{
$Id: ppu.pas,v 1.44 2003/11/10 22:02:52 peter Exp $
Copyright (c) 1998-2002 by Florian Klaempfl
Routines to read/write ppu files
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit ppu;
{$i fpcdefs.inc}
interface
{ Also write the ppu if only crc if done, this can be used with ppudump to
see the differences between the intf and implementation }
{ define INTFPPU}
{$ifdef Test_Double_checksum}
var
CRCFile : text;
const
CRC_array_Size = 200000;
type
tcrc_array = array[0..crc_array_size] of longint;
pcrc_array = ^tcrc_array;
{$endif Test_Double_checksum}
const
CurrentPPUVersion=38;
{ buffer sizes }
maxentrysize = 1024;
ppubufsize = 16384;
{ppu entries}
mainentryid = 1;
subentryid = 2;
{special}
iberror = 0;
ibstartdefs = 248;
ibenddefs = 249;
ibstartsyms = 250;
ibendsyms = 251;
ibendinterface = 252;
ibendimplementation = 253;
ibendbrowser = 254;
ibend = 255;
{general}
ibmodulename = 1;
ibsourcefiles = 2;
ibloadunit = 3;
ibinitunit = 4;
iblinkunitofiles = 5;
iblinkunitstaticlibs = 6;
iblinkunitsharedlibs = 7;
iblinkotherofiles = 8;
iblinkotherstaticlibs = 9;
iblinkothersharedlibs = 10;
ibdbxcount = 11;
ibsymref = 12;
ibdefref = 13;
ibendsymtablebrowser = 14;
ibbeginsymtablebrowser = 15;
ibusedmacros = 16;
ibderefdata = 17;
{syms}
ibtypesym = 20;
ibprocsym = 21;
ibvarsym = 22;
ibconstsym = 23;
ibenumsym = 24;
ibtypedconstsym = 25;
ibabsolutesym = 26;
ibpropertysym = 27;
ibvarsym_C = 28;
ibunitsym = 29; { needed for browser }
iblabelsym = 30;
ibsyssym = 31;
ibrttisym = 32;
{definitions}
iborddef = 40;
ibpointerdef = 41;
ibarraydef = 42;
ibprocdef = 43;
ibshortstringdef = 44;
ibrecorddef = 45;
ibfiledef = 46;
ibformaldef = 47;
ibobjectdef = 48;
ibenumdef = 49;
ibsetdef = 50;
ibprocvardef = 51;
ibfloatdef = 52;
ibclassrefdef = 53;
iblongstringdef = 54;
ibansistringdef = 55;
ibwidestringdef = 56;
ibvariantdef = 57;
{implementation/objectdata}
ibnodetree = 80;
ibasmsymbols = 81;
{ unit flags }
uf_init = $1;
uf_finalize = $2;
uf_big_endian = $4;
uf_has_dbx = $8;
uf_has_browser = $10;
uf_in_library = $20; { is the file in another file than <ppufile>.* ? }
uf_smart_linked = $40; { the ppu can be smartlinked }
uf_static_linked = $80; { the ppu can be linked static }
uf_shared_linked = $100; { the ppu can be linked shared }
uf_local_browser = $200;
uf_no_link = $400; { unit has no .o generated, but can still have
external linking! }
uf_has_resources = $800; { unit has resource section }
uf_little_endian = $1000;
uf_release = $2000; { unit was compiled with -Ur option }
uf_threadvars = $4000; { unit has threadvars }
uf_fpu_emulation = $8000; { this unit was compiled with fpu emulation on }
type
ppureal=extended;
tppuerror=(ppuentrytoobig,ppuentryerror);
tppuheader=packed record { 36 bytes }
id : array[1..3] of char; { = 'PPU' }
ver : array[1..3] of char;
compiler : word;
cpu : word;
target : word;
flags : longint;
size : longint; { size of the ppufile without header }
checksum : cardinal; { checksum for this ppufile }
interface_checksum : cardinal;
future : array[0..2] of longint;
end;
tppuentry=packed record
id : byte;
nr : byte;
size : longint;
end;
tppufile=class
private
f : file;
mode : byte; {0 - Closed, 1 - Reading, 2 - Writing}
fname : string;
fsize : integer;
{$ifdef Test_Double_checksum}
public
crcindex,
crc_index,
crcindex2,
crc_index2 : cardinal;
crc_test,
crc_test2 : pcrc_array;
private
{$endif def Test_Double_checksum}
change_endian : boolean;
buf : pchar;
bufstart,
bufsize,
bufidx : integer;
entrybufstart,
entrystart,
entryidx : integer;
entry : tppuentry;
closed,
tempclosed : boolean;
closepos : integer;
public
