#---------------------------------------------------------------------
# makefile.vc --
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
#---------------------------------------------------------------------
# RCS: @(#) $Id: makefile.vc,v 1.30 2004/12/23 09:12:51 vasiljevic Exp $
#---------------------------------------------------------------------

!if "$(MSVCDIR)" == ""
MSG = ^
You'll need to run vcvars32.bat from Developer Studio, first, to setup^
the environment.  Jump to this line to read the new instructions.
!error $(MSG)
!endif

#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1)  It is now necessary to have MSVCDir set in the environment.  This is used
#     as a check to see if vcvars32.bat had been run prior to running nmake or
#     during the install of Microsoft Developer Studio, MSVCDir had been set
#     globally and the PATH adjusted.  Either way is valid.
#
#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
#     directory to setup the proper environment, if needed, for your current
#     setup.  This is a needed bootstrap requirement and allows the swapping of
#     different environments to be easier.
#
# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
#     vcvars32.bat according to the instructions for it.  This can also turn on
#     the 64-bit compiler, if your SDK has it.
#
# 3)  Targets are:
#	release  -- builds the core, the shell. (default)
#	all      -- builds everything.
#	test     -- builds and runs the test suite.
#	install  -- installs the built binaries and libraries to $(INSTALLDIR)
#		    as the root of the install tree.
#	clean    -- removes the contents of $(TMP_DIR)
#	hose     -- removes the contents of $(TMP_DIR) and $(OUT_DIR)
#	genstubs -- rebuilds the Stubs table and support files (dev only).
#	depend   -- Generates an accurate set of source dependancies for this
#		    makefile.  Helpful to avoid problems when the sources are
#		    refreshed and you rebuild, but can "overbuild" when common
#		    headers like tkInt.h just get small changes.
#
# 4)  Macros usable on the commandline:
#	TCLDIR=<path>
#		Sets the location for where to find the Tcl headers and
#		libraries.  The install point is assumed when not specified.
#		Tk does need the source directory, though.  Tk comes very close
#		to not needing the sources, but does, in fact, require them.
#
#	INSTALLDIR=<path>
#		Sets where to install Tcl from the built binaries.
#		C:\Progra~1\Tcl is assumed when not specified.
#
#	OPTS=static,msvcrt,threads,symbols,profile,none
#		Sets special options for the core.  The default is for none.
#		Any combination of the above may be used (comma separated).
#		'none' will over-ride everything to nothing.
#
#		static  =  Builds a static library of the core instead of a
#			   dll.  The shell will be static (and large), as well.
#		msvcrt  =  Effects the static option only to switch it from
#			   using libcmt(d) as the C runtime [by default] to
#			   msvcrt(d). This is useful for static embedding
#			   support.
#		symbols =  Adds symbols for step debugging.
#		profile =  Adds profiling hooks.  Map file is assumed.
#		loimpact =  Adds a flag for how NT treats the heap to keep memory
#			   in use, low.  This is said to impact alloc performance.
#
#	STATS=memdbg,compdbg,none
#		Sets optional memory and bytecode compiler debugging code added
#		to the core.  The default is for none.  Any combination of the
#		above may be used (comma separated).  'none' will over-ride
#		everything to nothing.
#
#		memdbg   = Enables the debugging memory allocator.
#		compdbg  = Enables byte compilation logging.
#
#	MACHINE=(IX86|IA64|ALPHA)
#		Set the machine type used for the compiler, linker, and
#		resource compiler.  This hook is needed to tell the tools
#		when alternate platforms are requested.  IX86 is the default
#		when not specified.
#
#	TMP_DIR=<path>
#	OUT_DIR=<path>
#		Hooks to allow the intermediate and output directories to be
#		changed.  $(OUT_DIR) is assumed to be 
#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
#	TESTPAT=<file>
#		Reads the tests requested to be run from this file.
#
# 5)  Examples:
#
#	Basic syntax of calling nmake looks like this:
#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
#                        Standard (no frills)
#       c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tk_src\win\>nmake -f makefile.vc release
#       c:\tk_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
#                         Building for Win64
#       c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tk_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
#       Targeting Windows pre64 RETAIL
#       c:\tk_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################


