{
$Id: n386set.pas,v 1.70 2003/11/07 15:58:32 florian Exp $
Copyright (c) 1998-2002 by Florian Klaempfl
Generate i386 assembler for in set/case nodes
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
****************************************************************************
}
unit n386set;
{$i fpcdefs.inc}
interface
uses
node,nset,pass_1,ncgset;
type
ti386innode = class(tinnode)
procedure pass_2;override;
function pass_1 : tnode;override;
end;
ti386casenode = class(tcgcasenode)
procedure optimizevalues(var max_linear_list:longint;var max_dist:cardinal);override;
function has_jumptable : boolean;override;
procedure genjumptable(hp : pcaserecord;min_,max_ : longint);override;
procedure genlinearlist(hp : pcaserecord);override;
end;
implementation
uses
globtype,systems,
verbose,globals,
symconst,symdef,defutil,
aasmbase,aasmtai,aasmcpu,
cgbase,pass_2,
ncon,
cpubase,cpuinfo,procinfo,
cga,cgobj,ncgutil,
cgx86;
{*****************************************************************************
TI386INNODE
*****************************************************************************}
function ti386innode.pass_1 : tnode;
begin
result:=nil;
{ this is the only difference from the generic version }
expectloc:=LOC_FLAGS;
firstpass(right);
firstpass(left);
if codegenerror then
exit;
left_right_max;
{ a smallset needs maybe an misc. register }
if (left.nodetype<>ordconstn) and
not(right.location.loc in [LOC_CREGISTER,LOC_REGISTER]) and
(right.registers32<1) then
inc(registers32);
end;
procedure ti386innode.pass_2;
type
Tsetpart=record
range : boolean; {Part is a range.}
start,stop : byte; {Start/stop when range; Stop=element when an element.}
end;
var
genjumps,
use_small,
ranges : boolean;
hr,hr2,
pleftreg : tregister;
href : treference;
opsize : tcgsize;
setparts : array[1..8] of Tsetpart;
i,numparts : byte;
adjustment : longint;
l,l2 : tasmlabel;
r : Tregister;
{$ifdef CORRECT_SET_IN_FPC}
AM : tasmop;
{$endif CORRECT_SET_IN_FPC}
function analizeset(Aset:pconstset;is_small:boolean):boolean;
var
compares,maxcompares:word;
i:byte;
begin
if tnormalset(Aset^)=[] then
{The expression...
if expr in []
...is allways false. It should be optimized away in the
resulttype pass, and thus never occur here. Since we
do generate wrong code for it, do internalerror.}
internalerror(2002072301);
analizeset:=false;
ranges:=false;
numparts:=0;
compares:=0;
{ Lots of comparisions take a lot of time, so do not allow
too much comparisions. 8 comparisions are, however, still
smalller than emitting the set }
if cs_littlesize in aktglobalswitches then
maxcompares:=8
else
maxcompares:=5;
{ when smallset is possible allow only 3 compares the smallset
code is for littlesize also smaller when more compares are used }
if is_small then
maxcompares:=3;
for i:=0 to 255 do
if i in tnormalset(Aset^) then
begin
if (numparts=0) or (i<>setparts[numparts].stop+1) then
begin
{Set element is a separate element.}
inc(compares);
if compares>maxcompares then
exit;
inc(numparts);
setparts[numparts].range:=false;
setparts[numparts].stop:=i;
end
else
{Set element is part of a range.}
if not setparts[numparts].range then
begin
{Transform an element into a range.}
setparts[numparts].range:=true;
setparts[numparts].start:=setparts[numparts].stop;
setparts[numparts].stop:=i;
ranges := true;
{ there's only one compare per range anymore. Only a }
{ sub is added, but that's much faster than a }
{ cmp/jcc combo so neglect its effect }
{ inc(compares);
if compares>maxcompares then
exit; }
end
else
begin
{Extend a range.}
setparts[numparts].stop:=i;
end;
end;
analizeset:=true;
end;
begin
{ We check first if we can generate jumps, this can be done
because the resulttype.def is already set in firstpass }
{ check if we can use smallset operation using btl which is limited
to 32 bits, the left side may also not contain higher values !! }
use_small:=(tsetdef(right.resulttype.def).settype=smallset) and
((left.resulttype.def.deftype=orddef) and (torddef(left.resulttype.def).high<=32) or
(left.resulttype.def.deftype=enumdef) and (tenumdef(left.resulttype.def).max<=32));
{ Can we generate jumps? Possible for all types of sets }
genjumps:=(right.nodetype=setconstn) and
analizeset(tsetconstnode(right).value_set,use_small);
{ calculate both operators }
{ the complex one first }
firstcomplex(self);
secondpass(left);
{ Only process the right if we are not generating jumps }
if not genjumps then
begin
secondpass(right);
end;
if codegenerror then
exit;
{ ofcourse not commutative }
if nf_swaped in flags then
swapleftright;
if genjumps then
begin
{ It gives us advantage to check for the set elements
separately instead of using the SET_IN_BYTE procedure.