entrytyp : byte;
header : tppuheader;
size : integer;
crc,
interface_crc : cardinal;
error,
do_crc,
do_interface_crc : boolean;
crc_only : boolean; { used to calculate interface_crc before implementation }
constructor Create(const fn:string);
destructor Destroy;override;
procedure flush;
procedure closefile;
function CheckPPUId:boolean;
function GetPPUVersion:integer;
procedure NewHeader;
procedure NewEntry;
{read}
function openfile:boolean;
procedure reloadbuf;
procedure readdata(var b;len:integer);
procedure skipdata(len:integer);
function readentry:byte;
function EndOfEntry:boolean;
function entrysize:longint;
procedure getdatabuf(var b;len:integer;var res:integer);
procedure getdata(var b;len:integer);
function getbyte:byte;
function getword:word;
function getlongint:longint;
function getreal:ppureal;
function getstring:string;
procedure getnormalset(var b);
procedure getsmallset(var b);
function skipuntilentry(untilb:byte):boolean;
{write}
function createfile:boolean;
procedure writeheader;
procedure writebuf;
procedure writedata(const b;len:integer);
procedure writeentry(ibnr:byte);
procedure putdata(const b;len:integer);
procedure putbyte(b:byte);
procedure putword(w:word);
procedure putlongint(l:longint);
procedure putreal(d:ppureal);
procedure putstring(s:string);
procedure putnormalset(const b);
procedure putsmallset(const b);
procedure tempclose;
function tempopen:boolean;
end;
implementation
uses
{$ifdef Test_Double_checksum}
comphook,
{$endif def Test_Double_checksum}
crc;
{*****************************************************************************
Endian Handling
*****************************************************************************}
Function SwapLong(x : longint): longint;
var
y : word;
z : word;
Begin
y := x shr 16;
y := word(longint(y) shl 8) or (y shr 8);
z := x and $FFFF;
z := word(longint(z) shl 8) or (z shr 8);
SwapLong := (longint(z) shl 16) or longint(y);
End;
Function SwapWord(x : word): word;
var
z : byte;
Begin
z := x shr 8;
x := x and $ff;
x := word(x shl 8);
SwapWord := x or z;
End;
{*****************************************************************************
TPPUFile
*****************************************************************************}
constructor tppufile.Create(const fn:string);
begin
fname:=fn;
change_endian:=false;
crc_only:=false;
Mode:=0;
NewHeader;
Error:=false;
closed:=true;
tempclosed:=false;
getmem(buf,ppubufsize);
end;
destructor tppufile.destroy;
begin
closefile;
if assigned(buf) then
freemem(buf,ppubufsize);
end;
procedure tppufile.flush;
begin
if Mode=2 then
writebuf;
end;
procedure tppufile.closefile;
begin
{$ifdef Test_Double_checksum}
if mode=2 then
begin
if assigned(crc_test) then
dispose(crc_test);
if assigned(crc_test2) then
dispose(crc_test2);
end;
{$endif Test_Double_checksum}
if Mode<>0 then
begin
Flush;
{$I-}
system.close(f);
{$I+}
if ioresult<>0 then;
Mode:=0;
closed:=true;
end;
end;
function tppufile.CheckPPUId:boolean;
begin
CheckPPUId:=((Header.Id[1]='P') and (Header.Id[2]='P') and (Header.Id[3]='U'));
end;
function tppufile.GetPPUVersion:integer;
var
l : integer;
code : integer;
begin
Val(header.ver[1]+header.ver[2]+header.ver[3],l,code);
if code=0 then
GetPPUVersion:=l
else
GetPPUVersion:=0;
end;
procedure tppufile.NewHeader;
var
s : string;
begin
fillchar(header,sizeof(tppuheader),0);
str(currentppuversion,s);
while length(s)<3 do
s:='0'+s;
with header do
begin
Id[1]:='P';
Id[2]:='P';
Id[3]:='U';
Ver[1]:=s[1];
Ver[2]:=s[2];
Ver[3]:=s[3];
end;
end;
{*****************************************************************************