#    //==================================================================\\
#   >>[               -> Do not modify below this line. <-               ]<<
#   >>[  Please, use the commandline macros to modify how Tcl is built.  ]<<
#   >>[  If you need more features, send us a patch for more macros.     ]<<
#    \\==================================================================//


###############################################################################
#==============================================================================
#------------------------------------------------------------------------------

!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG) 
!endif

PROJECT=thread
!include "rules.vc"
!include "pkg.vc"

SOURCEROOT	= ..\..
GENERICDIR	= $(SOURCEROOT)\generic
TESTDIR		= $(SOURCEROOT)\tests
WINDIR		= $(SOURCEROOT)\win

THREADLIBBASE	= $(OUT_DIR)\thread$(PACKAGE_MAJOR)$(PACKAGE_MINOR)$(SUFX:t=)
THREADLIB	= $(THREADLIBBASE).$(EXT)

THREADOBJS	= \
	$(TMP_DIR)\psGdbm.obj \
	$(TMP_DIR)\tclXkeylist.obj \
	$(TMP_DIR)\threadCmd.obj \
	$(TMP_DIR)\threadSpCmd.obj \
	$(TMP_DIR)\threadSvCmd.obj \
	$(TMP_DIR)\threadPoolCmd.obj \
	$(TMP_DIR)\threadSvListCmd.obj \
	$(TMP_DIR)\threadSvKeylistCmd.obj \
	$(TMP_DIR)\threadWin.obj \
!if !$(STATIC_BUILD)
	$(TMP_DIR)\thread.res
!endif

!if $(TCLINSTALL)
TCL_INCLUDES	= -I "$(_TCLDIR)\include"
!else
TCL_INCLUDES	= -I "$(_TCLDIR)\generic"
!endif

THREAD_DEFINES	= $(OPTDEFINES)

LIB_INSTALL_DIR		= $(_INSTALLDIR)\lib
BIN_INSTALL_DIR		= $(_INSTALLDIR)\bin
DOC_INSTALL_DIR		= $(_INSTALLDIR)\doc
SCRIPT_INSTALL_DIR	= $(_INSTALLDIR)\lib\$(PROJECT)$(DOTVERSION)
INCLUDE_INSTALL_DIR	= $(_INSTALLDIR)\include


#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------


!if $(DEBUG)
!if "$(MACHINE)" == "IA64"
cdebug = -Od -Zi
!else
cdebug = -Z7 -Od -WX
!endif
!else
# This cranks the optimization level up to max speed.
cdebug = -O2
!endif

!if $(MSVCRT)
crt = -MD$(DBGX)
!else
crt = -MT$(DBGX)
!endif

cflags = -nologo -c -W2 -YX -GB $(cdebug) $(crt) \
	-DPACKAGE_VERSION=\"$(PACKAGE_VERSION)\" -DBUILD_thread \
	-Fp$(TMP_DIR)\ -Fo$(TMP_DIR)\ $(TCL_INCLUDES)

!if $(PENT_0F_ERRATA)
cflags = $(cflags) -QI0f
!endif

!if $(ITAN_B_ERRATA)
cflags = $(cflags) -QIA64_Bx
!endif

!if !$(STATIC_BUILD)
cflags = $(cflags) -DUSE_TCL_STUBS
!endif

#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------


!if $(DEBUG)
ldebug	= -debug:full -debugtype:cv
!else
ldebug	= -release -opt:ref -opt:icf,3
!endif

# declarations common to all linker options
lflags	= -nologo -machine:$(MACHINE) $(ldebug)

!if $(PROFILE)
lflags	= $(lflags) -profile
!endif

!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
# align sections for PE size savings.
lflags	= $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
# align sections for speed in loading by choosing the virtual page size.
lflags	= $(lflags) -align:4096
!endif

