000018
[1000]routine:open_rx_input   file:lsetad.c
Routine to open audio input is called but audio_flag says 
input is already open. 
[1001]routine:open_rx_input   file:lsetad.c
The selected output device does not respond. Try another.
[1002]routine:get_buffers        file:buf.c
Routine to allocate memory is called but buffers_flag says
memory is already allocated.    
[1003]routine:open_mouse         file:mouse.c
Routine to open mouse is called but mouse_flag says
mouse is already open.
[1004]routine:close_mouse        file:mouse.c 
Routine to close mouse is called but mouse_flag says
mouse is not open.
[1005]routine:close_audio_input   file:lsetad.c
Error when closing device. 
[1006]routine:close_rx_sndout   file:lsetad.c
Close failed on Rx output from soundcard.
[1007]routine: open_rx_input     file:lsetad.c
Failed to open audio input.
Check sound system !!!
(If OSS is used, start sound with the soundon command.)
Maybe setup file "dsp_uiparm" is incorrect ?
Use U = A/D and D/A setup in main menu.
 (do not forget W = save afterwards to make a new "dsp_uiparm" file)
[1008]routine:open_rx_input  file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_SETFRAGMENT)
[1009]routine: open_rx_input     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_CHANNELS)
[1010]routine: open_rx_input     file:lsetad.c
Could not set desired no of channels for A/D input !!!
Use U = A/D and D/A setup in main menu.
 (do not forget W = save afterwards to make a new "dsp_uiparm" file)
[1011]routine: open_rx_input     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1012]routine: open_rx_input     file:lsetad.c
A/D sampling speed could not be set to desired value (new A/D board )
Initialise sound board properly or use U = A/D and D/A setup in main menu.
 (do not forget W = save afterwards to make a new "dsp_uiparm" file)
[1013]routine: open_rx_input     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETFMT)
[1014]routine: open_rx_input     file:lsetad.c
Could not set little endian format for 16 or 24 bit audio input.
[1015]routine:open_audio_output  file:lsetad.c                      
Routine to open audio output is called but audio_flag says 
output is already open. 
[1016]routine:set_analog_io      file:lsetad.c
Unable to create/open log-file in write mode.
Make sure the file soundboard_init.log does not have incorrect attributes.
(or better, remove the old file)  
[1017]routine:open_audio_output  file:lsetad.c
Could not open device for audio output.
Use U = A/D and D/A setup in main menu to select proper drivers.
 (do not forget W = save afterwards to make a new "dsp_uiparm" file)
[1018]routine:open_audio_output  file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETFRAGMENT)
[1019]routine:open_audio_output  file:lsetad.c
call to ioctl failed . (SNDCTL_DSP_CHANNELS)
[1020]routine:open_audio_output  file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETFMT)
[1021]routine:open_audio_output  file:lsetad.c
Could not open D/A with the specified no of bits.
Probable cause is use of setup parameters from different hardware.
Try to set sound board parameters (U in main menu).
[1022]routine:open_audio_output  file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1023]routine:open_audio_output  file:lsetad.c
Sound card reports unexpected speed value (more than 5% off).
Probable cause is use of setup parameters from different hardware.
Try to set sound board parameters (U in main menu).
More info in the log file: soundboard_init.log
[1024]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1025]routine:open_audio_output  file:lsetad.c
Failed to allocate write buffer
[1026]routine:close_rx_sndout   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_RESET)
[1027]routine:set_analog_io      file:lsetad.c                      
Failed to set no of channels (should never happen)
[1028]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1029]
Failed to open/create the file par_userint or the file par_network.
[1030]routine:check_fft1         file:fft1.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1031]
Internal error.
Please report to SM5BSZ
E-mail  leif.asbrink@mbox300.tele2.se
fax ..46 1691339
[1032]file:fft0.c
Failed to allocate scratch memory.
Make more memory available.
[1033]routine: open_mouse      file:mouse.c      
Failed to allocate scratch memory.
Make more memory available.
[1034]routine: set_vgamode      file:setvga.c      
Failed to allocate scratch memory.
Make more memory available.
[1035]routine: init_font      file:ui.c      
Failed to allocate font memory.
Make more memory available.
[1036]routine: init_wide_graph      file:wide_graph.c      
Failed to allocate memory for waterfall graph.
