#-*-mode: TCL; coding: utf-8;-*- ::msgcat::mcset ca { Percentage Done } {} ::msgcat::mcset ca { SHOW } {} ::msgcat::mcset ca { Percentage Done } {} ::msgcat::mcset ca { - Insert text paragraph: inserts a text paragraph to the current report.\n} {} ::msgcat::mcset ca { - Insert view: add the current view as JPEG image to the report.\n} {} ::msgcat::mcset ca { - Project summary: adds a table with the status of the current project.\n} {} ::msgcat::mcset ca { - Report header, description: to write the title and a description of the report.\n} {} ::msgcat::mcset ca { - Report summary: a list of elements of the current report, which can be edited.} {} ::msgcat::mcset ca { NOTE: Ctrl-a toggles between Join and No join modes.} {} ::msgcat::mcset ca { Percentage: } {} ::msgcat::mcset ca { Select the existing point or create a new one?} {} ::msgcat::mcset ca { %i new lines} {} ::msgcat::mcset ca { %i new points} {} ::msgcat::mcset ca { %i new surfaces} {} ::msgcat::mcset ca { %i new volumes} {} ::msgcat::mcset ca { , pr, in line %d.} {} ::msgcat::mcset ca { , pt, in line %d.} {} ::msgcat::mcset ca { , pt2, in line %d.} {} ::msgcat::mcset ca { , pv, in line %d.} {} ::msgcat::mcset ca { , pv2, in line %d.} {} ::msgcat::mcset ca { , pv3, in line %d.} {} ::msgcat::mcset ca { , pz, in line %d.} {} ::msgcat::mcset ca { , pz2, in line %d.} {} ::msgcat::mcset ca { 0 new entities} {} ::msgcat::mcset ca { 4th argument in info magnitudes should be 0 or 1} {} ::msgcat::mcset ca { Automatic update has been disabled.} {} ::msgcat::mcset ca { but not assigned to any result} {} ::msgcat::mcset ca { but now, using these limits: Min = %.5g, Max = %.5g.} {} ::msgcat::mcset ca { Cannot open file %s.} {} ::msgcat::mcset ca { Color components } {} ::msgcat::mcset ca { conditions} { condicions} ::msgcat::mcset ca { could not be removed} {} ::msgcat::mcset ca { Elapsed time } {} ::msgcat::mcset ca { first.} {} ::msgcat::mcset ca { GUI attenuated} {} ::msgcat::mcset ca { in line %i} {} ::msgcat::mcset ca { in point %i} {} ::msgcat::mcset ca { in surface %i} {} ::msgcat::mcset ca { in volume %i} {} ::msgcat::mcset ca { is now off} {} ::msgcat::mcset ca { is now on} {} ::msgcat::mcset ca { removed.} {} ::msgcat::mcset ca { to current result.} {} ::msgcat::mcset ca { to result } {} ::msgcat::mcset ca { Try again (ESC to leave)} {} ::msgcat::mcset ca {%c Axis set to: '%s'.} {} ::msgcat::mcset ca {%d } {} ::msgcat::mcset ca {%d colours left unchanged.} {} ::msgcat::mcset ca {%d dimensions deleted.} {} ::msgcat::mcset ca {%d dimensions hidden box.} {} ::msgcat::mcset ca {%d dimensions shown box.} {} ::msgcat::mcset ca {%d elems, %d nodes, %d edges.} {} ::msgcat::mcset ca {%d entities changed to current layer %s.} {} ::msgcat::mcset ca {%d filter used} {} ::msgcat::mcset ca {%d Gauss Points per Element.} {} ::msgcat::mcset ca {%d images were entered.} {} ::msgcat::mcset ca {%d linear elements} {} ::msgcat::mcset ca {%d mesh%s read from '%s.msh'.} {} ::msgcat::mcset ca {%d mesh%s read.} {} ::msgcat::mcset ca {%d nodes and %d elements colapsed from set %s.} {} ::msgcat::mcset ca {%d nodes colapsed from set %d. Adjusting results . . .} {} ::msgcat::mcset ca {%d processes running. } {} ::msgcat::mcset ca {%d remote processes running. } {} ::msgcat::mcset ca {%d results read} {} ::msgcat::mcset ca {%d Results read (new format).} {} ::msgcat::mcset ca {%d Results read (old format).} {} ::msgcat::mcset ca {%d results read.} {} ::msgcat::mcset ca {%d set%s read from '%s.bon/dat'.} {} ::msgcat::mcset ca {%d set%s read.} {} ::msgcat::mcset ca {%d surface elements} {} ::msgcat::mcset ca {%d volume elements} {} ::msgcat::mcset ca {%i %ss rejected. They have higher entities} {%i %ss rebutjades. Tenen entititats d'ordre superior} ::msgcat::mcset ca {%i conditions read} {%i condicions llegides} ::msgcat::mcset ca {%i entities out of %i remains selected. Their normal has the same sense as the given one} {%i entitats de %i es mantenen seleccionades. La seva normal té el mateix sentit que la donada} ::msgcat::mcset ca {%i entities rejected. They are in frozen layers} {%i entitats rebutjades. Estan en capes congelades} ::msgcat::mcset ca {%i files written OK} {%i fitxers escrits correctament} ::msgcat::mcset ca {%i lines are not arcs,polylines or straight lines} {%i línees no són arcs, polilínees o línees rectes} ::msgcat::mcset ca {%i lines are not NURBS lines} {} ::msgcat::mcset ca {%i lines divided and %i new points. Leaving} {} ::msgcat::mcset ca {%i lines have been rejected. They don't belong to selected surfaces} {%i línees han estat rebutjades. No pertanyen a les superfícies sel.leccionades} ::msgcat::mcset ca {%i lines have been rejected. They have COON surfaces over them} {} ::msgcat::mcset ca {%i lines not have 2 surfaces over them or are tangents} {} ::msgcat::mcset ca {%i materials read} {%i materials llegits} ::msgcat::mcset ca {%i polylines have conditions over them} {%i polilínees tenen condicions sobre elles} ::msgcat::mcset ca {%i polylines have higher entities over them} {%i polilínees tenen entititats d'ordre superior sobre elles} ::msgcat::mcset ca {%i surfaces are not NURBS surfaces} {} ::msgcat::mcset ca {%i surfaces are not NURBS untrimmed surfaces} {} ::msgcat::mcset ca {%i surfaces are not planar or coon surfaces} {} ::msgcat::mcset ca {%i surfaces have been rejected. Enter number of cells to assign to lines} {} ::msgcat::mcset ca {%i surfaces rejected. They are not 4-sided surfaces or accepted NURBS} {} ::msgcat::mcset ca {%i volumes rejected. They can't be structured. It needs to have 6 boundary surfaces. Each of them must be able to be structured and must have 4 sides} {} ::msgcat::mcset ca %s {} ::msgcat::mcset ca {%s %g ( %d res.)} {} ::msgcat::mcset ca {%s %s modified} {} ::msgcat::mcset ca {%s ,Edge line=%d} {} ::msgcat::mcset ca {%s ,Surface num %d} {} ::msgcat::mcset ca {%s ,trimming sup =%d} {} ::msgcat::mcset ca {%s created.} {} ::msgcat::mcset ca {%s Entities} {} ::msgcat::mcset ca {%s is deleted.} {} ::msgcat::mcset ca {%s Layer} {} ::msgcat::mcset ca {%s modified} {} ::msgcat::mcset ca {%s num=%i doesn't exist.You can continue (ESC to end)} {%s num=%i no existeix. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {%s num=%i is in the back of its layer '%s'. You can continue (ESC to end)} {} ::msgcat::mcset ca {%s num=%i is inside the frozen layer '%s'. You can continue (ESC to end)} {} ::msgcat::mcset ca {%s plane(s) saved into '%s'.} {} ::msgcat::mcset ca {%s read} {} ::msgcat::mcset ca {%s To} {} ::msgcat::mcset ca {%s wrong surfaces} {} ::msgcat::mcset ca {%s. Can continue (ESC to leave)} {} ::msgcat::mcset ca {%s: %s not correct only these format specifiers are accepted: %%diouxXeEfgGc, but not %%s or %%n} {} ::msgcat::mcset ca {%s: Error code %d, %s.} {} ::msgcat::mcset ca {%s: Error code %d.} {} ::msgcat::mcset ca {%s: From} {} ::msgcat::mcset ca {%s: num=%i ON:%i Freeze:%i Color:%i %i %i} {%s: num=%i connectada:%i congelada:%i color:%i %i %i} ::msgcat::mcset ca &Cancel {} ::msgcat::mcset ca &Directory {} ::msgcat::mcset ca &OK {} ::msgcat::mcset ca &Open {} ::msgcat::mcset ca &Save {} ::msgcat::mcset ca &Selection {} ::msgcat::mcset ca {'%s' FEMAP file imported OK} {} ::msgcat::mcset ca {'%s' TECPLOT file imported OK} {} ::msgcat::mcset ca {'%s' will be used as Background Image.} {} ::msgcat::mcset ca {'%s' will be used as Environment Image.} {} ::msgcat::mcset ca {'%s' will be used as Point Image.} {} ::msgcat::mcset ca {'%s' will be used as Texture Image.} {} ::msgcat::mcset ca {')' expected} {} ::msgcat::mcset ca {'=' expected} {} ::msgcat::mcset ca 'analisis_name' {} ::msgcat::mcset ca {'analysis_name' 'step_value'} {} ::msgcat::mcset ca {'analysis_name' 'step_value' 'result_name'} {} ::msgcat::mcset ca {'analysis_name' 'step_value' 'result_name' 'component_name'} {} ::msgcat::mcset ca {'Mesh copy' color changed to user color %s.} {} ::msgcat::mcset ca {'Mesh copy' color left unchanged} {} ::msgcat::mcset ca {'Mesh copy' will user its own colors the next time it is created.} {} ::msgcat::mcset ca {'only points' can only be meshed with Mesh3d. Trying} {} ::msgcat::mcset ca 'result_name' {} ::msgcat::mcset ca {'result_name' [ 'component_name'] 'analisis_name' 'setp_value'} {} ::msgcat::mcset ca 'result_view_type' {} ::msgcat::mcset ca {'result_view_type' 'analysis_name' 'step_value'} {} ::msgcat::mcset ca {'result_view_type' 'result_name' 'analysis_name' 'step_value'} {} ::msgcat::mcset ca {'Use Return'} {} ::msgcat::mcset ca {( if present, mouse wheel zooms) Enter 1st point} {} ::msgcat::mcset ca {( y/n): } {} ::msgcat::mcset ca {(if present, mouse wheel zooms dynamically) Enter 1st point} {} ::msgcat::mcset ca {*** IGES Type 143: fail continuity in contour %d} {} ::msgcat::mcset ca {*** Line not created IGES_%d D#%d} {} ::msgcat::mcset ca {*** Surface not created IGES_%d D#%d} {} ::msgcat::mcset ca {*Format must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {*Remove must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {*Set or *add must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {*SetFormatForceWidth must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {*SetFormatStandard must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {+ render} {} ::msgcat::mcset ca {+ rotation} {} ::msgcat::mcset ca {+ zoom/pan} {} ::msgcat::mcset ca {, jumping till 'end values'\n} {} ::msgcat::mcset ca {, should be } {} ::msgcat::mcset ca {--------------- MESH COMPONENT %d --------------- } {} ::msgcat::mcset ca {---Type of conical curve unidentified IGES_%d D#%d} {} ::msgcat::mcset ca {-1 Incorrect format} {} ::msgcat::mcset ca {-Define new...-} {} ::msgcat::mcset ca -Global- {} ::msgcat::mcset ca {-Relative center-} {} ::msgcat::mcset ca {-Relative last-} {} ::msgcat::mcset ca {. Leaving} {} ::msgcat::mcset ca {. Try again} {. Intenti-ho de nou} ::msgcat::mcset ca {. Try again (ESC to leave)} {. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {1 new NURBS line created and %i new points. Leaving} {1 nova línea NURBS creada i %i punts nous. Sortint} ::msgcat::mcset ca {1 new spline created and %i new points. Leaving} {1 nova línea NURBS creada i %i punts nous. Sortint} ::msgcat::mcset ca {2 points} {} ::msgcat::mcset ca {2 Triangles} {} ::msgcat::mcset ca {2D surface %s finished} {} ::msgcat::mcset ca {2D surface number %d not exists. Try again} {} ::msgcat::mcset ca 2Dumg {} ::msgcat::mcset ca {3 points} {} ::msgcat::mcset ca {4 sides} {} ::msgcat::mcset ca {4 Triangles} {} ::msgcat::mcset ca {8 sides} {} ::msgcat::mcset ca {8 Triangles} {} ::msgcat::mcset ca 320x240 {} ::msgcat::mcset ca {352x240 (VCD-NTSC)} {} ::msgcat::mcset ca 352x288 {} ::msgcat::mcset ca {352x288 (VCD-PAL)} {} ::msgcat::mcset ca 512x384 {} ::msgcat::mcset ca 640x480 {} ::msgcat::mcset ca 720x576 {} ::msgcat::mcset ca 800x600 {} ::msgcat::mcset ca {: found %d of 10 parameters} {} ::msgcat::mcset ca {: wrong parameter} {} ::msgcat::mcset ca {: wrong parameter, expected step value} {} ::msgcat::mcset ca {: wrong parameters} {} ::msgcat::mcset ca {: wrong parameters, expected two int's ( from_prog, anal_type)} {} ::msgcat::mcset ca {::CreateBoundaries Error: edge %d in element %d doesn't exist} {} ::msgcat::mcset ca {::CreateBoundaries Error: element %d doesn't exist.} {} ::msgcat::mcset ca {::CreateBoundaries Fail to create a line in skeleton.} {} ::msgcat::mcset ca {::CreateFacesAfterLines Error: strange phenomena in element adyacents. Elem num %d.} {} ::msgcat::mcset ca {::CreateFacesAfterLines Error: there's an isolated element; num %d} {} ::msgcat::mcset ca {::CreateLines ERROR: creating other point over node %d} {} ::msgcat::mcset ca {::CreateLines Error: element %d doesn't exist.} {} ::msgcat::mcset ca {::CreateLines ERROR: not closed line with stt=end} {} ::msgcat::mcset ca {::CreateLines ERROR: the node %d should have a point.} {} ::msgcat::mcset ca {::CreateLines ERROR: creating other point over node %d} {} ::msgcat::mcset ca {::CreateLines Error: element %d doesn't exist.} {} ::msgcat::mcset ca {::CreateLines ERROR: the node %d should have a point.} {} ::msgcat::mcset ca ::ImproveGiDMesh {} ::msgcat::mcset ca {\"To see volume mesh boundaries use command:\n meshing->Boundaries\"} {} ::msgcat::mcset ca {_gidaccesvalue: interval number %d out of range} {} ::msgcat::mcset ca {a filename must be supplied, } {} ::msgcat::mcset ca {A graphical window to test the cordal error is given} {} ::msgcat::mcset ca {A layer name must be written before selecting 'New'} {} ::msgcat::mcset ca {A line can be selected to obtain its length and curvature radius} {} ::msgcat::mcset ca {A Numerical value must be entered.} {} ::msgcat::mcset ca {A problem type must be selected before} {} ::msgcat::mcset ca {a ResultName must be supplied, } {} ::msgcat::mcset ca {a ResultRangesTable has been already specified.\n} {} ::msgcat::mcset ca {A single word must be entered} {} ::msgcat::mcset ca {A single word must be entered.} {} ::msgcat::mcset ca {a TableName must be supplied, } {} ::msgcat::mcset ca Abort {} ::msgcat::mcset ca About Sobre... ::msgcat::mcset ca {About GiD report} {} ::msgcat::mcset ca Accelerator {} ::msgcat::mcset ca {Accelerator is already assigned to this macro} {} ::msgcat::mcset ca Accept {} ::msgcat::mcset ca {Accept Data} {} ::msgcat::mcset ca {Accepted new %s preferences} {} ::msgcat::mcset ca Accumulated {} ::msgcat::mcset ca ACIS {} ::msgcat::mcset ca {ACIS file must be } {} ::msgcat::mcset ca {ACIS read} {} ::msgcat::mcset ca {ACIS_PLANE::CreateSurfaceGID, Surface not created. %s} {} ::msgcat::mcset ca Actions {} ::msgcat::mcset ca Active {} ::msgcat::mcset ca {ActualizeProcInfo: Unexpected state=%s} {} ::msgcat::mcset ca Add {} ::msgcat::mcset ca {Add meshes} {} ::msgcat::mcset ca {Add sets} {} ::msgcat::mcset ca {Added %d %s(s) to the selection ( %d). Enter more %s. (ESC to leave)} {} ::msgcat::mcset ca {Added %i items in the filter} {Afegits %i camps en el filtre} ::msgcat::mcset ca {Added %i new %ss to the selection. Enter more %ss. (ESC to leave)} {%i noves %ss afegides a la sel.lecció. Entri més %ss (ESC per sortir)} ::msgcat::mcset ca {Added %i new lines to the selection. Enter more} {Afegides %i línees noves a la selecció. Entri'n més} ::msgcat::mcset ca {Added Node %d to the selection. Enter more Nodes. (ESC to leave)} {} ::msgcat::mcset ca {Added Nodes %d:%d to the selection. Enter more Nodes. (ESC to leave)} {} ::msgcat::mcset ca {Added one hole to the surface. Continue entering lines to define more holes (ESC to leave)} {} ::msgcat::mcset ca {Adding 2D surfaces} {} ::msgcat::mcset ca {Adding ascii results} {} ::msgcat::mcset ca {Adding binary data} {} ::msgcat::mcset ca {Adding binary mesh} {} ::msgcat::mcset ca {Adding binary post-process file stopped by user request.} {} ::msgcat::mcset ca {Adding binary results} {} ::msgcat::mcset ca {Adding Elements} {} ::msgcat::mcset ca {Adding graphic:} {} ::msgcat::mcset ca {Adding original points} {} ::msgcat::mcset ca {Adding points} {} ::msgcat::mcset ca {Adding texture set} {} ::msgcat::mcset ca {Adding volumes} {} ::msgcat::mcset ca Advanced {} ::msgcat::mcset ca {AdvancingFrontPoints:: Unexpected type of element %d} {} ::msgcat::mcset ca {After #N# is necessary the Number of subFields. Try again} {Després de #N# es necessari el número de subcamps. Intenti-ho de nou} ::msgcat::mcset ca {After -b it is necessary a batch file name} {} ::msgcat::mcset ca {After -c it is necessary a config file name or word 'none'} {} ::msgcat::mcset ca {After -w it is necessary a Window id} {} ::msgcat::mcset ca {after info conditions 'Condition name' it is necessary:(nothing), mesh, geometry, otherfields or book } {} ::msgcat::mcset ca {after info materials 'Material name' it is necessary:(nothing), otherfields or book} {} ::msgcat::mcset ca {After intersection, 2 lines converted to %i lines. Can continue} {} ::msgcat::mcset ca {After keyword 'layer:' it is necessary the layer name} {} ::msgcat::mcset ca {After pressing this button, some actions can be performed in the program and they will be recorded in the macro. Press later the create new button.} {} ::msgcat::mcset ca {After Starting the animation, each redraw will be saved as a Animation Step.} {} ::msgcat::mcset ca After: {} ::msgcat::mcset ca {After: %d faces. Deleted %d unitary, %d binary.} {} ::msgcat::mcset ca {Al results} {} ::msgcat::mcset ca {algorithm mode ?key? data} {} ::msgcat::mcset ca Align {} ::msgcat::mcset ca All Tot ::msgcat::mcset ca {All %d elements have been moved to the set '%s', and matched its element type.} {} ::msgcat::mcset ca {All %s} {} ::msgcat::mcset ca {All %s on} {} ::msgcat::mcset ca {All book %s} {} ::msgcat::mcset ca {All conditions} {} ::msgcat::mcset ca {All cut sets are deleted} {} ::msgcat::mcset ca {All cut sets are off} {} ::msgcat::mcset ca {All cut sets are on} {} ::msgcat::mcset ca {All data information (materials, conditions, data) will be lost} {} ::msgcat::mcset ca {All data information(materials,conditions,data) will be lost.} {} ::msgcat::mcset ca {All data information(materials,conditions,data) will be lost. OK?} {Tota la informació de materials, condicions i dades es perdrà. Endavant?} ::msgcat::mcset ca {All data information(materials,conditions,data) will be lost. OK? (Yes/ESC)} {Tota la informació de materials, condicions i dades es perdrà. Endavant? (Si/ESC)} ::msgcat::mcset ca {All done} {} ::msgcat::mcset ca {All entities} {} ::msgcat::mcset ca {All entities have normal in the same sense given by normal} {Totes les entitats tenen normal en el mateix sentit que el donat per la normal} ::msgcat::mcset ca {All entities unassigned in all intervals.} {} ::msgcat::mcset ca {All entities will be drawn (ESC to leave)} {} ::msgcat::mcset ca {All files deleted} {} ::msgcat::mcset ca {All Geometry entities number will be changed. No problems with conditions. Continue?} {Totes els números de les entitats geomètriques canviarà. Cap problema amb les condicions. Continuar?} ::msgcat::mcset ca {ALL graf's pattern factors changed to %d.} {} ::msgcat::mcset ca {All in} {Tot en ...} ::msgcat::mcset ca {All Lines} {} ::msgcat::mcset ca {All lines rejected} {} ::msgcat::mcset ca {All MESH entities unassigned in all intervals.} {} ::msgcat::mcset ca {All nodes and elements numbers will be changed. No problems with conditions. Continue?} {Totes els números dels nodes i elements canviarà. Cap problema amb les condicions. Continuar?} ::msgcat::mcset ca {All Off} {} ::msgcat::mcset ca {All On} {} ::msgcat::mcset ca {All results} {} ::msgcat::mcset ca {All selected entities} {} ::msgcat::mcset ca {All sets are off} {} ::msgcat::mcset ca {All Sets for All Steps} {} ::msgcat::mcset ca {All Sets for This Step} {} ::msgcat::mcset ca {All surface sets are deleted} {} ::msgcat::mcset ca {All Surface sets are on} {} ::msgcat::mcset ca {All the interior vectors will be drawn.} {} ::msgcat::mcset ca {All this condition} {} ::msgcat::mcset ca {All transformations deleted.} {} ::msgcat::mcset ca {All types} {Tots els tipus} ::msgcat::mcset ca {All volume sets are deleted} {} ::msgcat::mcset ca {All volume sets are off} {} ::msgcat::mcset ca {All volume sets are on} {} ::msgcat::mcset ca {All windows} {} ::msgcat::mcset ca {allocating memory for more results.e.} {} ::msgcat::mcset ca {allocating memory for more results.m%d.} {} ::msgcat::mcset ca {Allow automatic structured} {} ::msgcat::mcset ca alphabetic {} ::msgcat::mcset ca {alphabetic order} {} ::msgcat::mcset ca {Already selected} {} ::msgcat::mcset ca {Also lower entities} {} ::msgcat::mcset ca Always {} ::msgcat::mcset ca {Always geometry} {} ::msgcat::mcset ca {Always on top} {} ::msgcat::mcset ca {AMBIENT component color} {} ::msgcat::mcset ca {Ambiguous book:} {} ::msgcat::mcset ca {Ambiguous condition:} {} ::msgcat::mcset ca {Ambiguous variable name %s. Try again} {} ::msgcat::mcset ca {an AnalysisName must be supplied, } {} ::msgcat::mcset ca {An entity name is needed as answer. Try again (ESC to leave)} {Un nom d'entitat es necessita com a resposta. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {An entity type is needed as answer. Try again (ESC to leave)} {} ::msgcat::mcset ca {An error ocurred} {} ::msgcat::mcset ca {an ResultRangesTableName must be supplied.\n} {} ::msgcat::mcset ca {Analisys '%s' not started. The connection is closed before the data send is concluded} {} ::msgcat::mcset ca Analysis {} ::msgcat::mcset ca {Analysis has finished} {} ::msgcat::mcset ca {Analysis has finished: results stored in the server.} {} ::msgcat::mcset ca Analysis: {} ::msgcat::mcset ca {and a step first.} {} ::msgcat::mcset ca {And now the} {} ::msgcat::mcset ca {and separated by ',', ';', or '.'\n} {} ::msgcat::mcset ca Angle Angle ::msgcat::mcset ca {Angle must be positive. Enter angle to make division} {} ::msgcat::mcset ca {Angle not valid} {} ::msgcat::mcset ca Angle(degrees) {} ::msgcat::mcset ca {Angle: From} {} ::msgcat::mcset ca Angle=%s {} ::msgcat::mcset ca Animate {} ::msgcat::mcset ca {Animate scene} {} ::msgcat::mcset ca {Animation Controls} {} ::msgcat::mcset ca {Animation controls} {} ::msgcat::mcset ca {Animation script} {} ::msgcat::mcset ca {Animation write} {} ::msgcat::mcset ca Apply {} ::msgcat::mcset ca {Applying textura, done} {} ::msgcat::mcset ca {Applying texture set to 4 sided set} {} ::msgcat::mcset ca Arc Arc ::msgcat::mcset ca {Arc tangents} {} ::msgcat::mcset ca ArcLine {} ::msgcat::mcset ca {Arcs swaped. Leaving} {Arcs invertits. Sortint} ::msgcat::mcset ca {Are you sure to delete %1\$s %2\$s?} {} ::msgcat::mcset ca {Are you sure to delete table '%s' from window?} {} ::msgcat::mcset ca {Are you sure to delete\n custom render '%s'?} {} ::msgcat::mcset ca {Are you sure to do an ENDLESS animation AND %s, so that the disk will be filled?} {} ::msgcat::mcset ca {Are you sure to modify external materials file?} {} ::msgcat::mcset ca {Are you sure to modify the current materials?} {} ::msgcat::mcset ca {Are you sure to redefine macro '%s'?} {} ::msgcat::mcset ca {Are you sure you want to delete '%s'?} {} ::msgcat::mcset ca {Are you sure you want to delete All Cut Sets?} {} ::msgcat::mcset ca {Are you sure you want to delete All Surface Sets?} {} ::msgcat::mcset ca {Are you sure you want to delete All Volume Sets?} {} ::msgcat::mcset ca {Are you sure you want to delete the remote results of process: '%1\$s' started at %2\$s ?} {} ::msgcat::mcset ca {Are you sure you want to kill the process: '%1\$s' started at %2\$s ?} {} ::msgcat::mcset ca {Are you sure you want to QUIT?} {} ::msgcat::mcset ca {Are you sure you want to QUIT? y/n} {} ::msgcat::mcset ca {Are you sure you want to use %s ms as delay?} {} ::msgcat::mcset ca {ASCII boundaries} {} ::msgcat::mcset ca {ASCII files} {} ::msgcat::mcset ca {Assign unstruct. sizes} {} ::msgcat::mcset ca {Automatic 6-sided volumes} {Volums 6 costats auto} ::msgcat::mcset ca {Background Image} {} ::msgcat::mcset ca {Background Mesh} {} ::msgcat::mcset ca {Batch file} {} ::msgcat::mcset ca {Binary results} {} ::msgcat::mcset ca BMP {} ::msgcat::mcset ca Boundaries Contorn ::msgcat::mcset ca {BoundImg to BoundSet} {} ::msgcat::mcset ca {By contour} {} ::msgcat::mcset ca {By cordal error} {Per error cordal} ::msgcat::mcset ca {By LinePoints} {} ::msgcat::mcset ca {By Points} {} ::msgcat::mcset ca Calculate Calcular ::msgcat::mcset ca {Calculate remote} {} ::msgcat::mcset ca {Calculation file} {} ::msgcat::mcset ca Calculator Calculadora ::msgcat::mcset ca {Cancel mesh} {Cancel.lar malla} ::msgcat::mcset ca {Cancel process} {} ::msgcat::mcset ca Change {} ::msgcat::mcset ca {Change light dir} {} ::msgcat::mcset ca {Change light vector} {} ::msgcat::mcset ca Circle {} ::msgcat::mcset ca {Clipboard copy} {} ::msgcat::mcset ca Collapse {} ::msgcat::mcset ca {Collapse nodes} {} ::msgcat::mcset ca {Concentrate elements} {} ::msgcat::mcset ca Cone {} ::msgcat::mcset ca Contact Contacte ::msgcat::mcset ca Contextual {De contexte} ::msgcat::mcset ca {Convert to NURBS} {Convertir a NURBS} ::msgcat::mcset ca {Coordinates window} {Finestra coordenades} ::msgcat::mcset ca {Correct sizes} {Corretgir tamanys} ::msgcat::mcset ca {Cover mesh} {} ::msgcat::mcset ca {Create arc} {Crear arc} ::msgcat::mcset ca {Create Circle} {} ::msgcat::mcset ca {Create Cone} {} ::msgcat::mcset ca {Create Cylinder} {} ::msgcat::mcset ca {Create line} {Crear linea} ::msgcat::mcset ca {Create nurbs line} {Crear linea NURBS} ::msgcat::mcset ca {Create NURBS surface} {} ::msgcat::mcset ca {Create Object:\n Rectangle\n Polygon\n Circle\n Sphere\n Cylinder\n Cone\n Prism\n Thorus} {} ::msgcat::mcset ca {Create planar surface} {Crear superf plana} ::msgcat::mcset ca {Create polygon} {} ::msgcat::mcset ca {Create polyline} {Crear polilinea} ::msgcat::mcset ca {Create Prism} {} ::msgcat::mcset ca {Create Sphere} {} ::msgcat::mcset ca {Create volume} {Crear volum} ::msgcat::mcset ca {CreateArestInClosedNurbSurface:: Increase MAXNUMCUTPOINTS} {} ::msgcat::mcset ca {Current results} {} ::msgcat::mcset ca Cut {} ::msgcat::mcset ca {Cut sets} {} ::msgcat::mcset ca Cylinder {} ::msgcat::mcset ca Data Dades ::msgcat::mcset ca Default Defecte ::msgcat::mcset ca {Delete elements} {} ::msgcat::mcset ca {Delete Lonely Nodes} {} ::msgcat::mcset ca Dimension {} ::msgcat::mcset ca Distance Distancia ::msgcat::mcset ca Divide Dividir ::msgcat::mcset ca Do {} ::msgcat::mcset ca {Do cuts} {} ::msgcat::mcset ca {Draw Higher} {} ::msgcat::mcset ca {Draw Normals} {} ::msgcat::mcset ca {Draw sizes} {} ::msgcat::mcset ca DXF {} ::msgcat::mcset ca Dynamic Dinamic ::msgcat::mcset ca Edges {} ::msgcat::mcset ca Edit Editar ::msgcat::mcset ca {Edit mesh} {} ::msgcat::mcset ca {Edit NURBS line} {Editar linea NURBS} ::msgcat::mcset ca {Edit NURBS surface} {Editar superf NURBS} ::msgcat::mcset ca {Edit polyline} {Editar polilinea} ::msgcat::mcset ca {Edit SurfMesh} {Editar 'malla-superf'} ::msgcat::mcset ca {Element type} {Tipus d'element} ::msgcat::mcset ca {Enter the A, B, C and D of the plane equation: Ax + By + Cz + D = 0. Enter A:} {} ::msgcat::mcset ca {Enter value window} {} ::msgcat::mcset ca EntityType {} ::msgcat::mcset ca {EPS Screen} {} ::msgcat::mcset ca {EPS Vectorial} {} ::msgcat::mcset ca {Error in DuplicarEntidades. Unknown line type} {} ::msgcat::mcset ca {Error in DuplicarEntidades. Unknown surface type} {} ::msgcat::mcset ca {Error Reading geometry. File not OK. Some data could be saved} {} ::msgcat::mcset ca {Error reading material, bad line '%s'} {} ::msgcat::mcset ca {Error window} {} ::msgcat::mcset ca {Error: in %1\$s command, source file %2\$s not exist} {} ::msgcat::mcset ca {Explode polyline} {Explotar polilinea} ::msgcat::mcset ca Export {} ::msgcat::mcset ca Fast {} ::msgcat::mcset ca Files Fitxers ::msgcat::mcset ca {Fill Surfaces} {} ::msgcat::mcset ca {Fit screen} {} ::msgcat::mcset ca {Flip horiz.} {} ::msgcat::mcset ca {Flip vert.} {} ::msgcat::mcset ca Frame Extensio ::msgcat::mcset ca Generate Generar ::msgcat::mcset ca {Geom & view operations} {} ::msgcat::mcset ca Geometry Geometria ::msgcat::mcset ca {GiD mesh} {} ::msgcat::mcset ca GIF {} ::msgcat::mcset ca Graph {} ::msgcat::mcset ca Hole Forat ::msgcat::mcset ca {Hole NURBS surface} {} ::msgcat::mcset ca Id Id ::msgcat::mcset ca IGES {} ::msgcat::mcset ca In Endins ::msgcat::mcset ca {Insert GiD geometry} {} ::msgcat::mcset ca Intersection Interseccio ::msgcat::mcset ca Isometric {} ::msgcat::mcset ca {It creates a new customized render mode} {} ::msgcat::mcset ca {It deletes the selected customized render mode.} {} ::msgcat::mcset ca {Job succesfully printed or queued.} {} ::msgcat::mcset ca Join Ajuntar ::msgcat::mcset ca {Join lines end points} {} ::msgcat::mcset ca JPEG {} ::msgcat::mcset ca Label Etiqueta ::msgcat::mcset ca Layers Capes ::msgcat::mcset ca Line Línea ::msgcat::mcset ca {line num %i. Points: %i,%i} {} ::msgcat::mcset ca Line-line {} ::msgcat::mcset ca List Llistar ::msgcat::mcset ca {List entities} {Llistar entitats} ::msgcat::mcset ca Macros {} ::msgcat::mcset ca Mass {} ::msgcat::mcset ca {Merge (ASCII)} {} ::msgcat::mcset ca Mesh Malla ::msgcat::mcset ca {Mesh criteria} {Criteris de malla} ::msgcat::mcset ca {Mesh quality} {} ::msgcat::mcset ca {Mesh view} {Veure malla} ::msgcat::mcset ca Meshing {} ::msgcat::mcset ca {Move node} {} ::msgcat::mcset ca {Move Point} {Moure punt} ::msgcat::mcset ca {Move Screen Objects} {} ::msgcat::mcset ca {Multiple lines} {} ::msgcat::mcset ca {Multiple surfaces} {} ::msgcat::mcset ca {Multiple windows} {} ::msgcat::mcset ca {NASTRAN mesh} {} ::msgcat::mcset ca {Near point} {} ::msgcat::mcset ca {New point} {Punt nou} ::msgcat::mcset ca Next Seguent ::msgcat::mcset ca Nice {} ::msgcat::mcset ca {No Mesh} {No malla} ::msgcat::mcset ca {Nodes in Sets} {} ::msgcat::mcset ca {Num Divisions} {} ::msgcat::mcset ca {NURBS line} {Linea NURBS} ::msgcat::mcset ca {NURBS surface} {Superficie NURBS} ::msgcat::mcset ca Object {} ::msgcat::mcset ca {Object axes} {Coord objecte} ::msgcat::mcset ca Off Desactivar ::msgcat::mcset ca OK {} ::msgcat::mcset ca On Activar ::msgcat::mcset ca {ON layers} {} ::msgcat::mcset ca {One binary file} {} ::msgcat::mcset ca {Only points} {nomes punts} ::msgcat::mcset ca Open {} ::msgcat::mcset ca Options Opcions ::msgcat::mcset ca Out Enfora ::msgcat::mcset ca {Page Setup} {} ::msgcat::mcset ca Pan Desplaçament ::msgcat::mcset ca {Pan dynamic} {} ::msgcat::mcset ca {Parallel Lines} {} ::msgcat::mcset ca Parameter {} ::msgcat::mcset ca {Parametric line} {} ::msgcat::mcset ca Parasolid {} ::msgcat::mcset ca Perspective Perspectiva ::msgcat::mcset ca {Plane XY (Original)} {} ::msgcat::mcset ca {Plane XZ} {} ::msgcat::mcset ca {Plane YZ} {} ::msgcat::mcset ca PNG {} ::msgcat::mcset ca Polygon {} ::msgcat::mcset ca Polyline Polilinea ::msgcat::mcset ca Polylines {} ::msgcat::mcset ca Post {} ::msgcat::mcset ca {Post information} {} ::msgcat::mcset ca Postprocess Postproces ::msgcat::mcset ca Preprocess Preprocés ::msgcat::mcset ca Previous Previ ::msgcat::mcset ca {Print to file} {Imprimir a fitxer} ::msgcat::mcset ca Prism {} ::msgcat::mcset ca {problems in line %i. It has more than 4 surfaces around} {} ::msgcat::mcset ca {Problems in surface %i. Marked as structured and it cannot be} {} ::msgcat::mcset ca {PropertyToPost value incorrect %s, must be one of: Material, Layer.} {} ::msgcat::mcset ca {PS Screen} {} ::msgcat::mcset ca {PS Vectorial} {} ::msgcat::mcset ca {Quadratic elements} {Elements quadratics} ::msgcat::mcset ca Quadratic9 Quadràtic9 ::msgcat::mcset ca Radius {} ::msgcat::mcset ca Read Llegir ::msgcat::mcset ca {Read batch window} {Finestra ficher comandes} ::msgcat::mcset ca {Reading ACIS} {} ::msgcat::mcset ca {Real size} {} ::msgcat::mcset ca Rectangle {} ::msgcat::mcset ca Redraw Redibuixar ::msgcat::mcset ca Register Registrar-se ::msgcat::mcset ca {Relative Length} {} ::msgcat::mcset ca Render Il.luminacio ::msgcat::mcset ca Renumber Renumerar ::msgcat::mcset ca Repair Reparar ::msgcat::mcset ca {Reset mesh data} {Netejar dades malla} ::msgcat::mcset ca Rotate Rotacio ::msgcat::mcset ca {Rotate trackball} {Rotacio de bola} ::msgcat::mcset ca Save Salvar ::msgcat::mcset ca {Save as} {} ::msgcat::mcset ca {Save window conf} {Salvar conf finestra} ::msgcat::mcset ca {Screen axes} {Coord pantalla} ::msgcat::mcset ca {Screen map} {} ::msgcat::mcset ca Search Search ::msgcat::mcset ca {Select a color} {} ::msgcat::mcset ca {Selection window} {} ::msgcat::mcset ca {Separated volume} {Volums separats} ::msgcat::mcset ca ShowBox {} ::msgcat::mcset ca Signal Senyalar ::msgcat::mcset ca {Simplify NURBS} {} ::msgcat::mcset ca {Smooth lighting} Suau ::msgcat::mcset ca Sphere {} ::msgcat::mcset ca Split {} ::msgcat::mcset ca Status Status ::msgcat::mcset ca {STL mesh} {} ::msgcat::mcset ca {Stop at user demand} {} ::msgcat::mcset ca Structured Structurada ::msgcat::mcset ca {Style Window} {} ::msgcat::mcset ca Substraction {} ::msgcat::mcset ca {Surf. number %i. Its structured sizes must be checked} {} ::msgcat::mcset ca Surface Superfície ::msgcat::mcset ca {surface %i is over %i surfaces} {} ::msgcat::mcset ca {Surface boolean op.} {} ::msgcat::mcset ca {Surface mesh} {} ::msgcat::mcset ca {Surface sets} {} ::msgcat::mcset ca {Surface-2 points} {} ::msgcat::mcset ca Surface-lines {} ::msgcat::mcset ca Surface-surface {} ::msgcat::mcset ca {Swap arc} {Invertir arc} ::msgcat::mcset ca {TECPLOT ASCII file} {} ::msgcat::mcset ca Text {} ::msgcat::mcset ca {Text data report} {} ::msgcat::mcset ca Texture {} ::msgcat::mcset ca TGA {} ::msgcat::mcset ca {The following polylines have a bad defined structured size. It's necessary to fix them in order to mesh} {} ::msgcat::mcset ca {There are no %s} {} ::msgcat::mcset ca {There are no Cuts} {} ::msgcat::mcset ca {There are no Graphs} {} ::msgcat::mcset ca TIFF {} ::msgcat::mcset ca {To 4 sided set} {} ::msgcat::mcset ca {To use} {De us} ::msgcat::mcset ca {Toggle geometry-mesh view} {} ::msgcat::mcset ca Toolbars {} ::msgcat::mcset ca Torus {} ::msgcat::mcset ca {Total number of bad defined polylines: %i} {} ::msgcat::mcset ca {Total number of bad defined structured surfaces: %i} {} ::msgcat::mcset ca Trackball {De bola} ::msgcat::mcset ca Trimmed {} ::msgcat::mcset ca {Trying to create surface number: %i} {} ::msgcat::mcset ca Tutorials {} ::msgcat::mcset ca {Two point} {Dos punts} ::msgcat::mcset ca Uncollapse {} ::msgcat::mcset ca Union {} ::msgcat::mcset ca {Using Template .bas (only mesh)} {} ::msgcat::mcset ca Utilities Utilitats ::msgcat::mcset ca VDA {} ::msgcat::mcset ca Vertex {} ::msgcat::mcset ca {View %d} {} ::msgcat::mcset ca {View geometry} {Veure geometria} ::msgcat::mcset ca {View process info} {} ::msgcat::mcset ca {View results} {} ::msgcat::mcset ca View: {} ::msgcat::mcset ca {Visit %s web} {} ::msgcat::mcset ca {Volume boolean op.