To do: Build in support for LOC_JUMP }
opsize := def_cgsize(left.resulttype.def);
{ If register is used, use only lower 8 bits }
if left.location.loc in [LOC_REGISTER,LOC_CREGISTER] then
begin
{ for ranges we always need a 32bit register, because then we }
{ use the register as base in a reference (JM) }
if ranges then
begin
pleftreg:=cg.makeregsize(left.location.register,OS_INT);
cg.a_load_reg_reg(exprasmlist,left.location.size,OS_INT,left.location.register,pleftreg);
if opsize<>OS_INT then
cg.a_op_const_reg(exprasmlist,OP_AND,OS_INT,255,pleftreg);
opsize:=OS_INT;
end
else
{ otherwise simply use the lower 8 bits (no "and" }
{ necessary this way) (JM) }
begin
pleftreg:=cg.makeregsize(left.location.register,OS_8);
opsize := OS_8;
end;
end
else
begin
{ load the value in a register }
pleftreg:=cg.getintregister(exprasmlist,OS_INT);
opsize:=OS_INT;
cg.a_load_ref_reg(exprasmlist,OS_8,OS_INT,left.location.reference,pleftreg);
location_release(exprasmlist,left.location);
end;
{ Get a label to jump to the end }
location_reset(location,LOC_FLAGS,OS_NO);
{ It's better to use the zero flag when there are
no ranges }
if ranges then
location.resflags:=F_C
else
location.resflags:=F_E;
objectlibrary.getlabel(l);
{ how much have we already substracted from the x in the }
{ "x in [y..z]" expression }
adjustment := 0;
r:=NR_NO;
for i:=1 to numparts do
if setparts[i].range then
{ use fact that a <= x <= b <=> cardinal(x-a) <= cardinal(b-a) }
begin
{ is the range different from all legal values? }
if (setparts[i].stop-setparts[i].start <> 255) then
begin
{ yes, is the lower bound <> 0? }
if (setparts[i].start <> 0) then
{ we're going to substract from the left register, }
{ so in case of a LOC_CREGISTER first move the value }
{ to edi (not done before because now we can do the }
{ move and substract in one instruction with LEA) }
if (left.location.loc = LOC_CREGISTER) then
begin
cg.ungetregister(exprasmlist,pleftreg);
r:=cg.getintregister(exprasmlist,OS_INT);
reference_reset_base(href,pleftreg,-setparts[i].start);
cg.a_loadaddr_ref_reg(exprasmlist,href,r);
{ only now change pleftreg since previous value is }
{ still used in previous instruction }
pleftreg := r;
opsize := OS_32;
end
else
begin
{ otherwise, the value is already in a register }
{ that can be modified }
cg.a_op_const_reg(exprasmlist,OP_SUB,opsize,setparts[i].start-adjustment,pleftreg);
end;
{ new total value substracted from x: }
{ adjustment + (setparts[i].start - adjustment) }
adjustment := setparts[i].start;
{ check if result < b-a+1 (not "result <= b-a", since }
{ we need a carry in case the element is in the range }
{ (this will never overflow since we check at the }
{ beginning whether stop-start <> 255) }
cg.a_cmp_const_reg_label(exprasmlist,opsize,OC_B,setparts[i].stop-setparts[i].start+1,pleftreg,l);
end
else
{ if setparts[i].start = 0 and setparts[i].stop = 255, }
{ it's always true since "in" is only allowed for bytes }
begin
exprasmlist.concat(taicpu.op_none(A_STC,S_NO));
cg.a_jmp_always(exprasmlist,l);
end;
end
else
begin
{ Emit code to check if left is an element }
exprasmlist.concat(taicpu.op_const_reg(A_CMP,TCGSize2OpSize[opsize],setparts[i].stop-adjustment,
pleftreg));
{ Result should be in carry flag when ranges are used }
if ranges then
exprasmlist.concat(taicpu.op_none(A_STC,S_NO));
{ If found, jump to end }
cg.a_jmp_flags(exprasmlist,F_E,l);
end;
if ranges and
{ if the last one was a range, the carry flag is already }
{ set appropriately }
not(setparts[numparts].range) then
exprasmlist.concat(taicpu.op_none(A_CLC,S_NO));