Make more memory available.
[1037]routine:set_analog_io      file:lsetad.c
Could not close audio device while testing all possible drive routines.
[1038]routine:set_analog_io      file:lsetad.c
Could not open audio device selected for input.
[1039]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_CHANNELS)
[1040]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1041]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1042]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETFMT)
[1043]routine:set_analog_io      file:lsetad.c
Could not set no of channels.
[1044]routine:set_analog_io      file:lsetad.c
Failed to allocate scratch memory.
[1045]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1046]routine: test_rx     file:rxtest.c
Fonts too large for current screen.
Try larger screen or smaller fonts.
[1047]routine: make_gif_file    file:gifsave.c
Could not allocate memory for temporary buffers needed to save screen image.
[1048]routine: make_gif_file    file:gifsave.c
Internal check (should never go wrong, remove test some day.....)
[1049]routine: thread_main_menu   file:menu.c
Could not allocate memory for temporary buffers.
[1050]routine: make_symfit   file:calsub2.c
Could not fit polynomial to data.
Clear old correction function and try less steep desired spectrum. 
[1051]routine: llsq          file:llsq.c
llsq called with too many parameters (programming error)
[1052]routine: init_fft1_filtercorr   file:fft1.c
Error in file dsp_xxx_corr. 
Remove file and make a new file by running the calibration routine.
[1053]routine: init_foldcorr   file:fft1.c
Error in file dsp_xxx_iqcorr.
Remove file and make a new file by running the calibration routine.
[1054]routine: cal_update_ram   file:calsub2.c
Failed to find parameters for old desired spectrum.
Probably error in dsp_xxx_iqcorr.
Use Z to clear in ram, then S to save cleared uncorrupted data
in a new dsp_xxx_iqcorr file.
[1055]routine: init_fft1_filtercorr   file:fft1.c
Failed to get temporary storage (out of ram)
[1056]routine: init_baseband_graph      file:baseband_graph.c      
Failed to allocate memory for baseband graph.
Try to reduce baseband storage time.
Edit parameter file par_wcw, par_cw, par_hsms....
You may also try narrower baseband filter or smaller storage
times for fft1 or fft2. 
[1057]routine:set_fft1_endpoints       file:fft1.c
The calibration curve uses far too small part of the spectrum.
Calibration error or excessive oversampling.
Set sampling speed lower, make desired response wider
or reduce steepness of desired frequency response.
You may have to remove the file dsp_xxx_corr (xxx for current rx mode)
[1058]routine get_last_fragment         file:calibrate.c
Could not get (small) scratch memory.
[1059]routine: init_fft1_filtercorr   file:fft1.c
The save file is corrupted. Can not process old data.
Probable cause: Incorrect calibration file.
Data was probably saved in uncalibrated mode while calibration was
present on disk for another sampling rate or input mode.
[1060]routine: init_foldcorr          file:fft1.c
The save file is corrupted. Can not process old data.
[1061]routine: init_blanker      file:buf.c      
Failed to allocate memory for noise blanker.
[1062]
Calibration file disappeared between program start and attempt to
save raw data in a file or request for calibration from the network.
[1063]routine: init_hires_graph      file:hires_graph.c      
Failed to allocate memory for high resolution graph.
[1064]routine: make_pol_graph        file:pol_graph.c
Failed to create file: par_xxx_pg
[1065]routine save_mousepar_xy       file:mouse.c
Due to a parameter change the placement of parameter
controls on the screen is no longer valid.
Restart program to get auto placement of numeric parameters.
[1066]routine: init_baseband        file:baseband_graph.c
Failed to allocate memory for baseband. 
Try shorter baseband storage time, narrower bandwidth or 
reduce size of earlier processing stages. 
(Could also be an attempt to allocate too many arrays, 
MAX_BASEB_ARRAYS too small)
You may have to remove the par_xxx file (par_wcw, par_ssb,...) 
[1067]routine:set_analog_io      file:lsetad.c
Failed to close audio device while testing all possible drive routines.
[1068]routine:set_analog_io      file:lsetad.c
Failed to open audio device for output while input is open.
