{
$Id: ra386att.pas,v 1.58 2003/11/12 16:05:39 florian Exp $
Copyright (c) 1998-2002 by Carl Eric Codere and Peter Vreman
Does the parsing for the i386 GNU AS styled inline assembler.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
Unit ra386att;
{$i fpcdefs.inc}
Interface
uses
cpubase,
raatt,rax86;
type
ti386attreader = class(tattreader)
ActOpsize : topsize;
function is_asmopcode(const s: string):boolean;override;
procedure handleopcode;override;
procedure BuildReference(oper : t386operand);
procedure BuildOperand(oper : t386operand);
procedure BuildOpCode(instr : t386instruction);
procedure handlepercent;override;
end;
Implementation
uses
{ helpers }
cutils,
{ global }
globtype,globals,verbose,
systems,
{ aasm }
cpuinfo,aasmbase,aasmtai,aasmcpu,
{ symtable }
symconst,symbase,symtype,symsym,symtable,
{ parser }
scanner,
procinfo,
itcpugas,
rabase,rautils,
cgbase,cgobj
;
procedure ti386attreader.handlepercent;
var
len : longint;
begin
len:=1;
actasmpattern[len]:='%';
c:=current_scanner.asmgetchar;
{ to be a register there must be a letter and not a number }
if c in ['0'..'9'] then
begin
actasmtoken:=AS_MOD;
end
else
begin
while c in ['a'..'z','A'..'Z','0'..'9'] do
Begin
inc(len);
actasmpattern[len]:=c;
c:=current_scanner.asmgetchar;
end;
actasmpattern[0]:=chr(len);
uppervar(actasmpattern);
if (actasmpattern = '%ST') and (c='(') then
Begin
actasmpattern:=actasmpattern+c;
c:=current_scanner.asmgetchar;
if c in ['0'..'9'] then
actasmpattern:=actasmpattern + c
else
Message(asmr_e_invalid_fpu_register);
c:=current_scanner.asmgetchar;
if c <> ')' then
Message(asmr_e_invalid_fpu_register)
else
Begin
actasmpattern:=actasmpattern + c;
c:=current_scanner.asmgetchar; { let us point to next character. }
end;
end;
if is_register(actasmpattern) then
exit;
Message(asmr_e_invalid_register);
actasmtoken:=raatt.AS_NONE;
end;
end;
Procedure ti386attreader.BuildReference(oper : t386operand);
procedure Consume_RParen;
begin
if actasmtoken <> AS_RPAREN then
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(true);
end
else
begin
Consume(AS_RPAREN);
if not (actasmtoken in [AS_COMMA,AS_SEPARATOR,AS_END]) then
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(true);
end;
end;
end;
procedure Consume_Scale;
var
l : longint;
begin
{ we have to process the scaling }
l:=BuildConstExpression(false,true);
if ((l = 2) or (l = 4) or (l = 8) or (l = 1)) then
oper.opr.ref.scalefactor:=l
else
Begin
Message(asmr_e_wrong_scale_factor);
oper.opr.ref.scalefactor:=0;
end;
end;
begin
oper.InitRef;
Consume(AS_LPAREN);
Case actasmtoken of
AS_INTNUM,
AS_MINUS,
AS_PLUS: { absolute offset, such as fs:(0x046c) }
Begin
{ offset(offset) is invalid }
If oper.opr.Ref.Offset <> 0 Then
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(true);
End
Else
Begin
oper.opr.Ref.Offset:=BuildConstExpression(false,true);
Consume_RParen;
end;
exit;
End;
AS_REGISTER: { (reg ... }
Begin
{ Check if there is already a base (mostly ebp,esp) than this is
not allowed, because it will give crashing code }
if ((oper.opr.typ=OPR_REFERENCE) and (oper.opr.ref.base<>NR_NO)) or