TPPUFile Reading
*****************************************************************************}
function tppufile.openfile:boolean;
var
ofmode : byte;
i : integer;
begin
openfile:=false;
assign(f,fname);
ofmode:=filemode;
filemode:=$0;
{$I-}
reset(f,1);
{$I+}
filemode:=ofmode;
if ioresult<>0 then
exit;
closed:=false;
{read ppuheader}
fsize:=filesize(f);
if fsize<sizeof(tppuheader) then
exit;
blockread(f,header,sizeof(tppuheader),i);
{ The header is always stored in little endian order }
{ therefore swap if on a big endian machine }
{$IFDEF ENDIAN_BIG}
header.compiler := SwapWord(header.compiler);
header.cpu := SwapWord(header.cpu);
header.target := SwapWord(header.target);
header.flags := SwapLong(header.flags);
header.size := SwapLong(header.size);
header.checksum := cardinal(SwapLong(longint(header.checksum)));
header.interface_checksum := cardinal(SwapLong(longint(header.interface_checksum)));
{$ENDIF}
{ the PPU DATA is stored in native order }
if (header.flags and uf_big_endian) = uf_big_endian then
Begin
{$IFDEF ENDIAN_LITTLE}
change_endian := TRUE;
{$ELSE}
change_endian := FALSE;
{$ENDIF}
End
else if (header.flags and uf_little_endian) = uf_little_endian then
Begin
{$IFDEF ENDIAN_BIG}
change_endian := TRUE;
{$ELSE}
change_endian := FALSE;
{$ENDIF}
End;
{reset buffer}
bufstart:=i;
bufsize:=0;
bufidx:=0;
Mode:=1;
FillChar(entry,sizeof(tppuentry),0);
entryidx:=0;
entrystart:=0;
entrybufstart:=0;
Error:=false;
openfile:=true;
end;
procedure tppufile.reloadbuf;
begin
inc(bufstart,bufsize);
blockread(f,buf^,ppubufsize,bufsize);
bufidx:=0;
end;
procedure tppufile.readdata(var b;len:integer);
var
p : pchar;
left,
idx : integer;
begin
p:=pchar(@b);
idx:=0;
while len>0 do
begin
left:=bufsize-bufidx;
if len>left then
begin
move(buf[bufidx],p[idx],left);
dec(len,left);
inc(idx,left);
reloadbuf;
if bufsize=0 then
exit;
end
else
begin
move(buf[bufidx],p[idx],len);
inc(bufidx,len);
exit;
end;
end;
end;
procedure tppufile.skipdata(len:integer);
var
left : integer;
begin
while len>0 do
begin
left:=bufsize-bufidx;
if len>left then
begin
dec(len,left);
reloadbuf;
if bufsize=0 then
exit;
end
else
begin
inc(bufidx,len);
exit;
end;
end;
end;
function tppufile.readentry:byte;
begin
if entryidx<entry.size then
skipdata(entry.size-entryidx);
readdata(entry,sizeof(tppuentry));
entrystart:=bufstart+bufidx;
entryidx:=0;
if not(entry.id in [mainentryid,subentryid]) then
begin
readentry:=iberror;
error:=true;
exit;
end;
readentry:=entry.nr;
end;
function tppufile.endofentry:boolean;
begin
endofentry:=(entryidx>=entry.size);
end;
function tppufile.entrysize:longint;
begin
entrysize:=entry.size;
end;
procedure tppufile.getdatabuf(var b;len:integer;var res:integer);
begin
if entryidx+len>entry.size then
res:=entry.size-entryidx
else
res:=len;
readdata(b,res);
inc(entryidx,res);
end;
procedure tppufile.getdata(var b;len:integer);
begin
if entryidx+len>entry.size then
begin
error:=true;
exit;
end;
readdata(b,len);
inc(entryidx,len);
end;
function tppufile.getbyte:byte;
var
b : byte;
begin
if entryidx+1>entry.size then
begin
error:=true;
getbyte:=0;
exit;
end;
readdata(b,1);
getbyte:=b;
inc(entryidx);
end;
function tppufile.getword:word;
var
w : word;
begin
if entryidx+2>entry.size then
begin
error:=true;
getword:=0;
exit;
end;
readdata(w,2);
if change_endian then
getword:=swapword(w)
else
getword:=w;
inc(entryidx,2);
end;
function tppufile.getlongint:longint;
var
l : longint;
begin
if entryidx+4>entry.size then
begin
error:=true;
getlongint:=0;
exit;
end;
readdata(l,4);
if change_endian then
getlongint:=swaplong(l)
else
getlongint:=l;
inc(entryidx,4);