[1069]routine:set_analog_io      file:lsetad.c                      
Could not set no of output channels to 1 or 2
[1070]routine:make_audio_output   file:baseband_graph.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1071]routine:set_analog_io      file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETFMTS)
[1072]routine:set_analog_io      file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1073]routine:set_analog_io      file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1074]routine:xz                 file:ui.c                      
Trying to write to debug file (dmp) but file is not open.
(See define of DUMPFILE in vernr.h)
[1075]routine:read_eme_database      file:eme.c                      
Failed to get scratch memory.
[1076]routine:check_fft1         file:fft1.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1077]routine:clear_da      file:wide_graph.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1078]
Failed to get small scratch memory.
[1079]routine:wcw_rx      file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1080]routine:audio_output_routines     file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1081]routine:pc_radio    file:main.c                      
failed to get small scratch memory
[1082]routine:init_wide_graph    file:wide_graph.c                      
failed to get small scratch memory
[1083]routine:make_ad_wttim   file:timing.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1084]routine:wcw_rx           file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1085]routine:wcw_rx           file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1086]routine:open_audio_output  file:lsetad.c
Could not open device for audio output.
[1087]routine:add_mix1_cursor    file:wide_graph.c
The selected frequency is outside the main spectrum.
Zoom out to make the main spectrum cover a larger
frequency range.
[1088]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1089]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1090]routine:check_fft1         file:fft1.c
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1091]routine:wcw_rx      file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1092]routine:modesub_idle      file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1093]routine:set_analog_io   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1094]routine:set_analog_io   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1095]routine:set_analog_io   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1096]routine:set_analog_io   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1097]routine:set_analog_io   file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1098]routine:allocate_fft3mem      file:baseband_graph.c                      
Trying to allocate twice
[1099]routine:open_audio_output      file:lsetad.c                      
Could not set no of channels for output.
[1100]routine:disksave_startstop      file:modesub.c                      
Failed to get a small chunk of scratch memory.
[1101]routine:help_message    file:help.c                      
Failed to get scratch memory to save screen.
[1102]routine:set_analog_io      file:lsetad.c
Could not open audio device selected for input.
[1103]routine:init_spur_spectra   file:spur.c                      
Failed to allocate scratch memory. Try smaller fft sizes or
smaller storage times. 
[1104]routine:wcw_rx      file:wcw.c                      
The A/D device has stopped. This is an exit
for debug purpuses. (rather than just trying a restart)
In case you use a ViBRA16C or similar, try to open as RDWR.
These boards do not have independent input and output.
Please report to leif.asbrink@mbox300.swipnet.se
[1105]routine:complex_lowpass      file:spur.c                      
Internal error. Please report this bug!!!
[1106]routine:make_afc_graph    file:afc.c
Failed to allocate memory for afc.
Try smaller frequency drift and/or smaller frequency lock range and/or
smaller averaging times for transforms and/or afc.
[1107]routine:wcw_rx      file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1108]routine:wcw_rx      file:wcw.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1109]routine:open_rx_input     file:lsetad.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1110]routine: init_foldcorr  file:fft1.c
Could not allocate memory for temporary buffers.
[1111]routine: write_wav_header    file:modesub.c
Failed to position .wav file.
[1112]routine: write_wav_header    file:modesub.c
Failed to write .wav file header.
[1113]routine: make_coherent_graph        file:coherent.c
Failed to create/write file: par_xxx_cg
[1114]routine: write_wav_header    file:modesub.c
Failed to get position position for .wav file start.
[1115] file:main.c
File name for mode parameter file too long in adfile or adwav.
[1116]routine: init_baseband    file:baseband_graph.c
Size of first fft too small for the selected baseband bandwidth.
(fft1 scratch buffer used for baseband processing)
Reduce fft1 bandwidth or reduce baseband bandwidth.
[1117]routine: detect_cw      file:coherent.c
max_cwclk_regions too small. (Change in baseband_graph.c)
[1118]routine: select_namlin    file:modesub.c
Failed to get position for adwav or adfile start.
[1119]routine: select_namlin    file:modesub.c
Failed to set position for adwav or adfile.
[1120]routine: get_parfile_name    file:modesub.c
Parameter file has the same name as the data file. 
This would cause incorrect data when parameters are saved.
Change in adfile or adwav!!
[1121]routine:init_eme_database      file:eme.c                      
Failed to create file for own location.
[1122]routine:init_eme_database      file:eme.c                      
Failed to read allcalls.dta. Excessive line length.