!if $(LOIMPACT)
lflags	= $(lflags) -ws:aggressive
!endif

dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows

baselibs  = kernel32.lib advapi32.lib user32.lib


#---------------------------------------------------------------------
# Project specific targets
#---------------------------------------------------------------------


all: setup $(THREADLIB)
install:  install-binaries install-libraries

setup:
	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)

test: all
    $(TCLSH) <<
regsub -all {\\} {$(THREADLIB)} {/} threadlib
package ifneeded Thread $(PACKAGE_VERSION) [list load $$threadlib]
regsub -all {\\} {$(TESTDIR)} {/} testdir
source [file join $$testdir all.tcl]
<<

!if $(STATIC_BUILD)
$(THREADLIB) : $(THREADOBJS)
	@echo Creating Static Library...
	$(lib32) -nologo -machine:$(MACHINE) -out:$@ @<<
!else
$(THREADLIB) : $(THREADOBJS) $(TCLSTUBSLIB)
	@echo Linking...
	$(link32) $(dlllflags) -out:$@ $(TCLSTUBLIB) $(baselibs) @<<
!endif
$(THREADOBJS)
<<
!if $(STATIC_BUILD) == 0
	-@del $*.exp
!endif


install-binaries:
	@$(CPY) "$(THREADLIB)" "$(SCRIPT_INSTALL_DIR)\"
#!if $(THREADLIB) != $(THREADIMPLIB)
#	@$(CPY) "$(THREADLIB)" "$(SCRIPT_INSTALL_DIR)\"
#!endif
#	@$(CPY) "$(THREADIMPLIB)" "$(LIB_INSTALL_DIR)\"

install-libraries:


#---------------------------------------------------------------------
# Inference rules.  Use batch-mode.
#---------------------------------------------------------------------


{$(GENERICDIR)}.c{$(TMP_DIR)}.obj ::
	@echo Compiling...
	$(cc32) $(cflags) -DTCL_THREADS=1 @<<
$<
<<

{$(WINDIR)}.c{$(TMP_DIR)}.obj ::
	@echo Compiling...
	$(cc32) $(cflags) -DTCL_THREADS=1 @<<
$<
<<


#---------------------------------------------------------------------
# Special case targets
#---------------------------------------------------------------------


$(TMP_DIR)\thread.res : $(WINDIR)\thread.rc
	@echo Compiling resources...
	$(rc32) -fo"$@" -i "$(GENERICDIR)" $(TCL_INCLUDES) -r \
		-DDEBUG=$(DEBUG) -DPACKAGE_MAJOR=$(PACKAGE_MAJOR) \
		-DPACKAGE_MINOR=$(PACKAGE_MINOR) -DPACKAGE_VERSION=\"$(PACKAGE_VERSION)\" \
		$(WINDIR)\thread.rc


#---------------------------------------------------------------------
# Dedependency rules
#---------------------------------------------------------------------


$(WINDIR)\thread.rc : $(WINDIR)\vc\pkg.vc
$(GENERICDIR)\threadCmd.c : $(GENERICDIR)\tclThread.h $(WINDIR)\vc\pkg.vc
$(GENERICDIR)\threadSpCmd.c : $(GENERICDIR)\tclThread.h
$(GENERICDIR)\threadSvCmd.c : $(GENERICDIR)\tclThread.h
$(GENERICDIR)\threadPoolCmd.c : $(GENERICDIR)\tclThread.h
$(GENERICDIR)\threadSvListCmd.c : $(GENERICDIR)\tclThread.h
$(GENERICDIR)\threadSvKeylistCmd.c : $(GENERICDIR)\tclThread.h

#---------------------------------------------------------------------
# Cleanup
#---------------------------------------------------------------------


clean:
	@echo Cleaning non-output build files...
	@$(RMDIR) $(TMP_DIR)

hose: clean
	@echo Deleting output file $(THREADLIB) ...
	@del $(THREADLIB)


.SUFFIXES:
.SUFFIXES: .c