end;
function tppufile.getreal:ppureal;
var
d : ppureal;
begin
if entryidx+sizeof(ppureal)>entry.size then
begin
error:=true;
getreal:=0;
exit;
end;
readdata(d,sizeof(ppureal));
getreal:=d;
inc(entryidx,sizeof(ppureal));
end;
function tppufile.getstring:string;
var
s : string;
begin
s[0]:=chr(getbyte);
if entryidx+length(s)>entry.size then
begin
error:=true;
exit;
end;
ReadData(s[1],length(s));
getstring:=s;
inc(entryidx,length(s));
end;
procedure tppufile.getsmallset(var b);
var
l : longint;
begin
l:=getlongint;
longint(b):=l;
end;
procedure tppufile.getnormalset(var b);
type
SetLongintArray = Array [0..7] of longint;
var
i : longint;
begin
if change_endian then
begin
for i:=0 to 7 do
SetLongintArray(b)[i]:=getlongint;
end
else
getdata(b,32);
end;
function tppufile.skipuntilentry(untilb:byte):boolean;
var
b : byte;
begin
repeat
b:=readentry;
until (b in [ibend,iberror]) or ((b=untilb) and (entry.id=mainentryid));
skipuntilentry:=(b=untilb);
end;
{*****************************************************************************
TPPUFile Writing
*****************************************************************************}
function tppufile.createfile:boolean;
begin
createfile:=false;
{$ifdef INTFPPU}
if crc_only then
begin
fname:=fname+'.intf';
crc_only:=false;
end;
{$endif}
if not crc_only then
begin
assign(f,fname);
{$I-}
rewrite(f,1);
{$I+}
if ioresult<>0 then
exit;
Mode:=2;
{write header for sure}
blockwrite(f,header,sizeof(tppuheader));
end;
bufsize:=ppubufsize;
bufstart:=sizeof(tppuheader);
bufidx:=0;
{reset}
crc:=cardinal($ffffffff);
interface_crc:=cardinal($ffffffff);
do_interface_crc:=true;
Error:=false;
do_crc:=true;
size:=0;
entrytyp:=mainentryid;
{start}
NewEntry;
createfile:=true;
end;
procedure tppufile.writeheader;
var
opos : integer;
begin
if crc_only then
exit;
{ flush buffer }
writebuf;
{ update size (w/o header!) in the header }
header.size:=bufstart-sizeof(tppuheader);
{ set the endian flag }
{$ifndef FPC_BIG_ENDIAN}
header.flags := header.flags or uf_little_endian;
{$else not FPC_BIG_ENDIAN}
header.flags := header.flags or uf_big_endian;
{ Now swap the header in the correct endian (always little endian) }
header.compiler := SwapWord(header.compiler);
header.cpu := SwapWord(header.cpu);
header.target := SwapWord(header.target);
header.flags := SwapLong(header.flags);
header.size := SwapLong(header.size);
header.checksum := cardinal(SwapLong(longint(header.checksum)));
header.interface_checksum := cardinal(SwapLong(longint(header.interface_checksum)));
{$endif not FPC_BIG_ENDIAN}
{ write header and restore filepos after it }
opos:=filepos(f);
seek(f,0);
blockwrite(f,header,sizeof(tppuheader));
seek(f,opos);
end;
procedure tppufile.writebuf;
begin
if not crc_only then
blockwrite(f,buf^,bufidx);
inc(bufstart,bufidx);
bufidx:=0;
end;
procedure tppufile.writedata(const b;len:integer);
var
p : pchar;
left,
idx : integer;
begin
if crc_only then
exit;
p:=pchar(@b);
idx:=0;
while len>0 do
begin
left:=bufsize-bufidx;
if len>left then
begin
move(p[idx],buf[bufidx],left);
dec(len,left);
inc(idx,left);
inc(bufidx,left);
writebuf;
end
else
begin
move(p[idx],buf[bufidx],len);
inc(bufidx,len);
exit;
end;
end;
end;
procedure tppufile.NewEntry;
begin
with entry do
begin
id:=entrytyp;
nr:=ibend;
size:=0;
end;
{Reset Entry State}
entryidx:=0;
entrybufstart:=bufstart;
entrystart:=bufstart+bufidx;
{Alloc in buffer}
writedata(entry,sizeof(tppuentry));
end;
procedure tppufile.writeentry(ibnr:byte);
var
opos : integer;
begin
{create entry}
entry.id:=entrytyp;
entry.nr:=ibnr;
entry.size:=entryidx;
{it's already been sent to disk ?}