((oper.opr.typ=OPR_LOCAL) and (oper.opr.localsym.localloc.loc<>LOC_REGISTER)) then
message(asmr_e_cannot_index_relative_var);
oper.opr.ref.base:=actasmregister;
Consume(AS_REGISTER);
{ can either be a register or a right parenthesis }
{ (reg) }
if actasmtoken=AS_RPAREN then
Begin
Consume_RParen;
exit;
end;
{ (reg,reg .. }
Consume(AS_COMMA);
if actasmtoken=AS_REGISTER then
Begin
oper.opr.ref.index:=actasmregister;
Consume(AS_REGISTER);
{ check for scaling ... }
case actasmtoken of
AS_RPAREN:
Begin
Consume_RParen;
exit;
end;
AS_COMMA:
Begin
Consume(AS_COMMA);
Consume_Scale;
Consume_RParen;
end;
else
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(false);
end;
end; { end case }
end
else
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(false);
end;
end; {end case }
AS_COMMA: { (, ... can either be scaling, or index }
Begin
Consume(AS_COMMA);
{ Index }
if (actasmtoken=AS_REGISTER) then
Begin
oper.opr.ref.index:=actasmregister;
Consume(AS_REGISTER);
{ check for scaling ... }
case actasmtoken of
AS_RPAREN:
Begin
Consume_RParen;
exit;
end;
AS_COMMA:
Begin
Consume(AS_COMMA);
Consume_Scale;
Consume_RParen;
end;
else
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(false);
end;
end; {end case }
end
{ Scaling }
else
Begin
Consume_Scale;
Consume_RParen;
exit;
end;
end;
else
Begin
Message(asmr_e_invalid_reference_syntax);
RecoverConsume(false);
end;
end;
end;
Procedure ti386attreader.BuildOperand(oper : t386operand);
var
tempstr,
expr : string;
typesize,
l,k : longint;
procedure AddLabelOperand(hl:tasmlabel);
begin
if not(actasmtoken in [AS_PLUS,AS_MINUS,AS_LPAREN]) and
is_calljmp(actopcode) then
begin
oper.opr.typ:=OPR_SYMBOL;
oper.opr.symbol:=hl;
end
else
begin
oper.InitRef;
oper.opr.ref.symbol:=hl;
end;
end;
procedure MaybeRecordOffset;
var
hasdot : boolean;
l,
toffset,
tsize : longint;
begin
if not(actasmtoken in [AS_DOT,AS_PLUS,AS_MINUS]) then
exit;
l:=0;
hasdot:=(actasmtoken=AS_DOT);
if hasdot then
begin
if expr<>'' then
begin
BuildRecordOffsetSize(expr,toffset,tsize);
inc(l,toffset);
oper.SetSize(tsize,true);
end;
end;
if actasmtoken in [AS_PLUS,AS_MINUS] then
inc(l,BuildConstExpression(true,false));
case oper.opr.typ of
OPR_LOCAL :
begin
{ don't allow direct access to fields of parameters, because that
will generate buggy code. Allow it only for explicit typecasting }
if hasdot and
(not oper.hastype) and
(tvarsym(oper.opr.localsym).owner.symtabletype=parasymtable) and
(current_procinfo.procdef.proccalloption<>pocall_register) then
Message(asmr_e_cannot_access_field_directly_for_parameters);
inc(oper.opr.localsymofs,l)
end;
OPR_CONSTANT :
inc(oper.opr.val,l);
OPR_REFERENCE :
inc(oper.opr.ref.offset,l);
else
internalerror(200309221);
end;
end;
function MaybeBuildReference:boolean;
{ Try to create a reference, if not a reference is found then false
is returned }
begin
MaybeBuildReference:=true;
case actasmtoken of
AS_INTNUM,
AS_MINUS,
AS_PLUS:
Begin
oper.opr.ref.offset:=BuildConstExpression(True,False);
if actasmtoken<>AS_LPAREN then
Message(asmr_e_invalid_reference_syntax)
else
BuildReference(oper);
end;
AS_LPAREN:
BuildReference(oper);
AS_ID: { only a variable is allowed ... }
