/* * Cisco router simulation platform. * Copyright (c) 2005,2006 Christophe Fillot (cf@utc.fr) * * Generic Cisco 7200 routines and definitions (EEPROM,...). * * Notes on IRQs (see "show stack"): * * - triggering IRQ 3: we get indefinitely (for each slot): * "Error: Unexpected NM Interrupt received from slot: 6" * * - triggering IRQ 4: GT64010 reg access: probably "DMA/Timer Interrupt" * * - triggering IRQ 6: we get (probably "OIR/Error Interrupt") * %ERR-1-PERR: PCI bus parity error * %ERR-1-SERR: PCI bus system/parity error * %ERR-1-FATAL: Fatal error interrupt, No reloading * err_stat=0x0, err_enable=0x0, mgmt_event=0xFFFFFFFF * */ #ifndef __DEV_C7200_H__ #define __DEV_C7200_H__ #include #include "utils.h" #include "net.h" #include "device.h" #include "pci_dev.h" #include "nmc93cX6.h" #include "dev_mv64460.h" #include "net_io.h" #include "vm.h" /* Default C7200 parameters */ #define C7200_DEFAULT_NPE_TYPE "npe-200" #define C7200_DEFAULT_MIDPLANE "vxr" #define C7200_DEFAULT_RAM_SIZE 256 #define C7200_DEFAULT_ROM_SIZE 4 #define C7200_DEFAULT_NVRAM_SIZE 128 #define C7200_DEFAULT_CONF_REG 0x2102 #define C7200_DEFAULT_CLOCK_DIV 4 #define C7200_DEFAULT_RAM_MMAP 1 #define C7200_DEFAULT_DISK0_SIZE 64 #define C7200_DEFAULT_DISK1_SIZE 0 /* 6 slots + 1 I/O card */ #define C7200_MAX_PA_BAYS 7 /* C7200 Timer IRQ (virtual) */ #define C7200_VTIMER_IRQ 0 /* C7200 DUART Interrupt */ #define C7200_DUART_IRQ 5 /* C7200 Network I/O Interrupt */ #define C7200_NETIO_IRQ 2 /* C7200 PA Management Interrupt handler */ #define C7200_PA_MGMT_IRQ 3 /* C7200 GT64k DMA/Timer Interrupt */ #define C7200_GT64K_IRQ 4 /* C7200 Error/OIR Interrupt */ #define C7200_OIR_IRQ 6 /* Network IRQ */ #define C7200_NETIO_IRQ_BASE 32 #define C7200_NETIO_IRQ_PORT_BITS 3 #define C7200_NETIO_IRQ_PORT_MASK ((1 << C7200_NETIO_IRQ_PORT_BITS) - 1) #define C7200_NETIO_IRQ_PER_SLOT (1 << C7200_NETIO_IRQ_PORT_BITS) #define C7200_NETIO_IRQ_END \ (C7200_NETIO_IRQ_BASE + (C7200_MAX_PA_BAYS * C7200_NETIO_IRQ_PER_SLOT) - 1) /* C7200 base ram limit (256 Mb) */ #define C7200_BASE_RAM_LIMIT 256 /* C7200 common device addresses */ #define C7200_GT64K_ADDR 0x14000000ULL #define C7200_GT64K_SEC_ADDR 0x15000000ULL #define C7200_BOOTFLASH_ADDR 0x1a000000ULL #define C7200_NVRAM_ADDR 0x1e000000ULL #define C7200_MPFPGA_ADDR 0x1e800000ULL #define C7200_IOFPGA_ADDR 0x1e840000ULL #define C7200_BITBUCKET_ADDR 0x1f000000ULL #define C7200_ROM_ADDR 0x1fc00000ULL #define C7200_IOMEM_ADDR 0x20000000ULL #define C7200_SRAM_ADDR 0x4b000000ULL #define C7200_BSWAP_ADDR 0xc0000000ULL #define C7200_PCI_IO_ADDR 0x100000000ULL /* NPE-G1 specific info */ #define C7200_G1_NVRAM_ADDR 0x1e400000ULL /* NPE-G2 specific info */ #define C7200_G2_BSWAP_ADDR 0xc0000000ULL #define C7200_G2_BOOTFLASH_ADDR 0xe8000000ULL #define C7200_G2_PCI_IO_ADDR 0xf0000000ULL #define C7200_G2_MV64460_ADDR 0xf1000000ULL #define C7200_G2_MPFPGA_ADDR 0xfe000000ULL #define C7200_G2_IOFPGA_ADDR 0xfe040000ULL #define C7200_G2_NVRAM_ADDR 0xff000000ULL #define C7200_G2_ROM_ADDR 0xfff00000ULL /* NVRAM size for NPE-G2: 2 Mb */ #define C7200_G2_NVRAM_SIZE (2 * 1048576) /* Reserved space for ROM in NVRAM */ #define C7200_NVRAM_ROM_RES_SIZE 2048 /* C7200 physical address bus mask: keep only the lower 33 bits */ #define C7200_ADDR_BUS_MASK 0x1ffffffffULL /* C7200 ELF Platform ID */ #define C7200_ELF_MACHINE_ID 0x19 /* NPE families */ enum { C7200_NPE_FAMILY_MIPS = 0, C7200_NPE_FAMILY_PPC, }; /* C7200 router */ typedef struct c7200_router c7200_t; /* Prototype of NPE driver initialization function */ typedef int (*c7200_npe_init_fn)(c7200_t *router); /* Prototype of PA driver initialization function */ typedef int (*c7200_pa_init_fn)(c7200_t *router,char *name,u_int pa_bay); /* Prototype of PA