[1123]routine:init_eme_database      file:eme.c
Too many DX stations in database. Increase MAX_DXCALLS.
[1124]routine:init_eme_database      file:eme.c                      
Failed to read dir.skd  Excessive line length or field too long.
[1125]routine:mem      file:modesub.c                      
Tried to allocate an array with size less than zero.
This is a bug. 
If this error repeats when Linrad is started again,
please save all the par_* files and send to SM5BSZ with
a report about what happened.
Then remove the par*_ files and restart. Something was wrong
with your parameters and the error is not likely to repeat. 
E-mail  leif.asbrink@mbox300.swipnet.se
fax ..46 1691339
[1126]routine: make_eme_graph        file:eme.c
Failed to create/write file: par_xxx_eg
[1127]routine:get_numinput_chars         file:mouse.c
Parameter input buffer too small (MAX_TEXTPAR_CHARS)
[1128]routine:init_eme_database      file:eme.c                      
Failed to create file for dx database.
Make sure the directory /home/emedir exists
Linrad will look for these files:
/home/emedir/allcalls.dta
/home/emedir/eme.dta
/home/emedir/dir.skd
Download them from the Internet.
[1129]routine:init_eme_database      file:eme.c
Something went wrong in the eme database creation.
This is a bug of some kind.
[1130]routine:init_eme_graph       file:eme.c
Auto init of eme data was specified, but the dx database
file is missing. Even if empty, it should be present.
Create a new one with "M" in the main menu.
[1131]routine:init_eme_graph       file:eme.c
The eme database file is incorrect.
Create a new one with "M" in the main menu.
[1132]routine:init_eme_graph       file:eme.c
Not enough memory to install eme database.
[1133]routine:init_eme_database      file:eme.c
Failed to create error report file for dx database.
Make sure the directory /home/emedir exists
[1134]routine:set_analog_io         file:lsetad.c
Failed to set input sampling speed.
The device driver is incorrect and the usual work around
was not sucessful.
Check the log file: soundboard_init.log for details
[1135]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1136]routine:memalloc  routine modesub.c
memalloc was called while memalloc_no had a value outside
the range set by memalloc_max.
[1137]routine:remove_iq_notch     file:calsub2.c
Not enough data points to fit. Reduce IQ_FIT_MINFREQ
Make sure to have a PRF well below the new value when collecting
phase and amplitude functions with the pulse generator.
[1138]routine:set_analog_io      file:lsetad.c
Failed to close audio device while testing all possible drive routines.
[1139]routine:set_analog_io      file:lsetad.c
No device found for analog output.
[1140]routine:save_sceen_image   file:gifsave.c       
Failed to create file when trying to save screen in PNG format.
[1141]routine:save_sceen_image   file:gifsave.c       
libpng error. The header file png.h is not compatible with the
version number of libpng. Reinstall libpng or remove png.h to
make Linrad use .GIF files instead of .PNG files.
[1142]routine:save_sceen_image   file:gifsave.c       
Could not allocate/initialize the image information data.
[1143]routine:save_sceen_image   file:gifsave.c       
Could not set error handling.
[1144]routine:network_setup      file:main.c
Could not write network parameter file
[1145]routine:make_ad_wttim      file:timing.c
Network error. Call to ioctl failed (FIONREAD) 
[1146]routine:wcw_rx             file:wcw.c
Network error. Call to ioctl failed (FIONREAD) 
[1147]routine:open_audio_output  file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
[1148]routine:make_wg_file    file:wide_graph.c
Failed to open file for parameter saving. 
Probale cause: The second file specification on the selected
line of adfile is in a non-existing directory 
(or you do not have permission)
[1149]routine:make_da_wttim      file:timing.c                      
call to ioctl failed. (SNDCTL_DSP_GETOSPACE)
Try to select "Close and reopen output" in the soundcard setup.
[1150]routine:ensure_valid_input     file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1151]routine:ensure_valid_input     file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1152]routine:modesub_idle     file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1153]routine:modesub_idle     file:modesub.c                      
call to ioctl failed. (SNDCTL_DSP_GETISPACE)
[1154]routine:ensure_valid_input     file:modesub.c
Network error. Call to ioctl failed (FIONREAD) 
[1155]routine:ensure_valid_input     file:modesub.c
Network error. Call to ioctl failed (FIONREAD) 
[1156]routine:modesub_idle     file:modesub.c
Network error. Call to ioctl failed (FIONREAD) 
[1157]routine:modesub_idle     file:modesub.c
Network error. Call to ioctl failed (FIONREAD) 
[1158]routine pc_radio         file:main.c
Tx test available only when reading from A/D converter. 