} {} ::msgcat::mcset ca {Volume sets} {} ::msgcat::mcset ca VRML {} ::msgcat::mcset ca {Warning: ACIS_BLEND_SPL_SUR. Fail surface creation } {} ::msgcat::mcset ca {Which command do you use to print files?} {} ::msgcat::mcset ca Window Finestra ::msgcat::mcset ca Windows {} ::msgcat::mcset ca {You should have a mesh generated for doing this operation} {} ::msgcat::mcset ca YZ {} ::msgcat::mcset ca {Z variation} {} ::msgcat::mcset ca Z-Axis {} ::msgcat::mcset ca Zoom Zoom ::msgcat::mcset ca {Zoom frame} {Zoom extensio} ::msgcat::mcset ca {Zoom in} {Zoom endins} ::msgcat::mcset ca {Zoom out} {Zoom enfora} ::msgcat::mcset ca {{3PointsXZ} {XandAngle} {Cancel}} {} ::msgcat::mcset ca {{3PointsXZ} {XandAngle} {Delete} {Cancel}} {} ::msgcat::mcset ca {{Absolute} {Relative} {Cancel}} {} ::msgcat::mcset ca {{ColourModules} {MonoColour} {Cancel}} {} ::msgcat::mcset ca {{DrawMesh} {NoDrawMesh} {Cancel}} {} ::msgcat::mcset ca {{Erase old mesh} {Append old mesh} {Cancel}} {} ::msgcat::mcset ca {{Minumum value} {Maximum value} {Mean value} {Cancel}} {} ::msgcat::mcset ca {{Normal} {Quadratic} {Quadratic9} {Cancel}} {} ::msgcat::mcset ca {{OK} {Cancel}} {} ::msgcat::mcset ca {{Quick} {Nice} {Texture} {Cancel}} {} ::msgcat::mcset ca {{Rectangle} {PolygonPNR} {CirclePNR} {Sphere} {Cylinder} {Cone} {Prism} {Torus} {Cancel}} {} ::msgcat::mcset ca {{USense} {VSense} {Cancel}} {} ::msgcat::mcset ca {Fail BASE32 encode algorithm} {} ::msgcat::mcset ca {Fail BASE32 decode algorithm} {} ::msgcat::mcset ca {Initializing postprocess...} {} ::msgcat::mcset ca {%s - couldn't write PassServer IP.\n Contact your System Administrator.} {} ::msgcat::mcset ca {%s - couldn't open file.\n Contact your System Administrator.} {} ::msgcat::mcset ca {This is the PROFESSIONAL Version, floating password obtained from PassServer IP=%s.} {} ::msgcat::mcset ca {This password is not valid for GiD 7.x.} {} ::msgcat::mcset ca {Passwords and licences from version 6.x or older are incompatible with this version.} {} ::msgcat::mcset ca {Get a temporal password at %s} {} ::msgcat::mcset ca {Please, contact your dealer to get a new licence.} {} ::msgcat::mcset ca { (in tclfile) to run 'gid is necessary to set the environment variable: GIDDEFAULT to the path of the executables} {} ::msgcat::mcset ca {Window configuration file not found} {} ::msgcat::mcset ca {Yes I'm confident about my Graphic Card and want to use its capabilities at my own risk.} {} ::msgcat::mcset ca {Yes I'm experiencing troubles with my Graphic Card and want to use a Software OpenGL.} {} ::msgcat::mcset ca {Changing to software rendering.} {} ::msgcat::mcset ca {Changing to accelerated OpenGL.} {} ::msgcat::mcset ca {Timeout excedeed, set as ACADEMIC Version.} {} ::msgcat::mcset ca {Connection recovered, set as PROFESSIONAL Version.} {} ::msgcat::mcset ca {Connection to password server has failed. SAVE YOUR MODEL. If it's not possible to reconnect before %d minutes, automatically swap to ACADEMIC Version.} {} ::msgcat::mcset ca {The problem data field %s has a non acceptable value in old problemtype} {} ::msgcat::mcset ca {This is the PROFESSIONAL Version, floating password obtained from PassServer IP %s.} {} ::msgcat::mcset ca {This is the ACADEMIC Version. Cannot get a password from PassServer IP %s. Check if this IP is correct.} {} ::msgcat::mcset ca {Do not try to get a password from this PassServer IP %s, because this is already a PROFESSIONAL Version.} {} ::msgcat::mcset ca {can't find file: %s ...Leaving} {} ::msgcat::mcset ca {Enter name of ACIS(SAT) file to read} {} ::msgcat::mcset ca {Geometry read} {} ::msgcat::mcset ca {Tolerance too small, ACIS read use Tolerance=1.e-8} {} ::msgcat::mcset ca {Wait, please...} {Esperi, sisplau...} ::msgcat::mcset ca {Warning, This file is for ACIS %d version, GiD only support until %d version. Some entities can change.} {} ::msgcat::mcset ca {%c Axis values and label cleared.} {} ::msgcat::mcset ca {'results_view_type' 'result_name' 'component_name' 'analisis_name' 'setp_value'} {} ::msgcat::mcset ca {'results_view_type' 'result_name' [ 'component_name'] 'analisis_name' 'setp_value'} {} ::msgcat::mcset ca {\n Time Table: ................................ cputime[s] (percent[%%]) Uses -- %s/min\n\n} {} ::msgcat::mcset ca {\n Time Table: ................................ cputime[s] (percent[%%]) Uses\n\n} {} ::msgcat::mcset ca {\n Fail insert pt %d.} {} ::msgcat::mcset ca {\n Number of %s=%d\n\n} {} ::msgcat::mcset ca {\n\nSurface number=} {} ::msgcat::mcset ca {\nSTACK IS:\n%s} {} ::msgcat::mcset ca {\tIn post it also adds analysis, steps and result lists.\n} {} ::msgcat::mcset ca {\tThe images are stored into the 'REPORTNAME_images' directory,\n} {} ::msgcat::mcset ca {\twhere the 'REPORTNAME.html' is saved.\n} {} ::msgcat::mcset ca {a Contour Fill yet.} {} ::msgcat::mcset ca {a Contour Lines yet.} {} ::msgcat::mcset ca {a Contour Rangos yet.} {} ::msgcat::mcset ca {a Smooth Contour Fill yet.} {} ::msgcat::mcset ca {alloc. temp res.1.} {} ::msgcat::mcset ca {alloc. temp res.2.} {} ::msgcat::mcset ca {alloc. these Gauss P.} {} ::msgcat::mcset ca {allocating memory for more results.v%d.} {} ::msgcat::mcset ca alone {} ::msgcat::mcset ca ArcTangent {} ::msgcat::mcset ca {Argument to x(),y() or z() in condition is out of bounds in assigned boundary element} {} ::msgcat::mcset ca {Argument to x(),y() or z() in condition is out of bounds in assigned element} {} ::msgcat::mcset ca {Argument: 'invert' has changed to 'swap' in .bas file} {} ::msgcat::mcset ca {As curves} {} ::msgcat::mcset ca {As lines} {} ::msgcat::mcset ca {Asign sizes by cordal error} {} ::msgcat::mcset ca Ask {} ::msgcat::mcset ca Assign {} ::msgcat::mcset ca {Assigned %i new entities and %i sub-entities to layer: %s} {} ::msgcat::mcset ca {Assigned %i new entities to layer: %s} {Assignades %i entitats noves a la capa: %s} ::msgcat::mcset ca {Assigned %i new entities to material: %s} {Assignades %i entitats noves al material: %s} ::msgcat::mcset ca {Assigned %i number of cells to %i lines} {} ::msgcat::mcset ca {Assigned %lf weight to %i lines} {} ::msgcat::mcset ca {Assigned default number of cells (2) to %i lines} {} ::msgcat::mcset ca {Assigned new size to %i new entities} {Nou tamany assignat a %i entitats noves} ::msgcat::mcset ca {Assigned size=%f to %i new entities} {Asignat tamany=%f a %i entitats noves} ::msgcat::mcset ca {Assigned to %i new entities} {Assignat a %i entitats noves} ::msgcat::mcset ca {Assigned weight[0]=%lf and weight[1]=%lf to %i lines.Select more lines to assign weights} {} ::msgcat::mcset ca {At the moment, cuadratic elements are handled as linear ones while cutting.} {} ::msgcat::mcset ca {At the moment, gaussian results can not be drawn on custs/transformations.} {} ::msgcat::mcset ca {At the moment, gaussian results can not be drawn on cuts.} {} ::msgcat::mcset ca {At the moment, gaussian results can not be drawn on transformations.} {} ::msgcat::mcset ca {At which distance should the covering mesh lie? [ %g]} {} ::msgcat::mcset ca {Auto crop image } {} ::msgcat::mcset ca Automatic Automàtic ::msgcat::mcset ca {Automatic animation} {} ::msgcat::mcset ca {Automatic collapse after import} {} ::msgcat::mcset ca {Automatic Comments} {} ::msgcat::mcset ca {Automatic correct sizes} {} ::msgcat::mcset ca {Automatic import tolerance value} {} ::msgcat::mcset ca {Automatic Limits} {} ::msgcat::mcset ca {Automatic redraw:} {} ::msgcat::mcset ca {Automatic remote update} {} ::msgcat::mcset ca {Automatic update has been disabled.} {} ::msgcat::mcset ca {Automatic updates} {} ::msgcat::mcset ca {Automatic Width} {} ::msgcat::mcset ca {Automatically select the affected lines to assign weights} {} ::msgcat::mcset ca {Available user groups} {} ::msgcat::mcset ca AVI/mjpeg {} ::msgcat::mcset ca {AVI/raw 15 bpp} {} ::msgcat::mcset ca {AVI/raw True Color} {} ::msgcat::mcset ca {Axes moved to its default position.} {} ::msgcat::mcset ca {Axes moved to: %d, %d} {} ::msgcat::mcset ca {Axes selected. Click on its new position.} {} ::msgcat::mcset ca BACK {} ::msgcat::mcset ca {BackGElem::GiveProjectedNatCoord Unimplemented for %d nodes} {} ::msgcat::mcset ca {Background Image discarted.} {} ::msgcat::mcset ca {Background mesh} {} ::msgcat::mcset ca {Background mesh readed.} {} ::msgcat::mcset ca {BackGroundInfo::GiveSize, unimplemented for %d nodes} {} ::msgcat::mcset ca {BackGroundInfo::ReadBackgroundMesh. Bad NNode=%d} {} ::msgcat::mcset ca {backup recover} {} ::msgcat::mcset ca {Backup time (min):} {} ::msgcat::mcset ca {Bad direction in twist mode.} {} ::msgcat::mcset ca {Bad element %d} {} ::msgcat::mcset ca {Bad elems detected: %d} {} ::msgcat::mcset ca {Bad extrusion option.} {} ::msgcat::mcset ca {Bad extrusion: figures projection lie too closed in line %d of polyline ( probably path is too far or figures are too big).} {} ::msgcat::mcset ca {Bad index} {} ::msgcat::mcset ca {Bad integer format} {} ::msgcat::mcset ca {Bad interval '%s', must be between 1 and %i.} {} ::msgcat::mcset ca {Bad interval '%s', must be between 1 and %i. Try again (ESC to leave)} {} ::msgcat::mcset ca {Bad max angle} {} ::msgcat::mcset ca {Bad min angle} {} ::msgcat::mcset ca {Bad mode option. Must be 0,1,2 or 3.} {} ::msgcat::mcset ca {Bad normal vector to project.} {} ::msgcat::mcset ca {Bad number of copies to be made.It must be > 0.} {} ::msgcat::mcset ca {Bad polyline num %d : tangent vectors not well defined.} {} ::msgcat::mcset ca {Bad polyline num %d : there's a point without defined tangent vector.} {} ::msgcat::mcset ca {Bad precision value. It must be in [0,1].} {} ::msgcat::mcset ca {Bad real format} {} ::msgcat::mcset ca {Bad selection, exists %d gap edges. Nodes: } {} ::msgcat::mcset ca {Bad selection, the points do not define a plane.} {} ::msgcat::mcset ca {Bad TwistMode: must be 'NaturalTwist','XY','XZ','YZ','ByDer2' or 'UserDirection'.} {} ::msgcat::mcset ca {Bad Type in line %d to project.} {} ::msgcat::mcset ca {Bad type of figures to be extruded.} {} ::msgcat::mcset ca {Base System: } {} ::msgcat::mcset ca Basic {} ::msgcat::mcset ca {Batch file name not correct. Mantaining old} {} ::msgcat::mcset ca {Batch file name not correct: %s.} {} ::msgcat::mcset ca {Batch file name not correct: %s. Mantaining old.} {} ::msgcat::mcset ca {Batch file name to write not correct. No batchfile written} {} ::msgcat::mcset ca {Batchfile to read not correct. Leaving} {Fitxer de comandes per llegir no és correcte. Sortint} ::msgcat::mcset ca {before applying 'Entities' it is necessary to select 1 layer} {} ::msgcat::mcset ca {before applying operation %s it is necessary to select layers} {} ::msgcat::mcset ca {before applying operation color it is necessary to select layers} {} ::msgcat::mcset ca {before applying operation delete it is necessary to select layers} {Abans d'aplicar l'operació 'borrar, és necessariseleccionar capes} ::msgcat::mcset ca {Before applying rename it is necessary to select 1 layer} {} ::msgcat::mcset ca {Before calculating, a project title is needed. Save project to get it} {} ::msgcat::mcset ca {Before pressing 'go' enter one entity number} {} ::msgcat::mcset ca Beginner {} ::msgcat::mcset ca {Big Font} {} ::msgcat::mcset ca {BinGaussPoints: error reading line.} {} ::msgcat::mcset ca {BinResult: couldn't read component name} {} ::msgcat::mcset ca {BinResult: couldn't read result properties} {} ::msgcat::mcset ca {BinResultRangesTable: error reading line.} {} ::msgcat::mcset ca {BinResultRangesTable: error reading range line.} {} ::msgcat::mcset ca Black {} ::msgcat::mcset ca {Black White} {} ::msgcat::mcset ca Black&White {} ::msgcat::mcset ca Blend {} ::msgcat::mcset ca {Blend Surfs: %s} {} ::msgcat::mcset ca {BLENDED_EDGE %d with Null length spine} {} ::msgcat::mcset ca {Blending edges} {} ::msgcat::mcset ca {BLOCKS section not found} {} ::msgcat::mcset ca Blue {} ::msgcat::mcset ca {BMP hardcopy} {} ::msgcat::mcset ca {BMP write} {} ::msgcat::mcset ca Body {} ::msgcat::mcset ca {Body Lines} {} ::msgcat::mcset ca {Book %s added for drawing. Continue adding books.} {} ::msgcat::mcset ca {Book %s already added for drawing. Try again (ESC to leave)} {} ::msgcat::mcset ca {Book doesn't exist. Try again (ESC to leave)} {} ::msgcat::mcset ca {Border Angle} {} ::msgcat::mcset ca {Border Graph} {} ::msgcat::mcset ca {Border graph} {} ::msgcat::mcset ca {Border graphs on Volume meshes till not supported.} {} ::msgcat::mcset ca Both {} ::msgcat::mcset ca {Both modes} {} ::msgcat::mcset ca Bottom: {} ::msgcat::mcset ca {Boundaries: %d } {} ::msgcat::mcset ca Boundary {} ::msgcat::mcset ca {Boundary lines} {} ::msgcat::mcset ca {Bring %s to front} {} ::msgcat::mcset ca {Bring ALL to front} {} ::msgcat::mcset ca {Bring all to front} {} ::msgcat::mcset ca {Bring to front} {} ::msgcat::mcset ca Browser {} ::msgcat::mcset ca {By geometry} {Per geometria} ::msgcat::mcset ca ByDer2 {} ::msgcat::mcset ca {ByLine in closed NURBS lines only usable for second point. Can continue} {PerLínea en línees NURBS tancades, sol es pot usar pel segon punt. Pot continuar} ::msgcat::mcset ca {C - Color field in ZONE record not supported} {} ::msgcat::mcset ca {C. On/Off Freeze/Un Name} {} ::msgcat::mcset ca {C. System:} {} ::msgcat::mcset ca {C.Fill %s} {} ::msgcat::mcset ca {C.Lines %s} {} ::msgcat::mcset ca Calculating {} ::msgcat::mcset ca {Calculation canceled after write calculation file} {} ::msgcat::mcset ca {Calculation canceled before write calculation file} {} ::msgcat::mcset ca {Calculation failed} {} ::msgcat::mcset ca {Calculation finished} {} ::msgcat::mcset ca {Calculation finished. Files not transferred automatically} {} ::msgcat::mcset ca {Calculation finished. Transferring files} {} ::msgcat::mcset ca {Calculation finished. You can download the remote results} {} ::msgcat::mcset ca {Calculation killed} {} ::msgcat::mcset ca {CalculatorV Help} {} ::msgcat::mcset ca {Call to SurfMeshOptions has failed.} {} ::msgcat::mcset ca {Can continue (ESC to leave)} {Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Can not get source type of the extrusion} {} ::msgcat::mcset ca {Can't add %lf to a zero size Matriu} {} ::msgcat::mcset ca {Can't calculate this type of problem} {} ::msgcat::mcset ca {Can't close the line. You can continue} {} ::msgcat::mcset ca {Can't compute the crout decomposition of a zero size Matriu} {} ::msgcat::mcset ca {Can't create a Matriu of size %d,%d} {} ::msgcat::mcset ca {Can't create a polyline of 1 line. Try again} {} ::msgcat::mcset ca {Can't create a vector of size %d} {} ::msgcat::mcset ca {Can't create one point joined to one existant} {No es pot crear un punt ajuntat a un d'existent} ::msgcat::mcset ca {Can't erase Layer %s. At least must exist one layer.} {} ::msgcat::mcset ca {Can't erase Layer %s. It has conditions applied.} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities} {No es pot borrar la capa '%s'. Té entitats} ::msgcat::mcset ca {Can't erase Layer %s. It has entities (Dimension %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities (Line %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities (Point %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities (Surface %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities (Volume %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has entities in its BACK. Use menu (in layers window): Layers->ToFront} {} ::msgcat::mcset ca {Can't erase Layer %s. It has MESH entities} {} ::msgcat::mcset ca {Can't erase Layer %s. It has MESH entities (Element %i)} {} ::msgcat::mcset ca {Can't erase Layer %s. It has MESH entities (Node %i)} {} ::msgcat::mcset ca {Can't find file: %s} {} ::msgcat::mcset ca {can't find file: %s} {No escape pot trobar el fitxer: %s} ::msgcat::mcset ca {Can't find file: %s ...Leaving} {} ::msgcat::mcset ca {Can't find file: '%s' ...Leaving} {} ::msgcat::mcset ca {Can't find word '%s' in input file} {} ::msgcat::mcset ca {Can't join points} {No es pot ajuntar els punts} ::msgcat::mcset ca {Can't multiply by %lf a zero size Matriu} {} ::msgcat::mcset ca {Can't open Shapefile: ...Leaving} {} ::msgcat::mcset ca {Can't read batch file which is being written. Leaving} {No es pot llegir el fitxer de comandes que s'està escribint. Sortint} ::msgcat::mcset ca {Can't rename layer %s. Problems with BACK layers. Use menu (in layers window): Layers->Bring ALL to front} {} ::msgcat::mcset ca {Can't run postprocess for this type of problem} {} ::msgcat::mcset ca {Can't subtract %lf from a zero size Matriu} {} ::msgcat::mcset ca {Can't undo any more} {} ::msgcat::mcset ca {can't undo any more} {No es pot desfer res més} ::msgcat::mcset ca Cancel Cancel.lar ::msgcat::mcset ca {Cancel Weights} {} ::msgcat::mcset ca {Cancelling old BackGround Mesh?} {} ::msgcat::mcset ca {Cancelling old BackGround Mesh? y/n} {} ::msgcat::mcset ca {Cancelling old mesh?} {Cancel.lar la malla antiga?} ::msgcat::mcset ca {Cancelling old mesh? y/n} {Cancel.lar la malla antiga? s/n} ::msgcat::mcset ca {Cannot accept changes. Line is contour of a NurbSurface. Leaving} {} ::msgcat::mcset ca {Cannot accept changes. Line is contour of a surface. Leaving} {} ::msgcat::mcset ca {Cannot accept changes. Surface is contour of a volume. Leaving} {} ::msgcat::mcset ca {Cannot delete file %s} {} ::msgcat::mcset ca {Cannot draw higherEntities in the mesh.} {} ::msgcat::mcset ca {Cannot extrude polyline num %d : tangent vectors not well defined.} {} ::msgcat::mcset ca {Cannot extrude polyline num %d : there's a point without defined tangent vector.} {} ::msgcat::mcset ca {Cannot extrude volumes.} {} ::msgcat::mcset ca {Cannot extrude: projections create autointersections in line %d of path line.} {} ::msgcat::mcset ca {Cannot extrude: projections create autointersections in line %d of path line. Maybe figures are too far from the start of path line.} {} ::msgcat::mcset ca {Cannot read keyword in line %d.} {} ::msgcat::mcset ca {Cannot swap elem: piramidal shape in elem %d.[ %d %d ]} {} ::msgcat::mcset ca {Cannot swap elem: strange phenomena in elem %d} {} ::msgcat::mcset ca {Cannot swap, strange phenomena in elem %d.} {} ::msgcat::mcset ca Cartesian {} ::msgcat::mcset ca Case {} ::msgcat::mcset ca {Case %d not implemented in associative instance entity} {} ::msgcat::mcset ca {CCollapseGiDmsh::Octree::Octree Error: bad resolution value %.5f. Using default value %le} {} ::msgcat::mcset ca Center Centre ::msgcat::mcset ca {Center of rotation not changed} {} ::msgcat::mcset ca Center: {} ::msgcat::mcset ca {Centerline radius must be positive} {} ::msgcat::mcset ca {Change 'layer to use'} {} ::msgcat::mcset ca {Change accelerators} {} ::msgcat::mcset ca {Change ambient color for %s} {} ::msgcat::mcset ca {Change Color} {} ::msgcat::mcset ca {Change color} {} ::msgcat::mcset ca {Change color graph} {} ::msgcat::mcset ca {Change color window} {} ::msgcat::mcset ca {Change Colors} {} ::msgcat::mcset ca {Change diffuse color for %s} {} ::msgcat::mcset ca {Change light vector direction} {} ::msgcat::mcset ca {Change line pattern} {} ::msgcat::mcset ca {Change line width} {} ::msgcat::mcset ca {Change Name} {} ::msgcat::mcset ca {Change pattern factor} {} ::msgcat::mcset ca {Change point size} {} ::msgcat::mcset ca {Change position} {} ::msgcat::mcset ca {Change Shininess for %s} {} ::msgcat::mcset ca {Change specular color for %s} {} ::msgcat::mcset ca {Change style graph} {} ::msgcat::mcset ca {Change text} {} ::msgcat::mcset ca {Change Title} {} ::msgcat::mcset ca {Change title graph} {} ::msgcat::mcset ca {Change values of condition} {Canviar valors de la condició} ::msgcat::mcset ca {Change Weight} {} ::msgcat::mcset ca {Changed bad small size to %d nodes to %lf} {} ::msgcat::mcset ca {Changed NURBS line. Leaving} {Línea NURBS canviada. Sortint} ::msgcat::mcset ca {Changed NURBS surface. Leaving} {Superfície NURBS canviada. Sortint} ::msgcat::mcset ca {Changed sense to %i entities} {Canviat el sentit a %i entitats} ::msgcat::mcset ca {Changed sense to %i entities. Can continue.} {Canviat el sentit a %i entitats. Pot continuar} ::msgcat::mcset ca {Changed size automatically to %i entities} {} ::msgcat::mcset ca {Changed to Color scale.} {} ::msgcat::mcset ca {Changed to Grey scale.} {} ::msgcat::mcset ca {Changes the color used to draw the entities in render mode.} {} ::msgcat::mcset ca {Changes the default meshing criteria. Entities will be always meshed by default, although they have higher entities over them.\nExample: If surfaces are checked, when meshing a volume, both volume elements and surface elements will be obtained.} {} ::msgcat::mcset ca {Changing %s } {} ::msgcat::mcset ca {Changing 'mesh copy' color} {} ::msgcat::mcset ca {Changing Graf Color} {} ::msgcat::mcset ca {Changing Maximum Color} {} ::msgcat::mcset ca {Changing Minimum Color} {} ::msgcat::mcset ca {Changing property '%s': unknown set '%s'} {} ::msgcat::mcset ca {Changing stream lines color} {} ::msgcat::mcset ca {Changing vector's MonoColor} {} ::msgcat::mcset ca {Check for a encryted secure connection with the server.} {} ::msgcat::mcset ca {Check for more info to files in directory: } {} ::msgcat::mcset ca {Check your internet connection and try later.} {} ::msgcat::mcset ca {Check your internet connection.} {} ::msgcat::mcset ca Check: {} ::msgcat::mcset ca {Checked elems} {} ::msgcat::mcset ca {Choose (Surface, Volume,SeparatedVolume)} {Esculli: (Superfície, Volum,VolumSeparat)} ::msgcat::mcset ca {Choose a Graphs option} {} ::msgcat::mcset ca {Choose a line diagram option} {} ::msgcat::mcset ca {Choose a module:} {} ::msgcat::mcset ca {Choose a topic:} {} ::msgcat::mcset ca {Choose a word:} {} ::msgcat::mcset ca {Choose an entity type} {} ::msgcat::mcset ca {Choose an entity type to select} {} ::msgcat::mcset ca {Choose definition mode} {Esculli el mode de definició} ::msgcat::mcset ca {Choose definition mode or delete} {Esculli mode de definició o 'Borrar'} ::msgcat::mcset ca {Choose extrude on lines or on surfaces or volumes(lines/surfaces/volumes)} {} ::msgcat::mcset ca {Choose extrude on lines or on surfaces:} {} ::msgcat::mcset ca {Choose how to calibrate the user defined color scale for contours [ } {} ::msgcat::mcset ca {Choose lines,surfaces or volumes} {Esculli línees,superfícies o volums} ::msgcat::mcset ca {Choose method} {} ::msgcat::mcset ca {Choose NURBS sense} {} ::msgcat::mcset ca {Choose one module} {} ::msgcat::mcset ca {Choose option} {Esculli opció} ::msgcat::mcset ca {Choose property to change: Massive} {} ::msgcat::mcset ca {Choose the side you want.} {} ::msgcat::mcset ca {Choose the side you want. and then, enter distance} {} ::msgcat::mcset ca {Choose transformation type or option:} {} ::msgcat::mcset ca {Choose transformation type: (rotation/translation/mirror/scale/offset/align)} {} ::msgcat::mcset ca {Choose transformation type: Rotation, Translation, Mirror.} {} ::msgcat::mcset ca {Choose: %s} {} ::msgcat::mcset ca {Choosing an entity type will cause it not to be viewed} {} ::msgcat::mcset ca {Choosing materials in the form a:b requires b>=a} {En escollir materials en la forma a:b es requereix b>=a} ::msgcat::mcset ca Cilindrical {} ::msgcat::mcset ca {CircunCenter2D. solver fail.} {} ::msgcat::mcset ca {Clean values fields} {} ::msgcat::mcset ca Clear {} ::msgcat::mcset ca {Clear All} {} ::msgcat::mcset ca {Clear graphs} {} ::msgcat::mcset ca {Clear one break or all?} {} ::msgcat::mcset ca {Cleared all entities for this interval and condition} {} ::msgcat::mcset ca {Cleared MESH entities for this interval and condition} {} ::msgcat::mcset ca {Clears active code. It does not change any macro definition.} {} ::msgcat::mcset ca {Click LEFT MOUSE BUTTON to start moving light.} {} ::msgcat::mcset ca {Click on the screen object you want to move: axis, comments or legend} {} ::msgcat::mcset ca {Click on where the LOWER LEFT corner of the image should be.} {} ::msgcat::mcset ca {Click on where the LOWER RIGHT corner of the image should be.} {} ::msgcat::mcset ca {Click on where the UPPER LEFT corner of the image should be.} {} ::msgcat::mcset ca {Click on where the UPPER RIGHT corner of the image should be.} {} ::msgcat::mcset ca {Click the} {} ::msgcat::mcset ca {Clip planes} {Plans de tall} ::msgcat::mcset ca {Clip planes not changed} {} ::msgcat::mcset ca Clone {} ::msgcat::mcset ca Close Tancar ::msgcat::mcset ca {Closes this menu or window} {} ::msgcat::mcset ca {CMY color space} {} ::msgcat::mcset ca {Coherence error between structured surfaces. They must be corrected by hand} {} ::msgcat::mcset ca {Coldn't add Nodes %u:%u clamping to %u:%u.} {} ::msgcat::mcset ca {Collapse edges} {} ::msgcat::mcset ca {Collapse edges is not available with quadratic elements} {} ::msgcat::mcset ca {Collapse geometry, Time=%d seconds ::created %d points,%d lines ,%d surfaces, %d volumes. ImportTolerance=%lf} {} ::msgcat::mcset ca {Collapse mesh. Created %i elements and %i nodes. ImportTolerance=%lf} {} ::msgcat::mcset ca {Collapse model. Created %d points,%d lines ,%d surfaces, %d volumes. ImportTolerance=%lf} {} ::msgcat::mcset ca {Collapse::created %d points,%d lines ,%d surfaces, %d volumes. ImportTolerance=%lf} {} ::msgcat::mcset ca {Collapsed elems: %d , remaining %d.} {} ::msgcat::mcset ca Collapsing {} ::msgcat::mcset ca {Collapsing indep} {} ::msgcat::mcset ca {Collapsing points} {} ::msgcat::mcset ca Color Color ::msgcat::mcset ca {Color above max. limit:} {} ::msgcat::mcset ca {Color below min. limit:} {} ::msgcat::mcset ca {Color by} {} ::msgcat::mcset ca {Color Change} {} ::msgcat::mcset ca {Color changed} {Color canviat} ::msgcat::mcset ca {Color map:} {} ::msgcat::mcset ca {Color Mode} {} ::msgcat::mcset ca {Color Scale} {} ::msgcat::mcset ca {Color type for the 'mesh copy'?} {} ::msgcat::mcset ca {Color window} {} ::msgcat::mcset ca color: {} ::msgcat::mcset ca Colors {} ::msgcat::mcset ca {Colors field} {} ::msgcat::mcset ca {Colour Key no. %d changed to #%02x%02x%02x} {} ::msgcat::mcset ca comand: {} ::msgcat::mcset ca {Comand: '%s' is too long in file GrInterpNamesPost} {} ::msgcat::mcset ca {Coments moved to: %d, %d} {} ::msgcat::mcset ca Command {} ::msgcat::mcset ca {Command buttons} {} ::msgcat::mcset ca {Command not defined for this togl instance.} {} ::msgcat::mcset ca Command: {} ::msgcat::mcset ca Comments Comentaris ::msgcat::mcset ca {Comments are now created automatically.} {} ::msgcat::mcset ca {Comments are now not automatically created.} {} ::msgcat::mcset ca {Comments are now not shown.} {} ::msgcat::mcset ca {Comments are now shown.} {} ::msgcat::mcset ca {Comments Font} {} ::msgcat::mcset ca {Comments moved to its default position.} {} ::msgcat::mcset ca {Comments selected. Click on its new position.} {} ::msgcat::mcset ca Component {} ::msgcat::mcset ca Component: {} ::msgcat::mcset ca {ComponentNames without a previous ResultDescription in this ResultGroup} {} ::msgcat::mcset ca components {} ::msgcat::mcset ca {Compressed BMP's are not supported.} {} ::msgcat::mcset ca {Compressing file '%s'...} {} ::msgcat::mcset ca {Concentrate elements } {} ::msgcat::mcset ca Cond {} ::msgcat::mcset ca {Cond::TransferFromGeomToHigherMesh, error, boundary edge {%d %d} not found} {} ::msgcat::mcset ca {Condition %s added for drawing. Continue adding conditions.} {} ::msgcat::mcset ca {Condition %s already added for drawing. Try again (ESC to leave)} {} ::msgcat::mcset ca {Condition %s has diferent number of fields} {} ::msgcat::mcset ca {Condition %s has imcompatible fields} {} ::msgcat::mcset ca {Condition '%s' has flag 'on elements' and maybe it needs flag 'on face elements' in the .cnd file in the problem type} {} ::msgcat::mcset ca {Condition doesn't exist. Try again (ESC to leave)} {Condició no existeix. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Condition name too large. Try again} {Nom de condició massa llarg. Intenti-ho de nou} ::msgcat::mcset ca {Condition: '%s' has no fields} {} ::msgcat::mcset ca Conditions Condicions ::msgcat::mcset ca {Conditions will not be shown.} {} ::msgcat::mcset ca {Conditions, Materials, Interval data and Problem data are option available only when defined inside a problem type} {} ::msgcat::mcset ca {Configure toolbars} {} ::msgcat::mcset ca Confirm {} ::msgcat::mcset ca {Confirm: %s} {} ::msgcat::mcset ca {Connection to server '%s' for project '%s' has failed (%s).} {} ::msgcat::mcset ca {Connection to server '%s' has failed (%s).} {} ::msgcat::mcset ca {Connection to server '%s' has failed (timeout).} {} ::msgcat::mcset ca {Connection to server has failed (%s).} {} ::msgcat::mcset ca {Connection to server has failed (%s). Try again} {} ::msgcat::mcset ca {Connection to server has failed for '%s'.} {} ::msgcat::mcset ca {Connection to server has failed.} {} ::msgcat::mcset ca {Contact your Software dealer to\nobtain the key for this host:\n\nName: %s\nOperating System: %s\nsysinfo: %s\n} {} ::msgcat::mcset ca ContactSurface {} ::msgcat::mcset ca ContactVolume {} ::msgcat::mcset ca {Contents of the macro are void. Please, fill in them with text or with the button 'Record'} {} ::msgcat::mcset ca {Continue creating new surfaces, Enter lines (ESC to leave)} {} ::msgcat::mcset ca {Continue creating new volumes} {Continui creant volums} ::msgcat::mcset ca {Continue entering control points} {} ::msgcat::mcset ca {Continue entering interpolated points} {Pot continuar entrant punts interpolats} ::msgcat::mcset ca {Continue entering points} {Pot continuar entrant punts} ::msgcat::mcset ca {Continue selecting (ESC to leave)} {Continui seleccionant (ESC per acabar)} ::msgcat::mcset ca {Continuing with postprocess} {} ::msgcat::mcset ca {Continuing with previus batch file} {} ::msgcat::mcset ca Contour {} ::msgcat::mcset ca {Contour colors} {} ::msgcat::mcset ca {Contour element %i is not correct} {} ::msgcat::mcset ca {Contour Fill} {} ::msgcat::mcset ca {Contour Fill '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Contour fill for} {} ::msgcat::mcset ca {Contour Fill:} {} ::msgcat::mcset ca {Contour filled} {} ::msgcat::mcset ca {Contour filled elevation will be shown} {} ::msgcat::mcset ca {Contour Limits} {} ::msgcat::mcset ca {Contour limits options:} {} ::msgcat::mcset ca {Contour Lines} {} ::msgcat::mcset ca {Contour Lines '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Contour lines for} {} ::msgcat::mcset ca {Contour Minimum and Maximum values set to: %g - %g for SHOWN SETS.} {} ::msgcat::mcset ca {Contour Minimum and Maximum values set to: %g - %g for ALL SETS.} {} ::msgcat::mcset ca {Contour Ranges} {} ::msgcat::mcset ca {Contour Ranges '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Contour's Min. Max.:} {} ::msgcat::mcset ca {Convert cuts to surface sets} {} ::msgcat::mcset ca {Convert point %i to point %i? (distance=%lg) (y/n)} {} ::msgcat::mcset ca {Convert to cuts} {} ::msgcat::mcset ca {Converts this menu to a normal window} {} ::msgcat::mcset ca CoonSurface {} ::msgcat::mcset ca {Coordinate must be a real number} {} ::msgcat::mcset ca {Coordinates moved to its default position.} {} ::msgcat::mcset ca {Coordinates moved to: %d, %d} {} ::msgcat::mcset ca {Coordinates read} {} ::msgcat::mcset ca {Coordinates selected. Click on its new position.} {} ::msgcat::mcset ca {Coordinates written} {} ::msgcat::mcset ca Coords: {} ::msgcat::mcset ca Copies {} ::msgcat::mcset ca {Copious data type %d Not implemented} {} ::msgcat::mcset ca Copy Copiar ::msgcat::mcset ca {Copy conditions' entities from interval %s?} {} ::msgcat::mcset ca {Copy conditions' entities?} {Es copien les entitats de les condicions?} ::msgcat::mcset ca {Copy conditions' entities? (y/n/ESC)} {Es copien les entitats de les condicions? (Si/No/ESC)} ::msgcat::mcset ca Copy/Transform {} ::msgcat::mcset ca {CopyEntities:: Image of line %d is not ArcLine} {} ::msgcat::mcset ca {CopyEntities:: Image of line %d is not NurbLine} {} ::msgcat::mcset ca {Copying triangles} {} ::msgcat::mcset ca {Cordal error must be positive. Try again} {El error cordal ha de ser positiu. Intenti-ho de nou} ::msgcat::mcset ca {Cordal Error:} {} ::msgcat::mcset ca {Correct incompatible sizes} {} ::msgcat::mcset ca {Correct meshing sizes} {} ::msgcat::mcset ca {Corrupted file, Created a bad point number %d for the line number %d. Must be repaired} {} ::msgcat::mcset ca {Could not connect to server} {} ::msgcat::mcset ca {Could not create as planar surface. Created as normal NURBS surface} {} ::msgcat::mcset ca {Could not find any nodes or mesh information !} {} ::msgcat::mcset ca {Could not find element} {} ::msgcat::mcset ca {Could not find intersection point. Try again} {} ::msgcat::mcset ca {Could not open file '%s'} {} ::msgcat::mcset ca {Could not open file '%s' to read} {} ::msgcat::mcset ca {Could not open file '%s' to write} {} ::msgcat::mcset ca {Could not read unit set %1\$s. Only read %2\$s} {} ::msgcat::mcset ca {Could not subdivide surface %i} {} ::msgcat::mcset ca {Could not subdivide surface, check point %d} {} ::msgcat::mcset ca {Couldn't clear existing gid file. Check permissions and quotas} {No s'ha pogut esborrar fitxer gid existent. Comprobi permisos i quotes} ::msgcat::mcset ca {Couldn't copy image to clipboard.} {} ::msgcat::mcset ca {Couldn't do hardcopy. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't do write Gif file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't do write Jpeg file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't do write Png file. Test permissions and quotas} {} ::msgcat::mcset ca {couldn't find 'end values', } {} ::msgcat::mcset ca {Couldn't find original boundary.} {} ::msgcat::mcset ca {Couldn't find point} {} ::msgcat::mcset ca {Couldn't find SizeImage, guessing . . .} {} ::msgcat::mcset ca {Couldn't find the togl instance for this command.} {} ::msgcat::mcset ca {Couldn't find this command in this togl instance.} {} ::msgcat::mcset ca {Couldn't get center, pick arc} {} ::msgcat::mcset ca {Couldn't get Computer Name.} {} ::msgcat::mcset ca {Couldn't get Computer System Information.