{ To compensate for not doing a second pass }
right.location.reference.symbol:=nil;
{ Now place the end label }
cg.a_label(exprasmlist,l);
cg.ungetregister(exprasmlist,pleftreg);
if r<>NR_NO then
cg.ungetregister(exprasmlist,r);
end
else
begin
location_reset(location,LOC_FLAGS,OS_NO);
{ We will now generated code to check the set itself, no jmps,
handle smallsets separate, because it allows faster checks }
if use_small then
begin
if left.nodetype=ordconstn then
begin
location.resflags:=F_NE;
case right.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
emit_const_reg(A_TEST,S_L,
1 shl (tordconstnode(left).value and 31),right.location.register);
end;
LOC_REFERENCE,
LOC_CREFERENCE :
begin
emit_const_ref(A_TEST,S_L,1 shl (tordconstnode(left).value and 31),
right.location.reference);
end;
else
internalerror(200203312);
end;
location_release(exprasmlist,right.location);
end
else
begin
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
hr:=cg.makeregsize(left.location.register,OS_INT);
cg.a_load_reg_reg(exprasmlist,left.location.size,OS_INT,left.location.register,hr);
end;
else
begin
{ the set element isn't never samller than a byte }
{ and because it's a small set we need only 5 bits }
{ but 8 bits are easier to load }
hr:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_ref_reg(exprasmlist,OS_8,OS_INT,left.location.reference,hr);
location_release(exprasmlist,left.location);
end;
end;
case right.location.loc of
LOC_REGISTER,
LOC_CREGISTER :
begin
emit_reg_reg(A_BT,S_L,hr,
right.location.register);
cg.ungetregister(exprasmlist,right.location.register);
end;
LOC_CONSTANT :
begin
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_const_reg(exprasmlist,OS_INT,right.location.value,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
cg.ungetregister(exprasmlist,hr2);
end;
LOC_CREFERENCE,
LOC_REFERENCE :
begin
location_release(exprasmlist,right.location);
emit_reg_ref(A_BT,S_L,hr,right.location.reference);
end;
else
internalerror(2002032210);
end;
{ simply to indicate EDI is deallocated here too (JM) }
cg.ungetregister(exprasmlist,hr);
location.resflags:=F_C;
end;
end
else
begin
if right.location.loc=LOC_CONSTANT then
begin
location.resflags:=F_C;
objectlibrary.getlabel(l);
objectlibrary.getlabel(l2);
{ load constants to a register }
if left.nodetype=ordconstn then
location_force_reg(exprasmlist,left.location,OS_INT,true);
case left.location.loc of
LOC_REGISTER,
LOC_CREGISTER:
begin
hr:=cg.makeregsize(left.location.register,OS_INT);
cg.a_load_reg_reg(exprasmlist,left.location.size,OS_INT,left.location.register,hr);
cg.a_cmp_const_reg_label(exprasmlist,OS_INT,OC_BE,31,hr,l);
{ reset carry flag }
exprasmlist.concat(taicpu.op_none(A_CLC,S_NO));
cg.a_jmp_always(exprasmlist,l2);
cg.a_label(exprasmlist,l);
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_const_reg(exprasmlist,OS_INT,right.location.value,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
cg.ungetregister(exprasmlist,hr2);
end;
else
begin
{$ifdef CORRECT_SET_IN_FPC}
if m_tp in aktmodeswitches then
begin
{***WARNING only correct if
reference is 32 bits (PM) *****}
emit_const_ref(A_CMP,S_L,31,reference_copy(left.location.reference));
end
else
{$endif CORRECT_SET_IN_FPC}
begin
emit_const_ref(A_CMP,S_B,31,left.location.reference);
end;
cg.a_jmp_flags(exprasmlist,F_BE,l);
{ reset carry flag }
exprasmlist.concat(taicpu.op_none(A_CLC,S_NO));
cg.a_jmp_always(exprasmlist,l2);
cg.a_label(exprasmlist,l);
location_release(exprasmlist,left.location);
