{
$Id: bunxfunc.inc,v 1.7 2003/12/30 12:26:21 marco Exp $
This file is part of the Free Pascal run time library.
Copyright (c) 2002 by Marco van de Voort
Calls needed for the POSIX unit, but not for system.
Some calls that can be used for both Linux and *BSD will be
moved to a /unix/ includedfile later.
See the file COPYING.FPC, included in this distribution,
for details about the copyright.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
**********************************************************************}
{$ifndef FPC_USE_LIBC}
{$i syscallh.inc} // do_syscall declarations themselves
{$i sysnr.inc} // syscall numbers.
{$i ossysch.inc} // external interface to syscalls in system unit.
{$endif}
{$i genfuncs.inc} // generic calls. (like getenv)
{$I gensigset.inc} // general sigset funcs implementation.
{$I genfdset.inc} // general fdset funcs.
{$ifndef FPC_USE_LIBC}
{ $ ifndef ver1_0}
Function FpSigProcMask(how : cInt; Const nset : TSigSet; var oset : TSigSet): cInt; external name 'FPC_SYSC_SIGPROCMASK';
{ $ endif}
{$USER BLA!}
Function FPKill(Pid:pid_t;Sig:cint):cint;
{
Send signal 'sig' to a process, or a group of processes.
If Pid > 0 then the signal is sent to pid
pid=-1 to all processes except process 1
pid < -1 to process group -pid
Return value is zero, except for case three, where the return value
is the number of processes to which the signal was sent.
}
begin
FPkill:=do_syscall(syscall_nr_kill,pid,sig);
// if kill<0 THEN
// Kill:=0;
end;
Function FPSigPending(var nset: sigset_t):cint;
{
Allows examination of pending signals. The signal mask of pending
signals is set in SSet
}
begin
FPsigpending:=do_syscall(syscall_nr_sigpending,longint(@nset));
end;
function FPsigsuspend(const sigmask:sigset_t):cint;
{
Set the signal mask with Mask, and suspend the program until a signal
is received.
}
begin
FPsigsuspend:= do_syscall(syscall_nr_sigsuspend,longint(@sigmask));
end;
Type // implementation side for now. Should move to BSD unit.
ITimerVal= Record
It_Interval,
It_Value : TimeVal;
end;
Const ITimer_Real =0;
ITimer_Virtual =1;
ITimer_Prof =2;
Function SetITimer(Which : Longint;Const value : ItimerVal; var VarOValue:ItimerVal):Longint;
Begin
SetItimer:=Do_Syscall(syscall_nr_setitimer,Which,Longint(@Value),longint(@varovalue));
End;
Function GetITimer(Which : Longint;Var value : ItimerVal):Longint;
Begin
GetItimer:=Do_Syscall(syscall_nr_getItimer,Which,Longint(@value));
End;
Function FPalarm(Seconds: cuint):cuint;
Var it,oitv : Itimerval;
Begin
// register struct itimerval *itp = ⁢
it.it_interval.tv_sec:=0;
it.it_interval.tv_usec:=0;
it.it_value.tv_sec:=seconds;
it.it_value.tv_usec:=0;
If SetITimer(ITIMER_REAL,it,oitv)<0 Then
Exit(-1);
if oitv.it_value.tv_usec<>0 Then
Inc(oitv.it_value.tv_sec);
FPAlarm:=oitv.it_value.tv_sec;
End;
function sigblock(mask:cuint):cint;
{Depreciated, but used by pause.}
var nset,oset: sigset_t;
begin
FPsigemptyset(nset);
nset[0]:=mask;
sigblock:= FPsigprocmask(SIG_BLOCK,@nset,@oset); // SIG_BLOCK=1
if sigblock=0 Then
sigblock:=oset[0];
end;
function sigpause(sigmask:cint):cint;
{Depreciated, but used by pause.}
var nset: sigset_t;
begin
FPsigemptyset(nset);
nset[0]:=sigmask;
sigpause:= FPsigsuspend(nset);
end;
function FPpause:cint;
begin
FPpause:=sigpause(sigblock(cuint(0)));
end;
function FPsleep(seconds:cuint):cuint;
var time_to_sleep,time_remaining : timespec;
begin
{
* Avoid overflow when `seconds' is huge. This assumes that
* the maximum value for a time_t is >= INT_MAX.