} {} ::msgcat::mcset ca {Couldn't get normal in element} {} ::msgcat::mcset ca {Couldn't get normal in surface} {} ::msgcat::mcset ca {Couldn't get point in element} {} ::msgcat::mcset ca {Couldn't get point in line} {} ::msgcat::mcset ca {Couldn't get point in surface} {} ::msgcat::mcset ca {Couldn't get tangent in line} {} ::msgcat::mcset ca {Couldn't guess element type for the zone} {} ::msgcat::mcset ca {Couldn't guess element type for this zone '%s'} {} ::msgcat::mcset ca {Couldn't map point} {} ::msgcat::mcset ca {Couldn't map point in quadratic} {} ::msgcat::mcset ca {Couldn't open '%s' for writing.} {} ::msgcat::mcset ca {Couldn't open directory to write batchfile} {No s'ha pogut obrir el directori per escriure el fitxer de comandes} ::msgcat::mcset ca {Couldn't open file '%s': %s} {} ::msgcat::mcset ca {Couldn't open file: '%s'} {} ::msgcat::mcset ca {Couldn't print image.} {} ::msgcat::mcset ca {Couldn't read batch file '%s'. Leaving} {No s'ha pogut llegir el fitxer de comandes '%s'. Sortint} ::msgcat::mcset ca {Couldn't read Graph from file '%s'.} {} ::msgcat::mcset ca {Couldn't save backup file '%s.gid'. Backup disconnected} {} ::msgcat::mcset ca {Couldn't save file '%s'. Check permissions and quotas} {} ::msgcat::mcset ca {Couldn't save. Check permissions and quotas} {No s'ha pogut salvar. Comprobi permisos i quotes} ::msgcat::mcset ca {Couldn't save. Test permissions and quotas} {No s'ha pogut salvar. Comprobi permisos i quotes} ::msgcat::mcset ca {Couldn't set element %d type for the zone} {} ::msgcat::mcset ca {Couldn't set element %d type for this zone '%s'} {} ::msgcat::mcset ca {Couldn't use: } {} ::msgcat::mcset ca {Couldn't write Bmp file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write Graph_%d into file '%s'.} {} ::msgcat::mcset ca {Couldn't write Ppm file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write ps/eps file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write Tga file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write Tiff file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write Vrml file. Test permissions and quotas} {} ::msgcat::mcset ca {Couldn't write. Check permissions and quotas} {No s'ha pogut escriure. Comprobi permisos i quotes} ::msgcat::mcset ca {Cover mesh write} {} ::msgcat::mcset ca {Cover meshes successfully written in file '%s'.} {} ::msgcat::mcset ca {Covering mesh} {} ::msgcat::mcset ca Create Crear ::msgcat::mcset ca {Create a new directory} {} ::msgcat::mcset ca {Create a new layer.} {} ::msgcat::mcset ca {Create a new point or join to old one? (new/old)} {Crear un punt nou o seleccionar-ne un de existent? (Nou/Vell)} ::msgcat::mcset ca {Create automatic comment lines?} {} ::msgcat::mcset ca {Create automatic comment lines? Yes - No ( %s).} {} ::msgcat::mcset ca {Create contacts} {Crear contactes} ::msgcat::mcset ca {Create one new point or pick the existing one? (new/old)} {} ::msgcat::mcset ca {Create only points} {} ::msgcat::mcset ca {Create Parametric Line} {} ::msgcat::mcset ca {Create point procedure} {} ::msgcat::mcset ca {Create Vectorial PostScripts? ( %s).} {} ::msgcat::mcset ca {Create volume/surface} {} ::msgcat::mcset ca {Created %d blend surfaces} {} ::msgcat::mcset ca {Created %d lines, %d surfaces, %d volumes} {} ::msgcat::mcset ca {Created %d new elems, deleted %d elems.} {} ::msgcat::mcset ca {Created %d new lines and %d new points.} {} ::msgcat::mcset ca {Created %d new points.} {} ::msgcat::mcset ca {Created %d new surfaces, %d new lines and %d new points.} {} ::msgcat::mcset ca {Created %d new volume with %d holes. Enter more volumes} {} ::msgcat::mcset ca {Created %d new volume. Enter more volumes} {} ::msgcat::mcset ca {Created %d new volumes with %d holes. Enter more volumes} {} ::msgcat::mcset ca {Created %d new volumes, %d new surfaces, %d new lines and %d new points.} {} ::msgcat::mcset ca {Created %d new volumes, %d new surfaces, %d new lines and %d new points. Can continue} {} ::msgcat::mcset ca {Created %d new volumes. Enter more volumes} {} ::msgcat::mcset ca {Created %i linear elements.} {} ::msgcat::mcset ca {Created %i lines, divided %i lines %i surfaces. Can continue} {} ::msgcat::mcset ca {Created %i lines. Can continue} {} ::msgcat::mcset ca {Created %i new contact surfaces. %s} {Creats %i contactes de superfície nous. %s} ::msgcat::mcset ca {Created %i new contact volumes. %s} {Creats %i contactes de volum nous. %s} ::msgcat::mcset ca {Created %i new intersection points. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Created %i new lines, divided %i lines and %i surfaces. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Created %i new lines, divided %i lines and %i surfaces. Leaving} {} ::msgcat::mcset ca {Created %i new lines. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Created %i new lines. Leaving} {} ::msgcat::mcset ca {Created %i new surface, %i new lines and %i new points. Can continue} {} ::msgcat::mcset ca {Created %i new surfaces} {Creades %i superfícies} ::msgcat::mcset ca {Created %i new surfaces. Leaving} {} ::msgcat::mcset ca {created %i new surfaces. Leaving} {Creades %i superfícies noves. Sortint} ::msgcat::mcset ca {Created %i new surfaces. You can continue (ESC to end)} {Creades %i superfícies noves. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Created %i new volumes. Leaving} {%i volums nous creats. Sortint} ::msgcat::mcset ca {Created %i points. Can continue} {} ::msgcat::mcset ca {Created %i quadrilateral elements.} {} ::msgcat::mcset ca {Created %i triangle elements.} {} ::msgcat::mcset ca {Created 0 new elements} {} ::msgcat::mcset ca {Created 1 line and %i points. Can continue} {} ::msgcat::mcset ca {Created 1 new surface, %i new lines and %i new points. Can continue} {} ::msgcat::mcset ca {Created 1 new surface, 1 new line and 1 new point. Can continue} {} ::msgcat::mcset ca {Created 1 new volume, 4 new surfaces, 8 new lines and 4 new points. Can continue} {} ::msgcat::mcset ca {Created a new dimension.} {} ::msgcat::mcset ca {Created a new point} {Cret un punt nou} ::msgcat::mcset ca {Created again layer %s. It was lost} {} ::msgcat::mcset ca {Created interval number %i. Using this} {Creat interval %i. Usant aquest} ::msgcat::mcset ca {Created new custom render '%s'} {} ::msgcat::mcset ca {Created new layer: '%s'. Using this} {Creada una nova capa: '%s'. Usant aquesta} ::msgcat::mcset ca {Created one arc. Can continue} {Creat un arc. pot continuar} ::msgcat::mcset ca {Created one new NURBS surface} {} ::msgcat::mcset ca {Created one new planar NURBS surface} {} ::msgcat::mcset ca {Created One new separated contact volume. Can continue} {Creat un nou contacte de volum separat. Pot continuar} ::msgcat::mcset ca {Created one new surface. Can continue} {} ::msgcat::mcset ca {Created one new surface. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Created surface defined by contour lines: %s.} {} ::msgcat::mcset ca {Creating a circle given center,normal and radius} {} ::msgcat::mcset ca {Creating a cone given base center,normal radius and height} {} ::msgcat::mcset ca {Creating a cylinder given base center,normal,radius and height} {} ::msgcat::mcset ca {Creating a polygon given center,normal and radius} {} ::msgcat::mcset ca {Creating a prism given center,normal,radius and height} {} ::msgcat::mcset ca {Creating a rectangle in the XY plane} {} ::msgcat::mcset ca {Creating a sphere given center and radius} {} ::msgcat::mcset ca {Creating a Torus given center, centerline radius and cross section radius} {} ::msgcat::mcset ca {Creating animation of static analysis} {} ::msgcat::mcset ca {Creating geometry} {} ::msgcat::mcset ca {Creating geometry from mesh component %d : %d elems, %d nodes, %d edges.} {} ::msgcat::mcset ca {Creating geometry of meshes...} {} ::msgcat::mcset ca {Creating grid} {} ::msgcat::mcset ca {Creating new cut edegs for points} {} ::msgcat::mcset ca {Creating new cut factor for points} {} ::msgcat::mcset ca {Creating new cut points} {} ::msgcat::mcset ca {Creating new extruded set, no mem for middle elems} {} ::msgcat::mcset ca {Creating new extruded set, no mem for new elems} {} ::msgcat::mcset ca {Creating new extruded set, no mem for old elems} {} ::msgcat::mcset ca {Creating new original cut points} {} ::msgcat::mcset ca {Creating new original points} {} ::msgcat::mcset ca {Creating new points} {} ::msgcat::mcset ca {Creating OctTree} {} ::msgcat::mcset ca {Creating octtree} {} ::msgcat::mcset ca {Creating surfmeshes from GiD mesh...} {} ::msgcat::mcset ca {Creating transformed & extruded meshes/sets and results.} {} ::msgcat::mcset ca {Creating transformed & extruded meshes/sets and results. NO CUTS ARE TRASFORMED & EXTRUDED.} {} ::msgcat::mcset ca {Creating transformed meshes/sets and results.} {} ::msgcat::mcset ca {Creating transformed meshes/sets and results. NO CUTS ARE TRASFORMED.} {} ::msgcat::mcset ca Credits {} ::msgcat::mcset ca {Cross section radius cannot be greater than centerline radius. Try again.} {} ::msgcat::mcset ca {Cross section radius must be positive} {} ::msgcat::mcset ca {Cull Back Faces} {} ::msgcat::mcset ca {Cull Front Faces} {} ::msgcat::mcset ca {Culling Back faces.} {} ::msgcat::mcset ca {Culling Front & Back faces.} {} ::msgcat::mcset ca {Culling Front faces.} {} ::msgcat::mcset ca {Culling Style} {} ::msgcat::mcset ca Current Actual ::msgcat::mcset ca {Current Analysis: '%s'.} {} ::msgcat::mcset ca {Current clip limits are: Near %f; Far %f. Enter new limits} {} ::msgcat::mcset ca {Current files in temporal directory seem to be old. Erase them?} {} ::msgcat::mcset ca {Current Interval:} {} ::msgcat::mcset ca {Current keyboard shortcut code:} {} ::msgcat::mcset ca {Current list of results:} {} ::msgcat::mcset ca {Current macro code:} {} ::msgcat::mcset ca {Current node: %lf,%lf,%lf} {} ::msgcat::mcset ca {Current problem type is unknown. No changes} {} ::msgcat::mcset ca {Current project '%s' is not running.} {} ::msgcat::mcset ca {Current project '%s' is not running. To kill other processes use the Calculate window} {} ::msgcat::mcset ca {Current result} {} ::msgcat::mcset ca {Current Step: '%g'.} {} ::msgcat::mcset ca {Current style} {} ::msgcat::mcset ca {Current value %.6f} {} ::msgcat::mcset ca {Current value %d} {} ::msgcat::mcset ca {Current window} {} ::msgcat::mcset ca {Curve of degree %i must have %i or more points} {} ::msgcat::mcset ca {Curve precision} {} ::msgcat::mcset ca {Custom render '%s' already exists} {} ::msgcat::mcset ca {Customization Help} {} ::msgcat::mcset ca {Customize Render} {} ::msgcat::mcset ca {CUSTOMLABELS record not processed} {} ::msgcat::mcset ca {Cut elements will be included in the division.} {} ::msgcat::mcset ca {Cut elements will NOT be included in the division.} {} ::msgcat::mcset ca {Cut not valid.} {} ::msgcat::mcset ca {Cut Plane} {} ::msgcat::mcset ca {Cut Plane Read} {} ::msgcat::mcset ca {Cut plane save file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {Cut Volume/Surface sets with 2/3 points, succesion} {} ::msgcat::mcset ca {Cut Wire} {} ::msgcat::mcset ca {Cut Wire created: %d edges.} {} ::msgcat::mcset ca Cuts Talls ::msgcat::mcset ca {CutSet '%s' is deleted.} {} ::msgcat::mcset ca {Cutting hexaedrical meshes.1.} {} ::msgcat::mcset ca {Cutting Mesh} {} ::msgcat::mcset ca {Cutting meshes.1.} {} ::msgcat::mcset ca {Cutting meshes.2.} {} ::msgcat::mcset ca {Cutting triangles} {} ::msgcat::mcset ca {D - Duplist field in ZONE record not supported} {} ::msgcat::mcset ca {D. Vectores '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Data has changed. Do you want to save it?} {} ::msgcat::mcset ca {Data units} {} ::msgcat::mcset ca {Data will be converted to new problemtype if possible. Some data may be lost} {} ::msgcat::mcset ca {Debug Mesh: Readed %s nodes, %s elements} {} ::msgcat::mcset ca {Debug mesher} {} ::msgcat::mcset ca {Debug mesher post} {} ::msgcat::mcset ca {Decrement factor must be from 0 to 1. Use Decrement=value} {} ::msgcat::mcset ca {Def. Max Color} {} ::msgcat::mcset ca {Def. Min Color} {} ::msgcat::mcset ca {Default Analysis/Step} {} ::msgcat::mcset ca {Default gauss points not defined, } {} ::msgcat::mcset ca Defaults Defectes ::msgcat::mcset ca {defaults type} {} ::msgcat::mcset ca Define Definir ::msgcat::mcset ca {Define Limits} {} ::msgcat::mcset ca {Definition of problem needed before creating data. Leaving..} {} ::msgcat::mcset ca {Deform mesh} {} ::msgcat::mcset ca DEFORMATION {} ::msgcat::mcset ca Deformation Deformació ::msgcat::mcset ca {Deformation type will now use '%s' results.} {} ::msgcat::mcset ca {Deformations are done using '%s' results. Which should I use now?} {} ::msgcat::mcset ca Deformed {} ::msgcat::mcset ca {Deforming Mesh with factor %g.} {} ::msgcat::mcset ca {Deforming Mesh:} {} ::msgcat::mcset ca Degree Grau ::msgcat::mcset ca {Degree Elevate} {} ::msgcat::mcset ca {Degree elevated in u sense to %i. Continue picking (ESC to leave)} {} ::msgcat::mcset ca {Degree elevated in v sense to %i. Continue picking (ESC to leave)} {} ::msgcat::mcset ca {Degree elevated to %i. Continue picking (ESC to leave)} {Grau elevat a %i. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Degree of curve must be between 2 and 20. Try again} {} ::msgcat::mcset ca {Degree of elements changed to normal} {El grau dels elements ha canviat a normal} ::msgcat::mcset ca {Degree of elements changed to quadratic} {El grau dels elements ha canviat a quadràtic} ::msgcat::mcset ca {Degree of elements changed to quadratic 9} {El grau dels elements ha canviat a quadràtic 9} ::msgcat::mcset ca {Degree U Elevate} {} ::msgcat::mcset ca {Degree V Elevate} {} ::msgcat::mcset ca Degree: {} ::msgcat::mcset ca Degrees Graus ::msgcat::mcset ca {Delay '%s' not correct.} {} ::msgcat::mcset ca Delay: {} ::msgcat::mcset ca Delete Borrar ::msgcat::mcset ca {Delete %s} {} ::msgcat::mcset ca {Delete a layer.} {} ::msgcat::mcset ca {Delete all} {Borrar tot} ::msgcat::mcset ca {Delete calc files} {} ::msgcat::mcset ca {Delete customized render mode} {} ::msgcat::mcset ca {Delete last view} {} ::msgcat::mcset ca {Delete remote results} {} ::msgcat::mcset ca {Delete selected accelerator from macro} {} ::msgcat::mcset ca {Delete table from window} {} ::msgcat::mcset ca {Delete Volumes/Surfaces/Cuts} {} ::msgcat::mcset ca {Deleted %d elems and created %d new improved elems} {} ::msgcat::mcset ca {Deleted %d nodes.} {} ::msgcat::mcset ca {Deleted %i %ss. Leaving deleting function} {Borrades %i %ss. Sortint de funció de borrat} ::msgcat::mcset ca {deleted %i elements and %i nodes and mesh NOT renumbered} {} ::msgcat::mcset ca {deleted %i elements and %i nodes and mesh renumbered} {} ::msgcat::mcset ca {Deleted %i local axes. Leaving} {Borrats %i eixos locals. Sortint} ::msgcat::mcset ca {Deleted current custom render '%s'} {} ::msgcat::mcset ca {Deleted dimension whith null text.} {} ::msgcat::mcset ca {Deleted interval %i. Using interval %i} {Borrat interval %i. Usant interval %i} ::msgcat::mcset ca {Deleted material '%s' and unassigned from %i entities} {} ::msgcat::mcset ca {Deleted one material. Leaving} {} ::msgcat::mcset ca {Deleted results of process:%s} {} ::msgcat::mcset ca {Deletes current macro.\nControl-button1 deletes all macros.} {} ::msgcat::mcset ca {deleting remote results} {} ::msgcat::mcset ca {dem < 0, normals of} {} ::msgcat::mcset ca {dem == 0, normals of} {} ::msgcat::mcset ca {Depending on the selected field, 'yes', 'no' or 'beginner', some options are asked to the user inside a new window or with a message in the regular messages window.} {} ::msgcat::mcset ca {Deselected Stream Line # %d of mesh %d.} {} ::msgcat::mcset ca Design: {} ::msgcat::mcset ca Detail {} ::msgcat::mcset ca Details {} ::msgcat::mcset ca {Dialog box} {} ::msgcat::mcset ca {Dialog browser} {} ::msgcat::mcset ca {Dialog window} {} ::msgcat::mcset ca {didn't painted} {} ::msgcat::mcset ca {Diferences between coordinates of vectors are: %f,%f,%f} {} ::msgcat::mcset ca Difference {} ::msgcat::mcset ca {DIFFUSE component color} {} ::msgcat::mcset ca {dimension %i doesn't exist. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca Dimensions {} ::msgcat::mcset ca Direction {} ::msgcat::mcset ca Disable {} ::msgcat::mcset ca Disabled {} ::msgcat::mcset ca {Disk KB} {} ::msgcat::mcset ca Dismiss {} ::msgcat::mcset ca {Display coordinates} {} ::msgcat::mcset ca {Display info} {} ::msgcat::mcset ca {Display Style} {} ::msgcat::mcset ca {Display the current coordinates.\nTo hide, see Utilities->Preferences->General} {} ::msgcat::mcset ca {Display Vectors} {} ::msgcat::mcset ca {Displaying covering mesh at distance %g} {} ::msgcat::mcset ca {Displaying covering mesh at same distance %g} {} ::msgcat::mcset ca distance {} ::msgcat::mcset ca {Distance factor set to %g.} {} ::msgcat::mcset ca {Distance too small, try again ( entered: %g, recommended: %g)} {} ::msgcat::mcset ca {Distance=%lg . Enter 1st point (ESC to leave)} {} ::msgcat::mcset ca Distance=%s {} ::msgcat::mcset ca {Distance=%s. Enter 1st point (ESC to leave)} {} ::msgcat::mcset ca Distribution: {} ::msgcat::mcset ca {Divide by selection} {} ::msgcat::mcset ca {Divide lines} {} ::msgcat::mcset ca {Divide surface sets} {} ::msgcat::mcset ca {Divide volume sets} {} ::msgcat::mcset ca {Divide will be exact.} {} ::msgcat::mcset ca {Divide will not be exact.} {} ::msgcat::mcset ca {Divided %i lines and created %i intersection points. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Divided %i lines. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Dividing Mesh} {} ::msgcat::mcset ca {Dividing mesh into connex components...} {} ::msgcat::mcset ca {Dividing Set} {} ::msgcat::mcset ca {Do extrude} {Fer extrusió} ::msgcat::mcset ca {Do it} {} ::msgcat::mcset ca {Do you really want to exit?} {} ::msgcat::mcset ca {Do you want Massive Bodies?} {} ::msgcat::mcset ca {Do you want Opaque Legends?} {} ::msgcat::mcset ca {Do you want the binary files to be compressed?} {} ::msgcat::mcset ca {Do you want the binary files to be compressed? y/n} {} ::msgcat::mcset ca {Do you want to consider locally the process as killed?} {} ::msgcat::mcset ca {Do you want to recover the last backup file (date %s)?} {} ::msgcat::mcset ca {Do you want to send the data with encryption?} {} ::msgcat::mcset ca {Do you want to send the data without encryption?} {} ::msgcat::mcset ca {Do you want to Show Axes?} {} ::msgcat::mcset ca {Do you want to Show Legends?} {} ::msgcat::mcset ca {Do you want to stop communication and perform the Update?} {} ::msgcat::mcset ca {Do you want to try later or consider locally as killed?} {} ::msgcat::mcset ca {Doing Pixmap PostScripts.} {} ::msgcat::mcset ca {Doing Vectorial PostScripts.} {} ::msgcat::mcset ca {Don't forget to generate the mesh} {No oblidi de generar la malla} ::msgcat::mcset ca {Don't know what to do with} {} ::msgcat::mcset ca {Don't show it again} {} ::msgcat::mcset ca Done {} ::msgcat::mcset ca {Done undo} {} ::msgcat::mcset ca Done. {} ::msgcat::mcset ca {Double click to see the elements filtered with a x-value.} {} ::msgcat::mcset ca {Double-click first on the graph\n to select filtered elements} {} ::msgcat::mcset ca {DoublePlex::Add. Invalid Double index(5 %d} {} ::msgcat::mcset ca {DoublePlex::add_at. Invalid Double index(1) %d} {} ::msgcat::mcset ca {DoublePlex::cache. Invalid Double index(2) %d} {} ::msgcat::mcset ca {DoublePlex::set_at. Invalid Double index(1) %d} {} ::msgcat::mcset ca Download {} ::msgcat::mcset ca {Download results} {} ::msgcat::mcset ca {downloading results} {} ::msgcat::mcset ca dpi {} ::msgcat::mcset ca Draw Dibuixar ::msgcat::mcset ca {Draw all} {Dibuixar tot} ::msgcat::mcset ca {Draw graphs} {} ::msgcat::mcset ca {Draw interiors} {} ::msgcat::mcset ca {Draw quadratic elements:} {} ::msgcat::mcset ca {Drawing %d entities.} {} ::msgcat::mcset ca {Drawing %i entities} {Dibuixant %i entitats} ::msgcat::mcset ca {Drawing %i local axes} {Dibuixar %i eixos locals} ::msgcat::mcset ca {Drawing %s. Press 'Escape' to leave} {} ::msgcat::mcset ca {Drawing dynamic line} {} ::msgcat::mcset ca {Drawing local axes.} {} ::msgcat::mcset ca {Drawing Local Axes:} {} ::msgcat::mcset ca {Drawing Matrices:} {} ::msgcat::mcset ca {Drawing only point} {} ::msgcat::mcset ca {Drawing point and normal} {} ::msgcat::mcset ca {Drawing Stream Lines:} {} ::msgcat::mcset ca {Drawing Vectors:} {} ::msgcat::mcset ca {DrawMesh NoDrawMesh ReMesh NoReMesh RemoveLines Escape} {} ::msgcat::mcset ca {DrawMesh NoDrawMesh RemoveLines Escape} {} ::msgcat::mcset ca {Drawning area %d of %d} {} ::msgcat::mcset ca {DrawQuadraticElements value incorrect %s, must be one of No / AsLines / AsCurve.} {} ::msgcat::mcset ca {DT - DataTypelist field in ZONE record not supported} {} ::msgcat::mcset ca {Duplicate entities} {Duplicar entitats} ::msgcat::mcset ca {DXF file '%s' written OK. Leaving} {} ::msgcat::mcset ca {DXF read} {} ::msgcat::mcset ca {DXF write} {} ::msgcat::mcset ca {DXF_MLINE too much number or parameters code 41} {} ::msgcat::mcset ca {Dynamic update} {} ::msgcat::mcset ca {E1 - Linea: '%s'.\n} {} ::msgcat::mcset ca {E3 - Linea: '%s'.\n} {} ::msgcat::mcset ca {E4 - Linea: '%s'.\n} {} ::msgcat::mcset ca {E5 - Linea: '%s'.\n} {} ::msgcat::mcset ca {E6 - Linea: '%s'.\n} {} ::msgcat::mcset ca {Each layer separately} {} ::msgcat::mcset ca {Edit Coment line} {} ::msgcat::mcset ca {Edit element text} {} ::msgcat::mcset ca {Edit NURBS %s} {} ::msgcat::mcset ca {Edit NURBS %s %d} {} ::msgcat::mcset ca {Elem %d with MeshingData} {} ::msgcat::mcset ca {Elem::RepairQuadraticNodesInNegativeVolumeElements. Not implemented for quadratic prisma} {} ::msgcat::mcset ca {Elem::RepairQuadraticNodesInNegativeVolumeElements.Element type %d unexpected} {} ::msgcat::mcset ca Element Element ::msgcat::mcset ca {Element '%d' deleted.} {} ::msgcat::mcset ca {Element '%d' modified.} {} ::msgcat::mcset ca {Element concentration at End:\nPositive value to concentrate\n Negative to separate} {} ::msgcat::mcset ca {Element concentration at start:\nPositive value to concentrate\n Negative to separate} {} ::msgcat::mcset ca {Element number out of range?} {} ::msgcat::mcset ca {Element out of range} {} ::msgcat::mcset ca {Element vol} {} ::msgcat::mcset ca Elements Elements ::msgcat::mcset ca {Elements read:} {Elements llegits:} ::msgcat::mcset ca {ELEMENTS\n} {ELEMENTS\n} ::msgcat::mcset ca {elemnum,nodnum must be entered} {} ::msgcat::mcset ca {elemnum,nodnum>0 must be entered} {} ::msgcat::mcset ca {Elevations not will be shown} {} ::msgcat::mcset ca {Elevations of the whole line will be shown} {} ::msgcat::mcset ca Enable {} ::msgcat::mcset ca Enabled {} ::msgcat::mcset ca End {} ::msgcat::mcset ca {End base. Enter Points} {} ::msgcat::mcset ca {End joining. Enter new Points} {} ::msgcat::mcset ca {End Weight} {} ::msgcat::mcset ca {Ending . . .} {} ::msgcat::mcset ca Endless {} ::msgcat::mcset ca {Enter %s} {Entri %s} ::msgcat::mcset ca {Enter %s item.} {} ::msgcat::mcset ca {Enter %s to assign to list} {} ::msgcat::mcset ca {Enter %s to select} {} ::msgcat::mcset ca {Enter %s to unassign Material} {} ::msgcat::mcset ca {Enter %s, subField number %i} {} ::msgcat::mcset ca {Enter %s, subField number 1} {} ::msgcat::mcset ca {Enter %ss to delete (ESC to leave)} {} ::msgcat::mcset ca {Enter 'yes' if you want to improve generated surfmeshes , else enter 'no'. Current value: %d} {} ::msgcat::mcset ca {Enter 'yes' if you want to improve the mesh, else enter 'no'. Current value: %d} {} ::msgcat::mcset ca {Enter 1st destination point} {} ::msgcat::mcset ca {Enter 1st point} {} ::msgcat::mcset ca {Enter 1st point (ESC to leave)} {} ::msgcat::mcset ca {Enter 1st point of NURBS line (ESC to leave)} {} ::msgcat::mcset ca {Enter 1st point of spline (ESC to leave)} {} ::msgcat::mcset ca {Enter 1st point to define arc (ESC to leave)} {} ::msgcat::mcset ca {Enter 1st point to define the plane} {} ::msgcat::mcset ca {Enter 1st point to define the translation} {} ::msgcat::mcset ca {Enter 1st point to define zoom} {} ::msgcat::mcset ca {Enter 1st source point} {} ::msgcat::mcset ca {Enter 1st tangent (ESC to leave)} {} ::msgcat::mcset ca {Enter 2 points to define plane orthogonal to window} {} ::msgcat::mcset ca {Enter 2 points to define the succesion axis} {} ::msgcat::mcset ca {Enter 2nd destination point} {} ::msgcat::mcset ca {Enter 2nd point} {} ::msgcat::mcset ca {Enter 2nd point (ESC to leave)} {} ::msgcat::mcset ca {Enter 2nd point of the arc} {Entri el 2on punt del arc} ::msgcat::mcset ca {Enter 2nd point to define plane} {} ::msgcat::mcset ca {Enter 2nd point to define translation} {} ::msgcat::mcset ca {Enter 2nd point to define zoom} {} ::msgcat::mcset ca {Enter 2nd source point} {} ::msgcat::mcset ca {Enter 3rd destination point} {} ::msgcat::mcset ca {Enter 3rd source point} {} ::msgcat::mcset ca {Enter 3th point of the arc} {Entri el 3er punt del arc} ::msgcat::mcset ca {Enter 3th point to define plane} {} ::msgcat::mcset ca {Enter 4-sided or NURBS surface} {} ::msgcat::mcset ca {Enter a center for the base} {} ::msgcat::mcset ca {Enter a center for the circle} {} ::msgcat::mcset ca {Enter a center for the cone} {} ::msgcat::mcset ca {Enter a center for the cylinder} {} ::msgcat::mcset ca {Enter a center for the polygon} {} ::msgcat::mcset ca {Enter a center for the prism} {} ::msgcat::mcset ca {Enter a center for the sphere} {} ::msgcat::mcset ca {Enter a center for the torus} {} ::msgcat::mcset ca {Enter a comma separated list of all the knots} {} ::msgcat::mcset ca {Enter a comma separated list of all the weights} {} ::msgcat::mcset ca {Enter a normal for the circle} {} ::msgcat::mcset ca {Enter a normal for the cone's base} {} ::msgcat::mcset ca {Enter a normal for the cylinder's base} {} ::msgcat::mcset ca {Enter a normal for the polygon} {} ::msgcat::mcset ca {Enter a normal for the polygon's base} {} ::msgcat::mcset ca {Enter a normal for the rectangle} {} ::msgcat::mcset ca {Enter a normal for the torus} {} ::msgcat::mcset ca {Enter a point to define center of rotation} {} ::msgcat::mcset ca {Enter a radius for the circle} {} ::msgcat::mcset ca {Enter a radius for the cone's base} {} ::msgcat::mcset ca {Enter a radius for the cylinder's base} {} ::msgcat::mcset ca {Enter a radius for the polygon} {} ::msgcat::mcset ca {Enter a radius for the polygon's base} {} ::msgcat::mcset ca {Enter a radius for the sphere} {} ::msgcat::mcset ca {Enter a scale factor (%g)} {} ::msgcat::mcset ca {Enter analysis to use} {} ::msgcat::mcset ca {Enter analysis type} {} ::msgcat::mcset ca {Enter angle (in degrees) to define local Y axe} {} ::msgcat::mcset ca {Enter angle of elevation from plane XY} {} ::msgcat::mcset ca {Enter angle of point of view in plane XY from axe X} {} ::msgcat::mcset ca {Enter angle to make division} {} ::msgcat::mcset ca {Enter another cut plane: enter 2 points to define plane orthogonal to window} {} ::msgcat::mcset ca {Enter another node (ESC to leave)} {} ::msgcat::mcset ca {Enter another number of cells to assign to lines} {} ::msgcat::mcset ca {Enter another point (ESC to leave)} {} ::msgcat::mcset ca {Enter another point to define the rotation axe} {} ::msgcat::mcset ca {Enter answer of field %i} {Entri contestació del camp %i} ::msgcat::mcset ca {Enter arc} {} ::msgcat::mcset ca {Enter Arc (ESC to leave)} {} ::msgcat::mcset ca {Enter B:} {} ::msgcat::mcset ca {Enter Background Mesh file name} {} ::msgcat::mcset ca {Enter base NurbSurface to trimm or untrimm (ESC to leave)} {} ::msgcat::mcset ca {Enter boundary triangles to generate a tetrahedral mesh} {} ::msgcat::mcset ca {Enter C:} {} ::msgcat::mcset ca {Enter center} {} ::msgcat::mcset ca {Enter center of rotation} {} ::msgcat::mcset ca {Enter centerline radius} {} ::msgcat::mcset ca {Enter collapseEdgesFactor: min=0 max=1. Current value: %.6f} {} ::msgcat::mcset ca {Enter Colour Key no. %d} {} ::msgcat::mcset ca {Enter commands} {} ::msgcat::mcset ca {Enter component} {} ::msgcat::mcset ca {Enter component for X axis} {} ::msgcat::mcset ca {Enter component for Y axis} {} ::msgcat::mcset ca {Enter Condition field} {Entri camp de la condició} ::msgcat::mcset ca {Enter Condition name} {Entri el nom de la condició} ::msgcat::mcset ca {Enter contour lines for the surface or option 'Untrimm'} {} ::msgcat::mcset ca {Enter coordinate y} {} ::msgcat::mcset ca {Enter cross section radius} {} ::msgcat::mcset ca {Enter custom render name to create.} {} ::msgcat::mcset ca {Enter custom render name to delete.} {} ::msgcat::mcset ca {Enter custom render name to set as current.} {} ::msgcat::mcset ca {Enter custom render to rename.} {} ::msgcat::mcset ca {Enter D:} {} ::msgcat::mcset ca {Enter debug data} {} ::msgcat::mcset ca {Enter deformation vector name} {} ::msgcat::mcset ca {Enter degree of elements} {Entri grau dels elements} ::msgcat::mcset ca {Enter degree of elements (Quadratic/Quadratic9/normal)} {Entri grau dels elements (Quadràtic/Quadràtic9/Normal)} ::msgcat::mcset ca {Enter degree of the curve (2...20)} {Entri grau de la corba (2..20)} ::msgcat::mcset ca {Enter destination point (ESC to leave)} {} ::msgcat::mcset ca {Enter detail level of line elements ( 4 sided or 8 sided prismas)} {} ::msgcat::mcset ca {Enter detail level of Stream Lines ( 4 sided or 8 sided prismas)} {} ::msgcat::mcset ca {Enter discrete lines to define NurbSurface} {} ::msgcat::mcset ca {Enter discrete lines to define NurbSurface (ESC to leave)} {} ::msgcat::mcset ca {Enter discrete points to define NurbSurface (ESC to leave)} {} ::msgcat::mcset ca {Enter display style you want to use.} {} ::msgcat::mcset ca {Enter division lines to split the surface} {} ::msgcat::mcset ca {Enter elements that define the mesh.} {} ::msgcat::mcset ca {Enter elements to assign to Material: %s} {Entri elements per assignar al material: %s} ::msgcat::mcset ca {Enter elements to delete} {} ::msgcat::mcset ca {Enter elements to smooth} {} ::msgcat::mcset ca {Enter elements to unassign its material} {Entri elements per desassignar el seu material} ::msgcat::mcset ca {Enter Elements to unassign Material} {} ::msgcat::mcset ca {Enter elements to uncollapse} {} ::msgcat::mcset ca {Enter entity type to assign label} {} ::msgcat::mcset ca {Enter far limit} {} ::msgcat::mcset ca {Enter FEMAP file to read} {} ::msgcat::mcset ca {Enter field %i. Question answer} {Entri camp %i. Pregunta contestació} ::msgcat::mcset ca {Enter first 2D surface (ESC to leave)} {} ::msgcat::mcset ca {Enter first an accelerator} {} ::msgcat::mcset ca {Enter FIRST comment line:} {} ::msgcat::mcset ca {Enter first corner point} {} ::msgcat::mcset ca {Enter first corner point (ESC to leave)} {} ::msgcat::mcset ca {Enter first NurbSurface (ESC to leave)} {} ::msgcat::mcset ca {Enter first NurbSurface to intersect (ESC to leave)} {} ::msgcat::mcset ca {Enter first point (ESC to leave)} {} ::msgcat::mcset ca {Enter first point for the intersection} {Entri primer punt per la intersecció} ::msgcat::mcset ca {Enter first Volume (ESC to leave)} {} ::msgcat::mcset ca {Enter height} {} ::msgcat::mcset ca {Enter Height Margin ( Postscript only) [ %3.2g inches].} {} ::msgcat::mcset ca {Enter Image Height ( Postscript only) [ %3.2g inches].} {} ::msgcat::mcset ca {Enter Image Resolution ( Postscript only) [ %d DPI].} {} ::msgcat::mcset ca {Enter Image Width ( Postscript only) [ %3.2g inches].} {} ::msgcat::mcset ca {Enter improveSurfMeshesFactor: min=0 max=1. Current value: %.6f} {} ::msgcat::mcset ca {Enter Knot position (0.0 1):} {} ::msgcat::mcset ca {Enter the offset of vectors ( 0.0 - 1.0):} {} ::msgcat::mcset ca {Enter the parameters: {x left right} {y top bot} {z near far} {e diag} {v rotvec[3]} {r rotvecW} {m rotmar[4][4]}} {} ::msgcat::mcset ca {Enter the password:} {} ::msgcat::mcset ca {Enter the prefix of the new set(s):\n( GiD will create so many new sets as diferent types of elements have been selected)} {} ::msgcat::mcset ca {Enter the remote server for problem '%s'} {} ::msgcat::mcset ca {Enter the server information:} {} ::msgcat::mcset ca {Enter the server to perform the remote calculation:} {} ::msgcat::mcset ca {Enter the size of points ( %g - %g in steps of %g):} {} ::msgcat::mcset ca {Enter the size of stream lines ( -1.0 - without render, > 0 < %g - with render):} {} ::msgcat::mcset ca {Enter the stream vector} {} ::msgcat::mcset ca {Enter the title of the legend:} {} ::msgcat::mcset ca {Enter the type of entity to witch assign this condition} {Entri tipus d'entitat a la que assignar aquesta condició} ::msgcat::mcset ca {Enter the width between iso-surfaces: \n Results interval: [ Min: %g - Max: %g]} {} ::msgcat::mcset ca {Enter the width of line elements ( < 0 - fixed size without render, 0 - no line, > 0 < %g - with render):} {} ::msgcat::mcset ca {Enter the width of the interval that Contour Fill should use:} {} ::msgcat::mcset ca {Enter THIRD comment line:} {} ::msgcat::mcset ca {Enter third point (ESC to leave)} {} ::msgcat::mcset ca {Enter TITLE for graph %d:} {} ::msgcat::mcset ca {Enter type of dimension to create} {} ::msgcat::mcset ca {Enter type of dimension to create (ESC to leave)} {} ::msgcat::mcset ca {Enter Type of element to Assign to entities} {Entri tipus de element per assignar a les entitats} ::msgcat::mcset ca {Enter type of entities to assign this criteria} {Entri tipus de entitat a la que assignar aquest criteri} ::msgcat::mcset ca {Enter type of entities to assign to Layer %s.