Begin
tempstr:=actasmpattern;
Consume(AS_ID);
{ typecasting? }
if (actasmtoken=AS_LPAREN) and
SearchType(tempstr,typesize) then
begin
oper.hastype:=true;
Consume(AS_LPAREN);
BuildOperand(oper);
Consume(AS_RPAREN);
if oper.opr.typ in [OPR_REFERENCE,OPR_LOCAL] then
oper.SetSize(typesize,true);
end
else
if not oper.SetupVar(tempstr,false) then
Message1(sym_e_unknown_id,tempstr);
{ record.field ? }
if actasmtoken=AS_DOT then
begin
BuildRecordOffsetSize(tempstr,l,k);
inc(oper.opr.ref.offset,l);
end;
case actasmtoken of
AS_END,
AS_SEPARATOR,
AS_COMMA: ;
AS_LPAREN:
BuildReference(oper);
else
Begin
Message(asmr_e_invalid_reference_syntax);
Consume(actasmtoken);
end;
end; {end case }
end;
else
MaybeBuildReference:=false;
end; { end case }
end;
const
regsize_2_size: array[S_B..S_L] of longint = (1,2,4);
var
tempreg : tregister;
hl : tasmlabel;
Begin
expr:='';
case actasmtoken of
AS_LPAREN: { Memory reference or constant expression }
Begin
oper.InitRef;
BuildReference(oper);
end;
AS_DOLLAR: { Constant expression }
Begin
Consume(AS_DOLLAR);
BuildConstantOperand(oper);
end;
AS_INTNUM,
AS_MINUS,
AS_PLUS:
Begin
{ Constant memory offset }
{ This must absolutely be followed by ( }
oper.InitRef;
oper.opr.ref.offset:=BuildConstExpression(True,False);
if actasmtoken<>AS_LPAREN then
Message(asmr_e_invalid_reference_syntax)
else
BuildReference(oper);
end;
AS_STAR: { Call from memory address }
Begin
Consume(AS_STAR);
if actasmtoken=AS_REGISTER then
begin
oper.opr.typ:=OPR_REGISTER;
oper.opr.reg:=actasmregister;
oper.SetSize(regsize_2_size[reg2opsize(actasmregister)],true);
Consume(AS_REGISTER);
end
else
begin
oper.InitRef;
if not MaybeBuildReference then
Message(asmr_e_syn_operand);
end;
{ this is only allowed for call's and jmp's }
if not is_calljmp(actopcode) then
Message(asmr_e_syn_operand);
end;
AS_ID: { A constant expression, or a Variable ref. }
Begin
{ Local Label ? }
if is_locallabel(actasmpattern) then
begin
CreateLocalLabel(actasmpattern,hl,false);
Consume(AS_ID);
AddLabelOperand(hl);
end
else
{ Check for label }
if SearchLabel(actasmpattern,hl,false) then
begin
Consume(AS_ID);
AddLabelOperand(hl);
end
else
{ probably a variable or normal expression }
{ or a procedure (such as in CALL ID) }
Begin
{ is it a constant ? }
if SearchIConstant(actasmpattern,l) then
Begin
if not (oper.opr.typ in [OPR_NONE,OPR_CONSTANT]) then
Message(asmr_e_invalid_operand_type);
BuildConstantOperand(oper);
end
else
begin
expr:=actasmpattern;
Consume(AS_ID);
{ typecasting? }
if (actasmtoken=AS_LPAREN) and
SearchType(expr,typesize) then
begin
oper.hastype:=true;
Consume(AS_LPAREN);
BuildOperand(oper);
Consume(AS_RPAREN);
if oper.opr.typ in [OPR_REFERENCE,OPR_LOCAL] then
oper.SetSize(typesize,true);
end
else
begin
if oper.SetupVar(expr,false) then
begin
end
else
Begin
{ look for special symbols ... }
if expr= '__HIGH' then
begin
consume(AS_LPAREN);
if not oper.setupvar('high'+actasmpattern,false) then
Message1(sym_e_unknown_id,'high'+actasmpattern);
consume(AS_ID);
consume(AS_RPAREN);
end
else
if expr = '__RESULT' then
oper.SetUpResult
else
if expr = '__SELF' then