hr:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_ref_reg(exprasmlist,OS_INT,OS_INT,left.location.reference,hr);
{ We have to load the value into a register because
btl does not accept values only refs or regs (PFV) }
hr2:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_const_reg(exprasmlist,OS_INT,right.location.value,hr2);
emit_reg_reg(A_BT,S_L,hr,hr2);
cg.ungetregister(exprasmlist,hr2);
end;
end;
cg.a_label(exprasmlist,l2);
end { of right.location.loc=LOC_CONSTANT }
{ do search in a normal set which could have >32 elementsm
but also used if the left side contains higher values > 32 }
else if left.nodetype=ordconstn then
begin
location.resflags:=F_NE;
inc(right.location.reference.offset,tordconstnode(left).value shr 3);
emit_const_ref(A_TEST,S_B,1 shl (tordconstnode(left).value and 7),right.location.reference);
location_release(exprasmlist,right.location);
end
else
begin
if (left.location.loc in [LOC_REGISTER,LOC_CREGISTER]) then
pleftreg:=cg.makeregsize(left.location.register,OS_INT)
else
pleftreg:=cg.getintregister(exprasmlist,OS_INT);
cg.a_load_loc_reg(exprasmlist,OS_INT,left.location,pleftreg);
location_freetemp(exprasmlist,left.location);
location_release(exprasmlist,left.location);
emit_reg_ref(A_BT,S_L,pleftreg,right.location.reference);
cg.ungetregister(exprasmlist,pleftreg);
location_release(exprasmlist,right.location);
{ tg.ungetiftemp(exprasmlist,right.location.reference) happens below }
location.resflags:=F_C;
end;
end;
end;
if not genjumps then
location_freetemp(exprasmlist,right.location);
end;
{*****************************************************************************
TI386CASENODE
*****************************************************************************}
procedure ti386casenode.optimizevalues(var max_linear_list:longint;var max_dist:cardinal);
begin
{ a jump table crashes the pipeline! }
if aktoptprocessor=Class386 then
inc(max_linear_list,3)
else if aktoptprocessor=ClassPentium then
inc(max_linear_list,6)
else if aktoptprocessor in [ClassPentium2,ClassPentium3] then
inc(max_linear_list,9)
else if aktoptprocessor=ClassPentium4 then
inc(max_linear_list,14);
end;
function ti386casenode.has_jumptable : boolean;
begin
has_jumptable:=true;
end;
procedure ti386casenode.genjumptable(hp : pcaserecord;min_,max_ : longint);
var
table : tasmlabel;
last : TConstExprInt;
indexreg : tregister;
href : treference;
jumpsegment : TAAsmOutput;
procedure genitem(t : pcaserecord);
var
i : longint;
begin
if assigned(t^.less) then
genitem(t^.less);
{ fill possible hole }
for i:=last+1 to t^._low-1 do
jumpSegment.concat(Tai_const_symbol.Create(elselabel));
for i:=t^._low to t^._high do
jumpSegment.concat(Tai_const_symbol.Create(t^.statement));
last:=t^._high;
if assigned(t^.greater) then
genitem(t^.greater);
end;
begin
if (cs_create_smart in aktmoduleswitches) then
jumpsegment:=current_procinfo.aktlocaldata
else
jumpsegment:=datasegment;
if not(jumptable_no_range) then
begin
{ case expr less than min_ => goto elselabel }
cg.a_cmp_const_reg_label(exprasmlist,opsize,jmp_lt,aword(min_),hregister,elselabel);
{ case expr greater than max_ => goto elselabel }
cg.a_cmp_const_reg_label(exprasmlist,opsize,jmp_gt,aword(max_),hregister,elselabel);
end;
objectlibrary.getlabel(table);
{ make it a 32bit register }
indexreg:=cg.makeregsize(hregister,OS_INT);
cg.a_load_reg_reg(exprasmlist,opsize,OS_INT,hregister,indexreg);
{ create reference }
reference_reset_symbol(href,table,0);
href.offset:=(-longint(min_))*4;
href.index:=indexreg;
href.scalefactor:=4;
emit_ref(A_JMP,S_NO,href);
{ generate jump table }