} {Entri tipus d'entitats per assignar a la capa '%s'} ::msgcat::mcset ca {Enter type of entities to send to the layer back} {} ::msgcat::mcset ca {Enter type of entities to send to the layer back (opposite)} {} ::msgcat::mcset ca {Enter type of entity to %s} {} ::msgcat::mcset ca {Enter type of entity to collapse (with ImportTolerance)} {} ::msgcat::mcset ca {Enter type of entity to copy ( Nodes, Elements)} {} ::msgcat::mcset ca {Enter type of entity to copy:} {} ::msgcat::mcset ca {Enter type of entity to draw its normal} {Entri tipus d'entitat per dibuixar la seva normal} ::msgcat::mcset ca {Enter type of entity to list} {Entri tipus de entitat per llistar} ::msgcat::mcset ca {Enter type of entity to list or status} {Entri tipus de entitat o 'Status'} ::msgcat::mcset ca {Enter type of entity to select} {} ::msgcat::mcset ca {Enter type of entity to unassign its material} {Entri tipus d'entitat a la que desassignar aquest material} ::msgcat::mcset ca {Enter type of entity to uncollapse} {} ::msgcat::mcset ca {Enter type of entity to uncollapse (Lines, Surfaces)} {} ::msgcat::mcset ca {Enter type of entity to witch assign linear element} {Entri tipus de entitat a la que assignar element lineal} ::msgcat::mcset ca {Enter type of entity to witch assign OnlyPoints element} {} ::msgcat::mcset ca {Enter type of entity to witch assign Sphere element} {} ::msgcat::mcset ca {Enter type of entity to witch assign this Material} {Entri tipus d'entitat a la que assignar aquest material} ::msgcat::mcset ca {Enter type of entity to witch assign this size or option} {Entri tipus de entitat a la que assignar aquest tamany o opció} ::msgcat::mcset ca {Enter type of entity: } {} ::msgcat::mcset ca {Enter type of new window} {} ::msgcat::mcset ca {Enter type of object to create} {} ::msgcat::mcset ca {Enter type of object to create (ESC to leave)} {} ::msgcat::mcset ca {Enter type of zoom} {} ::msgcat::mcset ca {Enter U parameter (0.0 2*PI, changed to 2*PI} {} ::msgcat::mcset ca {Error in TCL file. Nothing written} {Error en fitxer TCL. Res escrit} ::msgcat::mcset ca {Error in Tcl Script} {} ::msgcat::mcset ca {Error in TesselatorError is: %i} {} ::msgcat::mcset ca {Error in TransformQuad::InvTransf. Point out of range. XNorm=%lf} {} ::msgcat::mcset ca {Error info} {} ::msgcat::mcset ca {Error meshing line %d, element with size=%lf < min=%lf} {} ::msgcat::mcset ca {Error meshing line %d, element with size=%lf > max=%lf} {} ::msgcat::mcset ca {Error name is: '%s'} {} ::msgcat::mcset ca {Error reading DXF polyface mesh, handle %s} {} ::msgcat::mcset ca {Error reading file} {} ::msgcat::mcset ca {Error reading from file '%s' - %s.} {} ::msgcat::mcset ca {Error reading GaussPoints section} {} ::msgcat::mcset ca {Error reading GiD mesh.} {} ::msgcat::mcset ca {Error reading meshing data in figure %i} {} ::msgcat::mcset ca {Error reading ResultRangesTable section} {} ::msgcat::mcset ca {Error retrieving the module} {} ::msgcat::mcset ca {Error running process.} {} ::msgcat::mcset ca {Error saving into file '%s' - %s.} {} ::msgcat::mcset ca {Error splitting NurbSurface. Line %i is not over the NURBS} {} ::msgcat::mcset ca {Error trying to open temporal file %s.} {} ::msgcat::mcset ca {Error when assigning mesh entities to condition '%s'. All mesh entities have been cleared} {} ::msgcat::mcset ca {Error when transfering condition '%s' from geometry to mesh%s. It has not been transferred} {} ::msgcat::mcset ca {Error writing DXF surface %d, can't generate a triangulation} {} ::msgcat::mcset ca {Error writing file for template} {} ::msgcat::mcset ca {Error writing surfmesh %d in DXF file} {} ::msgcat::mcset ca {Error, The normal of the surface %d must point to Z axis} {} ::msgcat::mcset ca {Error, Background Mesh Not Readed.} {} ::msgcat::mcset ca {Error, bad coordinate system type=%d} {} ::msgcat::mcset ca {Error, bad normal in element %d.} {} ::msgcat::mcset ca {Error, bad surface number %d, contour lines not close} {} ::msgcat::mcset ca {Error, bad surface number %d, contour lines not close (Check point %i).} {} ::msgcat::mcset ca {Error, bad surface number %d, contour lines not close.} {} ::msgcat::mcset ca {Error, bad surface, contour lines not close.} {} ::msgcat::mcset ca {Error, bad surface, contour lines not close. (Check point %i).} {} ::msgcat::mcset ca {Error, cannot open file '%s'} {} ::msgcat::mcset ca {Error, cannot rename '%s' to '%s'} {} ::msgcat::mcset ca {Error, Cond::ClearOneEntity. Incorrect position %i of layer %s to clear} {} ::msgcat::mcset ca {Error, contour lines close %d regions.} {} ::msgcat::mcset ca {Error, Coon surface number %d with holes.} {} ::msgcat::mcset ca {Error, Coon surface with holes.} {} ::msgcat::mcset ca {Error, CURVE:%s, with not continuos segments} {} ::msgcat::mcset ca {Error, custom render '%s' not exists} {} ::msgcat::mcset ca {Error, element %i not read, excessive values %s} {} ::msgcat::mcset ca {Error, element %i. Node %i. Not read} {} ::msgcat::mcset ca {Error, End Of File unexpected, bad STL file.} {} ::msgcat::mcset ca {Error, FACE:%s, fail continuity in contour, lines:} {} ::msgcat::mcset ca {Error, FACE:%s, fail continuity in hole, lines: } {} ::msgcat::mcset ca {Error, grid needed for coordinate system definition %d not found} {} ::msgcat::mcset ca {Error, line %d,Unsupported elem %d with %d nodes } {} ::msgcat::mcset ca {Error, line %d: Bad continuation line identifier '%s', expected '%s'} {} ::msgcat::mcset ca {Error, line %d: Element %d: node num %d not exist} {} ::msgcat::mcset ca {Error, line %d: Expected continuation line of identifier %s starting with + or *} {} ::msgcat::mcset ca {Error, not exist node %d. in element %d} {} ::msgcat::mcset ca {Error, Not exists nodes or elements} {} ::msgcat::mcset ca {Error, Number of elements=%d, bad STL file.} {} ::msgcat::mcset ca {Error, Nº points must be a positive integer >=2} {} ::msgcat::mcset ca {Error, offset lines intersection fail} {} ::msgcat::mcset ca {Error, parameter calculation fail} {} ::msgcat::mcset ca {Error, parameter of CONS:%s =%g out range [%g,%g] of CURVE:%s, full CURVE is used} {} ::msgcat::mcset ca {Error, Parameter= %lf: number of cut points=%d} {} ::msgcat::mcset ca {Error, Parameter= %lf: Uneven number of cut points=%d} {} ::msgcat::mcset ca {Error, surface %d must be in the XY plane} {} ::msgcat::mcset ca {Error, t0 must be a real number} {} ::msgcat::mcset ca {Error, t1 must be a real number} {} ::msgcat::mcset ca {Error, there is an error in the mathematical expression '%s'} {} ::msgcat::mcset ca {Error, there is no mesh to copy or move. Try again} {} ::msgcat::mcset ca {Error, there is no mesh to list. Try again} {} ::msgcat::mcset ca {Error, there is no mesh to select. Try again} {} ::msgcat::mcset ca {Error, trimmed surface (IGES 144,Dir=%d) with lines[%d]=NULL} {} ::msgcat::mcset ca {Error, unexpected element type: %d.} {} ::msgcat::mcset ca {ERROR: too much nodes at the same position.} {} ::msgcat::mcset ca {Error: %s} {} ::msgcat::mcset ca {Error: %s in line %i: in file '%s':\n//%s//} {} ::msgcat::mcset ca {Error: 'BadAngle' filter does not exist anymore. Use 'BadMinAngle' or 'BadMaxAngle' filters either} {} ::msgcat::mcset ca {Error: after 'strcmp' or 'strcasecmp' } {} ::msgcat::mcset ca {Error: all flags must be before file name} {} ::msgcat::mcset ca {Error: bad elem %d. Can't continue.} {} ::msgcat::mcset ca {Error: bad mode option.} {} ::msgcat::mcset ca {Error: bad rotating option.} {} ::msgcat::mcset ca {Error: Bad Surface defined only with two straight lines} {} ::msgcat::mcset ca {Error: bad type of entity.} {} ::msgcat::mcset ca {Error: Can't create this hole. Try again} {} ::msgcat::mcset ca {Error: cannot create surfmeshes from meshes of element type different from triangles or quadrilaterals} {} ::msgcat::mcset ca {Error: Cannot open %1\$s: %2\$s} {} ::msgcat::mcset ca {Error: Choosing twice the same node. Try again} {} ::msgcat::mcset ca {Error: Choosing twice the same point. Try again} {Error: No es pot escollir dos cops el mateix punt. Intenti-ho de nou.} ::msgcat::mcset ca {Error: current problemtype cannot be found} {} ::msgcat::mcset ca {Error: elem %d has no normal. Nodes are [ %d, %d, %d ]. Deleting element from mesh...} {} ::msgcat::mcset ca {Error: element %d has two or more adyacent elements at the same edge -> elem %d and elem %d. Cannot continue.} {} ::msgcat::mcset ca {Error: element type not valid} {} ::msgcat::mcset ca {Error: face %d has element num %d of face %d} {} ::msgcat::mcset ca {error: in %s command after > or >> need filename} {} ::msgcat::mcset ca {Error: in CModelUnits::GetGeometryUnit 'LENGTH' requested but not found} {} ::msgcat::mcset ca {error: in echo command after > or >> need filename} {} ::msgcat::mcset ca {Error: incorrect entity \"%s\", CONDITION must be over points, lines, surfaces or volumes} {} ::msgcat::mcset ca {Error: incorrect name '%s' with spaces in CONDITION name} {} ::msgcat::mcset ca {Error: incorrect operation pos=%i} {} ::msgcat::mcset ca {Error: incorrect operation pos=%i} {} ::msgcat::mcset ca {Error: info parametric, expected 3 coordinates} {} ::msgcat::mcset ca {Error: info parametric, expected coord|deriv_t|deriv_tt|t_fromcoord} {} ::msgcat::mcset ca {Error: info parametric, expected coord|deriv_u|deriv_v|deriv_uu|deriv_vv|deriv_uv|uv_fromcoord} {} ::msgcat::mcset ca {Error: info parametric, expected parameter 00 } {} ::msgcat::mcset ca {Error: usage: 'filter:EntityType=entitytype' with EntityType=} {} ::msgcat::mcset ca {Error: usage: 'filter:higherentity=N' with N>=0} {Error: ús: 'filtre:entordresuperior=N' amb N>=0} ::msgcat::mcset ca {Error: usage: 'filter:MaxLength=L' with L>0.0} {} ::msgcat::mcset ca {Error: usage: 'filter:MinLength=L' with L>0.0} {} ::msgcat::mcset ca {Error: VDA SURF=%s, patche %d=NULL} {} ::msgcat::mcset ca {Error: wrong number of copies to be made.} {} ::msgcat::mcset ca {error; usage: %s file.bat basename projectdirectory problemtypedirectory } {} ::msgcat::mcset ca {Errors found '%s'} {} ::msgcat::mcset ca {Errors found in data file (.prb) line=%i} {} ::msgcat::mcset ca {Errors found in data file (.prb) line=%i,} {} ::msgcat::mcset ca {Errors found in symbols file %s' in line %i} {} ::msgcat::mcset ca {Especification file not correct. Nothing written} {Fitxer d'especificacions no correcte. Res escrit} ::msgcat::mcset ca {Especification file: %s not correct. Nothing written} {Fitxer d'especificacions '%s' no correcte. Res escrit} ::msgcat::mcset ca Evaluation {} ::msgcat::mcset ca Every: {} ::msgcat::mcset ca Exact {} ::msgcat::mcset ca {Exclude local axes} {} ::msgcat::mcset ca {Execute current macro.} {} ::msgcat::mcset ca Exit {} ::msgcat::mcset ca {Exit GiD} {} ::msgcat::mcset ca {Expected (BEGIN TABLE | SYSTEM) | USER DEFINED | USE BASE SYSTEMS | DefineSymbol at line %1\$i in %2\$s} {} ::msgcat::mcset ca {Expected ENABLED | DISABLED at line %1\$i in %2\$s} {} ::msgcat::mcset ca {expected GID or PRJ in info unitssystems} {} ::msgcat::mcset ca {expected GID|PRJ|USERSYS|MODUNIT|PRBSYS|MAGUSED in info unitssystems} {} ::msgcat::mcset ca {exploding cuts} {} ::msgcat::mcset ca {Export as batch} {} ::msgcat::mcset ca {Export macros to file.} {} ::msgcat::mcset ca {Export results table} {} ::msgcat::mcset ca {Export tables to a file} {} ::msgcat::mcset ca {External materials} {} ::msgcat::mcset ca {Extrude %d %s . . . done} {} ::msgcat::mcset ca {Extrude Set} {} ::msgcat::mcset ca {Extrude set} {} ::msgcat::mcset ca {extrude set} {} ::msgcat::mcset ca {Extrude set to OFF} {} ::msgcat::mcset ca {Extrude set to ON for lines} {} ::msgcat::mcset ca {Extrude set to ON for surfaces} {} ::msgcat::mcset ca {Extrude set to ON for volumes} {} ::msgcat::mcset ca {Extrude surface} {} ::msgcat::mcset ca {Extruded %d %s} {} ::msgcat::mcset ca {Extruding %d %s} {} ::msgcat::mcset ca Extrusion {} ::msgcat::mcset ca {extrusion should be from the same mesh type, set/set or cut/cut} {} ::msgcat::mcset ca {Face is not correct} {} ::msgcat::mcset ca Factor {} ::msgcat::mcset ca factor: {} ::msgcat::mcset ca {Fail BASE64 decode algorithm} {} ::msgcat::mcset ca {Fail BASE64 encode algorithm} {} ::msgcat::mcset ca {Fail create hole in surf with lines: } {} ::msgcat::mcset ca {Fail create trim in surf, with lines: } {} ::msgcat::mcset ca {Fail MD5 encode algorithm} {} ::msgcat::mcset ca {Fail RSA decode algorithm} {} ::msgcat::mcset ca {Fail RSA encode algorithm} {} ::msgcat::mcset ca {Fail RSA genkey algorithm} {} ::msgcat::mcset ca {Fail to create NaturalBoundary: no initial line to extrude.} {} ::msgcat::mcset ca {Fail to create some surfmesh.} {} ::msgcat::mcset ca {Fail to extrude entities: path line has bad orientation.} {} ::msgcat::mcset ca {fail ToBreak in surf %d} {} ::msgcat::mcset ca Failed {} ::msgcat::mcset ca {Failed calc position of new node} {} ::msgcat::mcset ca {Failed calculating transformation} {} ::msgcat::mcset ca {Failed create face} {} ::msgcat::mcset ca {Failed creating intersection line. Leaving} {} ::msgcat::mcset ca {Failed entering octtree} {} ::msgcat::mcset ca {Failed find close faces to new node} {} ::msgcat::mcset ca {Failed remove face} {} ::msgcat::mcset ca {Failed to copy entities.} {} ::msgcat::mcset ca {Failed to extrude line %d.} {} ::msgcat::mcset ca {Failed to mesh %i lines. Use command 'meshview' to see the generated ones} {} ::msgcat::mcset ca {Failed to mesh %i surfaces. Use command 'meshview' to see the generated ones} {} ::msgcat::mcset ca {Failed to mesh %i volumes. Use command 'meshview' to see the generated ones} {} ::msgcat::mcset ca {Failed to project line, bad tangent vector in path line.} {} ::msgcat::mcset ca FAQ {} ::msgcat::mcset ca {Far plane:} {} ::msgcat::mcset ca {Fast rotation} {} ::msgcat::mcset ca {FEMAP Read} {} ::msgcat::mcset ca {Field %s not exist} {} ::msgcat::mcset ca {field doesn't exist. Try again (ESC to leave)} {Camp no existeix. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Field's color} {} ::msgcat::mcset ca {Field's value} {} ::msgcat::mcset ca {Figplex::cache. Invalid Figure index(2) %d} {} ::msgcat::mcset ca {FigPlex::set_at. Invalid Figure index(1) %d} {} ::msgcat::mcset ca {FigPlex::set_at. Repeated index %d in FigPlex} {} ::msgcat::mcset ca figure figura ::msgcat::mcset ca Figures {} ::msgcat::mcset ca File Fitxer ::msgcat::mcset ca {File %s read.} {} ::msgcat::mcset ca {File &name} {} ::msgcat::mcset ca {File &names} {} ::msgcat::mcset ca {File '%s' created. Hardcopy done OK. Leaving} {} ::msgcat::mcset ca {file '%s' exist. Overwrite?} {} ::msgcat::mcset ca {File '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {File '%s' not exists} {} ::msgcat::mcset ca {File cannot be written} {} ::msgcat::mcset ca {file error } {} ::msgcat::mcset ca {File In:} {} ::msgcat::mcset ca {File is more recent than last time read. Reread it?} {} ::msgcat::mcset ca {File name is not correct} {} ::msgcat::mcset ca {File name: '%s'.} {} ::msgcat::mcset ca {File no correct. Nothing read.} {Fitxer no correcte. Res llegit} ::msgcat::mcset ca {File Out:} {} ::msgcat::mcset ca {File Storage after download} {} ::msgcat::mcset ca {File written OK} {Fitxer escrit correctament} ::msgcat::mcset ca {File written to} {} ::msgcat::mcset ca File: {} ::msgcat::mcset ca {filename must be between \\\", } {} ::msgcat::mcset ca {Files of &type} {} ::msgcat::mcset ca {Filled elevation will be shown} {} ::msgcat::mcset ca {Filled line} {} ::msgcat::mcset ca Filter {} ::msgcat::mcset ca filter filtre ::msgcat::mcset ca {Filter cleared} {} ::msgcat::mcset ca {Filter options are: \n HigherEntity\n MinLength\n MaxLength\n EntityType\n BadMinAngle\n BadMaxAngle} {} ::msgcat::mcset ca {Filtered %i entities} {%i entitats filtrades} ::msgcat::mcset ca {Final number of surfaces=0} {} ::msgcat::mcset ca {Finding edges} {} ::msgcat::mcset ca Finish {} ::msgcat::mcset ca {First intersection line can have surfaces over it, but second line can not. Can continue} {} ::msgcat::mcset ca {First intersection line can have surfaces over it, but they can not be Coon surfaces. Convert to NURBS. Can continue} {} ::msgcat::mcset ca {First point} {Primer punt} ::msgcat::mcset ca {First point is not contained in the surface} {} ::msgcat::mcset ca {first point.} {} ::msgcat::mcset ca {First select any result representation, please} {} ::msgcat::mcset ca {First tangent not defined. Enter second tangent} {Primera tangent no definida. Entri la segona tangent} ::msgcat::mcset ca {Fix boundary} {} ::msgcat::mcset ca {Fix interval width:} {} ::msgcat::mcset ca {Fix or free the boundary control points.} {} ::msgcat::mcset ca {Fixed distance} {} ::msgcat::mcset ca {Fixed Font} {} ::msgcat::mcset ca {Fixed size:} {} ::msgcat::mcset ca {Fixed some line incompatibilities} {Arreglades algunes incompatibilitats de línea} ::msgcat::mcset ca {FixedRelative EnterRelative} {FixarRelatiu EntrarRelatiu} ::msgcat::mcset ca {Fixing Min Max Contour:} {} ::msgcat::mcset ca Flags: {} ::msgcat::mcset ca Flat {} ::msgcat::mcset ca {Flat lighting} Basica ::msgcat::mcset ca Fonts {} ::msgcat::mcset ca {Foot text:} {} ::msgcat::mcset ca {for %d <-> %d intersecctions.} {} ::msgcat::mcset ca {for %d coefs on el %d.} {} ::msgcat::mcset ca {for %d dst pointers} {} ::msgcat::mcset ca {for %d dst points} {} ::msgcat::mcset ca {for %d graphs.} {} ::msgcat::mcset ca {for %d nodes on el %d.} {} ::msgcat::mcset ca {for %d pointers} {} ::msgcat::mcset ca {for %d points} {} ::msgcat::mcset ca {for %d selec graphs.} {} ::msgcat::mcset ca {for cuads.} {} ::msgcat::mcset ca {for cubes.} {} ::msgcat::mcset ca {for G_dg_resul_cortes.} {} ::msgcat::mcset ca {for G_dg_resul_cortes_v[ X].} {} ::msgcat::mcset ca {for G_dg_resul_cortes_v[ Y].} {} ::msgcat::mcset ca {for G_dg_resul_cortes_v[ Z].} {} ::msgcat::mcset ca {for G_elvc1[ X].} {} ::msgcat::mcset ca {for G_elvc1[ Y].} {} ::msgcat::mcset ca {for G_elvc1[ Z].} {} ::msgcat::mcset ca {for G_elvc2[ X].} {} ::msgcat::mcset ca {for G_elvc2[ Y].} {} ::msgcat::mcset ca {for G_elvc2[ Z].} {} ::msgcat::mcset ca {for G_elvc3[ X].} {} ::msgcat::mcset ca {for G_elvc3[ Y].} {} ::msgcat::mcset ca {for G_elvc3[ Z].} {} ::msgcat::mcset ca {for G_esp_resul_cortes.} {} ::msgcat::mcset ca {for G_iso_resul_cortes.} {} ::msgcat::mcset ca {for G_iso_resul_scale.} {} ::msgcat::mcset ca {for G_mx_resul_cortes.} {} ::msgcat::mcset ca {for G_puntos_ini.} {} ::msgcat::mcset ca {for G_resul_cortes.} {} ::msgcat::mcset ca {for G_resul_esp_cortes.} {} ::msgcat::mcset ca {for G_resul_suaves.} {} ::msgcat::mcset ca {for G_stvcm.} {} ::msgcat::mcset ca {for G_stvcx.} {} ::msgcat::mcset ca {for G_stvcy.} {} ::msgcat::mcset ca {for G_stvcz.} {} ::msgcat::mcset ca {for G_vc1[ X].} {} ::msgcat::mcset ca {for G_vc1[ Y].} {} ::msgcat::mcset ca {for G_vc1[ Z].} {} ::msgcat::mcset ca {for G_vc2[ X].} {} ::msgcat::mcset ca {for G_vc2[ Y].} {} ::msgcat::mcset ca {for G_vc2[ Z].} {} ::msgcat::mcset ca {for G_vc3[ X].} {} ::msgcat::mcset ca {for G_vc3[ Y].} {} ::msgcat::mcset ca {for G_vc3[ Z].} {} ::msgcat::mcset ca {for G_vcm.} {} ::msgcat::mcset ca {for G_vcsi.} {} ::msgcat::mcset ca {for G_vcsii.} {} ::msgcat::mcset ca {for G_vcsiii.} {} ::msgcat::mcset ca {for G_vcx.} {} ::msgcat::mcset ca {for G_vcy.} {} ::msgcat::mcset ca {for G_vcz.} {} ::msgcat::mcset ca {for G_vectores_ini.} {} ::msgcat::mcset ca {for L_resul_cortes.} {} ::msgcat::mcset ca {for line 1} {} ::msgcat::mcset ca {for line 1·2} {} ::msgcat::mcset ca {for line 1·2·3} {} ::msgcat::mcset ca {for line 2} {} ::msgcat::mcset ca {for line 2·2} {} ::msgcat::mcset ca {for line 3} {} ::msgcat::mcset ca {for line 3·2} {} ::msgcat::mcset ca {for lines.} {} ::msgcat::mcset ca {for mallas.} {} ::msgcat::mcset ca {for mesh selections.} {} ::msgcat::mcset ca {for meshes.} {} ::msgcat::mcset ca {for points.} {} ::msgcat::mcset ca {for set selections.} {} ::msgcat::mcset ca {for sets.} {} ::msgcat::mcset ca {for tetras.} {} ::msgcat::mcset ca {for triangle: %g} {} ::msgcat::mcset ca {for triangs.} {} ::msgcat::mcset ca Format {} ::msgcat::mcset ca {Format error in line} {} ::msgcat::mcset ca FORW {} ::msgcat::mcset ca {found %d.} {} ::msgcat::mcset ca {found 'End Values' before 'Values'.\n} {} ::msgcat::mcset ca {found an 'end values' too early \n} {} ::msgcat::mcset ca {Found an error} {} ::msgcat::mcset ca {found an error \n} {} ::msgcat::mcset ca {Found EOF too early} {} ::msgcat::mcset ca {Found EOF too early } {} ::msgcat::mcset ca {found EOF too early } {} ::msgcat::mcset ca {Found EOF too early \n} {} ::msgcat::mcset ca {found EOF too early \n} {} ::msgcat::mcset ca {Found error} {} ::msgcat::mcset ca {Four corners selection mode: Click on where the UPPER LEFT corner of the image should be.} {} ::msgcat::mcset ca {Frame Delay = %g -> Frames Per Step set to %d.} {} ::msgcat::mcset ca frames {} ::msgcat::mcset ca {Frames Per Step set to %d.} {} ::msgcat::mcset ca Freeze Congelar ::msgcat::mcset ca From {} ::msgcat::mcset ca {From now on, entities will be renumbered after deleting} {} ::msgcat::mcset ca {From now on, entities will NOT be renumbered after deleting} {} ::msgcat::mcset ca {FrontNode::GenerateNewFrontNode, bad index} {} ::msgcat::mcset ca {Gauss Point} {} ::msgcat::mcset ca {Gauss point definition not valid, } {} ::msgcat::mcset ca {Gauss point number %i. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {GAUSS POINTS} {} ::msgcat::mcset ca {Gauss points} {} ::msgcat::mcset ca {Gauss points '%s' not defined, } {} ::msgcat::mcset ca {Gauss points also for surface sets,} {} ::msgcat::mcset ca {gauss points on unkown element type} {} ::msgcat::mcset ca {gauss points when there are no meshes?} {} ::msgcat::mcset ca {gauss points when there are no sets?} {} ::msgcat::mcset ca {GaussPointsName must be between \\\", } {} ::msgcat::mcset ca General {} ::msgcat::mcset ca {General process} {} ::msgcat::mcset ca {Generating Discrete Surface elems...} {} ::msgcat::mcset ca {Generation failed} {} ::msgcat::mcset ca {Generic file name:} {} ::msgcat::mcset ca {Generic format} {} ::msgcat::mcset ca Geom_Get_Cut_Set_Info: {} ::msgcat::mcset ca Geom_Get_Cut_Set_Info_Names: {} ::msgcat::mcset ca Geom_Get_Set_Info_Names: {} ::msgcat::mcset ca Geom_Get_Surface_Set_Info: {} ::msgcat::mcset ca Geom_Get_Surface_Set_Info_Names: {} ::msgcat::mcset ca Geom_Get_Volume_Set_Info: {} ::msgcat::mcset ca Geom_Get_Volume_Set_Info_Names: {} ::msgcat::mcset ca {Geometry conditions are shown.} {} ::msgcat::mcset ca {Geometry has} {} ::msgcat::mcset ca {Geometry inserted} {Geometria insertada} ::msgcat::mcset ca {GEOMETRY record not processed} {} ::msgcat::mcset ca {Geometry renumbered. You can redraw} {Geometria renumerada. Es pot redibuixar} ::msgcat::mcset ca {Geometry Repaired. Repeared %d items. Improved %d items} {} ::msgcat::mcset ca {Get angle} {} ::msgcat::mcset ca {Get distance} {} ::msgcat::mcset ca {Get it from:} {} ::msgcat::mcset ca {Get point} {} ::msgcat::mcset ca {Get vector} {} ::msgcat::mcset ca get_set_textura {} ::msgcat::mcset ca {Getting isosurface} {} ::msgcat::mcset ca {Getting normal from element %i} {} ::msgcat::mcset ca {Getting normal from surface %i} {} ::msgcat::mcset ca {Getting point from element %i} {} ::msgcat::mcset ca {Getting point from surface %i} {} ::msgcat::mcset ca {Getting results} {} ::msgcat::mcset ca {Getting surrounding mesh} {} ::msgcat::mcset ca GID {} ::msgcat::mcset ca {GiD doesn't support} {} ::msgcat::mcset ca {GiD Help} {} ::msgcat::mcset ca {GiD Info} {} ::msgcat::mcset ca {GiD logo included on hardcopies and prints.} {} ::msgcat::mcset ca {GiD logo not included on hardcopies and prints.} {} ::msgcat::mcset ca {GiD mesh read} {} ::msgcat::mcset ca {GiD mesh write} {} ::msgcat::mcset ca {GiD only supports} {} ::msgcat::mcset ca {GiD Reference} {} ::msgcat::mcset ca {GID report} {} ::msgcat::mcset ca {GID report help} {} ::msgcat::mcset ca {GiD tutorials} {} ::msgcat::mcset ca {GiD_AccessValue get %s: extra arguments} {} ::msgcat::mcset ca {GiD_AccessValue get %s: extra last argument} {} ::msgcat::mcset ca {GiD_AccessValue get %s: missing property name} {} ::msgcat::mcset ca {GiD_AccessValue set %s: extra last argument %s} {} ::msgcat::mcset ca {GiD_AccessValue set %s: missing last argument (newvalue)} {} ::msgcat::mcset ca {GiD_AccessValue: attribute %s is read only in %s %s for property %s} {} ::msgcat::mcset ca {GiD_AccessValue: attribute %s not found in %s %s for property %s} {} ::msgcat::mcset ca {GiD_AccessValue: property %s not found in %s %s} {} ::msgcat::mcset ca {GiD_AccessValue: there are not intervals} {} ::msgcat::mcset ca {GiD_AccessValue: unknown %s %s} {} ::msgcat::mcset ca {GiD_AssignData material|condition name over ?newValues? entities} {} ::msgcat::mcset ca {GiD_AssignData: a condition cannot be over %s} {} ::msgcat::mcset ca {GiD_AssignData: a material cannot be over %s} {} ::msgcat::mcset ca {GiD_AssignData: bad condition name '%s'} {} ::msgcat::mcset ca {GiD_AssignData: bad entities selection to assign condition '%s'} {} ::msgcat::mcset ca {GiD_AssignData: bad entities selection to assign material '%s'} {} ::msgcat::mcset ca {GiD_AssignData: bad material name '%s'} {} ::msgcat::mcset ca {GiD_AssignData: condition must be over type %d, not over %s} {} ::msgcat::mcset ca {GiD_CreateData create|delete material ?basename? name ?values?} {} ::msgcat::mcset ca {GiD_CreateData: base material %s not exists} {} ::msgcat::mcset ca {GiD_CreateData: material %s already exists} {} ::msgcat::mcset ca {GiD_CreateData: material %s not created: incorrect number of values} {} ::msgcat::mcset ca {GiD_CreateData: material %s to delete not exists} {} ::msgcat::mcset ca {GiD_IntervalData create|delete|set |?copyconditions?} {} ::msgcat::mcset ca {GiD_IntervalData delete } {} ::msgcat::mcset ca {GiD_IntervalData set } {} ::msgcat::mcset ca {GiD_LocalAxes create|delete|edit|exists ?rectangular|cylindrical|spherical ?} {} ::msgcat::mcset ca {GiD_LocalAxes: axes '%s' already exists} {} ::msgcat::mcset ca {GiD_LocalAxes: axes '%s' not exists} {} ::msgcat::mcset ca {GiD_LocalAxes: cylindrical axes not implemented now in GiD} {} ::msgcat::mcset ca {GiD_LocalAxes: mode must be create, delete, edit or exists} {} ::msgcat::mcset ca {GiD_LocalAxes: Points not correct} {} ::msgcat::mcset ca {GiD_LocalAxes: spherical axes not implemented now in GiD} {} ::msgcat::mcset ca {GiD_LocalAxes: type must be rectangular, cylindrical or spherical} {} ::msgcat::mcset ca {GiD_ModifyData: interval number %d out of range} {} ::msgcat::mcset ca {GiD_ModifyData: invalid data & couldn't modify} {} ::msgcat::mcset ca {GiD_ModifyData: invalid interval reference '%s', must be an integer} {} ::msgcat::mcset ca {GiD_ModifyData: missing arguments, must be: GiD_ModifyData %s %s } {} ::msgcat::mcset ca {GiD_ModifyData: missing arguments, must be: GiD_ModifyData ((materials|intvdata) |gendata) } {} ::msgcat::mcset ca {GiD_ModifyData: there are not intervals} {} ::msgcat::mcset ca {GiD_ModifyData: unknown %s %s} {} ::msgcat::mcset ca {Gif file '%s' created.} {} ::msgcat::mcset ca {Gif file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {GIF hardcopy} {} ::msgcat::mcset ca {GIF write} {} ::msgcat::mcset ca {Give image point in surf %i of point %i. Posibilities: } {Dongui el punt imatge a la superfície %i del punt %i. Possibilitats: } ::msgcat::mcset ca {Given Gauss Points are not supported for lines, changing to calculated ones.} {} ::msgcat::mcset ca {Given Gauss Points are still not supported, changing to calculated ones.} {} ::msgcat::mcset ca {glGIDClearIndex: bad color index= %d.} {} ::msgcat::mcset ca {glGIDGetColor: bad color index= %d.} {} ::msgcat::mcset ca {glGIDIndex: bad color index= %d.} {} ::msgcat::mcset ca {glGIDSetColor: bad color index= %d.} {} ::msgcat::mcset ca Go {} ::msgcat::mcset ca {Go up to parent directory} {} ::msgcat::mcset ca {Graf %d's line pattern changed to %x.} {} ::msgcat::mcset ca {Graf %d's linewidth changed to %g pixels.} {} ::msgcat::mcset ca {Graf %d's pattern factor changed to %d.} {} ::msgcat::mcset ca {Graf %d's point size changed to %g pixels.} {} ::msgcat::mcset ca {Graf color left unchanged} {} ::msgcat::mcset ca {Graph line} {} ::msgcat::mcset ca {graph type} {} ::msgcat::mcset ca {Graph_%d written into file '%s'.} {} ::msgcat::mcset ca {Graph_%d: %d points read from file '%s'.} {} ::msgcat::mcset ca {Graphic objects} {} ::msgcat::mcset ca Graphical Grafic ::msgcat::mcset ca Graphs {} ::msgcat::mcset ca Graphs: {} ::msgcat::mcset ca {Gravity center=%lg %lg %lg} {} ::msgcat::mcset ca Green {} ::msgcat::mcset ca Grids {} ::msgcat::mcset ca Group {} ::msgcat::mcset ca {Hard problems with Batch File To Write. Quit fast} {Problemes terribles amb el fitxer de comandes que s'escriu. Surti inmediatament} ::msgcat::mcset ca {Hardcopy file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {Height Margin changed to %g inches.} {} ::msgcat::mcset ca {Height must not be zero} {} ::msgcat::mcset ca {hello world} {} ::msgcat::mcset ca {hello world\n} {} ::msgcat::mcset ca HELP {} ::msgcat::mcset ca Help Ajuda ::msgcat::mcset ca help {} ::msgcat::mcset ca {Help search} {} ::msgcat::mcset ca {Here are output the process messages. At the same time, it is possible to enter written commands or point coordinates or entities labels. Use to expand commands.} {} ::msgcat::mcset ca Hexahedra Hexahedre ::msgcat::mcset ca {Hidden Lines} {} ::msgcat::mcset ca {Hidding Axes.} {} ::msgcat::mcset ca {Hidding Legends.} {} ::msgcat::mcset ca Hide {} ::msgcat::mcset ca {Hide file} {} ::msgcat::mcset ca {Hide Info.} {} ::msgcat::mcset ca HighAngle {} ::msgcat::mcset ca {Higher entities} {} ::msgcat::mcset ca HigherEnt {} ::msgcat::mcset ca HigherEnt: {} ::msgcat::mcset ca HighGeom {} ::msgcat::mcset ca {How do you want to see the vectors ( %s) ?} {} ::msgcat::mcset ca {How long the delay per frame (seconds)?} {} ::msgcat::mcset ca {How many Colours Keys do you want ? [ %d - %d]} {} ::msgcat::mcset ca {How many cut planes should I read?} {} ::msgcat::mcset ca {How many cut surfaces along this axis?} {} ::msgcat::mcset ca {How many cuts?} {} ::msgcat::mcset ca {How many frames per step?} {} ::msgcat::mcset ca {How many iso-surfaces do you want ? \n Results interval: [ Min: %g - Max: %g]} {} ::msgcat::mcset ca {How many points ( width,height) do you want inside the quad?} {} ::msgcat::mcset ca {How many points do you want along the line?} {} ::msgcat::mcset ca {HSB color space} {} ::msgcat::mcset ca HSV {} ::msgcat::mcset ca {I don't find} {} ::msgcat::mcset ca {I don't know how to divide a cube with only %d edges cut.} {} ::msgcat::mcset ca {I don't know what kind ( %d) of mesh is this %d.} {} ::msgcat::mcset ca {I don't know what to do with those Prismas.} {} ::msgcat::mcset ca {I will draw the vectors with one colour.} {} ::msgcat::mcset ca {I will draw the vectors with several colours.} {} ::msgcat::mcset ca {I will fix the limits for ALL SETS to draw the contour results for this Step.} {} ::msgcat::mcset ca {I will fix the limits for the SHOWN SETS to draw the contour results for this Step} {} ::msgcat::mcset ca {I will use BLACK for the results lower then the Minimum limit.} {} ::msgcat::mcset ca {I will use BLACK for the results upper then the Maximum limit.} {} ::msgcat::mcset ca {I will use the } {} ::msgcat::mcset ca {I will use the MATERIAL for the results lower then the Minimum limit.} {} ::msgcat::mcset ca {I will use the MATERIAL for the results upper then the Maximum limit.} {} ::msgcat::mcset ca {I will use the MAX COLOUR for the results upper then the Maximum limit.} {} ::msgcat::mcset ca {I will use the MIN COLOUR for the results lower then the Minimum limit.} {} ::msgcat::mcset ca {I will use the TRANSPARENT for the results lower then the Minimum limit.} {} ::msgcat::mcset ca {I will use the TRANSPARENT for the results upper then the Maximum limit.} {} ::msgcat::mcset ca {Id %d - this is not a result visualization state} {} ::msgcat::mcset ca Identifying {} ::msgcat::mcset ca {If 'inside' is selected and the toolbar can adopt different positions inside the main window, these buttons choose if the window is up, left, right or bottom of the main window.} {} ::msgcat::mcset ca {If automatic, after a download the results are automatically deleted from the server.} {} ::msgcat::mcset ca {If automatic, when the analysis is finished, the results are automatically downloaded.} {} ::msgcat::mcset ca {If batch file is on, one file name must be given} {} ::msgcat::mcset ca {If divide surfaces, lines will be divided} {} ::msgcat::mcset ca {If label on surface: label v,u means: v<=NumPointsV and u<=NumPointsU} {} ::msgcat::mcset ca {If not set, when rotating the geometry, some graphical and temporal objects like normals or materials or conditions symbols are not drawn. } {} ::msgcat::mcset ca {If path line is a polyline, angle parameter has no effect.} {} ::msgcat::mcset ca {If remote update is set, program will contact automatically with the sever one time every given seconds, to check if process has finished and also to get status information} {} ::msgcat::mcset ca {If set and when rendering a mesh, the intersection between elements with a small angle between their normals will be illuminated as if it were a continuous solid. If not, illumination is made considering every element as planar. \nThe angle (in degrees) is the maximum angle between normals of two elements to allow smooth lighting between them. If not, one edge is drawn between them.} {} ::msgcat::mcset ca {if set to 'Ignoring Layers' entities are collapsed also if they belong to different layers. If set to 'Each layer separately' entities in different layers are not collapsed. (Entities belonging to frozen layers are never considered).} {} ::msgcat::mcset ca {If set, coordinates are shown in the graphical window. } {} ::msgcat::mcset ca {If set, file names are required from the user with a browser window. If not, file names are required in the command line} {} ::msgcat::mcset ca {If set, when viewing the mesh and rotating, the geometry is drawn instead.} {} ::msgcat::mcset ca {If this option is set, a 'view' menu entry will appear on the top menu bar view several view options.} {} ::msgcat::mcset ca {If this option is set, a sound is played to indicate a task has finished.} {} ::msgcat::mcset ca {If this option is set, after reading one IGES, DXF, VDA, Parasolid or ACIS file, one global collapse is made.