This is an error exit indicating read/write on network or disk.
Use Tx test only from main menu with network disabled.
[1159]routine txtest_init       file:txtest.c
The size for txtest_power too small. See buf.c.
[1160]routine txtest_init       file:txtest.c
Window for txtest spectra too small.
Remove or edit par_txtest_wg.
Txtest will work on wideband systems only.
[1161]Insufficient allocation for Morse decode routine. (dashes)
Increase parameter MAX_CW_PARTS in globdef.h
[1162]Insufficient allocation for Morse decode routine. (dashes)
Increase parameter MAX_CW_PARTS in sigdef.h
[1163]The baseband filter is to wide for the baseband window.
Make the baseband filter (the yellow curve) narrower before
trying to resize the baseband window.
[1164]Could not open parameter file.
Probably adfile specified a non-existing directory.
Could also be disk full or something about permissions.
[1165]routine: wcw_rx   filr wcw.c
Call to mlockall failed. Linrad is a real time application and
does not work if swapped to disk. This error can be avoided by
not select to use memory locking which is a good solution if
the reason is lack of privileges. If the reason is shortage
of memory you must select less demanding parameters.
There was not even enough memory before data areas were allocated. 
[1166]Insufficient allocation for Morse decode routine. (spaces)
Increase parameter MAX_CW_PARTS in sigdef.h
[1167]Insufficient allocation for Morse decode routine. (spaces)
Increase parameter MAX_CW_PARTS in sigdef.h
[1168]Call to mlockall(MCL_CURRENT) failed due to inadequate privileges.
You have to be root to deselect swapping to disk.  
[1169]Call to mlockall(MCL_CURRENT) failed.
Maximum number of pages exceeded.
You can avoid calls to mlockall by allowing swapping to disk.
[1170]Call to mlockall(MCL_CURRENT) failed for unknown reasons.
You can avoid calls to mlockall by allowing swapping to disk.
[1171]
ö
[1172]routine:set_analog_io      file:lsetad.c
Could not open second device for input.
[1173]routine:close_audio_input   file:lsetad.c
Error when closing second input device. 
[1174]routine: open_rx_input     file:lsetad.c
Failed to open second device for audio input.
[1175]routine:open_rx_input  file:lsetad.c                      
Second A/D input device.
call to ioctl failed. (SNDCTL_DSP_SETFRAGMENT)
[1176]routine: open_rx_input     file:lsetad.c
Second A/D input device.
call to ioctl failed. (SNDCTL_DSP_SETFMT)
[1177]routine: open_rx_input     file:lsetad.c
Second A/D input device.
Could not set little endian format for 16 or 24 bit audio input.
[1178]routine: open_rx_input     file:lsetad.c
Second A/D input device.
call to ioctl failed. (SNDCTL_DSP_CHANNELS)
[1179]routine: open_rx_input     file:lsetad.c
Second A/D input device.
Could not set desired no of channels for A/D input !!!
[1180]routine: open_rx_input     file:lsetad.c
Second A/D input device.
call to ioctl failed. (SNDCTL_DSP_SPEED)
[1181]routine: open_rx_input     file:lsetad.c
A/D sampling speed could not be set to the same value
for the second device.
[1182]routine: set_analog_io     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_GETCAPS)
[1183]routine: open_rx_input     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETTRIGGER)
[1184]routine: open_rx_input     file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_SETTRIGGER)
[1185]routine:set_analog_io      file:lsetad.c
call to ioctl failed. (SNDCTL_DSP_CHANNELS)
[1186]routine:set_analog_io      file:lsetad.c                      
Failed to set no of channels (should never happen)
[1187]routine:txtest             file:txtest.c
Failed to allocate memory for oscilloscope function.
Try smaller fft2_storage time.
[1188]
ö
[1189]Insufficient allocation for Morse decode routine.
Increase parameter MAX_CW_PARTS in sigdef.h
[1190]Insufficient allocation for Morse decode routine.