if not(cs_littlesize in aktglobalswitches) then
jumpSegment.concat(Tai_Align.Create_Op(4,0));
jumpSegment.concat(Tai_label.Create(table));
last:=min_;
genitem(hp);
end;
procedure ti386casenode.genlinearlist(hp : pcaserecord);
var
first : boolean;
lastrange : boolean;
last : TConstExprInt;
cond_lt,cond_le : tresflags;
procedure genitem(t : pcaserecord);
begin
if assigned(t^.less) then
genitem(t^.less);
{ need we to test the first value }
if first and (t^._low>get_min_value(left.resulttype.def)) then
begin
cg.a_cmp_const_reg_label(exprasmlist,opsize,jmp_lt,aword(t^._low),hregister,elselabel);
end;
if t^._low=t^._high then
begin
if t^._low-last=0 then
cg.a_cmp_const_reg_label(exprasmlist, opsize, OC_EQ,0,hregister,t^.statement)
else
begin
cg.a_op_const_reg(exprasmlist, OP_SUB, opsize, aword(t^._low-last), hregister);
cg.a_jmp_flags(exprasmlist,F_E,t^.statement);
end;
last:=t^._low;
lastrange:=false;
end
else
begin
{ it begins with the smallest label, if the value }
{ is even smaller then jump immediately to the }
{ ELSE-label }
if first then
begin
{ have we to ajust the first value ? }
if (t^._low>get_min_value(left.resulttype.def)) then
cg.a_op_const_reg(exprasmlist, OP_SUB, opsize, longint(t^._low), hregister);
end
else
begin
{ if there is no unused label between the last and the }
{ present label then the lower limit can be checked }
{ immediately. else check the range in between: }
cg.a_op_const_reg(exprasmlist, OP_SUB, opsize, longint(t^._low-last), hregister);
{ no jump necessary here if the new range starts at }
{ at the value following the previous one }
if ((t^._low-last) <> 1) or
(not lastrange) then
cg.a_jmp_flags(exprasmlist,cond_lt,elselabel);
end;
{we need to use A_SUB, because A_DEC does not set the correct flags, therefor
using a_op_const_reg(OP_SUB) is not possible }
emit_const_reg(A_SUB,TCGSize2OpSize[opsize],longint(t^._high-t^._low),hregister);
cg.a_jmp_flags(exprasmlist,cond_le,t^.statement);
last:=t^._high;
lastrange:=true;
end;
first:=false;
if assigned(t^.greater) then
genitem(t^.greater);
end;
begin
if with_sign then
begin
cond_lt:=F_L;
cond_le:=F_LE;
end
else
begin
cond_lt:=F_B;
cond_le:=F_BE;
end;
{ do we need to generate cmps? }
if (with_sign and (min_label<0)) then
genlinearcmplist(hp)
else
begin
last:=0;
lastrange:=false;
first:=true;
genitem(hp);
cg.a_jmp_always(exprasmlist,elselabel);
end;
end;
begin
{$ifndef TEST_GENERIC}
cinnode:=ti386innode;
{$endif}
ccasenode:=ti386casenode;
end.
{
$Log: n386set.pas,v $
Revision 1.70 2003/11/07 15:58:32 florian
* Florian's culmutative nr. 1; contains:
- invalid calling conventions for a certain cpu are rejected
- arm softfloat calling conventions
- -Sp for cpu dependend code generation
- several arm fixes
- remaining code for value open array paras on heap
Revision 1.69 2003/10/10 17:48:14 peter
* old trgobj moved to x86/rgcpu and renamed to trgx86fpu
* tregisteralloctor renamed to trgobj
* removed rgobj from a lot of units
* moved location_* and reference_* to cgobj
* first things for mmx register allocation
Revision 1.68 2003/10/09 21:31:37 daniel
* Register allocator splitted, ans abstract now
Revision 1.67 2003/10/01 20:34:49 peter
* procinfo unit contains tprocinfo
* cginfo renamed to cgbase
* moved cgmessage to verbose
* fixed ppc and sparc compiles
Revision 1.66 2003/09/28 21:48:20 peter
* fix register leaks
Revision 1.65 2003/09/07 22:09:35 peter
* preparations for different default calling conventions
* various RA fixes
Revision 1.64 2003/09/05 11:21:39 marco
* applied Peter's patch. Now cycles.