} {} ::msgcat::mcset ca {If this option is set, and a filename is given, all commands used during the current session are saved into this file. It can be executed later by means of a script file with the predefined commands to be run in the program (see 'Batch file'). \nWith option 'Write rotations in batch' all dynamic rotations and movements are stored in the batch file. This permits to see these movements when reading this batch file with 'Read batch window'.} {} ::msgcat::mcset ca {If this option is set, entities with 'invisible' flag in an IGES file are ignored. If it is not set, all these entities are sent to a layer with name: 'Invisible'.} {} ::msgcat::mcset ca {If this option is set, the IGES curve on surface entities, are created from the direct 3D space definition (recommended), else are created from the surface space parameter definition.} {} ::msgcat::mcset ca {If this option is set, the model is saved automatically with the frequency given by the number of minutes \n'Note:' Mesh is not saved into the backup to save time.} {} ::msgcat::mcset ca {If this option is set, the value of Import tolerance is assigned automatically according to the size of the model.} {} ::msgcat::mcset ca {If this option is set, the welcome image is displayed when opening the program} {} ::msgcat::mcset ca {If this option is set, when selecting some windows are resized in order to facilitate the selection.} {} ::msgcat::mcset ca {If this preference is set, functions like 'Assign sizes by Cordal Error' will define some surfaces as structured with highly distorted elements over them.} {} ::msgcat::mcset ca {If this preference is set, just when meshing begins, there is a correction to the meshing sizes assigned to entities so as to improve meshing.} {} ::msgcat::mcset ca {If this preference is set, no mesh will be generated over entities that belong to frozen layers. } {} ::msgcat::mcset ca {If this preference is set, the mesh generator will continue until end although there are surfaces or volumes that cannot be meshed.} {} ::msgcat::mcset ca {IGES file '%s' written OK. Leaving} {} ::msgcat::mcset ca {IGES File Read} {} ::msgcat::mcset ca {IGES read} {Llegir IGES} ::msgcat::mcset ca {IGES Read Time=%d seconds} {} ::msgcat::mcset ca {IGES write} {} ::msgcat::mcset ca {IGES: Curve on surface from 3D} {} ::msgcat::mcset ca {IGES: ignore invisible entities} {} ::msgcat::mcset ca {IGESIn. Warning, possible bad section count lines} {} ::msgcat::mcset ca Ignore {} ::msgcat::mcset ca {Ignoring layers} {} ::msgcat::mcset ca {Image copied to Clipboard OK.} {} ::msgcat::mcset ca {Image created} {} ::msgcat::mcset ca {Image Height changed to %g inches.} {} ::msgcat::mcset ca {Image printed OK. Leaving} {} ::msgcat::mcset ca {Image Resolution changed to %d dpi.} {} ::msgcat::mcset ca {Image Width changed to %g inches.} {} ::msgcat::mcset ca {Image will be auto cropped on hardcopies and prints.} {} ::msgcat::mcset ca {Image will remain as is on hardcopies and prints, no autocropping will be done.} {} ::msgcat::mcset ca Import {} ::msgcat::mcset ca {Import macros from file.} {} ::msgcat::mcset ca {Import previusly exported tables} {} ::msgcat::mcset ca {Import results table} {} ::msgcat::mcset ca {Import tolerance:} {} ::msgcat::mcset ca Import/Export Importar/exportar ::msgcat::mcset ca {Import/Export materials} {} ::msgcat::mcset ca {Improve mesh results:} {} ::msgcat::mcset ca {Improving mesh} {} ::msgcat::mcset ca {Improving mesh...} {} ::msgcat::mcset ca {In %1\$s, processing magnitude %2\$s: %3\$s is already defined as %4\$s} {} ::msgcat::mcset ca {in field:} {} ::msgcat::mcset ca {In line: %i desired size=%f} {} ::msgcat::mcset ca {In order to perform a calculation, a problemtype must be loaded. Use Data->Problemtypes.} {} ::msgcat::mcset ca {In screen} {} ::msgcat::mcset ca {In surface: %i desired size=%f} {} ::msgcat::mcset ca {in this line:} {} ::msgcat::mcset ca {in this MESH header.} {} ::msgcat::mcset ca {Include local axes} {} ::msgcat::mcset ca {Include project summary} {} ::msgcat::mcset ca {include: file '%s' already included } {} ::msgcat::mcset ca {include: syntax error, } {} ::msgcat::mcset ca {include: too many includes ( max: %d) } {} ::msgcat::mcset ca {Including '%s' results file} {} ::msgcat::mcset ca {Incompatible dimensions for multiply\n\tMatriu 1 : nrows=%d, ncols=%d\n\tMatriu 2 : nrows=%d, ncols=%d\n} {} ::msgcat::mcset ca {Incorrect condition name in symbols file: '%s'} {} ::msgcat::mcset ca {incorrect element number, should be >= 1} {} ::msgcat::mcset ca {incorrect factor %s} {} ::msgcat::mcset ca {Incorrect format} {} ::msgcat::mcset ca {incorrect node number, should be >= 1} {} ::msgcat::mcset ca {incorrect set number, should be >= 0 and < 1e8} {} ::msgcat::mcset ca {Increase bound} {} ::msgcat::mcset ca index {} ::msgcat::mcset ca {Index %d too big %d} {} ::msgcat::mcset ca {Index out of range in ReaVec. Length=%d index=%d} {} ::msgcat::mcset ca {Index out of range in ReaVecV. Length=%d index=%d} {} ::msgcat::mcset ca {Index r=%d, c=%d out of range. Matriu size: nr=%d, nc=%d} {} ::msgcat::mcset ca {Infinite loop} {} ::msgcat::mcset ca {Influence factor} {} ::msgcat::mcset ca Info Informacio ::msgcat::mcset ca {Info files unchanged, avoid to send} {} ::msgcat::mcset ca {Information from server %s} {} ::msgcat::mcset ca {Information from server: %s} {} ::msgcat::mcset ca {information window} {} ::msgcat::mcset ca {Initializing . . .} {} ::msgcat::mcset ca {Input file name:} {} ::msgcat::mcset ca {Input Scale Factor ( %g) ?} {} ::msgcat::mcset ca {Input Scale factor:} {} ::msgcat::mcset ca {Insert (deletes) a marker to show that the line will be interpreted as TCL} {} ::msgcat::mcset ca {Insert current view} {} ::msgcat::mcset ca {Insert knot} {} ::msgcat::mcset ca {Insert paragraph} {} ::msgcat::mcset ca {Insert Project} {Insertar projecte} ::msgcat::mcset ca {Insert text paragraph} {} ::msgcat::mcset ca {Insert U knot} {} ::msgcat::mcset ca {Insert V knot} {} ::msgcat::mcset ca {Insert view} {} ::msgcat::mcset ca {Inserts a 'escape' code} {} ::msgcat::mcset ca {Inserts a set of 'escape' codes (4)} {} ::msgcat::mcset ca Inside {A dins} ::msgcat::mcset ca {Inside the directory '%s' a directory named '%s' will be created to store images.} {} ::msgcat::mcset ca {interface killed} {} ::msgcat::mcset ca {Interior of Bodies are drawn.} {} ::msgcat::mcset ca {Interior of Bodies are not drawn.} {} ::msgcat::mcset ca {Interior/All vectors} {} ::msgcat::mcset ca {internal error} {} ::msgcat::mcset ca {Internal error when calculating intersection.} {} ::msgcat::mcset ca {Internal error. Problems creating surfaces} {Error intern. Problemes creant superfícies} ::msgcat::mcset ca {Internal error: bad mode option.} {} ::msgcat::mcset ca {Internal error: bad Precision option.} {} ::msgcat::mcset ca {Internal error: bad precision option.} {} ::msgcat::mcset ca {Internal error: bad rotating option.} {} ::msgcat::mcset ca {Internal error: bad type of entity to be extruded.} {} ::msgcat::mcset ca {Internal error: bad type of entity.} {} ::msgcat::mcset ca {Internal error: can't store new copied figures.} {} ::msgcat::mcset ca {Internal error: can't store new extruded figures.} {} ::msgcat::mcset ca {Internal error: cannot create interpolated nurbline.} {} ::msgcat::mcset ca {Internal error: no figures to be copied.} {} ::msgcat::mcset ca {Internal error: no figures to be extruded.} {} ::msgcat::mcset ca {Internal error: no path line entered.} {} ::msgcat::mcset ca {Internal error; unknown state: %s} {} ::msgcat::mcset ca {Internal limit overflow in ProcessCb. Information is lost} {} ::msgcat::mcset ca {Internal materials} {} ::msgcat::mcset ca {Internal stop} {} ::msgcat::mcset ca {Intersecting 2D surfaces} {} ::msgcat::mcset ca {Intersecting surfaces} {} ::msgcat::mcset ca {Intersecting volumes} {} ::msgcat::mcset ca intersection {} ::msgcat::mcset ca {Intersection point not valid. It is very close to one line end. Try again} {} ::msgcat::mcset ca {Intersection point not valid. It is very close to one surface end. Try again} {} ::msgcat::mcset ca Interval Interval ::msgcat::mcset ca {Interval Data} {} ::msgcat::mcset ca {Interval width too little: %g -> %d divisions. Using default.} {} ::msgcat::mcset ca {Intervals: } {} ::msgcat::mcset ca {IntPlex::Add. Invalid Int index(5) %d} {} ::msgcat::mcset ca {IntPlex::add_at. Invalid Int index(1) %d} {} ::msgcat::mcset ca {IntPlex::cache. Invalid Int index(2) %d} {} ::msgcat::mcset ca {IntPlex::set_at. Invalid Int index(1) %d} {} ::msgcat::mcset ca {Invalid header, verify if it is a valid Shapefile ...Leaving} {} ::msgcat::mcset ca {Invalid magnitud name or units list ill-formed} {} ::msgcat::mcset ca {Invalid new %1\$s name: %2\$s already exists in data base.\nTo override it use Modify} {} ::msgcat::mcset ca {Invalid number of fields. Try again (ESC to leave)} {} ::msgcat::mcset ca {Invalid temperature symbol %1\$s. Should be Cel, Kel, or Far} {} ::msgcat::mcset ca {Inverse Standard} {} ::msgcat::mcset ca Invisible {} ::msgcat::mcset ca InvStandard {} ::msgcat::mcset ca {Iso Superficies:} {} ::msgcat::mcset ca {Iso Surfaces} {} ::msgcat::mcset ca {Iso Surfaces:} {} ::msgcat::mcset ca Isoparam. {} ::msgcat::mcset ca {Isoparametric lines} {} ::msgcat::mcset ca {isprbquestion: invalid argument '%s', must be 0 or 1} {} ::msgcat::mcset ca {It alters the way how the points are entered. Options are: \nAlways: If trying to create a new point in the vicinity of an existing one, the new point is always created. \nAsk: If trying to create a new point in the vicinity of an existing one, the program asks the user whether to make use of the existing point or create a new one. \nNever: Only allows to select existing points. It can be changed interactively when in creation point mode by setting 'No join' until all points are entered.} {} ::msgcat::mcset ca {It changes the customized render name} {} ::msgcat::mcset ca {It consists on several intersecting surfaces.} {} ::msgcat::mcset ca {It controls whether the transitions between different element sizes are slow or fast.} {} ::msgcat::mcset ca {It creates a new macro with the current name or modifies current macro} {} ::msgcat::mcset ca {It is necessary to enter a group name} {} ::msgcat::mcset ca {It is necessary to enter a server name} {} ::msgcat::mcset ca {It is necessary to enter a user name} {} ::msgcat::mcset ca {It is not possible to draw all conditions by color. Try again} {} ::msgcat::mcset ca {It is not possible to draw one condition by color and with local axes. Try again} {} ::msgcat::mcset ca {It is the angle variation of the figure between start and final point of path curve.} {} ::msgcat::mcset ca {It set the current customized render mode} {} ::msgcat::mcset ca {It set the program language. The new settings will be active after restarting.} {} ::msgcat::mcset ca {It's a closed surface.} {} ::msgcat::mcset ca {It's an open surface.} {} ::msgcat::mcset ca JOIN {} ::msgcat::mcset ca {Join meshes} {} ::msgcat::mcset ca {Join sets} {} ::msgcat::mcset ca {Joining original points} {} ::msgcat::mcset ca {Joining points} {} ::msgcat::mcset ca {Joining to existant point} {Agafant un punt existent} ::msgcat::mcset ca {Joining to existant point in Graph Lines, till not supported.} {} ::msgcat::mcset ca {Jpeg file '%s' created.} {} ::msgcat::mcset ca {Jpeg file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {Jpeg hardcopy} {} ::msgcat::mcset ca {JPEG write} {} ::msgcat::mcset ca {Just click which edge the wire should be tied to.} {} ::msgcat::mcset ca {just writing . . .} {} ::msgcat::mcset ca {Key colors:} {} ::msgcat::mcset ca {Keyboard Shortcut:} {} ::msgcat::mcset ca Kill {} ::msgcat::mcset ca {Kill locally} {} ::msgcat::mcset ca {Kill them?} {} ::msgcat::mcset ca {Killed process:%s} {} ::msgcat::mcset ca {Killing process in server is not possible.} {} ::msgcat::mcset ca {Knots cancelled. They cannot by used in interpolated curves} {} ::msgcat::mcset ca {Knots list cancelled. Any knot k must be: 0.0<=k<=1.0 and k(i)>=k(i-1)} {} ::msgcat::mcset ca {Knots list cancelled. NK < NumPoints+degree+1} {} ::msgcat::mcset ca {Knots list cancelled. NK > NumPoints+degree+1} {} ::msgcat::mcset ca {Label must be positive. Try again} {Etiqueta ha de ser positiva. Intenti-ho de nou} ::msgcat::mcset ca {Labels / Dimensions Font} {} ::msgcat::mcset ca Landscape {} ::msgcat::mcset ca Language {} ::msgcat::mcset ca {last line doesn't exist. You can continue (ESC to end)} {Última línea no existeix. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Last line read [%s]} {} ::msgcat::mcset ca {Last point is cancelled. Continue with tangents} {Últim punt cancel.lat. Continui amb les tangents} ::msgcat::mcset ca {Last transformation deleted.} {} ::msgcat::mcset ca Layer Capa ::msgcat::mcset ca layer {} ::msgcat::mcset ca {Layer %s already exists} {} ::msgcat::mcset ca {Layer %s has been erased} {} ::msgcat::mcset ca {Layer %s is frozen} {Capa %s està congelada} ::msgcat::mcset ca {Layer %s is OFF} {Capa %s està desconnectada} ::msgcat::mcset ca {Layer %s is ON} {Capa %s està connectada} ::msgcat::mcset ca {Layer %s is unfrozen} {Capa %s està descongelada} ::msgcat::mcset ca {Layer '%s' already exists} {} ::msgcat::mcset ca {Layer '%s' can't be erased.\n(see the message bar for details)} {} ::msgcat::mcset ca {Layer '%s' doesn't exist. Try again (ESC to leave)} {Capa '%s'no existeix. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Layer in use is '%s'} {} ::msgcat::mcset ca {Layer name '%s' exists. Try again} {Capa '%s'existeix. Intenti-ho de nou} ::msgcat::mcset ca {Layer name cannot contain string _*back*. Try again} {} ::msgcat::mcset ca {Layer not exist} {} ::msgcat::mcset ca {Layer To use} {Capa en ús} ::msgcat::mcset ca {Layer to use is NULL. Nothing changed} {} ::msgcat::mcset ca {Layer to use: %s} {Capa en ús: %s} ::msgcat::mcset ca {layer: '%s' doesn't exist. Try again} {capa: '%s'no existeix. Intenti-ho de nou} ::msgcat::mcset ca {Layer: '%s' doesn't exist. You can create this} {Capa: '%s' no existeix.} ::msgcat::mcset ca layers {} ::msgcat::mcset ca Leaving Sortint ::msgcat::mcset ca {Leaving 2D surface %s} {} ::msgcat::mcset ca {Leaving add hole to NurbSurface. No changes} {} ::msgcat::mcset ca {Leaving arc creation. %i new arcs, %i new points} {Sortint de creació de arc. %i arcs nous, %i punts nous} ::msgcat::mcset ca {Leaving arc creation. 0 new arcs, 0 new points} {Sortint de creació d'arc. 0 arcs nous, 0 punts nousLeaving arc creation.} ::msgcat::mcset ca {Leaving assign structured sizes} {Sortint de la funció assignar tamanys estructurats} ::msgcat::mcset ca {Leaving blend surfaces function. No changes} {} ::msgcat::mcset ca {Leaving change layers} {Sortint de la funció de capes} ::msgcat::mcset ca {Leaving change variables} {} ::msgcat::mcset ca {Leaving contact creation} {Leaving contact creation.} ::msgcat::mcset ca {Leaving contact creation. No changes} {Leaving contact creation. No changes} ::msgcat::mcset ca {Leaving convert to NURBS lines function. No changes} {Sortint de la funció de convertir a línees NURBS. Cap canvi} ::msgcat::mcset ca {Leaving convert to NURBS surfaces function. No changes} {Sortint de la funció de conversió a superfícies NURBS. Cap canvi} ::msgcat::mcset ca {Leaving convert to simplified NURBS lines function. No changes} {} ::msgcat::mcset ca {Leaving convert to simplified NURBS surfaces function. No changes} {} ::msgcat::mcset ca {Leaving create boundary mesh. No changes} {} ::msgcat::mcset ca {Leaving creation of new %s.} {} ::msgcat::mcset ca {Leaving creation of new derived materials. No new materials} {} ::msgcat::mcset ca {Leaving creation of new Materials. No new Materials} {} ::msgcat::mcset ca {Leaving debug function} {} ::msgcat::mcset ca {Leaving delete local axes. No changes} {Sortint de la funció de borrar eixos locals. Cap canvi} ::msgcat::mcset ca {Leaving drawing conditions function} {Sortint de la funció de dibuixar condicions} ::msgcat::mcset ca {Leaving drawing local axes function} {Sortint de la funció de dibuixar eixos locals} ::msgcat::mcset ca {Leaving drawing materials function} {Sortint de la funció de dibuixar materials} ::msgcat::mcset ca {Leaving drawing normals function} {Sortint de la funció de dibuixar normals} ::msgcat::mcset ca {Leaving drawing.} {} ::msgcat::mcset ca {Leaving edit mesh} {} ::msgcat::mcset ca {Leaving edit Polyline function. No changes} {Sortint de funció de editar polilínees. Cap canvi} ::msgcat::mcset ca {Leaving edit SurfMeshes function. No changes} {Sortint de la funció de edició de superfícies-malla. Cap canvi} ::msgcat::mcset ca {Leaving explode function. No changes} {Sortint de funció explotar. Cap canvi} ::msgcat::mcset ca {Leaving function copy. No changes} {} ::msgcat::mcset ca {Leaving function uncollapse. No changes} {} ::msgcat::mcset ca {Leaving function. No changes} {Sortint de la funció. Cap canvi} ::msgcat::mcset ca {Leaving generation} {} ::msgcat::mcset ca {Leaving intersect lines function. No changes} {} ::msgcat::mcset ca {Leaving line creation. %i new lines, %i new points} {Sortint de creació de línea. %i línees noves, %i punts nous} ::msgcat::mcset ca {Leaving list entities. Nothing listed} {} ::msgcat::mcset ca {Leaving local axes definition} {Sortint de la funció de creació d'eixos locals} ::msgcat::mcset ca {Leaving make new window func. No changes.} {} ::msgcat::mcset ca {Leaving mesh from boundary.} {} ::msgcat::mcset ca {Leaving mesh reading} {} ::msgcat::mcset ca {Leaving NurbSurface creation. No changes} {Sortint de la funció de creació de superfícies NURBS. Cap canvi} ::msgcat::mcset ca {Leaving NurbSurface intersection.} {} ::msgcat::mcset ca {Leaving planar surface generation} {} ::msgcat::mcset ca {Leaving polyLine creation} {} ::msgcat::mcset ca {Leaving Problem type function. No changes} {} ::msgcat::mcset ca {Leaving problem type function. No problem type} {} ::msgcat::mcset ca {Leaving project nodes. Nothing selected} {} ::msgcat::mcset ca {Leaving rename material.} {} ::msgcat::mcset ca {Leaving screen objects move.} {} ::msgcat::mcset ca {Leaving selecting elements. No surfmesh created.} {} ::msgcat::mcset ca {Leaving Shapefile reading} {} ::msgcat::mcset ca {Leaving smooth elements. Nothing selected} {} ::msgcat::mcset ca {Leaving split NurbSurface. No changes} {} ::msgcat::mcset ca {Leaving surface-line intersection. No changes} {} ::msgcat::mcset ca {Leaving Surfaces intersection.} {} ::msgcat::mcset ca {Leaving swap arcs function. No changes} {Sortint de la funció de inversió de arcs. Cap canvi} ::msgcat::mcset ca {Leaving trimmed NurbSurface creation. No changes} {} ::msgcat::mcset ca {Leaving Unassign material to entities.} {} ::msgcat::mcset ca {Leaving volume %s} {} ::msgcat::mcset ca {Leaving volume generation (no volume created)} {} ::msgcat::mcset ca {Leaving with no changes} {} ::msgcat::mcset ca {Leaving with redraw} {} ::msgcat::mcset ca {Leaving zoom function} {} ::msgcat::mcset ca Leaving. {} ::msgcat::mcset ca {Leaving. No changes} {Sortint. No hi ha canvis} ::msgcat::mcset ca {Leaving. Redraw due to changes} {} ::msgcat::mcset ca Left: {} ::msgcat::mcset ca Legend {} ::msgcat::mcset ca {Legend format:} {} ::msgcat::mcset ca Legends {} ::msgcat::mcset ca Length {} ::msgcat::mcset ca {length of words must be less than 15. Try again (ESC to leave)} {Longitut de les paraules ha de ser menor que 15. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca Length: {} ::msgcat::mcset ca Less {} ::msgcat::mcset ca {Lets the user choose how to draw the surfaces when in wireframe (normal) mode. Options are: \n'None': Surfaces are not drawn. \n'Boundary lines': One magenta line is drawn for every contour line. This set of lines have a small offset towards the interior of the surface. \n'Isoparametric lines': Two yellow lines are drawn for every NURBS surface. The one for 'u=0.5' and the one for 'v=0.5'. \n'Both': Draws both modes.} {} ::msgcat::mcset ca {lies outside the sets} {} ::msgcat::mcset ca {Light Vector changed to ( %g, %g, %g)} {} ::msgcat::mcset ca {Light Vector changed to ( %g, %g, %g, %g)} {} ::msgcat::mcset ca {Light Vector changed to default vector ( %g, %g, %g)} {} ::msgcat::mcset ca Lighting {} ::msgcat::mcset ca {Limit set to the result ones.} {} ::msgcat::mcset ca {Limit set to: Min = %g, Max = %g.} {} ::msgcat::mcset ca line linea ::msgcat::mcset ca {Line %d not exists. Try again} {} ::msgcat::mcset ca {line %i can't be joined as second.It has higher level entities. Can continue} {línea %i no pot ser ajuntada com a segona. Té entititats d'ordre superior. Pot continuar} ::msgcat::mcset ca {line %i can't be used. It has higher level entities.} {línea %i no pot ser usada. Té entitats d'ordre superior.} ::msgcat::mcset ca {Line %i doesn't exist. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {line %i doesn't exist. Continue selecting (ESC to leave)} {Línea %i no existeix. Continui seleccionant (ESC per acabar)} ::msgcat::mcset ca {line %i is a polyline. Use method 'polyline' to divide it Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Line %i is between both points. Delete it?} {Línea %i està entre ambdòs punts. L'esborro?} ::msgcat::mcset ca {line %i is not a polyline. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Line %i not contained in any selected SurfMesh.} {} ::msgcat::mcset ca {line %i start point=%i, end point=%i} {línea %i punt d'inici=%i, punt final=%i} ::msgcat::mcset ca {Line Diagram} {} ::msgcat::mcset ca {Line Diagram '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Line Diagram:} {} ::msgcat::mcset ca {Line Diagrams} {} ::msgcat::mcset ca {Line divided. Can continue} {Línea dividida. Pot continuar} ::msgcat::mcset ca {line doesn't exist. You can continue (ESC to leave)} {Línea no existeix. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Line elements Detail set to %d:} {} ::msgcat::mcset ca {Line elements Width set to %g:} {} ::msgcat::mcset ca {Line Graph} {} ::msgcat::mcset ca {Line increment must be a positive integer} {} ::msgcat::mcset ca {line must be an arc. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {line number %i have higher} {Línea número %i té entititats d'ordre superior} ::msgcat::mcset ca {line number %i is %i times into volume generation} {Línea número %i està %i vegades dins de la creació de volum} ::msgcat::mcset ca {Line number must be a positive integer} {} ::msgcat::mcset ca {Line number out of limits} {} ::msgcat::mcset ca {Line number:} {} ::msgcat::mcset ca {Line reparametrized. Continue picking (ESC to leave)} {} ::msgcat::mcset ca {Line simplified. Continue picking (ESC to leave)} {} ::msgcat::mcset ca {Line Size} {} ::msgcat::mcset ca {Line to divide can have surfaces over it, but they can not be Coon surfaces. Convert to NURBS. Can continue} {} ::msgcat::mcset ca {Line variation} {} ::msgcat::mcset ca {Line Width should be between %g and %g pixels.} {} ::msgcat::mcset ca {Line's prismas of} {} ::msgcat::mcset ca {Line::CalcLengthToT, Unexpected type of line %d} {} ::msgcat::mcset ca Linear Lineal ::msgcat::mcset ca Lines Línees ::msgcat::mcset ca lines línees ::msgcat::mcset ca {Lines %d and %d too near} {} ::msgcat::mcset ca {lines already joined in point %i and point %i. Can continue} {} ::msgcat::mcset ca {lines already joined in point %i. Can continue} {línees ja juntades en el punts %i. Pot continuar} ::msgcat::mcset ca {Lines are not enough parallel. Check lines: %i %i and %i} {} ::msgcat::mcset ca {Lines converted to NURBS lines. Leaving} {Línees convertides a NURBS. Sortint} ::msgcat::mcset ca {Lines joined. Can continue} {Línees ajuntades. Pot continuar} ::msgcat::mcset ca {lines number: } {} ::msgcat::mcset ca {Lines read:} {} ::msgcat::mcset ca {LINES\n} {} ::msgcat::mcset ca {List Entities} {} ::msgcat::mcset ca {List Entities Tot} {} ::msgcat::mcset ca {list of units for magnitud %s not found} {} ::msgcat::mcset ca {List Poly Entities} {} ::msgcat::mcset ca {Listed %i new entities} {} ::msgcat::mcset ca {Load Database} {} ::msgcat::mcset ca {Load script} {} ::msgcat::mcset ca {Local axes} {Eixos locals} ::msgcat::mcset ca {Local axes '%s' already exists. Modify?} {Eixos locals '%s'ja existeixen. Modificar-los?} ::msgcat::mcset ca {Local axes '%s' are equivalent to '%s' axes.} {} ::msgcat::mcset ca {Local axes '%s' are equivalent to alternative automatic axes.} {} ::msgcat::mcset ca {Local axes '%s' are equivalent to automatic axes.} {} ::msgcat::mcset ca {Local axes '%s' are equivalent to global axes.} {} ::msgcat::mcset ca {Local axes '%s' created.} {} ::msgcat::mcset ca {Local axes '%s' deleted.} {} ::msgcat::mcset ca {Local axes '%s' deleted. Can continue} {Eixos locals '%s'borrats. Pot continuar} ::msgcat::mcset ca {Local axes '%s' modified.} {} ::msgcat::mcset ca {Local axes '%s' only implemented for lines and surfaces.} {} ::msgcat::mcset ca {Local Axes already defined} {} ::msgcat::mcset ca {Local Axes already defined, ignoring %s} {} ::msgcat::mcset ca {Local axes:} {} ::msgcat::mcset ca {Log10 of Distance between \nObserver and Object Center:} {} ::msgcat::mcset ca log10(Distance): {} ::msgcat::mcset ca Look {} ::msgcat::mcset ca {Look for:} {} ::msgcat::mcset ca Look: {} ::msgcat::mcset ca {looking for intersec, Not enough memory} {} ::msgcat::mcset ca {Looking for result header} {} ::msgcat::mcset ca {Macro '%s' does not exist. It cannot be executed} {} ::msgcat::mcset ca {Macro '%s' does not exist. Its cannot be deleted} {} ::msgcat::mcset ca {Macro '%s' does not exist. Its code cannot be viewed} {} ::msgcat::mcset ca {Main Mesh} {} ::msgcat::mcset ca {Maintain layers} {} ::msgcat::mcset ca {Making cloud surface} {} ::msgcat::mcset ca {Making Cut} {} ::msgcat::mcset ca {Making Cut, allocating more space for Cut plane infos} {} ::msgcat::mcset ca {Making Cut, allocating more space for Cuts} {} ::msgcat::mcset ca {Making Cut, allocating more space for Cuts select} {} ::msgcat::mcset ca {Making exact divide} {} ::msgcat::mcset ca {Making IsoCut} {} ::msgcat::mcset ca {Making IsoCut 2} {} ::msgcat::mcset ca Mantain {} ::msgcat::mcset ca {Mantain Boundary visualization after leaving function?} {Mantenir la visualització de contorns després de sortir de la funció?} ::msgcat::mcset ca {Mantain normal colors?} {Mantenir colors de normals?} ::msgcat::mcset ca Manual {} ::msgcat::mcset ca {Manual updates} {} ::msgcat::mcset ca {Mark break} {} ::msgcat::mcset ca {Massive Bodies? Yes - No ( %s).} {} ::msgcat::mcset ca {Massive Body} {} ::msgcat::mcset ca {massive/transparent 'mesh_name'} {} ::msgcat::mcset ca Material Material ::msgcat::mcset ca {Material '%s' does not exists. Try again (ESC to leave)} {} ::msgcat::mcset ca {Material doesn't exist. Try again} {Material no existeix. Intenti-ho de nou} ::msgcat::mcset ca {Material doesn't exist. Try again (ESC to leave)} {Material no existeix. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Material name} {} ::msgcat::mcset ca {Material name not correct} {} ::msgcat::mcset ca {Material name too large. Try again} {Nom de material massa llarg. Intenti-ho de nou} ::msgcat::mcset ca {Material number must be >0} {Número de material ha de ser major que zero} ::msgcat::mcset ca Material: Material: ::msgcat::mcset ca {Material: %s already exist, Redefine? (y/ESC)} {Material: %s ja existeix, Redefinir? (Si/ESC)} ::msgcat::mcset ca Materials Materials ::msgcat::mcset ca {Materials: } {} ::msgcat::mcset ca {Matrix label format:} {} ::msgcat::mcset ca {Max Color} {} ::msgcat::mcset ca {Max Options} {} ::msgcat::mcset ca Max. {} ::msgcat::mcset ca {Max. length} {} ::msgcat::mcset ca {Max. Size must be grater than min. size. Try again} {El tamany màxim ha der ser major que el mínim. Intenti-ho de nou} ::msgcat::mcset ca {Max. size must be grater than min. size. Try again} {El tamany màxim ha der ser major que el mínim. Intenti-ho de nou} ::msgcat::mcset ca Max: {} ::msgcat::mcset ca MaxColor {} ::msgcat::mcset ca Maximum {} ::msgcat::mcset ca {Maximum angle} {} ::msgcat::mcset ca {Maximum color changed to #%02x%02x%02x} {} ::msgcat::mcset ca {maximum color left unchanged} {} ::msgcat::mcset ca {Maximum dihedral angle} {} ::msgcat::mcset ca {Maximum meshing size:} {} ::msgcat::mcset ca {Maximum number of nested batchfile is 10. Leaving} {Número màxim de fitxers de comandes és 10. Sortint} ::msgcat::mcset ca {Maximum value} {} ::msgcat::mcset ca {Maximum value reset.} {} ::msgcat::mcset ca {May I continue?} {} ::msgcat::mcset ca {Mean value} {} ::msgcat::mcset ca {Menu ERROR: Option menu %s doesn't exist in the postprocess.} {} ::msgcat::mcset ca {Menu ERROR: Option menu %s doesn't exist in the preprocess.} {} ::msgcat::mcset ca {Menu with the main commands.} {} ::msgcat::mcset ca {Mesh %d of %d added.} {} ::msgcat::mcset ca {Mesh %d of %d read.} {} ::msgcat::mcset ca {Mesh %d of %d written.} {} ::msgcat::mcset ca {Mesh already deformed, try using 'Original' button first.} {} ::msgcat::mcset ca {Mesh always by default:} {} ::msgcat::mcset ca {Mesh cancelled} {Malla cancel.lada} ::msgcat::mcset ca {Mesh conditions are shown.} {} ::msgcat::mcset ca {Mesh correctly generated} {} ::msgcat::mcset ca {Mesh Deformation} {} ::msgcat::mcset ca {Mesh divided into %d connex components.} {} ::msgcat::mcset ca {Mesh file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {Mesh file '%s' successfully written.} {} ::msgcat::mcset ca {Mesh generated} {} ::msgcat::mcset ca {Mesh Generated. Press 'OK' to see it} {} ::msgcat::mcset ca {Mesh Generated. To see it use command 'meshview'} {Malla generada. Per veure-la usi el comando 'veure malla'} ::msgcat::mcset ca {Mesh has %i new elements and %i new nodes. Leaving} {} ::msgcat::mcset ca {Mesh must be of 3-noded triangles} {} ::msgcat::mcset ca {Mesh read. Total number of read elements: %d } {} ::msgcat::mcset ca {Mesh renumbered} {} ::msgcat::mcset ca {Mesh renumbered.} {} ::msgcat::mcset ca {Mesh renumbered. You can redraw} {Malla renumerada. Es pot redibuixar} ::msgcat::mcset ca {Mesh sizes asigned by background mesh.} {} ::msgcat::mcset ca {Mesh until end} {} ::msgcat::mcset ca mesh. {} ::msgcat::mcset ca {Mesh: %d Points & %d } {} ::msgcat::mcset ca MeshErrors {} ::msgcat::mcset ca {Meshes/Sets and results were transformed & extruded.} {} ::msgcat::mcset ca {Meshes/Sets and results were transformed & extruded. NO CUTS WERE TRASFORMED & EXTRUDED.} {} ::msgcat::mcset ca {Meshes/Sets and results were transformed.} {} ::msgcat::mcset ca {Meshes/Sets and results were transformed. NO CUTS WERE TRASFORMED.} {} ::msgcat::mcset ca {Meshing quadratic ContactSurface is not supported} {} ::msgcat::mcset ca {Meshing quadratic Tetrahedra must be done with RVOL. Check Preferences->Meshing} {} ::msgcat::mcset ca MeshSurface {} ::msgcat::mcset ca {Message in line number } {} ::msgcat::mcset ca Metallic {} ::msgcat::mcset ca {Mid Point} {} ::msgcat::mcset ca miliseconds {} ::msgcat::mcset ca {Min = %.5g Max = %.5g} {} ::msgcat::mcset ca {Min Color} {} ::msgcat::mcset ca {Min Options} {} ::msgcat::mcset ca {Min Size} {} ::msgcat::mcset ca Min. {} ::msgcat::mcset ca {Min. length} {} ::msgcat::mcset ca Min: {} ::msgcat::mcset ca MinColor {} ::msgcat::mcset ca Minimum {} ::msgcat::mcset ca {Minimum angle} {} ::msgcat::mcset ca {Minimum color changed to #%02x%02x%02x} {} ::msgcat::mcset ca {minimum color left unchanged} {} ::msgcat::mcset ca {Minimum dihedral angle} {} ::msgcat::mcset ca {Minimum edge} {} ::msgcat::mcset ca {Minimum meshing size:} {} ::msgcat::mcset ca {Minimum value} {} ::msgcat::mcset ca {Minimum value reset.} {} ::msgcat::mcset ca Mirror Mirall ::msgcat::mcset ca Mode {} ::msgcat::mcset ca {Mode changed to Add entities to selection} {} ::msgcat::mcset ca {Mode changed to Remove entities from selection} {} ::msgcat::mcset ca {Mode changed to Swap selection of entities} {} ::msgcat::mcset ca {mode has changed} {} ::msgcat::mcset ca Model {} ::msgcat::mcset ca {Model not correct, some data is lost} {} ::msgcat::mcset ca {Model Unit: } {} ::msgcat::mcset ca {Modelo_coefs_intersection_lines coefs} {} ::msgcat::mcset ca {Modelo_coefs_intersection_lines cuts} {} ::msgcat::mcset ca {Modelo_coefs_intersection_lines nodes} {} ::msgcat::mcset ca {Modelo_coefs_intersection_lines sets} {} ::msgcat::mcset ca {Modelo_intersec_linea_linea mallas} {} ::msgcat::mcset ca {Modelo_intersec_linea_linea puntocorte} {} ::msgcat::mcset ca {Modelo_intersec_linea_linea sets} {} ::msgcat::mcset ca {Modelo_puntos_intersection_lines cuts} {} ::msgcat::mcset ca {Modelo_puntos_intersection_lines pnts} {} ::msgcat::mcset ca {Modelo_puntos_intersection_lines sets} {} ::msgcat::mcset ca {Module downloaded} {} ::msgcat::mcset ca {Module info} {} ::msgcat::mcset ca {Module news} {} ::msgcat::mcset ca More {} ::msgcat::mcset ca {MORE ...} {} ::msgcat::mcset ca {More than one Surface set is needed to do the join process} {} ::msgcat::mcset ca {More than one Volume set is needed to do the join process} {} ::msgcat::mcset ca Move Moure ::msgcat::mcset ca {Movement type} {} ::msgcat::mcset ca {Moving Elements} {} ::msgcat::mcset ca {Moving Elemets of old mesh} {} ::msgcat::mcset ca {Moving Elemets of old set} {} ::msgcat::mcset ca MPEG {} ::msgcat::mcset ca ms. {} ::msgcat::mcset ca {Multiple copies} {Còpies múltiples} ::msgcat::mcset ca {Must be > 0.0. enter the factor for points radio %g: ( rmin: %g, rmax: %g)} {} ::msgcat::mcset ca {Must restart %s to update the change of GUI appearance to attenuated color} {} ::msgcat::mcset ca {Must restart %s to update the change of GUI appearance to standard color} {} ::msgcat::mcset ca {Must restart %s to use the new language} {} ::msgcat::mcset ca {Must select before some entity to begin this search.} {} ::msgcat::mcset ca {Must set before the current custom render} {} ::msgcat::mcset ca Name {} ::msgcat::mcset ca {Name '%s' changed to '%s'.