driver shutdown function */ typedef int (*c7200_pa_shutdown_fn)(c7200_t *router,u_int pa_bay); /* Prototype of PA NIO set function */ typedef int (*c7200_pa_set_nio_fn)(c7200_t *router,u_int pa_bay,u_int port_id, netio_desc_t *nio); /* Prototype of PA NIO unset function */ typedef int (*c7200_pa_unset_nio_fn)(c7200_t *router,u_int pa_bay, u_int port_id); /* Prototype of NM NIO show info function */ typedef int (*c7200_pa_show_info_fn)(c7200_t *router,u_int pa_bay); /* C7200 Port Adapter Driver */ struct c7200_pa_driver { char *dev_type; int supported; c7200_pa_init_fn pa_init; c7200_pa_shutdown_fn pa_shutdown; c7200_pa_set_nio_fn pa_set_nio; c7200_pa_unset_nio_fn pa_unset_nio; c7200_pa_show_info_fn pa_show_info; }; /* C7200 NIO binding to a slot/port */ struct c7200_nio_binding { netio_desc_t *nio; u_int port_id; struct c7200_nio_binding *prev,*next; }; /* C7200 PA bay */ struct c7200_pa_bay { char *dev_name; /* Device Name */ char *dev_type; /* Device Type */ struct cisco_eeprom eeprom; /* PA EEPROM */ struct pci_bus *pci_map; /* PCI bus */ struct c7200_pa_driver *pa_driver; /* PA driver */ void *drv_info; /* Private driver info */ struct c7200_nio_binding *nio_list; /* NIO bindings to ports */ }; /* C7200 NPE Driver */ struct c7200_npe_driver { char *npe_type; int npe_family; c7200_npe_init_fn npe_init; int max_ram_size; int supported; m_uint64_t nvram_addr; int iocard_required; int clpd6729_pci_bus; int clpd6729_pci_dev; int dec21140_pci_bus; int dec21140_pci_dev; }; /* C7200 router */ struct c7200_router { /* Midplane type (standard,VXR) and chassis MAC address */ char *midplane_type; int midplane_version; n_eth_addr_t mac_addr; /* Associated VM instance */ vm_instance_t *vm; /* MV64460 device for NPE-G2 */ struct mv64460_data *mv64460_sysctr; /* Midplane FPGA */ struct c7200_mpfpga_data *mpfpga_data; /* NPE and PA information */ struct c7200_npe_driver *npe_driver; struct c7200_pa_bay pa_bay[C7200_MAX_PA_BAYS]; m_uint8_t oir_status; /* Hidden I/O bridge hack to support PCMCIA */ struct pci_bridge *io_pci_bridge; struct pci_bus *pcmcia_bus; /* Midplane EEPROM can be modified to change the chassis MAC address... */ struct cisco_eeprom cpu_eeprom,mp_eeprom,pem_eeprom; struct nmc93cX6_group sys_eeprom_g1; /* EEPROMs for CPU and Midplane */ struct nmc93cX6_group sys_eeprom_g2; /* EEPROM for PEM */ struct nmc93cX6_group pa_eeprom_g1; /* EEPROMs for bays 0, 1, 3, 4 */ struct nmc93cX6_group pa_eeprom_g2; /* EEPROMs for bays 2, 5, 6 */ }; /* Initialize EEPROM groups */ void c7200_init_eeprom_groups(c7200_t *router); /* Create a new router instance */ c7200_t *c7200_create_instance(char *name,int instance_id); /* Delete a router instance */ int c7200_delete_instance(char *name); /* Delete all router instances */ int c7200_delete_all_instances(void); /* Save configuration of a C7200 instance */ void c7200_save_config(c7200_t *router,FILE *fd); /* Save configurations of all C7200 instances */ void c7200_save_config_all(FILE *fd); /* Get network IRQ for specified slot/port */ u_int c7200_net_irq_for_slot_port(u_int slot,u_int port); /* Set PA EEPROM definition */ int c7200_pa_set_eeprom(c7200_t *router,u_int pa_bay, const struct cisco_eeprom *eeprom); /* Unset PA EEPROM definition (empty bay) */ int c7200_pa_unset_eeprom(c7200_t *router,u_int pa_bay); /* Check if a bay has a port adapter */ int c7200_pa_check_eeprom(c7200_t *router,u_int pa_bay); /* Get bay info */ struct c7200_pa_bay *c7200_pa_get_info(c7200_t *router,u_int pa_bay); /* Get PA type */ char *c7200_pa_get_type(c7200_t *router,u_int pa_bay); /* Get driver info about the specified slot */ void *c7200_pa_get_drvinfo(c7200_t *router,u_int pa_bay); /* Set driver info for the specified slot */ int c7200_pa_set_drvinfo(c7200_t *router,u_int pa_bay,void *drv_info); /* Add a PA binding */ int c7200_pa_add_binding(c7200_t *router,char *dev_type,u_int pa_bay); /* Remove a PA binding */ int c7200_pa_remove_binding(c7200_t *router,u_int pa_bay); /* Find a NIO binding */ struct c7200_nio_binding * c7200_pa_find_nio_binding(c7200_t *router,u_int pa_bay,u_int port_id); /* Add a network IO binding */ int c7200_pa_add_nio_binding(c7200_t *router,u_int pa_bay,u_int port_id, char *nio_name); /* Remove a NIO binding */ int c7200_pa_remove_nio_binding(c7200_t *router,u_int pa_bay,u_int port_id); /* Remove all NIO bindings for the specified PA */ int c7200_pa_remove_all_nio_bindings(c7200_t *router,u_int pa_bay); /* Enable a Network IO descriptor for a Port Adapter */ int c7200_pa_enable_nio(c7200_t *router,u_int pa_bay,u_int port_id); /* Disable Network IO descriptor of a Port Adapter */ int c7200_pa_disable_nio(c7200_t *router,u_int pa_bay,u_int port_id); /* Enable all NIO of the specified PA */ int c7200_pa_enable_all_nio(c7200_t *router,u_int pa_bay); /* Disable all NIO of the specified PA */ int c7200_pa_disable_all_nio(c7200_t *router,u_int pa_bay); /* Initialize a Port Adapter */ int c7200_pa_init(c7200_t *router,u_int pa_bay); /* Shutdown a Port Adapter */ int c7200_pa_shutdown(c7200_t *router,u_int pa_bay); /* Shutdown all PA of a router */ int c7200_pa_shutdown_all(c7200_t *router); /* Show info about all NMs */ int c7200_pa_show_all_info(c7200_t *router); /* Create a Port Adapter (command line) */ int c7200_cmd_pa_create(c7200_t *router,char *str); /* Add a Network IO descriptor binding (command line) */ int c7200_cmd_add_nio(c7200_t *router,char *str); /* Show the list of available PA drivers */ void c7200_pa_show_drivers(void); /* Get an NPE driver */ struct c7200_npe_driver *c7200_npe_get_driver(char *npe_type); /* Set the NPE type */ int c7200_npe_set_type(c7200_t *router,char *npe_type); /* Show the list of available NPE drivers */ void c7200_npe_show_drivers(void); /* Set Midplane type */ int c7200_midplane_set_type(c7200_t *router,char *midplane_type); /* Set chassis MAC address */ int c7200_midplane_set_mac_addr(c7200_t *router,char *mac_addr); /* Show C7200 hardware info */ void c7200_show_hardware(c7200_t *router); /* Initialize default parameters for a C7200 */ void c7200_init_defaults(c7200_t *router); /* Initialize a Cisco 7200 instance */ int c7200_init_instance(c7200_t *router); /* Stop a Cisco 7200 instance */ int c7200_stop_instance(c7200_t *router); /* Trigger an OIR event */ int c7200_trigger_oir_event(c7200_t *router,u_int slot_mask); /* Initialize a new PA while the virtual router is online (OIR) */ int c7200_pa_init_online(c7200_t *router,u_int pa_bay); /* Stop a PA while the virtual router is online (OIR) */ int c7200_pa_stop_online(c7200_t *router,u_int pa_bay); /* dev_c7200_iofpga_init() */ int dev_c7200_iofpga_init(c7200_t *router,m_uint64_t paddr,m_uint32_t len); /* PA drivers */ extern struct c7200_pa_driver dev_c7200_iocard_fe_driver; extern struct c7200_pa_driver dev_c7200_iocard_2fe_driver; extern struct c7200_pa_driver dev_c7200_iocard_ge_e_driver; extern struct c7200_pa_driver dev_c7200_pa_fe_tx_driver; extern struct c7200_pa_driver dev_c7200_pa_2fe_tx_driver; extern struct c7200_pa_driver dev_c7200_pa_ge_driver; extern struct c7200_pa_driver dev_c7200_pa_4e_driver; extern struct c7200_pa_driver dev_c7200_pa_8e_driver; extern struct c7200_pa_driver dev_c7200_pa_4t_driver; extern struct c7200_pa_driver dev_c7200_pa_8t_driver; extern struct c7200_pa_driver dev_c7200_pa_a1_driver; extern struct c7200_pa_driver dev_c7200_pa_pos_oc3_driver; extern struct c7200_pa_driver dev_c7200_pa_4b_driver; extern struct c7200_pa_driver dev_c7200_pa_mc8te1_driver; #endif