if entrybufstart<>bufstart then
begin
if not crc_only then
begin
{flush to be sure}
WriteBuf;
{write entry}
opos:=filepos(f);
seek(f,entrystart);
blockwrite(f,entry,sizeof(tppuentry));
seek(f,opos);
end;
entrybufstart:=bufstart;
end
else
move(entry,buf[entrystart-bufstart],sizeof(entry));
{Add New Entry, which is ibend by default}
entrystart:=bufstart+bufidx; {next entry position}
NewEntry;
end;
procedure tppufile.putdata(const b;len:integer);
begin
if do_crc then
begin
crc:=UpdateCrc32(crc,b,len);
{$ifdef Test_Double_checksum}
if crc_only then
begin
crc_test2^[crc_index2]:=crc;
{$ifdef Test_Double_checksum_write}
Writeln(CRCFile,crc);
{$endif Test_Double_checksum_write}
if crc_index2<crc_array_size then
inc(crc_index2);
end
else
begin
if (crcindex2<crc_array_size) and (crcindex2<crc_index2) and
(crc_test2^[crcindex2]<>crc) then
Do_comment(V_Note,'impl CRC changed');
{$ifdef Test_Double_checksum_write}
Writeln(CRCFile,crc);
{$endif Test_Double_checksum_write}
inc(crcindex2);
end;
{$endif def Test_Double_checksum}
if do_interface_crc then
begin
interface_crc:=UpdateCrc32(interface_crc,b,len);
{$ifdef Test_Double_checksum}
if crc_only then
begin
crc_test^[crc_index]:=interface_crc;
{$ifdef Test_Double_checksum_write}
Writeln(CRCFile,interface_crc);
{$endif Test_Double_checksum_write}
if crc_index<crc_array_size then
inc(crc_index);
end
else
begin
if (crcindex<crc_array_size) and (crcindex<crc_index) and
(crc_test^[crcindex]<>interface_crc) then
Do_comment(V_Warning,'CRC changed');
{$ifdef Test_Double_checksum_write}
Writeln(CRCFile,interface_crc);
{$endif Test_Double_checksum_write}
inc(crcindex);
end;
{$endif def Test_Double_checksum}
end;
end;
if not crc_only then
writedata(b,len);
inc(entryidx,len);
end;
procedure tppufile.putbyte(b:byte);
begin
putdata(b,1);
end;
procedure tppufile.putword(w:word);
begin
putdata(w,2);
end;
procedure tppufile.putlongint(l:longint);
begin
putdata(l,4);
end;
procedure tppufile.putreal(d:ppureal);
begin
putdata(d,sizeof(ppureal));
end;
procedure tppufile.putstring(s:string);
begin
putdata(s,length(s)+1);
end;
procedure tppufile.putsmallset(const b);
var
l : longint;
begin
l:=longint(b);
putlongint(l);
end;
procedure tppufile.putnormalset(const b);
type
SetLongintArray = Array [0..7] of longint;
var
i : longint;
tempb : setlongintarray;
begin
if change_endian then
begin
for i:=0 to 7 do
tempb[i]:=SwapLong(SetLongintArray(b)[i]);
putdata(tempb,32);
end
else
putdata(b,32);
end;
procedure tppufile.tempclose;
begin
if not closed then
begin
closepos:=filepos(f);
{$I-}
system.close(f);
{$I+}
if ioresult<>0 then;
closed:=true;
tempclosed:=true;
end;
end;
function tppufile.tempopen:boolean;
var
ofm : byte;
begin
tempopen:=false;
if not closed or not tempclosed then
exit;
ofm:=filemode;
filemode:=0;
{$I-}
reset(f,1);
{$I+}
filemode:=ofm;
if ioresult<>0 then
exit;
closed:=false;
tempclosed:=false;
{ restore state }
seek(f,closepos);
tempopen:=true;
end;
end.
{
$Log: ppu.pas,v $
Revision 1.44 2003/11/10 22:02:52 peter
* cross unit inlining fixed
Revision 1.43 2003/10/22 20:40:00 peter
* write derefdata in a separate ppu entry
Revision 1.42 2003/09/23 17:56:05 peter
* locals and paras are allocated in the code generation
* tvarsym.localloc contains the location of para/local when
generating code for the current procedure
Revision 1.41 2003/07/05 20:06:28 jonas
* fixed some range check errors that occurred on big endian systems
* slightly optimized the swap*() functions
Revision 1.40 2003/06/17 16:34:44 jonas
* lots of newra fixes (need getfuncretparaloc implementation for i386)!