} {} ::msgcat::mcset ca {Name must begin with letter. Try again} {El nom ha de començar amb una lletra. Intenti-ho de nou} ::msgcat::mcset ca {Name of color:} {} ::msgcat::mcset ca {Name of the macro must begin with a letter and contain only letters, numbers, _ and -} {} ::msgcat::mcset ca Name: {} ::msgcat::mcset ca {Names of the toolbars must end with 'bar'} {} ::msgcat::mcset ca {NASTRAN file readed} {} ::msgcat::mcset ca {NASTRAN mesh read} {} ::msgcat::mcset ca {Natural Coords are < 0.0} {} ::msgcat::mcset ca {Natural Coords are < 1.0} {} ::msgcat::mcset ca {Natural Coords are > 1.0} {} ::msgcat::mcset ca {Natural Coords out of range} {} ::msgcat::mcset ca NaturalTwist {} ::msgcat::mcset ca {Near plane:} {} ::msgcat::mcset ca {near point %lf %lf %lf} {} ::msgcat::mcset ca Never {} ::msgcat::mcset ca New Nou ::msgcat::mcset ca {New %s} {} ::msgcat::mcset ca {New clip limits are: Near %f; Far %f} {} ::msgcat::mcset ca {New customized render mode} {} ::msgcat::mcset ca {New Folder } {} ::msgcat::mcset ca {New GiD project} {} ::msgcat::mcset ca {New interval} {} ::msgcat::mcset ca {New Material: } {} ::msgcat::mcset ca {New Old} {Nou Vell} ::msgcat::mcset ca {New point:} {} ::msgcat::mcset ca {New results does not fit} {} ::msgcat::mcset ca {New set long name} {} ::msgcat::mcset ca {New set short name} {} ::msgcat::mcset ca {New value for variable '%s' is %s} {} ::msgcat::mcset ca {Next Operations will be repeated %d times} {} ::msgcat::mcset ca {Next point won't be the last. You can continue} {El següent punt no serà l'últim. Pot continuar} ::msgcat::mcset ca {Next Transformations will be created.} {} ::msgcat::mcset ca {Nice Detail:} {} ::msgcat::mcset ca No No ::msgcat::mcset ca {No 'End ResultRangesTable' found before the EOF \n} {} ::msgcat::mcset ca {No 'End Values' found before the EOF \n} {} ::msgcat::mcset ca {No 'ResultRangesTable' found before the EOF \n} {} ::msgcat::mcset ca {No 'Values' section found before the EOF \n} {} ::msgcat::mcset ca {No action has been performed. Check one or more options to proceed} {} ::msgcat::mcset ca {No Analysis loaded.} {} ::msgcat::mcset ca {No arcs selected. Leaving} {Cap arc seleccionat. Sortint} ::msgcat::mcset ca {No Arrow} {} ::msgcat::mcset ca {No arrow head} {} ::msgcat::mcset ca {No Bmp file was written.} {} ::msgcat::mcset ca {No changed Interval. Leaving} {Sortint. Cap canvi} ::msgcat::mcset ca {No changes in renumbering. Leaving} {Cap canvi en la funció de renumeració. Sortint} ::msgcat::mcset ca {No color choosen. Try again} {} ::msgcat::mcset ca {No correct polyLine. You can continue (ESC to leave)} {} ::msgcat::mcset ca {No covering mesh found.} {} ::msgcat::mcset ca {No Culling} {} ::msgcat::mcset ca {No Culling is done.} {} ::msgcat::mcset ca {No cut plane was saved.} {} ::msgcat::mcset ca {No cut set will be deleted.} {} ::msgcat::mcset ca {No deleted Interval. Leaving} {Cap interval borrat. Sortint} ::msgcat::mcset ca {No division has been made. Can continue} {} ::msgcat::mcset ca {No draw graphs} {} ::msgcat::mcset ca {No elements selected, nothing to do.} {} ::msgcat::mcset ca {No elements to calculate the bounding box.} {} ::msgcat::mcset ca {No entities erased. Leaving} {Cap entitat borrada. Sortint} ::msgcat::mcset ca {No entities list support in this mode.} {} ::msgcat::mcset ca {No entities selected. No changes} {} ::msgcat::mcset ca {No entities to list} {} ::msgcat::mcset ca {No entities to list mass properties} {} ::msgcat::mcset ca {No entity entered. Cannot extrude.} {} ::msgcat::mcset ca {No entity sent} {} ::msgcat::mcset ca {no Gauss Points were defined.} {} ::msgcat::mcset ca {No Gif file was written.} {} ::msgcat::mcset ca {No Graphs} {} ::msgcat::mcset ca {No hardcopy was done.} {} ::msgcat::mcset ca {NO JOIN} {} ::msgcat::mcset ca {No Jpeg file was written.} {} ::msgcat::mcset ca {No line created.} {} ::msgcat::mcset ca {No lines selected. Leaving} {} ::msgcat::mcset ca {No mesh frozen layers} {} ::msgcat::mcset ca {No Mesh Generated. Not correct entities} {Malla no generada. Entititats no correctes} ::msgcat::mcset ca {No meshing information} {} ::msgcat::mcset ca {No model loaded} {} ::msgcat::mcset ca {No new Interval. Leaving} {Cap nou interval. Sortint} ::msgcat::mcset ca {No new point is created. Can continue} {} ::msgcat::mcset ca {No new project created} {Cap projecte nou creat} ::msgcat::mcset ca {No nodes to renumber. Leaving} {No hi ha nodes per renumerar. Sortint} ::msgcat::mcset ca {No normal found} {} ::msgcat::mcset ca {No numbers} {} ::msgcat::mcset ca {No other line in this point. Can continue} {Cap més línea en aquest punt. Pot continuar} ::msgcat::mcset ca {No path entered.} {} ::msgcat::mcset ca {No path line entered} {} ::msgcat::mcset ca {No Png file was written.} {} ::msgcat::mcset ca {No polylines selected. Leaving} {Cap polilínea Seleccionada. Sortint} ::msgcat::mcset ca {No Postscript file was written.} {} ::msgcat::mcset ca {No Ppm file was written.} {} ::msgcat::mcset ca {No quitting} {No es surt} ::msgcat::mcset ca {No Results} {} ::msgcat::mcset ca {No results read.} {} ::msgcat::mcset ca {No Rotation is done.} {} ::msgcat::mcset ca {No select entities support in this mode.} {} ::msgcat::mcset ca {No Step loaded.} {} ::msgcat::mcset ca {No surface created.} {} ::msgcat::mcset ca {No surface set will be deleted.} {} ::msgcat::mcset ca {No surface sets to join.} {} ::msgcat::mcset ca {No surfaces selected. Leaving} {} ::msgcat::mcset ca {No SurfMeshes selected. Leaving} {Cap superfície-malla seleccionada. Sortint} ::msgcat::mcset ca {No Tga file was written.} {} ::msgcat::mcset ca {No Tiff file was written.} {} ::msgcat::mcset ca {No useful results found} {} ::msgcat::mcset ca {No valid range found, at least one must be defined, } {} ::msgcat::mcset ca {No valid surfaces selected (only 4-sided or NURBS are valid). Leaving} {} ::msgcat::mcset ca {No valid surfaces selected (only NURBS with good shape ratio are accepted). Leaving} {} ::msgcat::mcset ca {No valid volumes selected. Leaving} {Cap volum vàlid seleccionat. Sortint} ::msgcat::mcset ca {No volume created.} {} ::msgcat::mcset ca {No volume meshes to join.} {} ::msgcat::mcset ca {No volume set will be deleted.} {} ::msgcat::mcset ca {No Vrml file was written.} {} ::msgcat::mcset ca {No weight assigned. Leaving} {} ::msgcat::mcset ca {No Zoom/Pan is done.} {} ::msgcat::mcset ca {No, I wouldn't} {} ::msgcat::mcset ca {No. of Colours: <= %d} {} ::msgcat::mcset ca Node Node ::msgcat::mcset ca {Node %d with MeshingData} {} ::msgcat::mcset ca {Node out of range} {} ::msgcat::mcset ca {Node out of range \n} {} ::msgcat::mcset ca Nodes Nodes ::msgcat::mcset ca {Nodes only} {} ::msgcat::mcset ca {Nodes renumbered} {} ::msgcat::mcset ca Nodes: {} ::msgcat::mcset ca {NODES\n} {NODES\n} ::msgcat::mcset ca {Non rational} {} ::msgcat::mcset ca {Non-structured quadrilaterals can only be meshed with 2DUMG} {} ::msgcat::mcset ca {Non-structured volumes can only be tetrahedra or only points} {} ::msgcat::mcset ca None Cap ::msgcat::mcset ca {None of the %d elements matched the element type of the set '%s'.} {} ::msgcat::mcset ca {Norma v1} {} ::msgcat::mcset ca Normal Normal ::msgcat::mcset ca {Normal cannot be zero. Try again} {} ::msgcat::mcset ca {Normal Font} {} ::msgcat::mcset ca {Normal must be different from zero} {} ::msgcat::mcset ca {normal too small} {} ::msgcat::mcset ca {Normals color are mantained. Change render mode to forget} {Colors de normals seran mantinguts. Canvii el mode de il.luminació per oblidar-los} ::msgcat::mcset ca {Not Close Surface ,lines: } {} ::msgcat::mcset ca {Not Close Volume %d. See lines: } {} ::msgcat::mcset ca {Not Close Volume ,surfs: } {} ::msgcat::mcset ca {Not correct plane. Leaving move function. No changes} {Pla no correcte. Sortint de la funció de moure. Cap canvi} ::msgcat::mcset ca {Not drawing any more dynamic line} {} ::msgcat::mcset ca {Not enough arguments, should be %s %s %s %s analisis_name step_value result_name indexes} {} ::msgcat::mcset ca {Not enough memory} {} ::msgcat::mcset ca {not enough memory} {} ::msgcat::mcset ca {Not enough memory to render in High Resolution.} {} ::msgcat::mcset ca {Not enought memory} {} ::msgcat::mcset ca {Not exists any custom render.} {} ::msgcat::mcset ca {Not exists file '%s'} {} ::msgcat::mcset ca {Not possible in polylines (1st line). Can continue} {No és possible en polilínees (1era línea). Pot continuar} ::msgcat::mcset ca {Not possible in polylines (2nd line). Can continue} {No és possible en polilínees (2ona línea). Pot continuar} ::msgcat::mcset ca {Not suported: '%c'} {} ::msgcat::mcset ca {Not valid IGES file binary} {} ::msgcat::mcset ca {Not valid IGES file in compressed ASCII} {} ::msgcat::mcset ca {Not valid option. Try again.} {} ::msgcat::mcset ca {Note: In order to use this function, it is necessary to be connected to internet} {} ::msgcat::mcset ca {Nothing created. Leaving} {Res creat. Sortint} ::msgcat::mcset ca {Nothing done, turning the light to its previous location.} {} ::msgcat::mcset ca {Nothing done.} {} ::msgcat::mcset ca {Nothing intersected. Can continue (ESC to leave)} {} ::msgcat::mcset ca {Nothing is read} {} ::msgcat::mcset ca {Nothing is read, } {} ::msgcat::mcset ca {Nothing moved. Leaving} {Res mogut. Sortint} ::msgcat::mcset ca {Nothing read till this line:} {} ::msgcat::mcset ca {Nothing read. Leaving} {Res llegit. Sortint} ::msgcat::mcset ca {Nothing saved} {Res salvat} ::msgcat::mcset ca {Nothing to be done.} {} ::msgcat::mcset ca {Nothing to collapse.} {} ::msgcat::mcset ca {Nothing to repair. Everything was OK} {Res per arreglar. Tot estava correcte} ::msgcat::mcset ca {Nothing written} {} ::msgcat::mcset ca {Now boundary of curve is fixed} {} ::msgcat::mcset ca {Now boundary of curve is free} {} ::msgcat::mcset ca {Now boundary of patch is fixed} {} ::msgcat::mcset ca {Now boundary of patch is free} {} ::msgcat::mcset ca {Now I'm using the '%s' format. Which should I use now?} {} ::msgcat::mcset ca {Now on, conditions and local axes will be drawn} {A partir d'ara, es dibuixaran condicions i eixos locals} ::msgcat::mcset ca {Now on, conditions will be drawn by color} {} ::msgcat::mcset ca {Now on, conditions will NOT be drawn by color} {} ::msgcat::mcset ca {Now on, dimensions will be draw} {} ::msgcat::mcset ca {Now on, dimensions won't be drawn} {} ::msgcat::mcset ca {Now on, elements will be draw} {} ::msgcat::mcset ca {Now on, elements won't be drawn} {} ::msgcat::mcset ca {Now on, if all lines lie in a plane, surface will be trimmed. Enter lines} {} ::msgcat::mcset ca {Now on, lines will be divided} {} ::msgcat::mcset ca {Now on, lines will be divided and also extended} {} ::msgcat::mcset ca {Now on, lines will be draw} {} ::msgcat::mcset ca {Now on, lines will be superposed to solid} {} ::msgcat::mcset ca {Now on, lines will not be divided} {} ::msgcat::mcset ca {Now on, lines will NOT be superposed to solid} {} ::msgcat::mcset ca {Now on, lines won't be drawn} {} ::msgcat::mcset ca {Now on, nodes will be draw} {} ::msgcat::mcset ca {Now on, nodes won't be drawn} {} ::msgcat::mcset ca {Now on, only conditions will be drawn} {} ::msgcat::mcset ca {Now on, only local axes will be drawn} {A partir d'ara, només es dibuixaran els eixos locals} ::msgcat::mcset ca {Now on, only selected entities will be sent} {} ::msgcat::mcset ca {Now on, points will be draw} {} ::msgcat::mcset ca {Now on, points won't be drawn} {} ::msgcat::mcset ca {Now on, selected entities and its lower level entities will be sent} {} ::msgcat::mcset ca {Now on, surface will not be trimmed although all lines lie in a plane. Enter lines} {} ::msgcat::mcset ca {Now on, surfaces (and lines) will be divided} {} ::msgcat::mcset ca {Now on, surfaces will be divided} {} ::msgcat::mcset ca {Now on, surfaces will be draw} {} ::msgcat::mcset ca {Now on, surfaces will not be divided} {} ::msgcat::mcset ca {Now on, surfaces won't be drawn} {} ::msgcat::mcset ca {Now on, volumes will be draw} {} ::msgcat::mcset ca {Now on, volumes won't be drawn} {} ::msgcat::mcset ca {Now the Info Box will %sbe showed forever.} {} ::msgcat::mcset ca {Now, entities will be duplicated} {} ::msgcat::mcset ca {Now, entities will NOT be duplicated} {} ::msgcat::mcset ca {Now, Layers will be maintainted in copy} {} ::msgcat::mcset ca {Now, Layers will NOT be maintainted in copy} {} ::msgcat::mcset ca {Now, relative center is fixed} {Ara, centre relatiu està fixat} ::msgcat::mcset ca {Now, relative center is not fixed} {Ara, centre relatiu no està fixat} ::msgcat::mcset ca {Now, rotation is around x axe} {} ::msgcat::mcset ca {Now, rotation is around y axe} {} ::msgcat::mcset ca {Now, rotation is around z axe} {} ::msgcat::mcset ca {Now, the Light comes from behind the object} {} ::msgcat::mcset ca {Now, the Light comes from the front of the object} {} ::msgcat::mcset ca {Null text.} {} ::msgcat::mcset ca Num Num ::msgcat::mcset ca {Num divisions:} {} ::msgcat::mcset ca {Num Int.Lines} {} ::msgcat::mcset ca {Num Knots $type} {} ::msgcat::mcset ca {Num Knots:} {} ::msgcat::mcset ca {Num Lines} {} ::msgcat::mcset ca {Num of elems} {} ::msgcat::mcset ca {Num of nodes} {} ::msgcat::mcset ca {Num Points} {} ::msgcat::mcset ca {Num Points:} {} ::msgcat::mcset ca {Num Surfaces} {} ::msgcat::mcset ca {Num. Area\n} {} ::msgcat::mcset ca {Num. Length\n} {} ::msgcat::mcset ca {Num. Volume\n} {} ::msgcat::mcset ca {Number 0 not valid} {Número 0 no vàlid} ::msgcat::mcset ca {number must be between 1 and 300. Try again (ESC to leave)} {} ::msgcat::mcset ca {Number must be greater than 0. Enter number of divisions} {} ::msgcat::mcset ca {Number must be greater than 0. Enter number of lines} {Número ha de ser major que 0. Entri número de línees} ::msgcat::mcset ca {Number must be smaller than 21. Enter number of lines} {Número ha de ser menor que 21. Entri número de línees} ::msgcat::mcset ca {Number no correct, try again} {Número no correct. Intenti-ho de nou} ::msgcat::mcset ca {Number no correct. Continue joining} {Número no correcte. Pot continuar ajuntant} ::msgcat::mcset ca {Number no correct. Continue joining.2.} {Número no correcte. Pot continuar ajuntant} ::msgcat::mcset ca {Number not valid} {Número no vàlid} ::msgcat::mcset ca {Number of cells must be greater than zero.Try again} {} ::msgcat::mcset ca {Number of Colors} {} ::msgcat::mcset ca {Number of colors:} {} ::msgcat::mcset ca {Number of colors: } {} ::msgcat::mcset ca {Number of colours incorrect, it must be between %d and %d.} {} ::msgcat::mcset ca {Number of Colours to use set to %d.} {} ::msgcat::mcset ca {Number of line edges: %i} {Número de contorns de línea: %i} ::msgcat::mcset ca {number of lines != 4 (no surface created)} {Número de línees != 4 (cap superfície creada)} ::msgcat::mcset ca {Number of repetitions must be >0. Try again} {} ::msgcat::mcset ca {Number of sides must be greater than 2. Enter number of sides} {} ::msgcat::mcset ca {Number of steps for the animation should be > 1, and not '%s'} {} ::msgcat::mcset ca {Number of surface edges: %i} {Número de contorns de superfície: %i} ::msgcat::mcset ca {Number of textures:} {} ::msgcat::mcset ca {Number of wrong entities:} {} ::msgcat::mcset ca Numbers {} ::msgcat::mcset ca {Numbers no corrects} {} ::msgcat::mcset ca NumElems {} ::msgcat::mcset ca NurbLine {} ::msgcat::mcset ca {NurbLine %d, extrems swapped} {} ::msgcat::mcset ca {NURBS lines forced tangents. Continue} {} ::msgcat::mcset ca {NURBS lines forced tangents. Leaving} {} ::msgcat::mcset ca {NURBS lines simplified. Leaving} {} ::msgcat::mcset ca {NURBS surface movement} {} ::msgcat::mcset ca {NURBS surfaces forced tangents. Continue} {} ::msgcat::mcset ca {NURBS surfaces forced tangents. Leaving} {} ::msgcat::mcset ca {NURBS surfaces simplified. Leaving} {} ::msgcat::mcset ca NurbSurface {} ::msgcat::mcset ca {NurbSurface Splitted. Can continue (ESC to leave)} {} ::msgcat::mcset ca {NV - NodeValue field in ZONE record not supported} {} ::msgcat::mcset ca Nºpoints {} ::msgcat::mcset ca {O.k. User Colour map defined with the values entered.} {} ::msgcat::mcset ca {of Gauss Points in this line} {} ::msgcat::mcset ca {of the gauss points results for the nodes} {} ::msgcat::mcset ca Offset {} ::msgcat::mcset ca {Offset can only be made over lines or surfaces. Try again} {} ::msgcat::mcset ca {Offset can only be made over mesh elements. Try again} {} ::msgcat::mcset ca {Offset can only be used for lines, surfaces or mesh elements} {} ::msgcat::mcset ca {Offset factor not valid} {} ::msgcat::mcset ca {Ohh! Ohh!} {} ::msgcat::mcset ca Ok {} ::msgcat::mcset ca {OK to all} {} ::msgcat::mcset ca {OK. Don't improve mesh.} {} ::msgcat::mcset ca {OK. Don't improve surmeshes.} {} ::msgcat::mcset ca {OK. Improve mesh.} {} ::msgcat::mcset ca {OK. Improve surmeshes.} {} ::msgcat::mcset ca {Old mesh exists:} {Malla antiga existeix:} ::msgcat::mcset ca {Old mesh exists: (Erase/AddNoShare/AddShare/escape)} {Malla antiga existeix: (Borrar/AfegirNoCompartir/AfegirCompartir/escape)} ::msgcat::mcset ca {Old mesh exists: (Erase/AddNoShare/escape)} {Malla antiga existeix: (Borrar/AfegirNoCompartir/escape)} ::msgcat::mcset ca {Old mesh exists: (Erase/Append/Cancel)} {} ::msgcat::mcset ca {Old result: syntax error, no analysis type found, } {} ::msgcat::mcset ca {Old result: syntax error, no result name found, } {} ::msgcat::mcset ca {Old result: syntax error, unknown analysis type, } {} ::msgcat::mcset ca {Old result: syntax error, unknown result location, } {} ::msgcat::mcset ca {Old result: syntax error, unknown result type, } {} ::msgcat::mcset ca {Old result: too few results at EOF.} {} ::msgcat::mcset ca {Old results format style found in line %d.} {} ::msgcat::mcset ca on Connectada ::msgcat::mcset ca {on '%s'} {} ::msgcat::mcset ca {on line:} {} ::msgcat::mcset ca One {} ::msgcat::mcset ca {one by one} {} ::msgcat::mcset ca {One condition can't be removed} {} ::msgcat::mcset ca {One correct batch file name is needed} {} ::msgcat::mcset ca {One entity had already this number. Its number has been changed} {} ::msgcat::mcset ca {One filter must begin with: 'filter:'} {Un filtre ha de començar amb: 'filtre:'} ::msgcat::mcset ca {One integer number must be entered.} {} ::msgcat::mcset ca {One layer must be createt before sending to it the filtered elements} {} ::msgcat::mcset ca {One or more sets should be selected} {} ::msgcat::mcset ca {one over another} {} ::msgcat::mcset ca {One positive integer number must be entered.} {} ::msgcat::mcset ca {One positive number must be entered} {} ::msgcat::mcset ca {One positive number must be entered.} {} ::msgcat::mcset ca {One set should be selected} {} ::msgcat::mcset ca {one, eight or twenty-seven Gauss Points on hexahedras} {} ::msgcat::mcset ca {one, four or ten Gauss Points on tetrahedras} {} ::msgcat::mcset ca {one, three or six Gauss Points on triangles} {} ::msgcat::mcset ca {Only %d of %d elements have been moved to the set '%s', and matched its element type.} {} ::msgcat::mcset ca {Only %d points can be read to define Graf.} {} ::msgcat::mcset ca {Only calculate CircunCenter in triangle elements in 2D} {} ::msgcat::mcset ca {Only elements which match the element type of the selected set will be moved.} {} ::msgcat::mcset ca {Only elevations of the nodes will be shown} {} ::msgcat::mcset ca {Only local axes} {} ::msgcat::mcset ca OnlyPoints NomésPunts ::msgcat::mcset ca Opaque {} ::msgcat::mcset ca {Opaque Legends? Yes - No ( %s).} {} ::msgcat::mcset ca {Open GiD project} {} ::msgcat::mcset ca {Open other data option using this window} {} ::msgcat::mcset ca {Open template file} {} ::msgcat::mcset ca {Operation not allowed for lines. Can continue} {Operació no permesa per línees. Pot continuar} ::msgcat::mcset ca {Operation will be repeated %i times} {} ::msgcat::mcset ca Opposite {} ::msgcat::mcset ca {Option 'By geometry' assign smaller meshing sizes to details in geometry.\nNote: Option 'Correct meshing sizes' in Preferences perform both actions automatically.} {} ::msgcat::mcset ca {Option 'Correct incompatible sizes' compares close geometrical entities and change its sizes to make them compatible.\nNote: Option 'Correct meshing sizes' in Preferences perform both actions automatically.} {} ::msgcat::mcset ca {option normal for entering points is used: normal=A, with A the signed module of the movement} {} ::msgcat::mcset ca {Option not accepted. Some selected elements are not triangles or quadrilaterals} {Opció no acceptada. Alguns elements seleccionats no són triangles ni quadrilàters} ::msgcat::mcset ca {Option only useful when geometry viewing} {Opció útil només en visualització de geometria} ::msgcat::mcset ca {Options for smoothing in order to enhance the mesh after the generation. Options are: \nNormal: only the standard smooth is performed \nHighAngle: an additional smooth with angle criteria is performed \nHighGeom: an additional smooth with cordal error criteria is performed} {} ::msgcat::mcset ca {Options: %s} {} ::msgcat::mcset ca Original Original ::msgcat::mcset ca Orthogonal {} ::msgcat::mcset ca {Orthogonal view to z axis} {} ::msgcat::mcset ca other {} ::msgcat::mcset ca {Other %s off} {} ::msgcat::mcset ca {Other operations} {} ::msgcat::mcset ca {Out Max Color} {} ::msgcat::mcset ca {Out Min Color} {} ::msgcat::mcset ca {Out of Dimension in Vector} {} ::msgcat::mcset ca {Output FileName?} {} ::msgcat::mcset ca {output info for '%1\$s' %2\$s} {} ::msgcat::mcset ca {Output Scale?} {} ::msgcat::mcset ca {Output Scale? [ %s].} {} ::msgcat::mcset ca {Output view} {} ::msgcat::mcset ca Outside {} ::msgcat::mcset ca {Overwrite material: '%s'?} {} ::msgcat::mcset ca {Page Height changed to %g inches.} {} ::msgcat::mcset ca {Page Orientation changed to Landscape.} {} ::msgcat::mcset ca {Page Orientation changed to Portrait.} {} ::msgcat::mcset ca {Page Orientation: Landscape, Portrait? ( Postscript only) [ %s].} {} ::msgcat::mcset ca {Page Orientation?} {} ::msgcat::mcset ca {Page Width changed to %g inches.} {} ::msgcat::mcset ca Painting {} ::msgcat::mcset ca {Parameter not valid. } {Paràmetre no vàlid} ::msgcat::mcset ca {Parametric equations, valid all tcl funcions: + - * / %% abs cosh log sqrt acos double log10 srand asin exp pow tan atan floor rand tanh atan2 fmod round ceil hypot sin cos int sinh.} {} ::msgcat::mcset ca {Parasolid read} {} ::msgcat::mcset ca {Parsing comment patterns} {} ::msgcat::mcset ca {Part of polyline number %i is %i times into volume generation} {Troç de la polilínea %i està %i vegades dins la creació de volum} ::msgcat::mcset ca Password {} ::msgcat::mcset ca {Password error} {} ::msgcat::mcset ca {Password for remote server} {} ::msgcat::mcset ca {Password not valid. Only valid characters: 'a-zA-Z0-0#-_'} {} ::msgcat::mcset ca {Path line} {} ::msgcat::mcset ca {Path line cannot be a boundary line of a surface.} {} ::msgcat::mcset ca {Path line cannot be one of the lines to be extruded.} {} ::msgcat::mcset ca {Path line is not in the project.} {} ::msgcat::mcset ca {Path polyline has too much component lines or this number is not well defined.} {} ::msgcat::mcset ca {Per command delay:} {} ::msgcat::mcset ca {Per stop delay:} {} ::msgcat::mcset ca Percentage {} ::msgcat::mcset ca {Percentage Done} {} ::msgcat::mcset ca {Perspective projection} {} ::msgcat::mcset ca Pick Seleccionar ::msgcat::mcset ca {Pick point to get its coordinates} {Seleccioni un punt per obtenir les seves coordenades} ::msgcat::mcset ca {Pick a line in the code to delete its mark} {} ::msgcat::mcset ca {Pick a line in the code to set a mark there} {} ::msgcat::mcset ca {Pick an existing point} {Seleccioni un punt existent} ::msgcat::mcset ca {Pick another point to edit (ESC to leave)} {Seleccioni un altre punt per editar (ESC per sortir)} ::msgcat::mcset ca {Pick arc} {} ::msgcat::mcset ca {Pick first destination point} {} ::msgcat::mcset ca {Pick first point} {} ::msgcat::mcset ca {Pick first source point} {} ::msgcat::mcset ca {Pick images >>>} {} ::msgcat::mcset ca {Pick LEFTMOUSE to desplace view (ESC to quit)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to desplace view (ESC to quit) ( if present, mouse wheel zooms)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to desplace view (ESC to quit).} {} ::msgcat::mcset ca {Pick LEFTMOUSE to rotate (ESC to quit)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to rotate (ESC to quit) ( if present, mouse wheel zooms)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to rotate (ESC to quit).} {} ::msgcat::mcset ca {Pick LEFTMOUSE to rotate around z axe or (x/y/z) to select axe} {} ::msgcat::mcset ca {Pick LEFTMOUSE to rotate around z axe or (x/y/z) to select axe ( if present, mouse wheel zooms)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to zoom view (ESC to quit)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to zoom view (ESC to quit) ( if present, mouse wheel zooms)} {} ::msgcat::mcset ca {Pick LEFTMOUSE to zoom view (ESC to quit).} {} ::msgcat::mcset ca {Pick point into a line} {Seleccioni punt dins una línea} ::msgcat::mcset ca {Pick point into a line to get a tangent} {} ::msgcat::mcset ca {Pick point into a surface} {} ::msgcat::mcset ca {Pick point into a surface to get its normal} {} ::msgcat::mcset ca {Pick point into an element} {} ::msgcat::mcset ca {Pick point into an element to get its normal} {} ::msgcat::mcset ca {Pick rotation center} {} ::msgcat::mcset ca {Pick second destination point} {} ::msgcat::mcset ca {Pick second point} {} ::msgcat::mcset ca {Pick second source point} {} ::msgcat::mcset ca {Pick start of undo region} {} ::msgcat::mcset ca {Pick the point where to move} {Seleccioni el punt a on moure's} ::msgcat::mcset ca {Pick third destination point} {} ::msgcat::mcset ca {Pick third source point} {} ::msgcat::mcset ca {Pick vertex point} {} ::msgcat::mcset ca {PlainDeformationMatrix, MainMatrix, LocalAxes; } {} ::msgcat::mcset ca {plane ( %g, %g, %g) and triangle ( %g, %g, %g)} {} ::msgcat::mcset ca {Plane parallel} {} ::msgcat::mcset ca {Plane through} {} ::msgcat::mcset ca {Plane will be defined by 2 points. Continue entering points} {} ::msgcat::mcset ca {Plane will be defined by 3 points. Continue entering points} {} ::msgcat::mcset ca Plastic {} ::msgcat::mcset ca {Play sound} {} ::msgcat::mcset ca {Please check ResultView or Deformation} {} ::msgcat::mcset ca {Please choose a Main Deformation Visualization first.} {} ::msgcat::mcset ca {Please choose a Main Deformation Visualization first. Or check 'Deformation' out.} {} ::msgcat::mcset ca {Please choose a Results Visualization first.} {} ::msgcat::mcset ca {Please choose a Results Visualization first. Or check 'Results' out.} {} ::msgcat::mcset ca {Please display the mesh first in postprocess.} {} ::msgcat::mcset ca {Please load a MODEL first} {} ::msgcat::mcset ca {Please load a model first.} {} ::msgcat::mcset ca {Please select a BMP/PPM file of max. %dx%d to use as Environment Image.} {} ::msgcat::mcset ca {Please select a BMP/PPM file to draw it over points.} {} ::msgcat::mcset ca {Please select a JPEG/TGA/BMP/PPM file as Background Image.} {} ::msgcat::mcset ca {Please select a set or a cut.} {} ::msgcat::mcset ca {Please select a STEP first} {} ::msgcat::mcset ca {Please select a Step first} {} ::msgcat::mcset ca {Please select only one Volume/Surface/Cut.} {} ::msgcat::mcset ca {Please set X axis first} {} ::msgcat::mcset ca {Please set Y axis first} {} ::msgcat::mcset ca {Please wait ... } {} ::msgcat::mcset ca {Please, change first to a Flat/Smooth lighting render.} {} ::msgcat::mcset ca {Please, choosing a Contour visualization first.} {} ::msgcat::mcset ca {Please, save the problem before transforming it.} {Sisplau, salvi el problema abans de transformar-lo} ::msgcat::mcset ca {Please, select a process first.} {} ::msgcat::mcset ca PLSurface {} ::msgcat::mcset ca {Png file '%s' created.} {} ::msgcat::mcset ca {Png file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {Png hardcopy} {} ::msgcat::mcset ca {PNG write} {} ::msgcat::mcset ca Point Punt ::msgcat::mcset ca point punt ::msgcat::mcset ca {point %i doesn't belong to surface %i. Try again} {Punt %i no pertany a la superfície %i. Intenti-ho de nou} ::msgcat::mcset ca {point %i is not correct. Try again} {Punt %i no és correcte. Intenti-ho de nou} ::msgcat::mcset ca {Point Analysis} {} ::msgcat::mcset ca {Point before mapping. Coords x=%f, y=%f, z=%f} {} ::msgcat::mcset ca {Point detail set to Nice, level %d.} {} ::msgcat::mcset ca {Point detail set to Quick.} {} ::msgcat::mcset ca {Point Graph} {} ::msgcat::mcset ca {Point information.} {} ::msgcat::mcset ca {Point is not inside NURBS line. Can continue} {El punt no està a dins de la línea NURBS. Pot continuar} ::msgcat::mcset ca {Point is not inside NURBS surface. Can continue} {El punt no està a dins de la superfície NURBS. Pot continuar} ::msgcat::mcset ca {Point is not interior to polyline. Try again (ESC to leave)} {Punt no és interior a la polilínea. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Point not valid. Try again (ESC to leave)} {} ::msgcat::mcset ca {Point number %d doesn't exist} {} ::msgcat::mcset ca {Point number %i. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {Point number %i. Coords x=%s, y=%s, z=%s . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {Point number -. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {Point number out of range?} {} ::msgcat::mcset ca {Point Options} {} ::msgcat::mcset ca {Point Options error(FillPostPointOptionsWInfo): %d} {} ::msgcat::mcset ca {Point radio: select analysis} {} ::msgcat::mcset ca {Point radio: select result to use as point radio} {} ::msgcat::mcset ca {Point radio: select result's component to use as point radio} {} ::msgcat::mcset ca {Point radio: select step} {} ::msgcat::mcset ca {Point radio: using %s with factor %g.} {} ::msgcat::mcset ca {Point rejected. It was equal than last one} {Punt rebutjat. Era igual que l'últim} ::msgcat::mcset ca {Point Size %s set to %g:} {} ::msgcat::mcset ca {Point size should be between %g and %g pixels.} {} ::msgcat::mcset ca {Point size:} {} ::msgcat::mcset ca {Point texture file} {} ::msgcat::mcset ca {Point to join in 1st line is not an extreme point} {Punt per ajuntar en la 1era línea no és un punt extrem} ::msgcat::mcset ca {Point to join in 2nd line is not an extreme point} {Punt per ajuntar en la 2ona línea no és un punt extrem} ::msgcat::mcset ca Points Punts ::msgcat::mcset ca {Points and '%s'} {} ::msgcat::mcset ca {Points must be coplanar. Try again (ESC to leave)} {} ::msgcat::mcset ca {Points not correct. No arc created} {Punt no correcte. Cap arc creat} ::msgcat::mcset ca {Points not correct. Try again} {Punt no correcte. Intenti-ho de nou} ::msgcat::mcset ca {Points using %s with factor %g as radio.} {} ::msgcat::mcset ca {POINTS\n} {} ::msgcat::mcset ca {PointSteps: } {} ::msgcat::mcset ca PolyLine {} ::msgcat::mcset ca {polyline %i have parts of it without surface} {Polilínea %i té parts de ella sense superfície} ::msgcat::mcset ca {Polyline divided into %i parts} {} ::msgcat::mcset ca {Polyline divided. Can continue} {Polilínea dividida. Pot continuar} ::msgcat::mcset ca {PolyLines changed. Leaving} {Les polilínees han canviat. Sortint} ::msgcat::mcset ca {polyLines exploded. Leaving} {} ::msgcat::mcset ca PolySurface {} ::msgcat::mcset ca {PolySurface %d: CreateFaceContainer Time=%lf seconds} {} ::msgcat::mcset ca {PolySurface::CreateFaceContainer, fail GiveUVFromCoord in surf %d} {} ::msgcat::mcset ca {PolySurface::CreateFaceContainer, nod %lf,%lf,%lf surfbase=NULL} {} ::msgcat::mcset ca {PolySurfaceMapper::GiveNormal, Error, type of surface unexpected} {} ::msgcat::mcset ca {PolySurfaceMapper::GiveNormalFromCoord, Error, type of surface unexpected} {} ::msgcat::mcset ca Port: {} ::msgcat::mcset ca Portrait {} ::msgcat::mcset ca {Position not valid. Enter Knot position (0.0} {} ::msgcat::mcset ca {Select sets to add or remove} {} ::msgcat::mcset ca {Select Spline to edit} {Seleccioni línea NURBS per editar} ::msgcat::mcset ca {Select stream lines to be deleted} {} ::msgcat::mcset ca {Select surface (ESC to leave)} {Seleccioni superfície (ESC per sortir)} ::msgcat::mcset ca {Select surface for init search volume} {} ::msgcat::mcset ca {Select surface sets to delete} {} ::msgcat::mcset ca {Select surface to divide} {} ::msgcat::mcset ca {Select surfaces to convert to NURBS surfaces (ESC to finish)} {} ::msgcat::mcset ca {Select surfaces to swap its sense} {Sel.leccini superfícies per invertir el seu sentit} ::msgcat::mcset ca {Select SurfMeshes to edit} {Seleccioni superfícies-malla per editar} ::msgcat::mcset ca {select the $nombre 'from' view} {} ::msgcat::mcset ca {select the $nombre 'to' view} {} ::msgcat::mcset ca {Select the desired window configuration} {} ::msgcat::mcset ca {Select the destination volume/surface} {} ::msgcat::mcset ca {Select the point to do its analysis} {} ::msgcat::mcset ca {Select the result visualization state to remove} {} ::msgcat::mcset ca {Select the SET whose nodes will be collapsed.} {} ::msgcat::mcset ca {Select the start point of the graph} {} ::msgcat::mcset ca {Select type of entity to draw. Press 'Escape' to leave} {} ::msgcat::mcset ca {Select untrimmed NURBS surfaces to force tangents (ESC to finish)} {} ::msgcat::mcset ca {Select volume set to add or remove} {} ::msgcat::mcset ca {Select volume set to delete} {} ::msgcat::mcset ca {Select volume where to add hole} {Seleccioni el volum al qual afegir el forat} ::msgcat::mcset ca {Selected %d elements.} {} ::msgcat::mcset ca {Selected %d entities.} {} ::msgcat::mcset ca {Selected %d figures} {} ::msgcat::mcset ca {selected %i arcs (rejected %i lines). Swap them?} {} ::msgcat::mcset ca {selected %i arcs . Swap them?} {} ::msgcat::mcset ca {Selected %i entities to switch on its label} {} ::msgcat::mcset ca {selected %i lines (rejected %i lines).Convert them to NURBS lines?} {} ::msgcat::mcset ca {selected %i lines (rejected %i lines).Create blend surfaces?} {} ::msgcat::mcset ca {selected %i lines (rejected %i lines).Force tangents?} {} ::msgcat::mcset ca {selected %i lines (rejected %i lines).Simplify?