)+ { save new length }
{ Check if copying length is zero - if so then }
{ exit without copying anything. }
tst.b d1
beq @Lend
bra @LMSTRCOPY55
@LMSTRCOPY56: { 68010 Fast loop mode }
move.b (a0)+,(a1)+
@LMSTRCOPY55:
dbra d1,@LMSTRCOPY56
@Lend:
end;
{ Concatenate Strings }
{ PARAMETERS ARE REVERSED COMPARED TO NORMAL! }
{ therefore online assembler may not parse the params as normal }
procedure strconcat(s1,s2 : pointer);[public,alias: 'STRCONCAT'];
begin
asm
move.b #255,d0
move.l s1,a0 { a0 = destination }
move.l s2,a1 { a1 = source }
sub.b (a0),d0 { copyl:= 255 -length(s1) }
move.b (a1),d6
and.w #$ff,d0 { Sign flags are checked! }
and.w #$ff,d6
cmp.w d6,d0 { if copyl > length(s2) then }
ble @Lcontinue
move.b (a1),d0 { copyl:=length(s2) }
@Lcontinue:
move.b (a0),d6
and.l #$ff,d6
lea 1(a0,d6),a0 { s1[length(s1)+1] }
add.l #1,a1 { s2[1] }
move.b d0,d6
{ Check if copying length is zero - if so then }
{ exit without copying anything. }
tst.b d6
beq @Lend
bra @ALoop
@Loop:
move.b (a1)+,(a0)+ { s1[i] := s2[i]; }
@ALoop:
dbra d6,@Loop
move.l s1,a0
add.b d0,(a0) { change to new string length }
@Lend:
end ['d0','d1','a0','a1','d6'];
end;
{ Compares strings }
{ DO NOT CALL directly. }
{ a0 = pointer to first string to compare }
{ a1 = pointer to second string to compare }
{ ALL FLAGS are set appropriately. }
{ ZF = strings are equal }
{ REGISTERS DESTROYED: a0, a1, d0, d1, d6 }
procedure strcmp; assembler;[public,alias:'FPC_STRCMP'];
asm
move.b (a0)+,d0 { Get length of first string }
move.b (a1)+,d6 { Get length of 2nd string }
move.b d6,d1 { Save length of string for final compare }
cmp.b d0,d6 { Get shortest string length }
ble @LSTRCONCAT1
move.b d0,d6 { Set length to shortest string }
@LSTRCONCAT1:
tst.b d6 { Both strings have a length of zero, exit }
beq @LSTRCONCAT2
andi.l #$ff,d6
subq.l #1,d6 { subtract first attempt }
{ if value is -1 then don't loop and just compare lengths of }
{ both strings before exiting. }
bmi @LSTRCONCAT2
or.l d0,d0 { Make sure to set Zerfo flag to 0 }
@LSTRCONCAT5:
{ Workaroung for GAS v.134 bug }
{ old: cmp.b (a1)+,(a0)+ }
cmpm.b (a1)+,(a0)+
@LSTRCONCAT4:
dbne d6,@LSTRCONCAT5 { Repeat until not equal }
bne @LSTRCONCAT3
@LSTRCONCAT2:
{ If length of both string are equal }
{ Then set zero flag }
cmp.b d1,d0 { Compare length - set flag if equal length strings }
@LSTRCONCAT3:
end;
{$endif dummy}
{$define FPC_SYSTEM_HAS_MOVE}
procedure move(const source;var dest;count : longint);
{ base pointer+8 = source }
{ base pointer+12 = destination }
{ base pointer+16 = number of bytes to move}
begin
asm
clr.l d0
move.l 16(a6),d0 { number of bytes }
@LMOVE0:
move.l 12(a6),a1 { destination }
move.l 8(a6),a0 { source }
cmpi.l #65535, d0 { check, if this is a word move }
ble @LMEMSET00 { use fast dbra mode 68010+ }
cmp.l a0,a1 { check copy direction }
bls @LMOVE4
add.l d0,a0 { move pointers to end }
add.l d0,a1
bra @LMOVE2
@LMOVE1:
move.b -(a0),-(a1) { (s < d) copy loop }
@LMOVE2:
subq.l #1,d0
cmpi.l #-1,d0
bne @LMOVE1
bra @LMOVE5
@LMOVE3:
move.b (a0)+,(a1)+ { (s >= d) copy loop }
@LMOVE4:
subq.l #1,d0
cmpi.l #-1,d0
bne @LMOVE3
bra @LMOVE5
@LMEMSET00: { use fast loop mode 68010+ }
cmp.l a0,a1 { check copy direction }
bls @LMOVE04
add.l d0,a0 { move pointers to end }
add.l d0,a1
bra @LMOVE02
@LMOVE01:
move.b -(a0),-(a1) { (s < d) copy loop }
@LMOVE02:
dbra d0,@LMOVE01
bra @LMOVE5
@LMOVE03:
move.b (a0)+,(a1)+ { (s >= d) copy loop }
@LMOVE04:
dbra d0,@LMOVE03
{ end fast loop mode }
@LMOVE5:
end ['d0','a0','a1'];
end;
{$define FPC_SYSTEM_HAS_FILLWORD}
procedure fillword(var x;count : longint;value : word);
begin
asm
move.l 8(a6), a0 { destination }
move.l 12(a6), d1 { number of bytes to fill }
move.w 16(a6),d0 { fill data }
bra @LMEMSET21
@LMEMSET11:
move.w d0,(a0)+
@LMEMSET21:
subq.l #1,d1
cmp.b #-1,d1
bne @LMEMSET11
end ['d0','d1','a0'];
end;
{$define FPC_SYSTEM_HAS_ABS_LONGINT}
function abs(l : longint) : longint;
begin
asm
move.l 8(a6),d0
tst.l d0
bpl @LMABS1
neg.l d0
@LMABS1:
move.l d0,@RESULT
end ['d0'];
end;
function InterLockedDecrement (var Target: longint) : longint;
begin
{$warning FIX ME}
end;
function InterLockedIncrement (var Target: longint) : longint;
begin
{$warning FIX ME}
end;
function InterLockedExchange (var Target: longint;Source : longint) : longint;
begin
{$warning FIX ME}
end;
function InterLockedExchangeAdd (var Target: longint;Source : longint) : longint;
begin
{$warning FIX ME}
end;
function InterlockedCompareExchange(var Target: longint; NewValue: longint; Comperand: longint): longint;
begin
{$warning FIX ME}
end;
syntax highlighted by Code2HTML, v. 0.9.1