Increase parameter MAX_CW_PARTS in sigdef.h
[1191]routine:open_audio_output  file:lsetad.c
Could not open device for audio output.
Check sound system !!!
(If OSS is used, start sound with the soundon command.)
Maybe setup file "dsp_uiparm" is incorrect ?
Use U = A/D and D/A setup in main menu.
 (do not forget W = save afterwards to make a new "dsp_uiparm" file)
[1192]Failed to open Rx A/D input from soundcard.
Device already allocated.
[1193]Could not connect to the SDR-14.
[1194]Could not program the AD6620.
[1195]Could not open /etc/vga/libvga.config
[1196]The size of /etc/vga/libvga.config seems incorrect.
[1197]inpout32.dll was loaded but the functions expected in
it was not found. Replace the inpout32.dll file.
[1198]routine: init_fft1_filtercorr   file:fft1.c
The save file is corrupted. Can not process old data.
Probable cause: Incorrect calibration file.
Data was probably saved in uncalibrated mode while calibration was
present on disk for another sampling rate or input mode.
[1199]The SDR-14 parameter file par_sdr14 is missing.
Use "U=A/D and D/A setup for RX" to create a new file.
[1200]Error in the SDR-14 parameter file par_sdr14.
Use "U=A/D and D/A setup for RX" to create a new file.
[1201]Failed to create a thread for the main menu.
[1202]Error on return (join) from the main menu thread.
[1203]lir_sem_free called for an unitiated semaphore.
[1204]lir_sem_init called for an already initiated semaphore.
[1205]Failed call: ioctl(audio_out,SNDCTL_DSP_RESET,0)
[1206]lir_setpixel(x,y,color) called with x<0
[1207]lir_setpixel(x,y,color) called with y<0
[1208]lir_setpixel(x,y,color) called with x>=screen_width
[1209]lir_setpixel(x,y,color) called with y>=screen_height
[1210]lir_setpixel(x,y,color) called with point outside screen.
[1211]lir_putbox(x,y,w,h,&ptr) called with area outside screen.
[1212]lir_getbox(x,y,w,h,&ptr) called with area outside screen.
[1213]lir_fillbox(x,y,w,h,color) called with area outside screen.
[1214]lir_hline(x1,y,x2,color) called with points outside screen.
[1215]The Win API function QueryPerformanceFrequency() is not supported
by your hardware platform.
[1216]The Win API function QueryPerformanceCounter() returns an error.
[1217]The Win API GetObject returns bmType not zero for memory bitmap.
[1218]Specified sound device is already allocated.
[1219]Specified sound device identifier is out of range.
[1220]No device driver is present.
[1221]Unable to allocate or lock memory.
[1222]Attempted to open with an unsupported waveform-audio format.
[1223]CreateEvent() failed;
[1224]Attempt to pause a thread that was already paused.
[1225]A/D buffer error.
[1226]waveInAddBuffer() failed.
[1227]Failed to open Rx A/D input from soundcard.
Use 'U' in main menu and do not forget to save parameters
with 'W' in the main menu before exit.
[1228]Failed to open Rx A/D input from soundcard (second device).
Use 'U' in main menu and do not forget to save parameters
with 'W' in the main menu before exit.
[1229]CreateEvent() failed;
[1230]routine:init_eme_database      file:eme.c                      
Failed to read CALL3.TXT  Excessive line length or field too long.
[1231]A/D buffer error.
[1232]waveInAddBuffer() failed.
[1233]waveInAddBuffer() failed.
[1234]waveOutOpen() failed.
[1235]CreateEvent() failed;
[1236]Soundcard input buffer allocation error.
Not enough memory available.
[1237]Soundcard output buffer allocation error.
[1238]Unable to open sound device for unknown reasons.
[1239]Linrad has made changes to parameters that affect the main screen. 
In order to make these changes take effect Linrad has to exit.
When you start Linrad again, the new par_userint file will be used.
[1240]MEMORY ERROR (bug inside Linrad).
[1241]ERROR. Not enough memory allocated for timf1 (fft1).
Set a narrower bandwidth to make transforms larger.
[1242]The screen size reported by svgalib is smaller than 640 x 480.
Check your par_userint (or remove it) 
Use vgatest to verify that svgalib works ok.