} {} ::msgcat::mcset ca {selected %i lines.Intersect each other?} {} ::msgcat::mcset ca {selected %i new entities} {} ::msgcat::mcset ca {Selected %i new lines. Rejected %i. They have structured surfaces over} {%i noves línees seleccionades. Rebutjades %i. Tenen superfícies estructurades a sobre} ::msgcat::mcset ca {Selected %i new surfaces. Rejected %i. They have structured volumes over} {%i noves superfícies seleccionades. Rebutjades %i. Tenen volums estructurats a sobre} ::msgcat::mcset ca {selected %i PolyLines (rejected %i lines). Choose: } {Seleccionades %i polilínees (rebutjdes %i línees). Esculli: } ::msgcat::mcset ca {selected %i polyLines (rejected %i lines).Explode them?} {} ::msgcat::mcset ca {selected %i PolyLines. Choose: } {Seleccionades %i polilínees. Esculli: } ::msgcat::mcset ca {selected %i surfaces (rejected %i surfaces).\nWarning: Some polylines are exploded, and other surfaces can require transformation\nConvert them to NURBS surfaces?} {} ::msgcat::mcset ca {selected %i surfaces (rejected %i surfaces).Convert them to NURBS surfaces?} {} ::msgcat::mcset ca {selected %i surfaces (rejected %i surfaces).Force tangents?} {} ::msgcat::mcset ca {selected %i surfaces (rejected %i surfaces).Simplify?} {} ::msgcat::mcset ca {Selected %i SurfMeshes (rejected %i lines). Choose: } {} ::msgcat::mcset ca {Selected %i SurfMeshes. Choose: } {} ::msgcat::mcset ca {Selected %s %s. Choose operation} {} ::msgcat::mcset ca {Selected 1 new entity} {} ::msgcat::mcset ca {Selected a new rotation point} {} ::msgcat::mcset ca {Selected elements should be moved to a New set or to an Old set:} {} ::msgcat::mcset ca {Selected entities will be added to selection} {} ::msgcat::mcset ca {Selected entities will be removed from selection} {} ::msgcat::mcset ca {Selected entities will be xored to selection: if it is selected twice it will be removed from selection} {} ::msgcat::mcset ca {Selected entity does not belong to one layer} {} ::msgcat::mcset ca {Selected line isn't a NURB NURBS line. Try again (ESC to leave)} {La línea seleccionada no és una línea NURBS. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Selected line isn't a spline. Try again (ESC to leave)} {La línea seleccionada no és una NURBS. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Selected new analisis and step.} {} ::msgcat::mcset ca {Selected Stream Line # %d of mesh %d.} {} ::msgcat::mcset ca {Selected surface cannot have higher entities. Try again} {} ::msgcat::mcset ca {Selected surface is not a NurbSurface. Try again} {} ::msgcat::mcset ca {Selected surface isn't a NURB surface. Try again (ESC to leave)} {La superfície seleccionada no és una NURBS. Intenti-ho de nou (ESC per sortir)} ::msgcat::mcset ca {Selecting elements from Mesh} {} ::msgcat::mcset ca {Selecting elements from Set} {} ::msgcat::mcset ca {selecting in form 'first:last' needs both numbers bigger than zero and last > first or omitting one of them. Try again} {Seleccionant en la forma 'primer:últim' necessita que els dos números siguin majors que zero i l'últim major que el primer. Intenti-ho de nou} ::msgcat::mcset ca {Selecting just one entity} {} ::msgcat::mcset ca {Selecting list geometric properties} {} ::msgcat::mcset ca {Selecting list mass properties} {} ::msgcat::mcset ca {Selecting points, lines, surfaces, volumes or layers only %s belonging to that level are displayed} {} ::msgcat::mcset ca {Selecting several entities} {} ::msgcat::mcset ca {Selecting twice the same point. Can continue} {} ::msgcat::mcset ca {Selection buffer cleared} {} ::msgcat::mcset ca {Selection Window} {} ::msgcat::mcset ca {Selects the status of the toolbar. Options are:\n inside: Toolbar will be inside the main program window\n outside: Toolbar will become an independent window\n none: Toolbar will be deactivated} {} ::msgcat::mcset ca Send Enviar ::msgcat::mcset ca {Send entities to another set} {} ::msgcat::mcset ca {Send entities to back/front of a layer (entities in back are not drawn and frozen)} {} ::msgcat::mcset ca {Send entities to back/front of a Set (entities in back are not drawn)} {} ::msgcat::mcset ca {Send others to back} {} ::msgcat::mcset ca {Send others to layer back} {} ::msgcat::mcset ca {Send the selected entities to a layer. If 'Also lower entities' is checked, the subentities are also send to the layer} {} ::msgcat::mcset ca {Send To} {} ::msgcat::mcset ca {Send to} {} ::msgcat::mcset ca {Send to back} {} ::msgcat::mcset ca {Send To Layer} {} ::msgcat::mcset ca {Send to layer back} {} ::msgcat::mcset ca {Sent %i new entities to back layer} {} ::msgcat::mcset ca {Sent to front %i entities from layer %s} {} ::msgcat::mcset ca {Sent to front TOTAL %i entities from all layers} {} ::msgcat::mcset ca {Separated contact volumes will be created} {} ::msgcat::mcset ca {Separated contact volumes will NOT be created} {} ::msgcat::mcset ca set {} ::msgcat::mcset ca {Set %d of %d added.} {} ::msgcat::mcset ca {Set %d of %d read.} {} ::msgcat::mcset ca {Set %d of %d written.} {} ::msgcat::mcset ca {Set %s axis} {} ::msgcat::mcset ca {Set '%s' will be drawn opaque.} {} ::msgcat::mcset ca {Set '%s' will be drawn transparent.} {} ::msgcat::mcset ca {Set current custom render '%s'} {} ::msgcat::mcset ca {Set decrement factor to %lf} {} ::msgcat::mcset ca {Set divisions} {} ::msgcat::mcset ca {Set Divisions for '%c' Value ( Graph - %d).} {} ::msgcat::mcset ca {Set Divisions for '%c' Value (Graph - %d).} {} ::msgcat::mcset ca {Set label} {} ::msgcat::mcset ca {Set Label for '%c' Axis (Previous: '%s').} {} ::msgcat::mcset ca {Set Limits} {} ::msgcat::mcset ca {Set max value} {} ::msgcat::mcset ca {Set Maximum '%c' Value ( Graph - %g).} {} ::msgcat::mcset ca {Set maximum value} {} ::msgcat::mcset ca {Set Maximum value to: %g.} {} ::msgcat::mcset ca {Set min value} {} ::msgcat::mcset ca {Set Minimum '%c' Value ( Graph - %g).} {} ::msgcat::mcset ca {Set minimum value} {} ::msgcat::mcset ca {Set Minimum value to: %g.} {} ::msgcat::mcset ca {Set not valid.} {} ::msgcat::mcset ca {Set Page} {} ::msgcat::mcset ca {Set the current layer (the new entities are created in this layer).} {} ::msgcat::mcset ca {Set the GUI appearance to standard or attenuated color.\n (the change is updated restarting $GidPriv(ProgName))} {} ::msgcat::mcset ca {Set Title of the Graf (Previous: '%s').} {} ::msgcat::mcset ca {Set Value} {} ::msgcat::mcset ca {setdrive %1\$s: '%2\$s' - %3\$s} {} ::msgcat::mcset ca {setnetdrive %1\$s: '%2\$s' - %3\$s} {} ::msgcat::mcset ca sets {} ::msgcat::mcset ca {Setting to Opaque Legends.} {} ::msgcat::mcset ca {Setting to Transparent Legends.} {} ::msgcat::mcset ca {Several Results} {} ::msgcat::mcset ca Shapefile {} ::msgcat::mcset ca {Shapefile read} {} ::msgcat::mcset ca {ShapeMultiPatch::CreateFigureGiD, bad Ring without previous FIRSTRING} {} ::msgcat::mcset ca {ShapeMultiPatch::CreateFigureGiD, unexpected part type} {} ::msgcat::mcset ca {ShapeMultiPatch::CreateFigureGiD. Fail surface creation: %s} {} ::msgcat::mcset ca Shininess: {} ::msgcat::mcset ca {shortest distance is %lf. Creating %i points?} {} ::msgcat::mcset ca {shortest distance is %lf. Join 2nd point to 1st?} {} ::msgcat::mcset ca {shortest distance is between point %i and point %i =%lf. Join these points and destroy line %i?} {La distància més curta és entre el punt %i i el punt %i =%lf. Ajuntar aquests punts i destruir línea %i?} ::msgcat::mcset ca {shortest distance is between point %i and point %i =%lf. Join these points?} {La distància més curta és entre el punt %i i el punt %i =%lf. Ajuntar aquests punts?} ::msgcat::mcset ca {should be: ResultDescription \"Result name\" result_type\n} {} ::msgcat::mcset ca {Should I auto crop the image?} {} ::msgcat::mcset ca {Should I auto crop the image? Yes - No ( %s).} {} ::msgcat::mcset ca {Should I create the transformations?} {} ::msgcat::mcset ca {Should I draw the '%s' transparent? Yes - No ( %s).} {} ::msgcat::mcset ca {Should I draw the interior of the set '%s' ( %s)?} {} ::msgcat::mcset ca {Should I draw the interior of the set '%s'? Yes - No ( %s).} {} ::msgcat::mcset ca {Should I draw the set '%s' transparent ( %s)?} {} ::msgcat::mcset ca {Should I print the logo?} {} ::msgcat::mcset ca {Should I print the logo? Yes - No ( %s).} {} ::msgcat::mcset ca {Should I save a Step animation at each redraw [ %s]?} {} ::msgcat::mcset ca {Should I show the Graphs I have?} {} ::msgcat::mcset ca {Should I show the grids} {} ::msgcat::mcset ca {Should I use the transformations?} {} ::msgcat::mcset ca {Should the covering mesh be shown ( Yes - No)? [ %s]} {} ::msgcat::mcset ca {Should the covering mesh be shown? [ %s]} {} ::msgcat::mcset ca Show {} ::msgcat::mcset ca {Show Axes? Yes - No ( %s).} {} ::msgcat::mcset ca {Show comment lines?} {} ::msgcat::mcset ca {Show comment lines? Yes - No ( %s).} {} ::msgcat::mcset ca {Show elevations} {} ::msgcat::mcset ca {show elevations?} {} ::msgcat::mcset ca {Show info} {} ::msgcat::mcset ca {Show Legends? Yes - No ( %s).} {} ::msgcat::mcset ca {Show Min Max} {} ::msgcat::mcset ca {Show Min Max '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Show Min Max:} {} ::msgcat::mcset ca {Show the Info Box? Yes - No ( %s).} {} ::msgcat::mcset ca {Show this message again} {} ::msgcat::mcset ca {Show Title} {} ::msgcat::mcset ca {Show title on the legend?} {} ::msgcat::mcset ca {Show title on the legend? Yes - No ( %s).} {} ::msgcat::mcset ca {Showing Axes.} {} ::msgcat::mcset ca {Showing Legends.} {} ::msgcat::mcset ca {Shown Sets for All Steps} {} ::msgcat::mcset ca {Shown Sets for This Step} {} ::msgcat::mcset ca {Shows the code of the selected macro} {} ::msgcat::mcset ca {Shrink windows when selecting} {} ::msgcat::mcset ca {Shutting off the covering mesh} {} ::msgcat::mcset ca {Signaling %s %i. Enter more} {Senyalant %s %i. Entri'n més} ::msgcat::mcset ca {Signaling gauss point number %i. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {Signaling point number %i. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca {Signaling point number -. Coords x=%f, y=%f, z=%f . Enter more points (ESC to leave)} {} ::msgcat::mcset ca Simplify {} ::msgcat::mcset ca {Singular Matrix, the inverse not exists.} {} ::msgcat::mcset ca Size {} ::msgcat::mcset ca {Size & detail . . .} {} ::msgcat::mcset ca {Size labels off. Press 'Escape' to leave} {} ::msgcat::mcset ca {Size labels on. Press 'Escape' to leave} {} ::msgcat::mcset ca {Size must be greater than zero. Try again} {El tamany a de ser més gran que zero. Intenti-ho de nou} ::msgcat::mcset ca {Size must be greater than zero.Enter size of elements to be generated} {} ::msgcat::mcset ca {Size must be positive or zero. Try again} {El tamany ha de ser positiu o zero. Intenti-ho de nou} ::msgcat::mcset ca {Size must be positive. Try again} {El tamany ha de ser positiu. Intenti-ho de nou} ::msgcat::mcset ca {Size transitions will be smoother} {Les transicions de tamanys seran més suaus} ::msgcat::mcset ca {Size will be assigned to all entities that need a smaller one due to its geometry} {S'assignarà tamany a totes les entitats que en necessitin un de menor degut a la seva geometria} ::msgcat::mcset ca {Size will be assigned to honour a maximum cordal error} {S'assignarà tamanys per respectar un error cordal màxim} ::msgcat::mcset ca {Skip Messages} {} ::msgcat::mcset ca slower {} ::msgcat::mcset ca {Smaller cordal errors will asign smaller sizes to entities with high curvature} {} ::msgcat::mcset ca {Smooth Contour Fill} {} ::msgcat::mcset ca {Smooth Contour Fill ( %s) '%s': Min = %.5g, Max = %.5g} {} ::msgcat::mcset ca {Smooth Contour Fill:} {} ::msgcat::mcset ca {Smoothed elems(deg):} {} ::msgcat::mcset ca {Smoothing finished.} {} ::msgcat::mcset ca {Smoothing type} {} ::msgcat::mcset ca Smoothing: {} ::msgcat::mcset ca {Some errors found in the FEMAP file:} {} ::msgcat::mcset ca {Some errors found in the results file:} {} ::msgcat::mcset ca {Some errors found in the TECPLOT file:} {} ::msgcat::mcset ca {Some polylines have a bad defined structured size} {Algunes polilínees tenen un tamany estructurat mal definit} ::msgcat::mcset ca {Some steps already exists for this analysis} {} ::msgcat::mcset ca {Some Troubles with} {} ::msgcat::mcset ca {Some warnings are displayed} {Alguns avisos són ensenyats} ::msgcat::mcset ca {Something happens with the colors: %1\$s - %2\$s} {} ::msgcat::mcset ca {Sorry but a file name is needed to save the animation.} {} ::msgcat::mcset ca {Sorry but couldn't close Clipboard.} {} ::msgcat::mcset ca {Sorry but couldn't Empty Clipboard.} {} ::msgcat::mcset ca {Sorry but couldn't open clipboard.} {} ::msgcat::mcset ca {Sorry but couldn't paste data to Clipboard.} {} ::msgcat::mcset ca {Sorry but only %d of %d cut-wire-points lie on the mesh.} {} ::msgcat::mcset ca {Sorry but the license for this program has expired\n} {} ::msgcat::mcset ca {Sorry but the license for this program is not valid\n} {} ::msgcat::mcset ca {Sorry but the password entered is for a GiD installation on a server.\n} {} ::msgcat::mcset ca {Sorry but the password entered is for a GiD installation on a server.\nContact your software dealer if a password for a local GiD installation is needed.} {} ::msgcat::mcset ca {Sorry but the password entered is for a local GiD installation.\n} {} ::msgcat::mcset ca {Sorry but the password entered is for a local GiD installation.\nContact your software dealer if a password for an installation on a server is needed.} {} ::msgcat::mcset ca {Sorry but the password for this program has expired.\nContact your dealer if you want to continue using this soft.} {} ::msgcat::mcset ca {Sorry but the password for this program has expired\n} {} ::msgcat::mcset ca {Sorry but the password for this program is not valid.\nContact your dealer if you want to continue using this soft.} {} ::msgcat::mcset ca {Sorry but the password for this program is not valid\n} {} ::msgcat::mcset ca {Sorry but with the new version 6.0 of GiD, password and licences are incompatible with version 5 passwords and licenses.\n\nYou can get a temporal password at http://gid.cimne.com .\n\nContact your dealer if you want to continue using this soft.} {} ::msgcat::mcset ca {Sorry but, couldn't find a free drive letter.} {} ::msgcat::mcset ca {Sorry but, culdn't find a free drive letter.} {} ::msgcat::mcset ca {Sorry, a set must be selected.} {} ::msgcat::mcset ca {Sorry, but a Animation file must be STARTed before.} {} ::msgcat::mcset ca {Sorry, but at the moment all the meshes/sets must be of the same element type.} {} ::msgcat::mcset ca {Sorry, but coldn't map points to get ST's.} {} ::msgcat::mcset ca {Sorry, but could not find '%s\\Scripts' or '%s\\Scripts'.} {} ::msgcat::mcset ca {Sorry, but couldn't create a bitmap for the printer.} {} ::msgcat::mcset ca {Sorry, but couldn't end the Document.} {} ::msgcat::mcset ca {Sorry, but couldn't end the page.} {} ::msgcat::mcset ca {Sorry, but couldn't find following Results Range Table '%s'} {} ::msgcat::mcset ca {Sorry, but couldn't find the Mesh information file '%s.msh' or '-.bon' or '-.dat'. \nIf this Results file was calculated inside GiD, \ntry first loading the GiD project, \nand then use the 'Postprocess' option.} {} ::msgcat::mcset ca {Sorry, but couldn't prepare animation parameters - %s.} {} ::msgcat::mcset ca {Sorry, but couldn't send the image to the printer.} {} ::msgcat::mcset ca {Sorry, but couldn't set the bitmap on the printer.} {} ::msgcat::mcset ca {Sorry, but couldn't start the Document.} {} ::msgcat::mcset ca {Sorry, but couldn't start the Page} {} ::msgcat::mcset ca {Sorry, but couldn't use '%s' as problem directory to calculate.} {} ::msgcat::mcset ca {Sorry, but couldn't use '%s' as project directory to calculate.} {} ::msgcat::mcset ca {Sorry, but file '%s' is already in binary format.} {} ::msgcat::mcset ca {Sorry, but first a %s must be selected} {} ::msgcat::mcset ca {Sorry, but first a condition must be selected} {} ::msgcat::mcset ca {Sorry, but first a material book must be selected} {} ::msgcat::mcset ca {Sorry, but first a material must be selected} {} ::msgcat::mcset ca {Sorry, but i couldn't prepare animation parameters.} {} ::msgcat::mcset ca {Sorry, but meshes/sets can not be joined.} {} ::msgcat::mcset ca {Sorry, but no graf line could be created.} {} ::msgcat::mcset ca {Sorry, but no lines can be selected.} {} ::msgcat::mcset ca {Sorry, but number of repetitions must be > 0. Please, try again} {} ::msgcat::mcset ca {Sorry, but one of the sides is almost ZERO.} {} ::msgcat::mcset ca {Sorry, but the GiD window has been resized, so no more frames } {} ::msgcat::mcset ca {Sorry, but the point } {} ::msgcat::mcset ca {Sorry, but there are no Graphs to show.} {} ::msgcat::mcset ca {Sorry, but there are no Iso Surfaces to turn into cuts.} {} ::msgcat::mcset ca {Sorry, but there is %s entries with no image files.} {} ::msgcat::mcset ca {Sorry, but there is no Anomation File STARTed to be end.} {} ::msgcat::mcset ca {Sorry, but there is one entry with no image file.} {} ::msgcat::mcset ca {Sorry, but there was not an unique simple loop boundary selected} {} ::msgcat::mcset ca {Sorry, but too many colapsed nodes on this 4 sided set.} {} ::msgcat::mcset ca {Sorry, but too many colapsed nodes on this set: %d} {} ::msgcat::mcset ca {Sorry, can't delete first interval} {Ho sento, no es pot borrar el primer interval} ::msgcat::mcset ca {Sorry, can't extrude line %d because it is closed.} {} ::msgcat::mcset ca {Sorry, can't find especifications file. Leaving} {Ho sento, no es pot trobar el fitxer d'especificacions. Sortint} ::msgcat::mcset ca {Sorry, can't find NASTRAN file. Leaving} {} ::msgcat::mcset ca {Sorry, cannot extrude path line along itself.} {} ::msgcat::mcset ca {Sorry, cannot extrude polylines.} {} ::msgcat::mcset ca {Sorry, cannot extrude to %s.} {} ::msgcat::mcset ca {Sorry, coudln't map texture correctly.} {} ::msgcat::mcset ca {Sorry, couldn't set labels for GP. Too many of them.} {} ::msgcat::mcset ca {Sorry, no element selected.} {} ::msgcat::mcset ca {Sorry, no result selected.} {} ::msgcat::mcset ca {Sorry, no results visualization, labeling nodes instead.} {} ::msgcat::mcset ca {Sorry, no set selected.} {} ::msgcat::mcset ca {Sorry, only Thermal analysis allowed} {} ::msgcat::mcset ca {Sorry, path line cannot be a closed line.} {} ::msgcat::mcset ca {Sorry, path line cannot be closed.} {} ::msgcat::mcset ca {Sorry, path line cannot be copied along itself.} {} ::msgcat::mcset ca {Sorry, path polyline can only contain straight lines.} {} ::msgcat::mcset ca {Sorry, path polyline can only have straight lines when extruding.} {} ::msgcat::mcset ca {Sorry, Stop not available at this point} {} ::msgcat::mcset ca {Sorry, surfmesh elems and/or surfmesh nodes are not all in the project, there are some with Num()==0.} {} ::msgcat::mcset ca {Sorry, there is not enough memory to allocate temporal color table.} {} ::msgcat::mcset ca {Sorry. No mesh} {Ho sento. No hi ha malla} ::msgcat::mcset ca {Sorry. Version too old. Nothing read.} {Ho sento, versió massa antiga. Res llegit} ::msgcat::mcset ca {Sort the list of layers by name.} {} ::msgcat::mcset ca {Sort the list of sets by name.} {} ::msgcat::mcset ca {Sorting schema } {} ::msgcat::mcset ca {SpaceBall initialized. Press Right Button to do ZOOM FRAME.} {} ::msgcat::mcset ca {SpaceBall not present.} {} ::msgcat::mcset ca {SPECULAR component color} {} ::msgcat::mcset ca {spewSortedFeedback: } {} ::msgcat::mcset ca Spherical {} ::msgcat::mcset ca {Splash window} {} ::msgcat::mcset ca {Stack Trace} {} ::msgcat::mcset ca {Stack Trace for Error} {} ::msgcat::mcset ca Standard {} ::msgcat::mcset ca {Standard Bar} {} ::msgcat::mcset ca Start {} ::msgcat::mcset ca {Start remote} {} ::msgcat::mcset ca {Start Weight} {} ::msgcat::mcset ca {Starting '%s' animation in '%s'. Remember to ADD FRAMES.} {} ::msgcat::mcset ca {Starting . . .} {} ::msgcat::mcset ca StartTime {} ::msgcat::mcset ca {Static\nanalysis\nanimation\nprofile} {} ::msgcat::mcset ca Step {} ::msgcat::mcset ca Step: {} ::msgcat::mcset ca {Step: } {} ::msgcat::mcset ca Steps: {} ::msgcat::mcset ca {STL mesh read} {Llegir malla STL} ::msgcat::mcset ca StLine {} ::msgcat::mcset ca STOP {} ::msgcat::mcset ca Stop {} ::msgcat::mcset ca {Stop at:} {} ::msgcat::mcset ca {Stop requested by the user. Current operation interrupted.} {} ::msgcat::mcset ca {Stop, exceeded maximum time} {} ::msgcat::mcset ca {Stopped at user demand. Read %i elements and %i nodes.} {} ::msgcat::mcset ca {Stopped at user demand. Read %i elements and %i nodes. Leaving} {Parat per demanda d'usuari. %i elements i %i nodes llegits. Sortint} ::msgcat::mcset ca {Stopped by user when meshing surface %i} {Parat per l'usuari mentre es mallava la superfície %i} ::msgcat::mcset ca {Stopped by user when meshing volume} {} ::msgcat::mcset ca {Stopped by user when meshing volume %i} {Parat per l'usuari mentre es mallava el volum %i} ::msgcat::mcset ca {Stream labels set to 0 - End.} {} ::msgcat::mcset ca {Stream labels set to Ini - 0 - End.} {} ::msgcat::mcset ca {Stream Lines} {} ::msgcat::mcset ca {Stream Lines Detail set to %d:} {} ::msgcat::mcset ca {Stream Lines Size set to %g:} {} ::msgcat::mcset ca {Stream Lines:} {} ::msgcat::mcset ca {Streamlines color changed to #%02x%02x%02x} {} ::msgcat::mcset ca {Struct weight} {} ::msgcat::mcset ca {Structured volumes can only be hexahedra} {} ::msgcat::mcset ca Style: {} ::msgcat::mcset ca {SubMatriu incorrect size :\n\tMatriu size nrows=%d, ncols=%d\n\tsubMatriu start: row=%d, col=%d, end: row=%d, col=%d\n} {} ::msgcat::mcset ca Substitute {} ::msgcat::mcset ca Substract {} ::msgcat::mcset ca {Substracting 2D surfaces} {} ::msgcat::mcset ca {Substracting volumes} {} ::msgcat::mcset ca substraction {} ::msgcat::mcset ca Succesion Successió ::msgcat::mcset ca {Sure delete accelerator '%s'?} {} ::msgcat::mcset ca {Sure delete accelerators '%s'?} {} ::msgcat::mcset ca {Sure delete all macros?} {} ::msgcat::mcset ca {Sure delete current interval number %i?} {} ::msgcat::mcset ca {Sure delete Macro '%s'?} {} ::msgcat::mcset ca {Sure, cancel existing mesh?} {Segur que vol cancel.lar la malla existent?} ::msgcat::mcset ca {Sure, cleaning postprocess?} {} ::msgcat::mcset ca {Sure, cleaning postprocess? (y/ESC)} {} ::msgcat::mcset ca {Sure, collapse %s with ImportTolerance=%lf? \n NOTE: Each layer treats independently\n(see Preferences import)} {} ::msgcat::mcset ca {Sure, collapse %s with ImportTolerance=%lf? \n(see Preferences import)} {} ::msgcat::mcset ca {Sure, create NEW boundary elements?\n(to only view the boundary, choose Meshing->Boundaries)} {} ::msgcat::mcset ca {Sure, delete all calculation files?} {} ::msgcat::mcset ca {Sure, delete all entities of this condition? (y/ESC)} {Segur que vol borrar totes les entitats de aquesta condició? (Si/ESC)} ::msgcat::mcset ca {Sure, leaving postprocess?} {} ::msgcat::mcset ca {Sure, leaving postprocess? (y/ESC)} {} ::msgcat::mcset ca {Sure, remove lonely nodes?} {} ::msgcat::mcset ca {Sure, repair geometry?} {Segur que vol reparar la geometria?} ::msgcat::mcset ca {Sure, repair geometry? y/ESC} {Segur que vol reparar la geometria? (Si/ESC)} ::msgcat::mcset ca {Sure, unassign all %s' entities?} {} ::msgcat::mcset ca {Sure, unassign all conditions' entities?} {} ::msgcat::mcset ca {Sure, unassign all current %s's entities for this interval?} {} ::msgcat::mcset ca {Sure, unassign all materials?} {} ::msgcat::mcset ca {Sure, unassign all this condition's entities for this interval?} {} ::msgcat::mcset ca {Sure, you want to reset all meshing information?} {Segur que vol esborrar tota la informació de generació de malla?} ::msgcat::mcset ca {Sure, you want to reset all meshing information? Yes/ESC)} {} ::msgcat::mcset ca {Sure, you want to unassign all book %s?} {} ::msgcat::mcset ca {Sure, you want to unassign all conditions' entities?} {Segur que vol desassignar totes les entitats de les condicions?} ::msgcat::mcset ca {Sure, you want to unassign all conditions' entities?(Yes/ESC)} {Segur que vol desassignar totes les entitats de les condicions? (Si/ESC)} ::msgcat::mcset ca {Sure, you want to unassign all material %s?} {} ::msgcat::mcset ca {Sure, you want to unassign all materials?} {} ::msgcat::mcset ca {Sure, you want to unassign all materials? (Yes/ESC)} {Segur que vol desassignar tots els materials? (Si/ESC)} ::msgcat::mcset ca {Surf %d, t=%lf seconds, %d swaps} {} ::msgcat::mcset ca surface superficie ::msgcat::mcset ca {Surface %d doesn't exist.Try again} {} ::msgcat::mcset ca {Surface %d not exists. Try again} {} ::msgcat::mcset ca {Surface %d, created cone with size= %lf and natural boundary} {} ::msgcat::mcset ca {Surface %d, created planar with size= %lf and natural boundary} {} ::msgcat::mcset ca {Surface %d, created torus with natural boundary} {} ::msgcat::mcset ca {Surface %d, element with NULL node in line %d} {} ::msgcat::mcset ca {Surface %i can't be meshed as structured} {} ::msgcat::mcset ca {Surface %i can't be meshed. Check subdivisions in sides} {} ::msgcat::mcset ca {Surface %i cannot be structured. Bad internal definition D1} {} ::msgcat::mcset ca {Surface %i cannot be structured. Bad internal definition D2} {} ::msgcat::mcset ca {Surface %i cannot be structured. It has holes} {} ::msgcat::mcset ca {Surface %i cannot be structured. More than four angles are bigger than 10 degrees} {} ::msgcat::mcset ca {Surface %i cannot be structured. Only %i angles are bigger than 30 degrees. Four are needed} {} ::msgcat::mcset ca {Surface %i doesn't exist. Continue selecting (ESC to leave)} {Superfície %i no existeix. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {surface %i doesn't exist. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Surface %i doesn't exists.Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Surface %i is not a Coon surf, neither a NURB. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Surface %i. Quadrilaterals cannot be meshed. All contour lines must have an odd number of sides} {} ::msgcat::mcset ca {Surface divided. Can continue} {} ::msgcat::mcset ca {surface doesn't exist. You can continue (ESC to leave)} {la superfície no existeix. Pot continuar (ESC per sortir)} ::msgcat::mcset ca {Surface drawing type:} {} ::msgcat::mcset ca {Surface mesh read (from GiD or STL mesh)} {} ::msgcat::mcset ca {Surface mesher:} {} ::msgcat::mcset ca {Surface meshers can be: \n'Rfast': The most efficient in speed and reliability. With deformed surfaces can give distorted elements. \n'Rsurf': Meshes are generated directly in the space. Quality is better but it is slower and can fail for distorted surfaces. \n'2dumg': The use of this mesher is deprecated.} {} ::msgcat::mcset ca {Surface must be 4-sided or NURB. Try again} {Superfície ha de ser de quatre costats o NURBS. Intenti-ho de nou} ::msgcat::mcset ca {Surface must be a NURB. Try again} {} ::msgcat::mcset ca {Surface must be a NURBS surface} {} ::msgcat::mcset ca {surface not correct (it must be a NURBS). Try again} {} ::msgcat::mcset ca {Surface not correct. Try again} {} ::msgcat::mcset ca {surface not correct. Try again} {Superfície no correcta. Intenti-ho de nou} ::msgcat::mcset ca {Surface number %d repaired. Bad contour definition.} {} ::msgcat::mcset ca {Surface number %d repaired. In fact must be trimmed.} {} ::msgcat::mcset ca {Surface number %d repaired. Swapped orientation of %d boundary.} {} ::msgcat::mcset ca {Surface number %d repaired. The first contour must be the out boundary.} {} ::msgcat::mcset ca {Surface precision (Render) } {} ::msgcat::mcset ca {Surface rendered:} {} ::msgcat::mcset ca {Surface repaired. Bad contour definition.} {} ::msgcat::mcset ca {Surface repaired. In fact must be trimmed.} {} ::msgcat::mcset ca {Surface repaired. Swapped orientation of %d boundary.} {} ::msgcat::mcset ca {Surface repaired. The first contour must be the out boundary.} {} ::msgcat::mcset ca {Surface reparametrized. Continue picking (ESC to leave)} {} ::msgcat::mcset ca {Surface simplified. Continue picking (ESC to leave)} {} ::msgcat::mcset ca Surfaces Superfícies ::msgcat::mcset ca {Surfaces converted to NURBS surfaces. Leaving} {} ::msgcat::mcset ca {Surfaces not correct.} {Superfícies no correctes} ::msgcat::mcset ca {SURFACES\n} {} ::msgcat::mcset ca {SurfaceSet: getting information} {} ::msgcat::mcset ca {SurfaceSet: preparing set} {} ::msgcat::mcset ca {SurfMeshes changed. %i interior lines removed.} {} ::msgcat::mcset ca {SurfMeshes changed. Leaving} {superfície-malla canviada. Sortint} ::msgcat::mcset ca Swap {} ::msgcat::mcset ca {Swap all normals to the same sense?} {} ::msgcat::mcset ca {Swap all normals?} {} ::msgcat::mcset ca {Swap all normals? (y/ESC)} {} ::msgcat::mcset ca {Swapped elems: %d , remaining %d.} {} ::msgcat::mcset ca {Swapping Cut Sets Normals} {} ::msgcat::mcset ca {Swapping Surface Sets Normals} {} ::msgcat::mcset ca {Swapping Volume Sets Normals} {} ::msgcat::mcset ca Sweep {} ::msgcat::mcset ca {Switch Cut set On/Off} {} ::msgcat::mcset ca {Switch Surface set On/Off} {} ::msgcat::mcset ca {Switch to screen selection} {} ::msgcat::mcset ca {Switch to surface normal selection} {} ::msgcat::mcset ca {Switch to user point selection} {} ::msgcat::mcset ca {Switch to X-Axis movement selection} {} ::msgcat::mcset ca {Switch to Y-Axis movement selection} {} ::msgcat::mcset ca {Switch to Z-Axis movement selection} {} ::msgcat::mcset ca {Switch Volume set On/Off} {} ::msgcat::mcset ca {Switch Volume sets On/Off} {} ::msgcat::mcset ca {Switching to FAST TEXTURE mode.} {} ::msgcat::mcset ca {Switching to FLAT RENDER mode.} {} ::msgcat::mcset ca {Switching to LIT mode.} {} ::msgcat::mcset ca {Switching to NICE TEXTURE mode.} {} ::msgcat::mcset ca {Switching to NORMAL mode.} {} ::msgcat::mcset ca {Switching to OPAQUE mode.} {} ::msgcat::mcset ca {Switching to SMOOTH RENDER mode.} {} ::msgcat::mcset ca {Switching to TRANSPARENT mode.} {} ::msgcat::mcset ca {Symbols description needs global or local definition} {} ::msgcat::mcset ca {Syntax error} {} ::msgcat::mcset ca {Syntaxis: plane:a,b,c,d,r[,existing_layer]. The user must be selecting points or nodes. Try again} {Syntaxis: pl:a,b,c,d,r[,capa_existent]. L'usuari ha d'estar seleccionant punts o nodes. Intenti-ho de nou} ::msgcat::mcset ca {t must be %lf36000): $_datos($nombre,_angulo_x)} {} ::msgcat::mcset ca {The angle for the $nombre Rotation Y is too little (<-36000) or too big (>36000): $_datos($nombre,_angulo_y)} {} ::msgcat::mcset ca {The angle for the $nombre Rotation Z is too little (<-36000) or too big (>36000): $_datos($nombre,_angulo_z)} {} ::msgcat::mcset ca {The Applet %s} {} ::msgcat::mcset ca {The checking if the line is inside the surface is now active} {} ::msgcat::mcset ca {The checking if the line is inside the surface is now disabled. Be CAREFUL} {} ::msgcat::mcset ca {The Covering meshes should be showed before saving them.} {} ::msgcat::mcset ca {the file: %s is not Background Mesh} {} ::msgcat::mcset ca {The following units are not defined: %s and will not be converted during calculation. You should define it inside the problem type} {} ::msgcat::mcset ca {The interior (all) vectors should be drawn ( %s) ?} {} ::msgcat::mcset ca {The interior of Set '%s' will be drawn.} {} ::msgcat::mcset ca {The interior of Set '%s' will not be drawn.} {} ::msgcat::mcset ca {The join process will be performed over the viewed meshes/sets.} {} ::msgcat::mcset ca {The old mesh will be erased. Continue?} {} ::msgcat::mcset ca {The option 'All' redraw all the windows, 'Current' only redraw the window with the focus, and 'None' avoid the redraws (must be util to work with large models).} {} ::msgcat::mcset ca {The password for this host is valid and will expire on %d. %s %d.} {} ::msgcat::mcset ca {The possible volumes are listed next.} {} ::msgcat::mcset ca {The program finished abnormally.} {} ::msgcat::mcset ca {The same as general 'Curve precision', but applied only when rotating.} {} ::msgcat::mcset ca {The selected file is write protected} {} ::msgcat::mcset ca {The selected surfaces can form %d independent volumes} {} ::msgcat::mcset ca {The selected surfaces can form %d independent volumes, with %d holes.} {} ::msgcat::mcset ca {The server reject a secure connection.} {} ::msgcat::mcset ca {The server requires a secure connection.} {} ::msgcat::mcset ca {The Size of the Main Window exceeds the limit imposed by the Constrained Standard of MPEG-2. The Animation file can not be seen on some systems ( for instance on Microsoft Windows 95/98/NT).} {} ::msgcat::mcset ca {The surfaces are tangents.} {} ::msgcat::mcset ca {The Time for the $nombre Rotation is too little (<0) or too big (>1000): $_datos($nombre,_time)} {} ::msgcat::mcset ca {The Time for the $nombre Zoom/Pan is too little (<0) or too big (>1000): $_datos($nombre,_time)} {} ::msgcat::mcset ca {The title of the legend will now be shown.} {} ::msgcat::mcset ca {the triangle} {} ::msgcat::mcset ca {the triangle2: %d.} {} ::msgcat::mcset ca {the triangle: %d.} {} ::msgcat::mcset ca {There are %d processes comunicating with server. If you quit, you may loose some processes. Do you want to wait some seconds?} {} ::msgcat::mcset ca {There are %i local axes defined. Sure, delete ALL?} {Hi ha %i eixos locals definits. Segur que els vol borrar tots?} ::msgcat::mcset ca {There are more than 14 surfaces over one line. Can't continue} {Hi ha més de 14 superfícies sobre una línea. No es pot continuar} ::msgcat::mcset ca {There are more than one cut plane inside '%s'.