oper.SetupSelf
else
if expr = '__OLDEBP' then
oper.SetupOldEBP
else
{ check for direct symbolic names }
{ only if compiling the system unit }
if (cs_compilesystem in aktmoduleswitches) then
begin
if not oper.SetupDirectVar(expr) then
Begin
{ not found, finally ... add it anyways ... }
Message1(asmr_w_id_supposed_external,expr);
oper.InitRef;
oper.opr.ref.symbol:=objectlibrary.newasmsymbol(expr);
end;
end
else
Message1(sym_e_unknown_id,expr);
end;
end;
end;
if actasmtoken=AS_DOT then
MaybeRecordOffset;
{ add a constant expression? }
if (actasmtoken=AS_PLUS) then
begin
l:=BuildConstExpression(true,false);
case oper.opr.typ of
OPR_CONSTANT :
inc(oper.opr.val,l);
OPR_LOCAL :
inc(oper.opr.localsymofs,l);
OPR_REFERENCE :
inc(oper.opr.ref.offset,l);
else
internalerror(200309202);
end;
end
end;
{ Do we have a indexing reference, then parse it also }
if actasmtoken=AS_LPAREN then
BuildReference(oper);
end;
AS_REGISTER: { Register, a variable reference or a constant reference }
Begin
{ save the type of register used. }
tempreg:=actasmregister;
Consume(AS_REGISTER);
if actasmtoken = AS_COLON then
Begin
Consume(AS_COLON);
oper.InitRef;
oper.opr.ref.segment:=tempreg;
{ This must absolutely be followed by a reference }
if not MaybeBuildReference then
Begin
Message(asmr_e_invalid_seg_override);
Consume(actasmtoken);
end;
end
{ Simple register }
else if (actasmtoken in [AS_END,AS_SEPARATOR,AS_COMMA]) then
Begin
if not (oper.opr.typ in [OPR_NONE,OPR_REGISTER]) then
Message(asmr_e_invalid_operand_type);
oper.opr.typ:=OPR_REGISTER;
oper.opr.reg:=tempreg;
oper.SetSize(tcgsize2size[cg.reg_cgsize(oper.opr.reg)],true);
end
else
Message(asmr_e_syn_operand);
end;
AS_END,
AS_SEPARATOR,
AS_COMMA: ;
else
Begin
Message(asmr_e_syn_operand);
Consume(actasmtoken);
end;
end; { end case }
end;
procedure ti386attreader.BuildOpCode(instr : t386instruction);
var
operandnum : longint;
PrefixOp,OverrideOp: tasmop;
Begin
PrefixOp:=A_None;
OverrideOp:=A_None;
{ prefix seg opcode / prefix opcode }
repeat
if is_prefix(actopcode) then
begin
PrefixOp:=ActOpcode;
with instr do
begin
opcode:=ActOpcode;
condition:=ActCondition;
opsize:=ActOpsize;
ConcatInstruction(curlist);
end;
Consume(AS_OPCODE);
end
else
if is_override(actopcode) then
begin
OverrideOp:=ActOpcode;
with instr do
begin
opcode:=ActOpcode;
condition:=ActCondition;
opsize:=ActOpsize;
ConcatInstruction(curlist);
end;
Consume(AS_OPCODE);
end
else
break;
{ allow for newline as in gas styled syntax }
while actasmtoken=AS_SEPARATOR do
Consume(AS_SEPARATOR);
until (actasmtoken<>AS_OPCODE);
{ opcode }
if (actasmtoken<>AS_OPCODE) then
Begin
Message(asmr_e_invalid_or_missing_opcode);
RecoverConsume(true);
exit;
end;
{ Fill the instr object with the current state }
with instr do
begin
Opcode:=ActOpcode;
condition:=ActCondition;
opsize:=ActOpsize;
end;
{ Valid combination of prefix/override and instruction ? }
if (prefixop<>A_NONE) and (NOT CheckPrefix(PrefixOp,actopcode)) then
Message1(asmr_e_invalid_prefix_and_opcode,actasmpattern);
if (overrideop<>A_NONE) and (NOT CheckOverride(OverrideOp,ActOpcode)) then