}
if seconds > high(cint) Then
FPsleep:= (seconds - high(cint)) + FPsleep(HIGH(cint));
time_to_sleep.tv_sec := seconds;
time_to_sleep.tv_nsec := 0;
if (FPnanosleep(@time_to_sleep, @time_remaining) <> -1) Then
Exit(0);
if (geterrno <> ESysEINTR) Then // EAGAIN?
Exit (seconds); { best guess }
FPsleep:= time_remaining.tv_sec;
if (time_remaining.tv_nsec <> 0) Then
inc(FPsleep);
End;
function FPuname(var name:utsname):cint; [public,alias:'FPC_SYSC_UNAME'];
Var
mib : array[0..1] of cint;
rval : cint;
len : size_t;
i : longint;
oerrno : cint;
procedure Doone(pz:pchar;pzsize:cint;val1,val2:cint);
Begin
mib[0] := val1;
mib[1] := val2;
len := pzsize;
oerrno := geterrno;
if (FPsysctl(@mib, 2, pz, @len, NIL, 0) = -1) Then
Begin
if (geterrno = ESysENOMEM) Then
seterrno(oerrno)
else
rval := -1;
End;
pz[pzsize- 1] := #0;
End;
Begin
rval := 0;
DoOne(@name.sysname,sizeof(name.sysname),CTL_KERN,KERN_OSTYPE);
DoOne(@name.nodename,sizeof(name.nodename),CTL_KERN,KERN_HOSTNAME);
DoOne(@name.release,sizeof(name.release),CTL_KERN,KERN_OSRELEASE);
{ The version may have newlines in it, turn them into spaces. }
DoOne(@name.version,sizeof(name.version),CTL_KERN,KERN_VERSION);
For I:=0 to sizeof(name.sysname)-2 Do
If (name.version[i]=#13) or (name.version[i]=#9) Then
name.version[i]:=' ';
DoOne(@name.machine,sizeof(name.machine),CTL_HW,HW_MACHINE);
FPUname:=rval;
end;
function GetDomainName(Name:PChar; NameLen:Cint):cint; [public,alias:'FPC_SYSC_GETDOMAINNAME'];
Const Mib_GetDomainName : array[0..1] of cint=(CTL_KERN,KERN_NISDOMAINNAME);
VAR
tsize : size_t;
begin
tsize := namelen;
if (FPsysctl(@Mib_GetDomainname, 2, name, @tsize, NIL, 0) = -1) Then
GetDomainName:=-1
Else
GetDomainName:=0;
end;
function GetHostName(Name:PChar; NameLen:Cint):cint;[public,alias:'FPC_SYSC_GETHOSTNAME'];
Const Mib_GetHostName : array[0..1] of cint=(CTL_KERN,KERN_HOSTNAME);
Var
tsize : size_t;
begin
tsize := namelen;
if (FPsysctl(@Mib_GetHostName, 2, name, @tsize, NIL, 0) = -1) Then
GetHostName:=-1
Else
GetHostName:=0;
End;
const WAIT_ANY = -1;
function FPwait(var stat_loc:cint): pid_t;
{
Waits until a child with PID Pid exits, or returns if it is exited already.
Any resources used by the child are freed.
The exit status is reported in the adress referred to by Status. It should
be a longint.
}
begin // actually a wait4() call with 4th arg 0.