[1243]The screen reported by svgalib is not 256 colours
Check your par_userint (or remove it) 
Use vgatest to verify that svgalib works ok.
[1244]Failed to open serial port. 
[1245]Soundcard input buffer allocation error.
Call to waveInPrepareHeader failed.
[1246]Parameters say the input should be 32 bit
but the system is compiled without 32 bit support.
Rerun A/D setup from the main menu.
[1247]Soundcard input buffer allocation error.
Call to waveInAddBuffer failed.
[1248]Internal error in Linrad. 
Maybe incorrect value for MAX_SVGA_PALETTE
[1249]Could not get socked for network multicasting.
Verify that your network is setup properly. 
[1250]The network is set up to send raw data in 18 bit format
but the raw data is only 16 bit so you can send no more than 16
bits to the network. Use N in the main menu to change the
network settings (or change A/D converter settings to 24/32 bits)
[1251]The network is set up to send raw data in 24 bit format
but the raw data is only 16 bit so you can send no more than 16
bits to the network. Use N in the main menu to change the
network settings (or change A/D converter settings to 24/32 bits)
[1252]The network parameters differ from those saved
in par_userint. (A change was made with N in the main menu
without saving the par_userint file with W afterwards.)
[1253]Illegal value for network flag in file par_userint.
Use 'N' in the main menu and save ui parameters with 'W' afterwards.
[1254]Too many simultaneous network slaves or subslaves.
(You may increase the value of MAX_FREQLIST in globdef.h)
[1255]Trying to construct illegal sound device file name.
Internal error in Linrad.
[1256]Message from sub-master is a list with less than one frequencies.
[1257]Message from sub-master is a list with too many frequencies.
[1258]Attempt to write outside screen. 
Make screen larger.
[1259]Calibration function incorrect. (fft1_desired is zero)
[1260]Failed to open D/A output for Tx. 
[1261]Failed to allocate memory for tx buffers.
[1262]Failed to set fragment size for tx microphone input.
[1263]Call to WSAStartup(...) failed.
[1264]Write to network socket returned zero.
[1265]Error in file: par_network. a
Use "N=Network setup" in the main menu to create a new file.
[1266]Error in call to setsockopt. Reusing ADDR failed.
[1267]Failed to bind to network receive address
[1268]Error in attempt to use setsockopt() to request 
that the kernel joins a multicast group.
[1269]Waiting for master was interrupted from keyboard.
[1270]Too many simultaneous network slaves.
(You may increase the value of MAX_NETSLAVES in globdef.h)
[1271]Network error. Incorrect setup data received from master.
[1272]Write to network socket returned an error.
[1273]Network connection lost.
[1274]Network read failed.
[1275]Failed bind to socket for network slaves.
[1276]Call to listen(...) on socket for network slaves failed.
[1277]Failed to get serial port options;
[1278]Failed to set serial port options;
[1279]The port number for the serial port is out of range
(1 to 4) in a call to lir_open_serport.
[1280]Call to lir_open_serport failed because of an illegal
baud rate.
[1281]The network is enabled in transmit mode and the network
setup has selected TIMF2 and/or FFT2 output.
The processing mode you tried to enter has disabled the
second fft so there will be no data sent to the network.
Restart Linrad, Use 'T' to disable network transmit
(do not save with W) Then enter the normal processing mode
and enable the second fft.
[1282]routine: cal_filtercorr  file:calibrate.c
Could not allocate memory for temporary buffers.
[1283]Read error for microphone input. 
[1284]The RX input device failed. Linrad does not know how
to stop a thread waiting for response from e.g. an unplugged
USB device so an exit from Linrad is forced.
In case you can repeatedly provoke this error by a reasonable
procedure please post a message on the Linrad mailing list.
[1285]routine:tx_setup      file:lsettx.c
Failed to allocate scratch memory.
[1286]routine:read_txpar_file      file:tx.c
Failed to allocate scratch memory.
[1287]routine:close_tx_sndout   file:lsettx.c
Close failed on Tx output from soundcard.
[1288]routine:close_tx_sndout   file:lsettx.c                      
call to ioctl failed. (SNDCTL_DSP_RESET)
[1289]routine:set_analog_io    file:lsetad.c
No usable device found for loudspeaker output.
[3001]Error reported by check cw.
Read file dmp for details.