Revision 1.63 2003/09/03 15:55:01 peter
* NEWRA branch merged
Revision 1.62.2.1 2003/08/29 17:29:00 peter
* next batch of updates
Revision 1.62 2003/06/12 22:10:44 jonas
* t386innode.pass_2 already doesn't call a helper anymore since a long
time
Revision 1.61 2003/06/03 21:11:09 peter
* cg.a_load_* get a from and to size specifier
* makeregsize only accepts newregister
* i386 uses generic tcgnotnode,tcgunaryminus
Revision 1.60 2003/06/01 21:38:06 peter
* getregisterfpu size parameter added
* op_const_reg size parameter added
* sparc updates
Revision 1.59 2003/05/31 15:04:31 peter
* load_loc_reg update
Revision 1.58 2003/05/22 21:32:29 peter
* removed some unit dependencies
Revision 1.57 2003/04/27 11:21:35 peter
* aktprocdef renamed to current_procdef
* procinfo renamed to current_procinfo
* procinfo will now be stored in current_module so it can be
cleaned up properly
* gen_main_procsym changed to create_main_proc and release_main_proc
to also generate a tprocinfo structure
* fixed unit implicit initfinal
Revision 1.56 2003/04/25 08:25:26 daniel
* Ifdefs around a lot of calls to cleartempgen
* Fixed registers that are allocated but not freed in several nodes
* Tweak to register allocator to cause less spills
* 8-bit registers now interfere with esi,edi and ebp
Compiler can now compile rtl successfully when using new register
allocator
Revision 1.55 2003/04/23 09:51:16 daniel
* Removed usage of edi in a lot of places when new register allocator used
+ Added newra versions of g_concatcopy and secondadd_float
Revision 1.54 2003/04/22 23:50:23 peter
* firstpass uses expectloc
* checks if there are differences between the expectloc and
location.loc from secondpass in EXTDEBUG
Revision 1.53 2003/04/22 14:33:38 peter
* removed some notes/hints
Revision 1.52 2003/04/22 10:09:35 daniel
+ Implemented the actual register allocator
+ Scratch registers unavailable when new register allocator used
+ maybe_save/maybe_restore unavailable when new register allocator used
Revision 1.51 2003/03/13 19:52:23 jonas
* and more new register allocator fixes (in the i386 code generator this
time). At least now the ppc cross compiler can compile the linux
system unit again, but I haven't tested it.
Revision 1.50 2003/02/26 23:06:13 daniel
* Fixed an illegal use of makeregsize
Revision 1.49 2003/02/19 22:39:56 daniel
* Fixed a few issues
Revision 1.48 2003/02/19 22:00:15 daniel
* Code generator converted to new register notation
- Horribily outdated todo.txt removed
Revision 1.47 2003/01/13 14:54:34 daniel
* Further work to convert codegenerator register convention;
internalerror bug fixed.
Revision 1.46 2003/01/08 18:43:57 daniel
* Tregister changed into a record
Revision 1.45 2002/11/25 17:43:27 peter
* splitted defbase in defutil,symutil,defcmp
* merged isconvertable and is_equal into compare_defs(_ext)
* made operator search faster by walking the list only once
Revision 1.44 2002/10/03 21:34:45 carl
* range check error fixes
Revision 1.43 2002/09/17 18:54:05 jonas
* a_load_reg_reg() now has two size parameters: source and dest. This
allows some optimizations on architectures that don't encode the
register size in the register name.