Message1(asmr_e_invalid_override_and_opcode,actasmpattern);
{ We are reading operands, so opcode will be an AS_ID }
operandnum:=1;
Consume(AS_OPCODE);
{ Zero operand opcode ? }
if actasmtoken in [AS_SEPARATOR,AS_END] then
begin
operandnum:=0;
exit;
end;
{ Read the operands }
repeat
case actasmtoken of
AS_COMMA: { Operand delimiter }
Begin
if operandnum > Max_Operands then
Message(asmr_e_too_many_operands)
else
Inc(operandnum);
Consume(AS_COMMA);
end;
AS_SEPARATOR,
AS_END : { End of asm operands for this opcode }
begin
break;
end;
else
BuildOperand(instr.Operands[operandnum] as t386operand);
end; { end case }
until false;
instr.Ops:=operandnum;
end;
function ti386attreader.is_asmopcode(const s: string):boolean;
const
{ We need first to check the long prefixes, else we get probs
with things like movsbl }
att_sizesuffixstr : array[0..9] of string[2] = (
'','BW','BL','WL','B','W','L','S','Q','T'
);
att_sizesuffix : array[0..9] of topsize = (
S_NO,S_BW,S_BL,S_WL,S_B,S_W,S_L,S_FS,S_IQ,S_FX
);
att_sizefpusuffix : array[0..9] of topsize = (
S_NO,S_NO,S_NO,S_NO,S_NO,S_NO,S_FL,S_FS,S_IQ,S_FX
);
att_sizefpuintsuffix : array[0..9] of topsize = (
S_NO,S_NO,S_NO,S_NO,S_NO,S_NO,S_IL,S_IS,S_IQ,S_NO
);
var
str2opentry: tstr2opentry;
cond : string[4];
cnd : tasmcond;
len,
j,
sufidx : longint;
Begin
is_asmopcode:=FALSE;
actopcode:=A_None;
actcondition:=C_None;
actopsize:=S_NO;
{ search for all possible suffixes }
for sufidx:=low(att_sizesuffixstr) to high(att_sizesuffixstr) do
begin
len:=length(s)-length(att_sizesuffixstr[sufidx]);
if copy(s,len+1,length(att_sizesuffixstr[sufidx]))=att_sizesuffixstr[sufidx] then
begin
{ here we search the entire table... }
str2opentry:=nil;
if {(length(s)>0) and} (len>0) then
str2opentry:=tstr2opentry(iasmops.search(copy(s,1,len)));
if assigned(str2opentry) then
begin
actopcode:=str2opentry.op;
if gas_needsuffix[actopcode]=attsufFPU then
actopsize:=att_sizefpusuffix[sufidx]
else if gas_needsuffix[actopcode]=attsufFPUint then
actopsize:=att_sizefpuintsuffix[sufidx]
else
actopsize:=att_sizesuffix[sufidx];
actasmtoken:=AS_OPCODE;
is_asmopcode:=TRUE;
exit;
end;
{ not found, check condition opcodes }
j:=0;
while (j<CondAsmOps) do
begin
if Copy(s,1,Length(CondAsmOpStr[j]))=CondAsmOpStr[j] then
begin
cond:=Copy(s,Length(CondAsmOpStr[j])+1,len-Length(CondAsmOpStr[j]));
if cond<>'' then
begin
for cnd:=low(TasmCond) to high(TasmCond) do
if Cond=Upper(cond2str[cnd]) then
begin
actopcode:=CondASmOp[j];
if gas_needsuffix[actopcode]=attsufFPU then
actopsize:=att_sizefpusuffix[sufidx]
else if gas_needsuffix[actopcode]=attsufFPUint then
actopsize:=att_sizefpuintsuffix[sufidx]
else
actopsize:=att_sizesuffix[sufidx];
actcondition:=cnd;
actasmtoken:=AS_OPCODE;
is_asmopcode:=TRUE;
exit;
end;
end;
end;
inc(j);
end;
end;
end;
end;
procedure ti386attreader.handleopcode;
var
instr : T386Instruction;
begin
instr:=T386Instruction.Create(T386Operand);
instr.OpOrder:=op_att;
BuildOpcode(instr);
instr.AddReferenceSizes;
instr.SetInstructionOpsize;
instr.CheckOperandSizes;
instr.ConcatInstruction(curlist);
instr.Free;
end;
{*****************************************************************************