* renamed all_intregisters to volatile_intregisters and made it
processor dependent
Revision 1.39 2003/06/07 20:26:32 peter
* re-resolving added instead of reloading from ppu
* tderef object added to store deref info for resolving
Revision 1.38 2003/05/26 19:39:51 peter
* removed systems unit
Revision 1.37 2003/05/26 15:49:54 jonas
* endian fix is now done using a define instead of with source_info
Revision 1.36 2003/05/24 13:37:10 jonas
* endian fixes
Revision 1.35 2003/05/23 17:03:51 peter
* write header for crc_only
Revision 1.34 2003/04/25 20:59:34 peter
* removed funcretn,funcretsym, function result is now in varsym
and aliases for result and function name are added using absolutesym
* vs_hidden parameter for funcret passed in parameter
* vs_hidden fixes
* writenode changed to printnode and released from extdebug
* -vp option added to generate a tree.log with the nodetree
* nicer printnode for statements, callnode
Revision 1.33 2003/04/24 13:03:01 florian
* comp is now written with its bit pattern to the ppu instead as an extended
Revision 1.32 2003/04/23 14:42:07 daniel
* Further register allocator work. Compiler now smaller with new
allocator than without.
* Somebody forgot to adjust ppu version number
Revision 1.31 2003/04/10 17:57:53 peter
* vs_hidden released
Revision 1.30 2003/03/17 15:54:22 peter
* store symoptions also for procdef
* check symoptions (private,public) when calculating possible
overload candidates
Revision 1.29 2003/01/08 18:43:56 daniel
* Tregister changed into a record
Revision 1.28 2002/11/15 01:58:53 peter
* merged changes from 1.0.7 up to 04-11
- -V option for generating bug report tracing
- more tracing for option parsing
- errors for cdecl and high()
- win32 import stabs
- win32 records<=8 are returned in eax:edx (turned off by default)
- heaptrc update
- more info for temp management in .s file with EXTDEBUG
Revision 1.27 2002/10/14 19:42:33 peter
* only use init tables for threadvars
Revision 1.26 2002/08/18 20:06:25 peter
* inlining is now also allowed in interface
* renamed write/load to ppuwrite/ppuload
* tnode storing in ppu
* nld,ncon,nbas are already updated for storing in ppu
Revision 1.25 2002/08/15 19:10:35 peter
* first things tai,tnode storing in ppu
Revision 1.24 2002/08/15 15:09:42 carl
+ fpu emulation helpers (ppu checking also)
Revision 1.23 2002/08/13 21:40:56 florian
* more fixes for ppc calling conventions
Revision 1.22 2002/08/11 13:24:12 peter
* saving of asmsymbols in ppu supported
* asmsymbollist global is removed and moved into a new class
tasmlibrarydata that will hold the info of a .a file which
corresponds with a single module. Added librarydata to tmodule
to keep the library info stored for the module. In the future the
objectfiles will also be stored to the tasmlibrarydata class
* all getlabel/newasmsymbol and friends are moved to the new class
Revision 1.21 2002/08/09 07:33:02 florian
* a couple of interface related fixes
Revision 1.20 2002/05/18 13:34:13 peter
* readded missing revisions
Revision 1.19 2002/05/16 19:46:44 carl
+ defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
+ try to fix temp allocation (still in ifdef)
+ generic constructor calls
+ start of tassembler / tmodulebase class cleanup
Revision 1.17 2002/04/04 19:06:03 peter
* removed unused units
* use tlocation.size in cg.a_*loc*() routines
Revision 1.16 2002/03/31 20:26:36 jonas
+ a_loadfpu_* and a_loadmm_* methods in tcg
* register allocation is now handled by a class and is mostly processor
independent (+rgobj.pas and i386/rgcpu.pas)
* temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
* some small improvements and fixes to the optimizer
* some register allocation fixes
* some fpuvaroffset fixes in the unary minus node
* push/popusedregisters is now called rg.save/restoreusedregisters and
(for i386) uses temps instead of push/pop's when using -Op3 (that code is
also better optimizable)
* fixed and optimized register saving/restoring for new/dispose nodes
* LOC_FPU locations now also require their "register" field to be set to
R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
- list field removed of the tnode class because it's not used currently
and can cause hard-to-find bugs
Revision 1.15 2002/03/28 16:07:52 armin
+ initialize threadvars defined local in units
}
syntax highlighted by Code2HTML, v. 0.9.1