Revision 1.42 2002/09/16 18:08:26 peter
* fix last optimization in genlinearlist, detected by bug tw1066
* use generic casenode.pass2 routine and override genlinearlist
* add jumptable support to generic casenode, by default there is
no jumptable support
Revision 1.41 2002/09/09 13:57:45 jonas
* small optimization to case genlist() case statements
Revision 1.40 2002/08/17 09:23:46 florian
* first part of procinfo rewrite
Revision 1.39 2002/08/12 15:08:42 carl
+ stab register indexes for powerpc (moved from gdb to cpubase)
+ tprocessor enumeration moved to cpuinfo
+ linker in target_info is now a class
* many many updates for m68k (will soon start to compile)
- removed some ifdef or correct them for correct cpu
Revision 1.38 2002/08/11 14:32:30 peter
* renamed current_library to objectlibrary
Revision 1.37 2002/08/11 13:24:17 peter
* saving of asmsymbols in ppu supported
* asmsymbollist global is removed and moved into a new class
tasmlibrarydata that will hold the info of a .a file which
corresponds with a single module. Added librarydata to tmodule
to keep the library info stored for the module. In the future the
objectfiles will also be stored to the tasmlibrarydata class
* all getlabel/newasmsymbol and friends are moved to the new class
Revision 1.36 2002/07/23 14:31:00 daniel
* Added internal error when asked to generate code for 'if expr in []'
Revision 1.35 2002/07/20 11:58:04 florian
* types.pas renamed to defbase.pas because D6 contains a types
unit so this would conflicts if D6 programms are compiled
+ Willamette/SSE2 instructions to assembler added
Revision 1.34 2002/07/11 14:41:34 florian
* start of the new generic parameter handling
Revision 1.33 2002/07/06 20:27:26 carl
+ generic set handling
Revision 1.32 2002/07/01 18:46:33 peter
* internal linker
* reorganized aasm layer
Revision 1.31 2002/05/18 13:34:25 peter
* readded missing revisions
Revision 1.30 2002/05/16 19:46:52 carl
+ defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
+ try to fix temp allocation (still in ifdef)
+ generic constructor calls
+ start of tassembler / tmodulebase class cleanup
Revision 1.28 2002/05/13 19:54:38 peter
* removed n386ld and n386util units
* maybe_save/maybe_restore added instead of the old maybe_push
Revision 1.27 2002/05/12 16:53:17 peter
* moved entry and exitcode to ncgutil and cgobj
* foreach gets extra argument for passing local data to the
iterator function
* -CR checks also class typecasts at runtime by changing them
into as
* fixed compiler to cycle with the -CR option
* fixed stabs with elf writer, finally the global variables can
be watched
* removed a lot of routines from cga unit and replaced them by
calls to cgobj
* u32bit-s32bit updates for and,or,xor nodes. When one element is
u32bit then the other is typecasted also to u32bit without giving
a rangecheck warning/error.
* fixed pascal calling method with reversing also the high tree in
the parast, detected by tcalcst3 test
Revision 1.26 2002/04/25 20:16:40 peter
* moved more routines from cga/n386util
Revision 1.25 2002/04/21 19:02:07 peter
* removed newn and disposen nodes, the code is now directly
inlined from pexpr
* -an option that will write the secondpass nodes to the .s file, this
requires EXTDEBUG define to actually write the info
* fixed various internal errors and crashes due recent code changes
Revision 1.24 2002/04/21 15:37:26 carl
* changeregsize -> rg.makeregsize
Revision 1.23 2002/04/19 15:39:35 peter
* removed some more routines from cga
* moved location_force_reg/mem to ncgutil
* moved arrayconstructnode secondpass to ncgld
Revision 1.22 2002/04/15 19:44:21 peter
* fixed stackcheck that would be called recursively when a stack
error was found
* generic changeregsize(reg,size) for i386 register resizing
* removed some more routines from cga unit
* fixed returnvalue handling
* fixed default stacksize of linux and go32v2, 8kb was a bit small :-)
Revision 1.21 2002/04/02 17:11:36 peter
* tlocation,treference update
* LOC_CONSTANT added for better constant handling
* secondadd splitted in multiple routines
* location_force_reg added for loading a location to a register
of a specified size
* secondassignment parses now first the right and then the left node
(this is compatible with Kylix). This saves a lot of push/pop especially
with string operations
* adapted some routines to use the new cg methods
Revision 1.20 2002/03/31 20:26:39 jonas
+ a_loadfpu_* and a_loadmm_* methods in tcg
* register allocation is now handled by a class and is mostly processor
independent (+rgobj.pas and i386/rgcpu.pas)
* temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
* some small improvements and fixes to the optimizer
* some register allocation fixes
* some fpuvaroffset fixes in the unary minus node
* push/popusedregisters is now called rg.save/restoreusedregisters and
(for i386) uses temps instead of push/pop's when using -Op3 (that code is
also better optimizable)
* fixed and optimized register saving/restoring for new/dispose nodes
* LOC_FPU locations now also require their "register" field to be set to
R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
- list field removed of the tnode class because it's not used currently
and can cause hard-to-find bugs
}
syntax highlighted by Code2HTML, v. 0.9.1