Initialize
*****************************************************************************}
const
asmmode_i386_att_info : tasmmodeinfo =
(
id : asmmode_i386_att;
idtxt : 'ATT';
casmreader : ti386attreader;
);
initialization
RegisterAsmMode(asmmode_i386_att_info);
end.
{
$Log: ra386att.pas,v $
Revision 1.58 2003/11/12 16:05:39 florian
* assembler readers OOPed
+ typed currency constants
+ typed 128 bit float constants if the CPU supports it
Revision 1.57 2003/11/10 19:08:32 peter
* line numbering is now only done when #10, #10#13 is really parsed
instead of when it is the next character
Revision 1.56 2003/10/29 16:47:18 peter
* fix field offset in reference
Revision 1.55 2003/10/26 13:37:22 florian
* fixed web bug 2128
Revision 1.54 2003/10/24 17:39:03 peter
* more intel parser updates
Revision 1.53 2003/10/23 17:19:44 peter
* typecasting fixes
* reference building more delphi compatible
Revision 1.52 2003/10/20 19:29:35 peter
* fix check for register subscription of reference parameter
Revision 1.51 2003/10/16 21:29:24 peter
+ __HIGH() to retrieve high value
Revision 1.50 2003/10/07 18:21:18 peter
* fix crash
* allow parameter subscription for register parameters
Revision 1.49 2003/10/01 20:34:49 peter
* procinfo unit contains tprocinfo
* cginfo renamed to cgbase
* moved cgmessage to verbose
* fixed ppc and sparc compiles
Revision 1.48 2003/09/23 20:37:53 peter
* fix global var+offset
Revision 1.47 2003/09/23 17:56:06 peter
* locals and paras are allocated in the code generation
* tvarsym.localloc contains the location of para/local when
generating code for the current procedure
Revision 1.46 2003/09/03 15:55:01 peter
* NEWRA branch merged
Revision 1.45.2.2 2003/08/31 15:46:26 peter
* more updates for tregister
Revision 1.45.2.1 2003/08/28 18:35:08 peter
* tregister changed to cardinal
Revision 1.45 2003/05/30 23:57:08 peter
* more sparc cleanup
* accumulator removed, splitted in function_return_reg (called) and
function_result_reg (caller)
Revision 1.44 2003/05/22 21:32:29 peter
* removed some unit dependencies
Revision 1.43 2003/04/30 15:45:35 florian
* merged more x86-64/i386 code
Revision 1.42 2003/04/25 12:04:31 florian
* merged agx64att and ag386att to x86/agx86att
Revision 1.41 2003/04/21 20:05:10 peter
* removed some ie checks
Revision 1.40 2003/03/18 18:15:53 peter
* changed reg2opsize to function
Revision 1.39 2003/02/20 15:52:58 pierre
* fix a range check error
Revision 1.38 2003/02/19 22:00:16 daniel
* Code generator converted to new register notation
- Horribily outdated todo.txt removed
Revision 1.37 2003/02/03 22:47:14 daniel
- Removed reg_2_opsize array
Revision 1.36 2003/01/08 18:43:57 daniel
* Tregister changed into a record
Revision 1.35 2002/12/14 15:02:03 carl
* maxoperands -> max_operands (for portability in rautils.pas)
* fix some range-check errors with loadconst
+ add ncgadd unit to m68k
* some bugfix of a_param_reg with LOC_CREFERENCE
Revision 1.34 2002/12/01 22:08:34 carl
* some small cleanup (remove some specific operators which are not supported)
Revision 1.33 2002/11/30 23:16:39 carl
