{
$Id: rgcpu.pas,v 1.41 2003/12/24 00:10:02 florian Exp $
Copyright (c) 1998-2002 by Florian Klaempfl
This unit implements the i386 specific class for the register
allocator
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit rgcpu;
{$i fpcdefs.inc}
interface
uses
cpubase,
cpuinfo,
aasmbase,aasmtai,
cclasses,globtype,cgbase,rgobj,rgx86;
type
trgcpu = class(trgobj)
procedure add_constraints(reg:Tregister);override;
end;
implementation
uses
systems,
verbose;
const
{ This value is used in tsaved. If the array value is equal
to this, then this means that this register is not used.}
reg_not_saved = $7fffffff;
{************************************************************************
trgcpu
*************************************************************************}
procedure trgcpu.add_constraints(reg:Tregister);
var
supreg : tsuperregister;
begin
if getsubreg(reg) in [R_SUBL,R_SUBH] then
begin
supreg:=getsupreg(reg);
{These registers have no 8-bit subregister, so add interferences.}
add_edge(supreg,RS_ESI);
add_edge(supreg,RS_EDI);
add_edge(supreg,RS_EBP);
end;
end;
end.
{
$Log: rgcpu.pas,v $
Revision 1.41 2003/12/24 00:10:02 florian
- delete parameter in cg64 methods removed
Revision 1.40 2003/10/17 15:08:34 peter
* commented out more obsolete constants
Revision 1.39 2003/10/17 14:38:32 peter
* 64k registers supported
* fixed some memory leaks
Revision 1.38 2003/10/10 17:48:14 peter
* old trgobj moved to x86/rgcpu and renamed to trgx86fpu
* tregisteralloctor renamed to trgobj
* removed rgobj from a lot of units
* moved location_* and reference_* to cgobj
* first things for mmx register allocation
Revision 1.37 2003/10/09 21:31:37 daniel
* Register allocator splitted, ans abstract now
Revision 1.36 2003/10/01 20:34:49 peter
* procinfo unit contains tprocinfo
* cginfo renamed to cgbase
* moved cgmessage to verbose
* fixed ppc and sparc compiles
Revision 1.35 2003/09/11 11:55:00 florian
* improved arm code generation
* move some protected and private field around
* the temp. register for register parameters/arguments are now released
before the move to the parameter register is done. This improves
the code in a lot of cases.
Revision 1.34 2003/09/09 20:59:27 daniel
* Adding register allocation order
Revision 1.33 2003/09/07 22:09:35 peter
* preparations for different default calling conventions
* various RA fixes
Revision 1.32 2003/09/03 15:55:01 peter
* NEWRA branch merged
Revision 1.31.2.3 2003/08/31 13:50:16 daniel
* Remove sorting and use pregenerated indexes
* Some work on making things compile
Revision 1.31.2.2 2003/08/28 18:35:08 peter
* tregister changed to cardinal
Revision 1.31.2.1 2003/08/27 19:55:54 peter
* first tregister patch
Revision 1.31 2003/08/20 09:07:00 daniel
* New register coding now mandatory, some more convert_registers calls
removed.
Revision 1.30 2003/08/17 08:48:02 daniel
* Another register allocator bug fixed.
* cpu_registers set to 6 for i386
Revision 1.29 2003/06/17 16:51:30 peter
* cycle fixes
Revision 1.28 2003/06/17 16:34:44 jonas
* lots of newra fixes (need getfuncretparaloc implementation for i386)!
* renamed all_intregisters to volatile_intregisters and made it
processor dependent
Revision 1.27 2003/06/13 21:19:31 peter
* current_procdef removed, use current_procinfo.procdef instead
Revision 1.26 2003/06/12 21:12:20 peter
* size para for ungetregisterfpu
Revision 1.25 2003/06/03 21:11:09 peter
* cg.a_load_* get a from and to size specifier
* makeregsize only accepts newregister
* i386 uses generic tcgnotnode,tcgunaryminus
Revision 1.24 2003/06/03 13:01:59 daniel
* Register allocator finished
Revision 1.23 2003/06/01 21:38:06 peter
* getregisterfpu size parameter added
* op_const_reg size parameter added
* sparc updates
Revision 1.22 2003/05/16 14:33:31 peter
* regvar fixes
Revision 1.21 2003/04/25 08:25:26 daniel
* Ifdefs around a lot of calls to cleartempgen
* Fixed registers that are allocated but not freed in several nodes
* Tweak to register allocator to cause less spills
* 8-bit registers now interfere with esi,edi and ebp
Compiler can now compile rtl successfully when using new register
allocator
Revision 1.20 2003/04/23 14:42:08 daniel
* Further register allocator work. Compiler now smaller with new
allocator than without.