FPWait:=do_syscall(syscall_nr_WaitPID,WAIT_ANY,longint(@Stat_loc),0,0);
end;
//function FPgetpid : pid_t;
// begin
// FPgetpid:=do_syscall(syscall_nr_getpid);
// end;
function FPgetppid : pid_t;
begin
FPgetppid:=do_syscall(syscall_nr_getppid);
end;
function FPgetuid : uid_t;
begin
FPgetuid:=do_syscall(syscall_nr_getuid);
end;
function FPgeteuid : uid_t;
begin
FPgeteuid:=do_syscall(syscall_nr_geteuid);
end;
function FPgetgid : gid_t;
begin
FPgetgid:=do_syscall(syscall_nr_getgid);
end;
function FPgetegid : gid_t;
begin
FPgetegid:=do_syscall(syscall_nr_getegid);
end;
function FPsetuid(uid : uid_t): cint;
begin
FPsetuid:=do_syscall(syscall_nr_setuid,uid);
end;
function FPsetgid(gid : gid_t): cint;
begin
FPsetgid:=do_syscall(syscall_nr_setgid,gid);
end;
// type tgrparr=array[0..0] of gid_t;
function FPgetgroups(gidsetsize : cint; var grouplist:tgrparr): cint;
begin
FPgetgroups:=do_syscall(syscall_nr_getgroups,gidsetsize,longint(@grouplist));
end;
function FPgetpgrp : pid_t;
begin
FPgetpgrp:=do_syscall(syscall_nr_getpgrp);
end;
function FPsetsid : pid_t;
begin
FPsetsid:=do_syscall(syscall_nr_setsid);
end;
Function FPumask(cmask:mode_t):mode_t;
{
Sets file creation mask to (Mask and 0777 (octal) ), and returns the
previous value.
}
begin
FPumask:=Do_syscall(syscall_nr_umask,cmask);
end;
Function FPlink(existing:pchar;newone:pchar):cint;
{
Proceduces a hard link from new to old.
In effect, new will be the same file as old.
}
begin
FPLink:=Do_Syscall(syscall_nr_link,longint(existing),longint(newone));
end;
Function FPmkfifo(path:pchar;mode:mode_t):cint;
begin
FPmkfifo:=do_syscall(syscall_nr_mkfifo,longint(path),longint(mode));
end;
Function FPchmod(path:pchar;mode:mode_t):cint;
begin
FPchmod:=do_syscall(syscall_nr_chmod,longint(path),longint(mode));
end;
Function FPchown(path:pchar;owner:uid_t;group:gid_t):cint;
begin
FPChOwn:=do_syscall(syscall_nr_chown,longint(path),longint(owner),longint(group));
end;
Function FPUtime(path:pchar;times:putimbuf):cint;
var tv : array[0..1] of timeval;
tvp : ^timeval;
begin
if times=nil Then
tvp:=nil
else
begin
tv[0].tv_sec :=times^.actime;
tv[1].tv_sec :=times^.modtime;
tv[0].tv_usec:=0;
tv[1].tv_usec:=0;
tvp:=@tv;
end;
FPutime:=do_syscall(syscall_nr_utimes,longint(path),longint(tvp));
end;
Function FPpipe(var fildes : tfildes):cint;
begin
FPpipe:=do_syscall(syscall_nr_pipe,longint(@fildes));
end;
function FPfcntl(fildes:cint;Cmd:cint;Arg:cint):cint;
begin
FPfcntl:=do_syscall(syscall_nr_fcntl,fildes,cmd,arg);
end;
function FPfcntl(fildes:cint;Cmd:cint;var Arg:flock):cint;
begin
FPfcntl:=do_syscall(syscall_nr_fcntl,fildes,cmd,longint(@arg));
end;
function FPfcntl(fildes:cint;Cmd:cint):cint;
begin
FPfcntl:=do_syscall(syscall_nr_fcntl,fildes,cmd);
end;
function FPexecve(path:pchar;argv:ppchar;envp:ppchar):cint;
Begin
FPexecve:=do_syscall(syscall_nr_Execve,longint(path),longint(argv),longint(envp));
End;
function FPexecv(path:pchar;argv:ppchar):cint;
Begin
FPexecv:=do_syscall(syscall_nr_Execve,longint(path),longint(argv),longint(envp));
End;
CONST RUSAGE_SELF = 0;
RUSAGE_CHILDREN = -1;
function FPgetrusage(who:cint;var ru : rusage):cint;
begin
FPgetrusage:=do_syscall(syscall_nr_getrusage,longint(who),longint(@ru));
end;
function FPtimes(var buffer : tms):clock_t;
var ru : rusage;
t : timeval;
CONST CLK_TCK=128;
function CONVTCK(r:timeval):clock_t;
{
* Convert usec to clock ticks; could do (usec * CLK_TCK) / 1000000,
* but this would overflow if we switch to nanosec.
