%%
%% This is file 'pyx.def',
%%
%% Copyright (C) 2003,2006 Michael Schindler <m-schindler@users.sourceforge.net>
%%
%% this file is based on `dvips.def' from the Standard LaTeX `Graphics Bundle',
%% available via ftp from CTAN
%%
%% `pyx.def' may be distributed under the terms of the LaTeX Project Public
%% License, as described in lppl.txt in the base LaTeX distribution.
%% Either version 1.0 or, at your option, any later version.
%%
%%
% TODO: - documentation
%
\ProvidesFile{pyx.def}
        [2006/05/17 driver-dependant file]

% %%%%%%  auxiliary macros  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
% used in DEF file only:
% check if #1 is in [0,1]
%
\def\c@lor@arg#1{%
  \dimen@#1\p@
  \ifdim\dimen@<\z@\dimen@\maxdimen\fi
  \ifdim\dimen@>\p@
    \PackageError{color}{Argument `#1' not in range [0,1]}\@ehd
  \fi}
%
% >>>

% %%%%%%  (1a) gray, cmyk, rgb and RGB colors  %%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
% used in color.sty:  \color@gray, cmyk, rgb, RGB, hsb
% these commands are created with \csname as a
% combination of 'color@' and 'gray'/'cmyk'/'rgb'/'RGB'/'hsb'
% in color.sty by \@undeclaredcolor
% gray, cmyk, rgb, hsb all take numbers in [0,1] as first argument(s)
% RGB takes numbers in [0,255] as first arguments
%
\def\color@gray#1#2{%
  \c@lor@arg{#2}%       % check the argument
  \edef#1{gray #2}%     % prepare for command
  }
%
\def\color@cmyk#1#2{\c@lor@@cmyk#2\@@#1} % \@@ is only a separator for the arguments!
\def\c@lor@@cmyk#1,#2,#3,#4\@@#5{%
  \c@lor@arg{#4}%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \edef#5{cmyk #1 #2 #3 #4}%    #5 is always \current@color (only once a \tempa)
  }
%
\def\color@rgb#1#2{\c@lor@@rgb#2\@@#1}
\def\c@lor@@rgb#1,#2,#3\@@#4{%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \edef#4{rgb #1 #2 #3}%
  }
%
\def\color@RGB#1#2{\c@lor@@RGB#2\@@#1}
\def\c@lor@@RGB#1,#2,#3\@@#4{%
 \c@lor@RGB@rgb{#1}\@tempa                % renormalise
 \c@lor@RGB@rgb{#2}\@tempb
 \c@lor@RGB@rgb{#3}\@tempc
 \c@lor@@rgb\@tempa,\@tempb,\@tempc\@@#4%  % call with normalised values
}
\def\c@lor@RGB@rgb#1#2{%
  \dimen@#1\p@
  \divide\dimen@\@cclv         % divide by 255
  \edef#2{\strip@pt\dimen@}}   % strip the number
%
\def\color@hsb#1#2{\c@lor@@hsb#2\@@#1}
\def\c@lor@@hsb#1,#2,#3\@@#4{%
  \c@lor@arg{#1}%
  \c@lor@arg{#2}%
  \c@lor@arg{#3}%
  \edef#4{hsb #1 #2 #3}% this is the string defining the color in the special.
%                      % it is stored in the variable \current@color
  }
%% >>>
% %%%%%%  (1b) "texnamed" colors  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
% used in color.sty: \color@named \col@...
% like above with the use of \csname
%
\def\color@named#1#2{\c@lor@@named#2,,\@@#1}
\def\c@lor@@named#1,#2,#3\@@#4{%
  \@ifundefined{col@#1}%
    {\PackageError{color}{Undefined color `#1'}\@ehd}%
  {\edef#4{texnamed #1}}%   % arguments 2,3 are thrown away? Maybe an error detection mechanism
  } % \col@#1 is defined by \define@color@named
\def\current@color{texnamed Black}
\def\define@color@named#1#2{% for \DefineNamedColor only
  \expandafter\let\csname col@#1\endcsname\@nnil}
% >>>
% %%%%%%  (1c) "pyxcolor" colors  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
%
% use with \textcolor[pyxcolor]{Name}
% where Name has to be defined in PyX as 'color.cmyk.Name', 'color.rgb.red', ...
% Attention! PyX has to do the error detection if the color is not defined!
%
\def\color@pyx#1#2{\c@olor@@pyx#2\@@#1}
\def\c@olor@@pyx#1\@@#2{%
  \edef#2{pyxcolor #1}}
% >>>
% %%%%%%  (1) colors general  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
%
% \set@color is called by \@(un)declaredcolor in color.sty
% This is the starting string of the special
%
\def\set@color{%
 \special{PyX:color_begin \current@color
 }\aftergroup\reset@color} % the 'group' is the one in \@textcolor: arguments 1 and 3
\def\reset@color{\special{PyX:color_end}}
%
% BACKGROUND COLOR is disabled
\def\set@page@color{\PackageError{color}{Please adjust the pagecolor in PyX, not in LaTeX!}}
% >>>

% %%%%%%  (2) eps-file inclusion %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
%
\def\Ginclude@eps#1{%
 \message{<#1>}%
  \bgroup
  \def\@tempa{!}%
  \dimen@=0.996264009963\Gin@req@width
  \@tempdima=0.996264009963\Gin@req@height
  \special{PyX:epsinclude\space
    file=\Gin@base\Gin@ext\space
    llx=\Gin@llx\space
    lly=\Gin@lly\space
    urx=\Gin@urx\space
    ury=\Gin@ury\space
    \ifx\Gin@scalex\@tempa\else width=\strip@pt\dimen@\space\fi
    \ifx\Gin@scaley\@tempa\else height=\strip@pt\@tempdima\space\fi
    \ifGin@clip clip=1\fi}%
  \egroup}
%
% bmp, oztex, pntg, pict file inclusions:
% not available anymore
% \Ginclude@bmp eventually used in graphics(x).sty
% \Ginclude@pntg eventually used in graphics(x).sty
% \Ginclude@pict eventually used in graphics(x).sty
%
\def\Ginclude@bmp#1{%
  \PackageError{color}{bmp file inclusion is not supported in PyX. Please use eps files.}}
\def\Ginclude@pntg#1{
  \PackageError{color}{pntg file inclusion is not supported in PyX. Please use eps files.}}
\def\Ginclude@pict#1{
  \PackageError{color}{pict file inclusion is not supported in PyX. Please use eps files.}}
%
% general stuff
%
%\def\Gin@PS@raw#1{\special{ps: #1}}
%\def\Gin@PS@restored#1{\special{" #1}}
%\def\Gin@PS@literal@header#1{\AtBeginDvi{\special{! #1}}}
%\def\Gin@PS@file@header#1{\AtBeginDvi{\special{header=#1}}}
%
\def\Gin@extensions{.eps,.ps}
\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
\@namedef{Gin@rule@*}#1{{eps}{\Gin@ext}{#1}}
%
% >>>

% %%%%%%  (3) rotations  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
\def\Grot@start{\special{PyX:rotate_begin \Grot@angle}}
\def\Grot@end{\special{PyX:rotate_end}}
% >>>

% %%%%%%  (4) scalings  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <<<
%
\def\Gscale@start{\special{PyX:scale_begin \Gscale@x\space \Gscale@y}}
\def\Gscale@end{\special{PyX:scale_end}}
% >>>
\endinput

% vim:foldmethod=marker:foldmarker=<<<,>>>
% vim:syntax=tex

%% End of file `pyx.def'.