* Somebody forgot to adjust ppu version number
Revision 1.19 2003/04/22 10:09:35 daniel
+ Implemented the actual register allocator
+ Scratch registers unavailable when new register allocator used
+ maybe_save/maybe_restore unavailable when new register allocator used
Revision 1.18 2003/04/21 19:16:50 peter
* count address regs separate
Revision 1.17 2003/03/28 19:16:57 peter
* generic constructor working for i386
* remove fixed self register
* esi added as address register for i386
Revision 1.16 2003/03/17 15:52:57 peter
* SUPPORT_MMX define compile fix
Revision 1.15 2003/03/08 13:59:17 daniel
* Work to handle new register notation in ag386nsm
+ Added newra version of Ti386moddivnode
Revision 1.14 2003/03/08 08:59:07 daniel
+ $define newra will enable new register allocator
+ getregisterint will return imaginary registers with $newra
+ -sr switch added, will skip register allocation so you can see
the direct output of the code generator before register allocation
Revision 1.13 2003/03/07 21:57:53 daniel
* Improved getregisterint
Revision 1.12 2003/02/19 22:00:16 daniel
* Code generator converted to new register notation
- Horribily outdated todo.txt removed
Revision 1.11 2003/01/08 18:43:57 daniel
* Tregister changed into a record
Revision 1.10 2002/10/05 12:43:29 carl
* fixes for Delphi 6 compilation
(warning : Some features do not work under Delphi)
Revision 1.9 2002/08/17 09:23:48 florian
* first part of procinfo rewrite
Revision 1.8 2002/07/01 18:46:34 peter
* internal linker
* reorganized aasm layer
Revision 1.7 2002/05/16 19:46:52 carl
+ defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
+ try to fix temp allocation (still in ifdef)
+ generic constructor calls
+ start of tassembler / tmodulebase class cleanup
Revision 1.6 2002/05/12 16:53:18 peter
* moved entry and exitcode to ncgutil and cgobj
* foreach gets extra argument for passing local data to the
iterator function
* -CR checks also class typecasts at runtime by changing them
into as
* fixed compiler to cycle with the -CR option
* fixed stabs with elf writer, finally the global variables can
be watched
* removed a lot of routines from cga unit and replaced them by
calls to cgobj
* u32bit-s32bit updates for and,or,xor nodes. When one element is
u32bit then the other is typecasted also to u32bit without giving
a rangecheck warning/error.
* fixed pascal calling method with reversing also the high tree in
the parast, detected by tcalcst3 test
Revision 1.5 2002/04/21 15:43:32 carl
* changeregsize -> rg.makeregsize
* changeregsize moved from cpubase to here
Revision 1.4 2002/04/15 19:44:22 peter
* fixed stackcheck that would be called recursively when a stack
error was found
* generic changeregsize(reg,size) for i386 register resizing
* removed some more routines from cga unit
* fixed returnvalue handling
* fixed default stacksize of linux and go32v2, 8kb was a bit small :-)
Revision 1.3 2002/04/04 19:06:13 peter
* removed unused units
* use tlocation.size in cg.a_*loc*() routines
Revision 1.2 2002/04/02 17:11:39 peter
* tlocation,treference update
* LOC_CONSTANT added for better constant handling
* secondadd splitted in multiple routines
* location_force_reg added for loading a location to a register
of a specified size
* secondassignment parses now first the right and then the left node
(this is compatible with Kylix). This saves a lot of push/pop especially
with string operations
* adapted some routines to use the new cg methods
Revision 1.1 2002/03/31 20:26:40 jonas
+ a_loadfpu_* and a_loadmm_* methods in tcg
* register allocation is now handled by a class and is mostly processor
independent (+rgobj.pas and i386/rgcpu.pas)
* temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
* some small improvements and fixes to the optimizer
* some register allocation fixes
* some fpuvaroffset fixes in the unary minus node
* push/popusedregisters is now called rg.save/restoreusedregisters and
(for i386) uses temps instead of push/pop's when using -Op3 (that code is
also better optimizable)
* fixed and optimized register saving/restoring for new/dispose nodes
* LOC_FPU locations now also require their "register" field to be set to
R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
- list field removed of the tnode class because it's not used currently
and can cause hard-to-find bugs
}
syntax highlighted by Code2HTML, v. 0.9.1