}
begin
CONVTCK:=(r.tv_sec * CLK_TCK + r.tv_usec DIV (1000000 DIV CLK_TCK));
end;
begin
if (FPgetrusage(RUSAGE_SELF, ru) < 0) Then
exit(clock_t(-1));
buffer.tms_utime := CONVTCK(ru.ru_utime);
buffer.tms_stime := CONVTCK(ru.ru_stime);
if (FPgetrusage(RUSAGE_CHILDREN, ru) < 0) Then
exit(clock_t(-1));
buffer.tms_cutime := CONVTCK(ru.ru_utime);
buffer.tms_cstime := CONVTCK(ru.ru_stime);
if do_syscall(syscall_nr_gettimeofday,longint(@t),0)<>0 Then
exit(clock_t(-1));
FPtimes:=clock_t(CONVTCK(t));
end;
Function fpSelect(N:cint;readfds,writefds,exceptfds:pfdSet;TimeOut:PTimeVal):cint;
{
Select checks whether the file descriptor sets in readfs/writefs/exceptfs
have changed.
}
begin
fpSelect:=do_syscall(syscall_nr_select,n,longint(readfds),longint(writefds),longint(exceptfds),longint(timeout));
end;
{$endif}
{
$Log: bunxfunc.inc,v $
Revision 1.7 2003/12/30 12:26:21 marco
* FPC_USE_LIBC
Revision 1.6 2003/11/18 10:12:25 marco
* Small fixes for EAGAIN. bunxfunc only has comments added.
Revision 1.5 2003/10/26 17:01:04 marco
* moved sigprocmask to system
Revision 1.4 2003/09/27 13:45:58 peter
* fpnanosleep exported in baseunix
* fpnanosleep has pointer arguments to be C compliant
Revision 1.3 2003/09/14 20:15:01 marco
* Unix reform stage two. Remove all calls from Unix that exist in Baseunix.
Revision 1.2 2003/01/05 19:10:05 marco
* Small sigprocmask fix
Revision 1.1 2003/01/05 19:01:28 marco
* FreeBSD compiles now with baseunix mods.
Revision 1.11 2002/11/14 13:25:27 marco
* Fix setitimer.
Revision 1.10 2002/11/14 12:34:20 marco
* took out the generic sethandling.
Revision 1.9 2002/11/13 18:15:08 marco
* sigset functions more flexible, small changes to FPtime
Revision 1.8 2002/10/27 17:21:29 marco
* Only "difficult" functions + execvp + termios + rewinddir left to do
Revision 1.7 2002/10/27 11:58:29 marco
* Modifications from Saturday.
Revision 1.6 2002/10/26 18:27:51 marco
* First series POSIX calls commits. Including getcwd.
Revision 1.5 2002/10/25 15:46:48 marco
* Should be alias.
Revision 1.4 2002/09/08 16:20:27 marco
* Forgot external name's
Revision 1.3 2002/09/08 16:11:59 marco
* Added GetDomainName and that other one ..
Revision 1.2 2002/09/07 16:01:17 peter
* old logs removed and tabs fixed
Revision 1.1 2002/08/21 07:03:16 marco
* Fixes from Tuesday.
Revision 1.1 2002/08/08 11:39:30 marco
* Initial versions, to allow support for uname in posix.pp
}
syntax highlighted by Code2HTML, v. 0.9.1