//---------------------------------------------------------------------------
// Copyright (C) 2000 Dallas Semiconductor Corporation, All Rights Reserved.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software"),
// to deal in the Software without restriction, including without limitation
// the rights to use, copy, modify, merge, publish, distribute, sublicense,
// and/or sell copies of the Software, and to permit persons to whom the
// Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
// IN NO EVENT SHALL DALLAS SEMICONDUCTOR BE LIABLE FOR ANY CLAIM, DAMAGES
// OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
// ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
// OTHER DEALINGS IN THE SOFTWARE.
//
// Except as contained in this notice, the name of Dallas Semiconductor
// shall not be used except as stated in the Dallas Semiconductor
// Branding Policy.
//---------------------------------------------------------------------------
//
// mbSHA.h - Memory bank class for the Scratchpad section of SHA iButtons and
//           1-Wire devices.
//
// Version: 2.00
//
// History: 1.02 -> 1.03 Make sure uchar is not defined twice.
//          1.03 -> 2.00  Changed 'MLan' to 'ow'.
//

// Include Files
#include "ownet.h"
#include "mbsha.h"

// general command defines
#define ERASE_SCRATCHPAD_COMMAND_SHA 0xC3
#define WRITE_SCRATCHPAD_COMMAND_SHA 0x0F
#define COPY_SCRATCHPAD_COMMAND_SHA  0x55

// Local defines
#define SIZE_SCRATCH_SHA 32
#define PAGE_LENGTH_SCRATCH_SHA 32

// External functions
extern SMALLINT   owBlock(int,int,uchar *,int);
extern SMALLINT   owAccess(int);
extern void setcrc16(int,ushort);
extern ushort docrc16(int,ushort);


/**
 * Write to the scratchpad page of memory a NV device.
 *
 * @param  startAddr     starting address
 * @param  writeBuf      byte array containing data to write
 * @param  offset        offset into readBuf to place data
 * @param  len           length in bytes to write
 *
 * @return 'true' if writing was successful
 */
SMALLINT writeScratchPadSHA(int portnum, int str_add, uchar *writeBuf, int len)
{
   uchar  raw_buf[37];
   int sendlen = 0;
   int i;
   ushort lastcrc16;

   // select the device
   if (!owAccess(portnum))
   {
      OWERROR(OWERROR_DEVICE_SELECT_FAIL);
      return FALSE;
   }

   // erase the scratchpad
   raw_buf[0] = ERASE_SCRATCHPAD_COMMAND_SHA;

   for(i=1;i<9;i++)
      raw_buf[i] = 0xFF;

   if(!owBlock(portnum,FALSE,raw_buf,9))
   {
      OWERROR(OWERROR_BLOCK_FAILED);
      return FALSE;
   }

   if (((raw_buf[8] & 0x0F0) != 0xA0)
           && ((raw_buf[8] & 0x0F0) != 0x50))
   {
      OWERROR(OWERROR_ERASE_SCRATCHPAD_NOT_FOUND);
      return FALSE;
   }

   // select the device
   if (!owAccess(portnum))
   {
      OWERROR(OWERROR_DEVICE_SELECT_FAIL);
      return FALSE;
   }

   // build block to send
   raw_buf[0] = WRITE_SCRATCHPAD_COMMAND_SHA;
   raw_buf[1] = str_add & 0xFF;
   raw_buf[2] = ((str_add & 0xFFFF) >> 8) & 0xFF;

   for(i=3;i<len+3;i++)
      raw_buf[i] = writeBuf[i-3];

   // check if full page (can utilize CRC)
   if (((str_add + len) % PAGE_LENGTH_SCRATCH_SHA) == 0)
   {
      raw_buf[len+3] = 0xFF;
      raw_buf[len+4] = 0xFF;

      sendlen = len + 5;
   }
   else
      sendlen = len + 3;

   // send block, return result
   if(!owBlock(portnum,FALSE,raw_buf,sendlen))
   {
      OWERROR(OWERROR_BLOCK_FAILED);
      return FALSE;
   }

   // check crc
   if(sendlen == len+5)
   {
      setcrc16(portnum,0);
      for(i=0;i<(len+5);i++)
         lastcrc16 = docrc16(portnum,raw_buf[i]);

      if(lastcrc16 != 0xB001)
      {
         OWERROR(OWERROR_CRC_FAILED);
         return FALSE;
      }
   }

   return TRUE;
}

/**
 * Copy the scratchpad page to memory.
 *
 * portnum       the port number of the port being used for the
 *               1-Wire Network.
 * str_add       starting address
 * len           length in bytes that was written already
 *
 * @return       'true' if the coping was successful.
 */
SMALLINT copyScratchPadSHA(int portnum, int str_add, int len)
{
   uchar raw_buf[6];
   int i;

   // select the device
   if (!owAccess(portnum))
   {
      OWERROR(OWERROR_DEVICE_SELECT_FAIL);
      return FALSE;
   }

   raw_buf[0] = COPY_SCRATCHPAD_COMMAND_SHA;
   raw_buf[1] = str_add & 0xFF;
   raw_buf[2] = ((str_add & 0xFFFF) >> 8) & 0xFF;
   raw_buf[3] = (str_add + len - 1) & 0x1F;

   for(i=4;i<6;i++)
      raw_buf[i] = 0xFF;

   // send block (check copy indication complete)
   if(!owBlock(portnum,FALSE,raw_buf,6))
   {
      OWERROR(OWERROR_BLOCK_FAILED);
      return FALSE;
   }

   if(((raw_buf[5] & 0x0F0) != 0xA0)
         && ((raw_buf[5] & 0x0F0)!= 0x50))
   {
      OWERROR(OWERROR_COPY_SCRATCHPAD_NOT_FOUND);
      return FALSE;
   }

   return TRUE;
}


char *getBankDescriptionScratchSHA(int bank, uchar *SNum)
{
   return "Scratchpad with CRC and auto-hide";
}