- removed unused message
Revision 1.32 2002/11/15 01:58:58 peter
* merged changes from 1.0.7 up to 04-11
- -V option for generating bug report tracing
- more tracing for option parsing
- errors for cdecl and high()
- win32 import stabs
- win32 records<=8 are returned in eax:edx (turned off by default)
- heaptrc update
- more info for temp management in .s file with EXTDEBUG
Revision 1.31 2002/09/03 16:26:28 daniel
* Make Tprocdef.defs protected
Revision 1.30 2002/08/13 18:01:52 carl
* rename swatoperands to swapoperands
+ m68k first compilable version (still needs a lot of testing):
assembler generator, system information , inline
assembler reader.
Revision 1.29 2002/08/12 15:08:42 carl
+ stab register indexes for powerpc (moved from gdb to cpubase)
+ tprocessor enumeration moved to cpuinfo
+ linker in target_info is now a class
* many many updates for m68k (will soon start to compile)
- removed some ifdef or correct them for correct cpu
Revision 1.28 2002/08/11 14:32:31 peter
* renamed current_library to objectlibrary
Revision 1.27 2002/08/11 13:24:17 peter
* saving of asmsymbols in ppu supported
* asmsymbollist global is removed and moved into a new class
tasmlibrarydata that will hold the info of a .a file which
corresponds with a single module. Added librarydata to tmodule
to keep the library info stored for the module. In the future the
objectfiles will also be stored to the tasmlibrarydata class
* all getlabel/newasmsymbol and friends are moved to the new class
Revision 1.26 2002/07/26 21:15:44 florian
* rewrote the system handling
Revision 1.25 2002/07/01 18:46:34 peter
* internal linker
* reorganized aasm layer
Revision 1.24 2002/05/18 13:34:25 peter
* readded missing revisions
Revision 1.23 2002/05/16 19:46:52 carl
+ defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
+ try to fix temp allocation (still in ifdef)
+ generic constructor calls
+ start of tassembler / tmodulebase class cleanup
Revision 1.21 2002/04/15 19:12:09 carl
+ target_info.size_of_pointer -> pointer_size
+ some cleanup of unused types/variables
* move several constants from cpubase to their specific units
(where they are used)
+ att_Reg2str -> gas_reg2str
+ int_reg2str -> std_reg2str
Revision 1.20 2002/04/14 17:01:52 carl
+ att_reg2str -> gas_reg2str
Revision 1.19 2002/04/04 19:06:13 peter
* removed unused units
* use tlocation.size in cg.a_*loc*() routines
Revision 1.18 2002/04/02 17:11:39 peter
* tlocation,treference update
* LOC_CONSTANT added for better constant handling
* secondadd splitted in multiple routines
* location_force_reg added for loading a location to a register
of a specified size
* secondassignment parses now first the right and then the left node
(this is compatible with Kylix). This saves a lot of push/pop especially
with string operations
* adapted some routines to use the new cg methods
Revision 1.17 2002/03/28 20:48:25 carl
- remove go32v1 support
Revision 1.16 2002/01/24 18:25:53 peter
* implicit result variable generation for assembler routines
* removed m_tp modeswitch, use m_tp7 or not(m_fpc) instead
}
syntax highlighted by Code2HTML, v. 0.9.1