} {} ::msgcat::mcset ca {There are more than one possible transformations} {Hi ha més d'una possible transformació} ::msgcat::mcset ca {There are no cut planes to save} {} ::msgcat::mcset ca {There are no cut sets} {} ::msgcat::mcset ca {There are no layers} {} ::msgcat::mcset ca {There are NO layers. First create one} {No hi ha capes. Primer cal crear-ne una} ::msgcat::mcset ca {There are no local axes defined. Leaving} {No hi ha eixos locals definits. Sortint} ::msgcat::mcset ca {There are no meshes} {} ::msgcat::mcset ca {There are no meshes of triangles, quadrilaterals, tetrahedrals or hexahedrals} {} ::msgcat::mcset ca {There are no meshes. Leaving} {No hi ha cap malla. Sortint} ::msgcat::mcset ca {There are no processes running.} {} ::msgcat::mcset ca {There are no remote processes to update} {} ::msgcat::mcset ca {There are no sets} {} ::msgcat::mcset ca {There are no surface sets} {} ::msgcat::mcset ca {There are no tables to export. Use button 'Apply' before exporting} {} ::msgcat::mcset ca {There are no volume sets} {} ::msgcat::mcset ca {There are no volume sets to delete} {} ::msgcat::mcset ca {There are not units defined} {} ::msgcat::mcset ca {There aren't results to postprocess} {} ::msgcat::mcset ca {There has been an error in the server. } {} ::msgcat::mcset ca {There is no batch file read} {} ::msgcat::mcset ca {There is no delay selected, using default of 500 ms. \n If you want no delay, please check the delay time entry.} {} ::msgcat::mcset ca {There is no elemlighting. Leaving} {} ::msgcat::mcset ca {There is no information to visualize for current project '%s'.} {} ::msgcat::mcset ca {There is no information to visualize for current project.} {} ::msgcat::mcset ca {There is no information to visualize for project '%s'.} {} ::msgcat::mcset ca {There is no layer in use} {} ::msgcat::mcset ca {There is no mesh} {} ::msgcat::mcset ca {There is no mesh to cancel} {No hi malla per cancel.lar} ::msgcat::mcset ca {There is no mesh to create its boundaries. Leaving} {} ::msgcat::mcset ca {There is no mesh to see its boundaries. Leaving} {No hi ha cap malla per veure el seu contorn. Sortint} ::msgcat::mcset ca {There is no mesh. Leaving} {} ::msgcat::mcset ca {There is no mesh/set information loaded.} {} ::msgcat::mcset ca {There is no set/cut information loaded.} {} ::msgcat::mcset ca {There is no set/cut information shown.} {} ::msgcat::mcset ca {There must be at least one value for field} {} ::msgcat::mcset ca {There was no entities to send to front} {} ::msgcat::mcset ca {There was no entities to send to front for layer %s} {} ::msgcat::mcset ca {There were only %d values left: [ Min: %g - Max: %g]:} {} ::msgcat::mcset ca {There were some problems with '%s'.} {} ::msgcat::mcset ca {There're no more next zooms.} {} ::msgcat::mcset ca {There're no more previous zooms.} {} ::msgcat::mcset ca {There's a boundary line in surface %d that is not in the project. Can't extrude it.} {} ::msgcat::mcset ca {There's a line that is not in the project.Can't extrude it.} {} ::msgcat::mcset ca {There's a point that is not in the project.Can't extrude it.} {} ::msgcat::mcset ca {There's a surface that is not in the project.Can't extrude it.} {} ::msgcat::mcset ca {These buttons are a direct access to the GiD commands} {} ::msgcat::mcset ca {These commands send all entities that have the same condition with the same data than the selected entities to layers back or the opposite.\n When an entity is in the layer back, it cannot be viewed neither selected.\n To send entities again to front, use: Bring All to front} {} ::msgcat::mcset ca {These options only work inside the PostProcess section!} {} ::msgcat::mcset ca Thickness: {} ::msgcat::mcset ca {Third point} {Tercer punt} ::msgcat::mcset ca {This %s off} {} ::msgcat::mcset ca {This button closes the window without accepting any changed value. Press 'Accept' not to loose the changed options.} {} ::msgcat::mcset ca {This button sets all the options of the active tab to its default values.} {} ::msgcat::mcset ca {This buttons is the 'Escape' button. Which finishes most commands.\nAccelerator: ESC} {} ::msgcat::mcset ca {This command create NEW boundary elements.(to only view the boundary, choose Meshing->Boundaries). Continue?} {} ::msgcat::mcset ca {This debugging function doesn't exist. Try again} {} ::msgcat::mcset ca {This direction is the normal of a plane in which a specific vector, determined by the relative position of figure and path curve, lies making the necessary rotation of the figure along this curve.} {} ::msgcat::mcset ca {This file is for ACIS %d version, this program only support until %d.\nIf you continue the resulst are unexpected\nContinue?} {} ::msgcat::mcset ca {This file is written in %d version} {} ::msgcat::mcset ca {This font is used in some dialog boxes.} {} ::msgcat::mcset ca {This font is used to draw Comments on the graphic window.} {} ::msgcat::mcset ca {This font is used to draw Labels and Dimensions on the graphic window.} {} ::msgcat::mcset ca {This font must have the same spacing for every letter. It is used in places where this property is necessary.} {} ::msgcat::mcset ca {This function is only usable in the preprocessing part} {} ::msgcat::mcset ca {This graphical window is used to test the cordal error.\nGiven a length of the line, its radius and the cordal error, it calculates approximately the number of elements that will be meshed over it.\n The length and radius can be selected from a line in the model.} {} ::msgcat::mcset ca {This is a snapshot of the model. Results will NOT be drawn over this representation.} {} ::msgcat::mcset ca {This is the ACADEMIC Version.} {} ::msgcat::mcset ca {This is the connection port. Do not change it unless your are notified that your server use another port.} {} ::msgcat::mcset ca {This is the font normally used inside GiD.} {} ::msgcat::mcset ca {This is the NETWORK PROFESSIONAL Version.} {} ::msgcat::mcset ca {This is the PROFESSIONAL Version.} {} ::msgcat::mcset ca {this is the time that program will wait for server to respond. After this time it will consider that connection has failed. Increase the time if your connection is slow.} {} ::msgcat::mcset ca {this kind of condition can only by applied to geometry} {} ::msgcat::mcset ca {This line determines where are done the copies of the figure and how it rotates according to its curvature and torsion.} {} ::msgcat::mcset ca {this line:} {} ::msgcat::mcset ca {This menu contains all contextual options that current command has.} {} ::msgcat::mcset ca {This module has no description} {} ::msgcat::mcset ca {This module has no news information} {} ::msgcat::mcset ca {This option gives the precision used to draw curves. The internal definition of curves does not change. With the dynamic button, it is possible to dynamically change the drawing of a curve to test the precision.} {} ::msgcat::mcset ca {This option gives the precision used to draw surfaces when in render mode} {} ::msgcat::mcset ca {This option only works selecting lines or surfaces.} {} ::msgcat::mcset ca {This option permmits to select one entity and retrieve its layer.} {} ::msgcat::mcset ca {This problem is already running} {} ::msgcat::mcset ca {This problem type cannot have material books} {} ::msgcat::mcset ca {This problem type cannot have materials} {} ::msgcat::mcset ca {This problem type doesn't exist or it is a project. Try again(ESC to leave)} {} ::msgcat::mcset ca {This project is new.} {} ::msgcat::mcset ca {This type of problem doesn't exist } {} ::msgcat::mcset ca {This type of problem doesn't exist or it is a project.} {} ::msgcat::mcset ca {This type of problem doesn't exist or it is a project. Enter new problem type name:} {} ::msgcat::mcset ca {This type of problem doesn't exist. } {} ::msgcat::mcset ca {This type of problem doesn't exist. Enter new problem type name:} {} ::msgcat::mcset ca {This version of %s only allows to export %i lines and there were %i. \nCheck menu Help->Register} {} ::msgcat::mcset ca {This version of %s only allows to export %i surfaces and there were %i. \nCheck menu Help->Register} {} ::msgcat::mcset ca {This version of %s only allows to generate %i surface elements and there were %i. \nCheck menu Help->Register} {} ::msgcat::mcset ca {This version of %s only allows to generate %i volume elements and there were %i. \nCheck menu Help->Register} {} ::msgcat::mcset ca {This version of GID only allows to manage %i surface elements or less} {} ::msgcat::mcset ca {This version of GID only allows to manage %i volume elements or less} {} ::msgcat::mcset ca {This version of GID only allows to read %i surface elements} {} ::msgcat::mcset ca {This version of GID only allows to read %i surface elements or less} {} ::msgcat::mcset ca {This version of GID only allows to read %i volume elements or less} {} ::msgcat::mcset ca {This will clear your current selection!} {} ::msgcat::mcset ca {This window appears again with the menu: Help->Register} {} ::msgcat::mcset ca {This window appears again with the menu: Help->Register Module} {} ::msgcat::mcset ca {This window provides some tools to create an HTML report from within GiD.\n\n} {} ::msgcat::mcset ca {Tiff file '%s' created.} {} ::msgcat::mcset ca {Tiff file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {TIFF hardcopy} {} ::msgcat::mcset ca {TIFF write} {} ::msgcat::mcset ca {Time delay must be a positive integer} {} ::msgcat::mcset ca {Time stop delay must be a positive integer} {} ::msgcat::mcset ca Timeout: {} ::msgcat::mcset ca Title {} ::msgcat::mcset ca {Title legend changed to '%s'.} {} ::msgcat::mcset ca {Title legend changed to default value.} {} ::msgcat::mcset ca {Title set to: '%s'.} {} ::msgcat::mcset ca Title: {} ::msgcat::mcset ca To {} ::msgcat::mcset ca {To 1} {} ::msgcat::mcset ca {To 2} {} ::msgcat::mcset ca {to actual mesh/set information} {} ::msgcat::mcset ca {to apply texture} {} ::msgcat::mcset ca {To back} {} ::msgcat::mcset ca {To change plane pick leftmouse or write x,y or z or number (ESC to leave)} {} ::msgcat::mcset ca {To create a polyline with search mode, only one line should be selected} {} ::msgcat::mcset ca {To created separated volume contacts, 2 surfaces are necessary. Leaving} {Per crear contactes de volum separats, són necessàries 2 superfícies. Sortint} ::msgcat::mcset ca {To disable this warning set: Utilities->Preferences->Use more windows->Yes} {} ::msgcat::mcset ca {To draw or not to draw this type of entity when rotating.} {} ::msgcat::mcset ca {To draw vectors the } {} ::msgcat::mcset ca {To enable Undo set on 'Write Batch file' in preferences window} {} ::msgcat::mcset ca {to end with cuads.} {} ::msgcat::mcset ca {to end with lines.} {} ::msgcat::mcset ca {to end with nodes.} {} ::msgcat::mcset ca {to end with triangs.} {} ::msgcat::mcset ca {To File} {} ::msgcat::mcset ca {To get a distance, cursor must be into one of the scalars} {} ::msgcat::mcset ca {To get a vector, cursor must be into one of the vectors} {} ::msgcat::mcset ca {To make a mirror, number of repetitions must be 1. Try again} {} ::msgcat::mcset ca {to make tetras.} {} ::msgcat::mcset ca {to make the cut.} {} ::msgcat::mcset ca {to make the exact division.} {} ::msgcat::mcset ca {To Printer} {} ::msgcat::mcset ca {To rename one layer select it and write a new name before pressing the button} {} ::msgcat::mcset ca {To run GID it is necessary to set the environment variable: GIDDEFAULT to the path of the executables} {} ::msgcat::mcset ca {To S} {} ::msgcat::mcset ca {To see all mesh use this function again} {Per veure tota la malla usi aquesta funció de nou} ::msgcat::mcset ca {To see volume mesh boundaries use command: meshing->Boundaries} {} ::msgcat::mcset ca {to select cuts.} {} ::msgcat::mcset ca {to select mallas.} {} ::msgcat::mcset ca {to select meshes.} {} ::msgcat::mcset ca {to select sets.} {} ::msgcat::mcset ca {To show again this window use:} {} ::msgcat::mcset ca {to store } {} ::msgcat::mcset ca {to store analysis.} {} ::msgcat::mcset ca {to store cuads.} {} ::msgcat::mcset ca {to store cubes.} {} ::msgcat::mcset ca {to store cubes.2..} {} ::msgcat::mcset ca {to store cuts.} {} ::msgcat::mcset ca {to store cuts.2.} {} ::msgcat::mcset ca {to store elements.} {} ::msgcat::mcset ca {to store lines} {} ::msgcat::mcset ca {to store lines.} {} ::msgcat::mcset ca {to store plane cuts.} {} ::msgcat::mcset ca {to store plane cuts.2.} {} ::msgcat::mcset ca {to store points.} {} ::msgcat::mcset ca {to store tetraedras.} {} ::msgcat::mcset ca {to store tetras.} {} ::msgcat::mcset ca {to store texture mesh.} {} ::msgcat::mcset ca {to store the cut.} {} ::msgcat::mcset ca {to store the line.} {} ::msgcat::mcset ca {to store the mesh.} {} ::msgcat::mcset ca {to store triangles.} {} ::msgcat::mcset ca {to store triangs.} {} ::msgcat::mcset ca {to the triangle} {} ::msgcat::mcset ca {To update later, use the button 'Remote' in the Calculate window.} {} ::msgcat::mcset ca {To use tangents 2 or more points are needed} {Per usar tangents 2 o més punts són necessaris} ::msgcat::mcset ca {to work on cuads.} {} ::msgcat::mcset ca {to work on lines.} {} ::msgcat::mcset ca {to work on lines.2.} {} ::msgcat::mcset ca {to work on lines.3.} {} ::msgcat::mcset ca {to work on nodes.} {} ::msgcat::mcset ca {to work on triangs.} {} ::msgcat::mcset ca {Toggle between pre and postprocess} {} ::msgcat::mcset ca {Togl_Print: No SetPixelFormat.} {} ::msgcat::mcset ca {Togl_Print: No StartDoc.} {} ::msgcat::mcset ca {Togl_Print: No SwapBuffers.} {} ::msgcat::mcset ca {Togl_Print: No wglCopyContext.} {} ::msgcat::mcset ca {Togl_Print: No wglCreateContext.} {} ::msgcat::mcset ca {Togl_Print: No wglMakeCurrent.} {} ::msgcat::mcset ca {Togl_Print: No wglShareLists.} {} ::msgcat::mcset ca {Tolerance angle to select by tangents set to %lf degrees} {} ::msgcat::mcset ca {Tolerance too small, collapse use Tolerance=1.e-8} {} ::msgcat::mcset ca {Tolerance too small, Parasolid read use Tolerance=1.e-8} {} ::msgcat::mcset ca {Tolerance too small, used Tolerance=1.e-8} {} ::msgcat::mcset ca {Tolerance too small, VDA read use Tolerance=1.e-8} {} ::msgcat::mcset ca {Too few gauss points results for element %d, %d out of %d } {} ::msgcat::mcset ca {Too few numbers } {} ::msgcat::mcset ca {Too few parameters} {} ::msgcat::mcset ca {Too many parameters} {} ::msgcat::mcset ca {Too many points to define Graf: %d.} {} ::msgcat::mcset ca {Too many results, max. %d} {} ::msgcat::mcset ca {Too many variables in this ZONE record} {} ::msgcat::mcset ca {Too much nodes around ( %le, %le, %le )} {} ::msgcat::mcset ca {Toolbars position} {} ::msgcat::mcset ca Top: {} ::msgcat::mcset ca {Topological rectangle with %d holes.} {} ::msgcat::mcset ca {Topological sphere.} {} ::msgcat::mcset ca {Topological torus.} {} ::msgcat::mcset ca {Total area=%lg} {} ::msgcat::mcset ca {Total GenMesh Time=%lf seconds} {} ::msgcat::mcset ca {Total Length=%lg} {} ::msgcat::mcset ca {Total length=%lg} {} ::msgcat::mcset ca {Total size: %dKb} {} ::msgcat::mcset ca {Total size: 200Kb} {} ::msgcat::mcset ca {Total time:} {} ::msgcat::mcset ca {Total Volume=%lg} {} ::msgcat::mcset ca {Total volume=%lg} {} ::msgcat::mcset ca Transfer {} ::msgcat::mcset ca {Transferred to client '%s' ... } {} ::msgcat::mcset ca {Transferred to server '%s' ... } {} ::msgcat::mcset ca {Transferring files} {} ::msgcat::mcset ca {Transferring to client '%s' ... %s%% of %s KB} {} ::msgcat::mcset ca {Transferring to client '%s' ... 0%% of %s KB} {} ::msgcat::mcset ca {Transferring to server '%s' ... %s%% of %s KB} {} ::msgcat::mcset ca {Transferring to server '%s' ... 0%% of %s KB} {} ::msgcat::mcset ca Transform {} ::msgcat::mcset ca {Transform to new problemtype} {} ::msgcat::mcset ca Transformation Tranformació ::msgcat::mcset ca {Transformation type} {} ::msgcat::mcset ca Transformations {} ::msgcat::mcset ca {Transformations are not used for drawing.} {} ::msgcat::mcset ca {Transformations are only for viewing purposes, i.e. not create.} {} ::msgcat::mcset ca {Transformations are used for drawing.} {} ::msgcat::mcset ca {Transformations will extrude the sets, i.e. create volumes or surfaces.} {} ::msgcat::mcset ca Transforming {} ::msgcat::mcset ca Translation Translació ::msgcat::mcset ca Transparency {} ::msgcat::mcset ca Transparent {} ::msgcat::mcset ca Triangle Triangle ::msgcat::mcset ca {triangles %d, %d, line %d} {} ::msgcat::mcset ca {triangles %d, %d.} {} ::msgcat::mcset ca {triangles2 %d, %d.} {} ::msgcat::mcset ca {Trim Lines} {} ::msgcat::mcset ca {Try again} {Intenti-ho de nou} ::msgcat::mcset ca {Try choosing an analisis} {} ::msgcat::mcset ca {Try choosing loading some results} {} ::msgcat::mcset ca {Try later} {} ::msgcat::mcset ca {Trying to select too many lines.} {Està intentant seleccionar masses línees.} ::msgcat::mcset ca {Trying to write batchfile in same file than reading} {Intentant escriure el fitxer de comandes en el mateix fitxer del que es llegeix} ::msgcat::mcset ca {Trying to write in same file than reading} {Intentant escriure en el mateix fitxer del que es llegeix} ::msgcat::mcset ca {Twist mode} {} ::msgcat::mcset ca {Twist mode determines how figure rotates along the curve: \n NaturalTwist makes rotate the figure according to its curvature and torsion. \n XY, XZ and YZ correct the rotation occasioned by torsion, rotating the figure to mantain certain vector in the orthogonal plane of corresponding axis ( z, y or x, respectively). \n UserDirection allows user introduce directly the vector of the orthogonal plane when it is different from z, y or x axis. \n ByDer2 option corrects the rotation occasioned by torsion using the second derivate of the path curve.} {} ::msgcat::mcset ca {Twist modes} {} ::msgcat::mcset ca {Twist options} {} ::msgcat::mcset ca {Two colors scale:} {} ::msgcat::mcset ca {Two corners selection mode: Click on where the UPPER LEFT corner of the image should be.} {} ::msgcat::mcset ca {Two dimensions} {Dos dimensions} ::msgcat::mcset ca Type {} ::msgcat::mcset ca {Type of element} {} ::msgcat::mcset ca Type: {} ::msgcat::mcset ca {Type: %1\$s in magnitude $magname is already defined} {} ::msgcat::mcset ca {Type: %1\$s in magnitude %2\$s is already defined} {} ::msgcat::mcset ca {Typically, it is the meshing size that will be used later as default for meshing.} {} ::msgcat::mcset ca {u must be %lf NumPoints} {} ::msgcat::mcset ca {weights list cancelled. They cannot by used in interpolated curves} {} ::msgcat::mcset ca {What do you want to write on the FIRST comment line?} {} ::msgcat::mcset ca {What do you want to write on the SECOND comment line?} {} ::msgcat::mcset ca {What do you want to write on the THIRD comment line?} {} ::msgcat::mcset ca {What is a '%d' element.} {} ::msgcat::mcset ca {What is new} {} ::msgcat::mcset ca {What type of culling should I use ( } {} ::msgcat::mcset ca {When 'Fast rotation' is set, drawing will be faster for both the geometry and the mesh when rotating the model. The way of increasing speed depends on the options.} {} ::msgcat::mcset ca {When importing a file or collapsing, the points closer than this distance are considered to be unique. Lines and surfaces can also be collapsed.} {} ::msgcat::mcset ca {when querying cuts info.} {} ::msgcat::mcset ca {when querying sets info.} {} ::msgcat::mcset ca {when querying volume sets info.} {} ::msgcat::mcset ca {when they already are for volume meshes?} {} ::msgcat::mcset ca {Where should the paralel plane lie.} {} ::msgcat::mcset ca {Which color should contour fill use for results lower than the Minimum [ } {} ::msgcat::mcset ca {Which color should contour fill use for results upper than the Maximum [ } {} ::msgcat::mcset ca {Which conditions do you want to see?} {} ::msgcat::mcset ca {Which contour limits should I use to paint the results for this Step ( ShownSets / AllSets) [ AllSets]:} {} ::msgcat::mcset ca {Which elevations of the line diagrams should I show?} {} ::msgcat::mcset ca {Which level of detail should I use to draw the vectors ( } {} ::msgcat::mcset ca {Which number may I start with?} {} ::msgcat::mcset ca {Which style should I use for the new Graphs?} {} ::msgcat::mcset ca {Which style should I use for this Graph?} {} ::msgcat::mcset ca {Which type of smoothing do you want to use for the Smooth Contour Fill ( } {} ::msgcat::mcset ca {Which value do you want to use as Maximum for Contours?} {} ::msgcat::mcset ca {Which value do you want to use as Minimum for Contours?} {} ::msgcat::mcset ca {while deforming cuts.} {} ::msgcat::mcset ca {while deforming cuts.1.} {} ::msgcat::mcset ca {while deforming cuts.2.} {} ::msgcat::mcset ca {while deforming mesh.} {} ::msgcat::mcset ca {while deforming mesh.1.} {} ::msgcat::mcset ca {while deforming mesh.2.} {} ::msgcat::mcset ca {while restoring cuts.} {} ::msgcat::mcset ca {while restoring mesh.} {} ::msgcat::mcset ca {Whole line} {} ::msgcat::mcset ca {Width Intervals} {} ::msgcat::mcset ca {Width Margin changed to %g inches.} {} ::msgcat::mcset ca {Width of intervals fixed to %g.} {} ::msgcat::mcset ca {Width of Intervals:} {} ::msgcat::mcset ca Width: {} ::msgcat::mcset ca {Window id not valid.} {} ::msgcat::mcset ca {Window too little to render in High Resolution.} {} ::msgcat::mcset ca {With this button, changed values of the active tab are accepted. If this button is not pressed, values changed by the user are not computed.} {} ::msgcat::mcset ca {Word '%s' in filter is unknown. } {} ::msgcat::mcset ca {Word must begin with a letter} {} ::msgcat::mcset ca Working... {} ::msgcat::mcset ca {Wrapping surface: %d ( %d) triangles and %d points: %g + %g + %g = %gs..} {} ::msgcat::mcset ca {Wrapping surface: %d triangles and %d points.} {} ::msgcat::mcset ca Write {} ::msgcat::mcset ca {write batch} {} ::msgcat::mcset ca {write batch file} {} ::msgcat::mcset ca {Write batch file:} {} ::msgcat::mcset ca {Write calculation file} {} ::msgcat::mcset ca {Write description} {} ::msgcat::mcset ca {Write Graph} {} ::msgcat::mcset ca {Write macros file} {} ::msgcat::mcset ca {Write output file} {} ::msgcat::mcset ca {Write rot in batch} {} ::msgcat::mcset ca Write.. {} ::msgcat::mcset ca {Writing '%s' . . .} {} ::msgcat::mcset ca {Writing '%s' Postprocess binary file } {} ::msgcat::mcset ca {Writing binary post-process file stopped by user request.} {} ::msgcat::mcset ca {Writing DXF} {} ::msgcat::mcset ca {Writing GIF: reducing colors number to a maximum of 256, pass %d.} {} ::msgcat::mcset ca {Writing IGES} {} ::msgcat::mcset ca {Wrong analisis '%s' } {} ::msgcat::mcset ca {Wrong arg in info gendata: should be [OTHERFIELDS|BOOKS]} {} ::msgcat::mcset ca {Wrong arg. Must be PRE, POST or PREPOST.} {} ::msgcat::mcset ca {Wrong arg. Must be replace or insert.} {} ::msgcat::mcset ca {Wrong arguments, should be %s %s %s %s analisis_name step_value result_name indexes} {} ::msgcat::mcset ca {Wrong height, at least must be 1.} {} ::msgcat::mcset ca {Wrong number} {} ::msgcat::mcset ca {Wrong number of arguments %d, instead of %d in '%s'%s%s%s%s%s} {} ::msgcat::mcset ca {Wrong number of arguments, should be: %s [ -v] file_in [ file2_out_base_name]} {} ::msgcat::mcset ca {Wrong number of copies} {} ::msgcat::mcset ca {Wrong number of elements} {} ::msgcat::mcset ca {Wrong number of final points} {} ::msgcat::mcset ca {Wrong number of points} {} ::msgcat::mcset ca {Wrong parameters} {} ::msgcat::mcset ca {Wrong result name '%s' } {} ::msgcat::mcset ca {Wrong step value '%g' } {} ::msgcat::mcset ca {Wrong value, at least must be 1.} {} ::msgcat::mcset ca {wrong volumes} {} ::msgcat::mcset ca {Wrong width, at least must be 1.} {} ::msgcat::mcset ca {X axis} {} ::msgcat::mcset ca {X axis - Against what should I do the graf?} {} ::msgcat::mcset ca {X variation} {} ::msgcat::mcset ca X-Axis {} ::msgcat::mcset ca XY {} ::msgcat::mcset ca XZ {} ::msgcat::mcset ca {Y axis} {} ::msgcat::mcset ca {Y axis - Enter variable name} {} ::msgcat::mcset ca {Y variation} {} ::msgcat::mcset ca Y-Axis {} ::msgcat::mcset ca Yes Si ::msgcat::mcset ca {Yes, I know} {} ::msgcat::mcset ca {You are going to load problemtype '$projecttype'.\nWhat do you want to do?} {} ::msgcat::mcset ca {You have to define at least one scene} {} ::msgcat::mcset ca {{Color} {Grey} {Cancel}} {} ::msgcat::mcset ca {{Dot} {Line} {DotLine} {Cancel}} {} ::msgcat::mcset ca {{Erase old mesh} {Add No Share} {Add Share} {Cancel}} {} ::msgcat::mcset ca {{Erase old mesh} {Add No Share} {Cancel}} {} ::msgcat::mcset ca {{Geometry} {Mesh} {None} {Cancel}} {} ::msgcat::mcset ca {{Landscape} {Portrait} {Cancel}} {} ::msgcat::mcset ca {{Lines} {Surfaces} {Cancel}} {} ::msgcat::mcset ca {{Lines} {Surfaces} {Volumes} {Cancel}} {} ::msgcat::mcset ca {{MPEG} {AVI} {AVI15} {AVIMJPG} {GIF} {Cancel}} {} ::msgcat::mcset ca {{New set} {Old set} {Cancel}} {} ::msgcat::mcset ca {{Nodes} {Elements} {Cancel}} {} ::msgcat::mcset ca {{None} {0End} {IniEnd} {Cancel}} {} ::msgcat::mcset ca {{None} {Default} {Dot} {Line} {DotLine} {Cancel}} {} ::msgcat::mcset ca {{NumDivisions} {Point} {Parameter} {Cancel}} {} ::msgcat::mcset ca {{NumDivisions} {Point} {Parameter} {RelativeLength} {PolyLine} {Cancel}} {} ::msgcat::mcset ca {{One} {All} {Cancel}} {} ::msgcat::mcset ca {{Points} {Lines} {2Triangles} {4Triangles} {8Triangles} {Cancel}} {} ::msgcat::mcset ca {{UsePoints} {NoUsePoints} {OnlyPoints} {Cancel}} {} ::msgcat::mcset ca {{Vertex} {Distance} {Angle} {Radius} {Text} {Cancel}} {} ::msgcat::mcset ca {{WholeLine} {NodesOnly} {FilledLine} {ContFillLine} {None} {Cancel}} {} ::msgcat::mcset ca {{Yes} {No}} {} ::msgcat::mcset ca {{Yes} {No} {Cancel}} {} ::msgcat::mcset ca {{Yes} {No} {Cancel} } {} ::msgcat::mcset ca {{Yes} {No} {Extrude} {Cancel}} {} ::msgcat::mcset ca {{{Materials} {.mat}}} {} ::msgcat::mcset ca {{{{Materials} {.mat}}}} {} ::msgcat::mcset ca {Read parameters=%d seconds} {} ::msgcat::mcset ca {Create geometry=%d seconds} {} ::msgcat::mcset ca {Warning, names must be identical: BEGINSET:%s ENDSET:%s} {} ::msgcat::mcset ca {Warning: unsupported entity: %s} {} ::msgcat::mcset ca {Warning: VDA entity type %d without name.} {} ::msgcat::mcset ca {Warning: VDA too long entity name=%s.} {} ::msgcat::mcset ca {WARNING: surface number %i has bad definitionand couldn't be fixed. You should erase it} {} ::msgcat::mcset ca {WARNING: surface number %i has normal module 0.0 and couldn't be fixed. You should erase it} {} ::msgcat::mcset ca {but now, using these limits: Min = %.5g, Max = %.5g.} {} ::msgcat::mcset ca {should be one of: Scalar, Vector, Matrix, PlainDeformationMatrix, MainMatrix, LocalAxes; } {} ::msgcat::mcset ca {should be one of: OnNodes, OnGaussPoints;} {} ::msgcat::mcset ca {should be one of: Scalar, Vector, Matrix, } {} ::msgcat::mcset ca {Select GiD installation directory where the password is installed} {} ::msgcat::mcset ca {Select GiD problemtype.gid directory where the password is installed} {} ::msgcat::mcset ca {Error: You must select the directory containing one installed GiD} {} ::msgcat::mcset ca {Could not find a valid password in this GiD} {} ::msgcat::mcset ca {Error: You must select the directory containing the problemtype.gid} {} ::msgcat::mcset ca {Could not find a valid password in this problemtype} {} ::msgcat::mcset ca {Use this button to copy the password from previously installed programs} {} ::msgcat::mcset ca {Copy point coords} {} ::msgcat::mcset ca {Warning, Automatic collapse preference is unselected.} {} ::msgcat::mcset ca {(Must be necessary collapse and repair the geometry)} {} ::msgcat::mcset ca {Unknown bspline surface} {} ::msgcat::mcset ca {ACIS_SatFile::read_pointer, character '$' expected} {} ::msgcat::mcset ca {ACIS Entity not APOINT} {} ::msgcat::mcset ca {restore_common, Terminator record expected} {} ::msgcat::mcset ca {ACIS Surface type unsupported} {} ::msgcat::mcset ca {ACIS Line type unsupported} {} ::msgcat::mcset ca {ACIS_EXP_PAR_CUR::CreateLineGID::TO BE CONTINUED} {} ::msgcat::mcset ca {ACIS_INT_CUR::CreateLineGID: m_bs2_Curve or surface==NULL} {} ::msgcat::mcset ca {ACIS_SPL_SUR::CreateLineGID: m_bs3_Surface==NULL} {} ::msgcat::mcset ca {ACIS_BLEND_SPL_SUR::restore_data. blendsuppnt unsupported.} {} ::msgcat::mcset ca {Internal error in calculator} {} ::msgcat::mcset ca {Error: opening parentheses without operation} {} ::msgcat::mcset ca {Error: void parentheses} {} ::msgcat::mcset ca {Error: separator ',' with void previous argument} {} ::msgcat::mcset ca {Error: can't make asignement or negation} {} ::msgcat::mcset ca {Error: after function are necessary parentheses} {} ::msgcat::mcset ca {Error in operation::operation. can't get anything} {} ::msgcat::mcset ca {Error: two numbers or vars without sign in the middle} {} ::msgcat::mcset ca {Error: two contiguous operations} {} ::msgcat::mcset ca {Error: one parentheses not closed} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. Not #LA#} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. Not ( parenthesis} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. there is a blank option} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. there are more than 3 options} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. there is no ) parenthesis} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. more than three fields} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. two globals} {} ::msgcat::mcset ca {Error in Cond::ParserLocalAxes. two automatics_alt} {} ::msgcat::mcset ca {Error in Cond::EnterQuestionsAnswers. num=0} {} ::msgcat::mcset ca {Error in Cond::CopyEntities. !=NumProVal} {} ::msgcat::mcset ca {Error in Cond::SwapEntities. !=NumProVal} {} ::msgcat::mcset ca {Error in Cond::SwapEntities. !=TypeOfCond} {} ::msgcat::mcset ca {Error in Cond::SwapEntities. !=TypeOfMeshCond} {} ::msgcat::mcset ca {Error in Cond::SwapEntities. !=HasLocalAxes} {} ::msgcat::mcset ca {Error in Cond::SwapEntities. !=CanRepeat} {} ::msgcat::mcset ca {Error inCond::writeCondToDB. No type of condition} {} ::msgcat::mcset ca {Error: file CONDMESHTYPE: can be 'over nodes' or 'over body elements' or 'over face elements'} {} ::msgcat::mcset ca {Error: field CANREPEAT: can be 'yes' or 'no'} {} ::msgcat::mcset ca {Error: while reading CONDITION} {} ::msgcat::mcset ca {Error: while reading CONDITION. Some value not defined} {} ::msgcat::mcset ca {Error in Cond::readEntitiesFromdDB. Nnode!=2} {} ::msgcat::mcset ca {Error in Cond::readEntitiesFromdDB. Increase buf} {} ::msgcat::mcset ca {Error in Cond::DrawEnt. Unknown type} {} ::msgcat::mcset ca {Error in Cond::DrawEnt. FieldNum too big} {} ::msgcat::mcset ca {Error in Project::CondToMeshFromGeom. Can't set automaticlocal axes for condition over nodes} {} ::msgcat::mcset ca {Error in SetUpBoundariesForFig -2-} {} ::msgcat::mcset ca {Error in SetUpBoundariesForFig} {} ::msgcat::mcset ca {Error in Cond::DrawEnt. Cond::ReassignCondFlag} {} ::msgcat::mcset ca {Error in Cond::TakeOutErasedFigures} {} ::msgcat::mcset ca {Error in Cond::ChangeFigure} {} ::msgcat::mcset ca {Error in Cond::CopyCondInFigures} {} ::msgcat::mcset ca {Error in Cond::CountDifferentFields} {} ::msgcat::mcset ca {Error in Materials::Materials. Too few words} {} ::msgcat::mcset ca {Error in Materials::EnterQuestionsAnswers. num=0} {} ::msgcat::mcset ca {Error: while reading MATERIAL} {} ::msgcat::mcset ca {Error: while reading MATERIAL. Some value not defined} {} ::msgcat::mcset ca {GenData needs, at least, 1 argument} {} ::msgcat::mcset ca {Error in general data. Trying to use a number higher than defined} {} ::msgcat::mcset ca {Error: GenData value too long} {} ::msgcat::mcset ca {Error in general data. Trying to use a subField higher than defined} {} ::msgcat::mcset ca { doesn't exist} {} ::msgcat::mcset ca {Error in CondSimbols::draw. Prisma not implemented} {} ::msgcat::mcset ca {Error in ContactSurface::writeToDB lenghs not equal to 3} {} ::msgcat::mcset ca {Error in ContactVolume::writeToDB lengh not equal to 3} {} ::msgcat::mcset ca {Error in ContactVolume::GenMeshInYourSurfs. No line} {} ::msgcat::mcset ca {Error in ContactVolume::GenMeshInYourSurfs. No node} {} ::msgcat::mcset ca {Error in Volume::CalcCenter. NumPoints=0} {} ::msgcat::mcset ca {Unsupported quadratic prisma} {} ::msgcat::mcset ca {Cannot extrude volume elements from line elements} {} ::msgcat::mcset ca {Error in SetGeom::CreateNURBLine. Increase MAXPNTINNURB} {} ::msgcat::mcset ca {Error in AreTangentsInLine. Type of surface unexpected} {} ::msgcat::mcset ca {Error in SetGeom::ConvertToNurbSurfaces. Unknown type} {} ::msgcat::mcset ca {Problems initializing SpaceBall} {} ::msgcat::mcset ca {Initializing sequence sent.} {} ::msgcat::mcset ca {Error in SetGeom::CreateDimension. Unknown type} {} ::msgcat::mcset ca {Warning, Automatic collapse preference is unselected.\n(Must be necessary collapse and repair the geometry)} {} ::msgcat::mcset ca {Warning: this model contain not implemented 3DSOLID entities} {} ::msgcat::mcset ca {WARNING: repeated elements number in mesh} {} ::msgcat::mcset ca {Not implemented quadratic prism} {} ::msgcat::mcset ca {Error, element not read, bad number} {} ::msgcat::mcset ca {Error in Line::GenMesh. Polyline} {} ::msgcat::mcset ca {Error in ArcLine::Move_old. Couldn't create arc} {} ::msgcat::mcset ca {Error in ArcLine::Transform. Couldn't create arc} {} ::msgcat::mcset ca {Error: trying to enter too many lines in PolyLine::AddLines} {} ::msgcat::mcset ca {Error in PolyLine::readFromdDB. reading zero} {} ::msgcat::mcset ca {Error in PolyLine::readASCIIFromdDB. Splines not allowed} {} ::msgcat::mcset ca {Error in PolyLine::readASCIIFromdDB. reading zero} {} ::msgcat::mcset ca {Error in PolyLine::GiveDerCoord} {} ::msgcat::mcset ca {Error in PolyLine::GiveDer2Coord} {} ::msgcat::mcset ca {Error in PolyLine::AddLineToTransferMesh. No line} {} ::msgcat::mcset ca {Error in Surface::ToBreak, Surface type unexpected} {} ::msgcat::mcset ca {Error in Surface::ToBreak, type in NurbSurface unexpected} {} ::msgcat::mcset ca {Error in Surface::GiveAngle} {} ::msgcat::mcset ca {ClassifyCutContour::Type of surface unexpected} {} ::msgcat::mcset ca {Error: environment variable GIDDEFAULT must be set} {} ::msgcat::mcset ca {Error in CoonSurface::EnterItsPolyline. Bad line} {} ::msgcat::mcset ca {Error in WriteAndRead2DUMG} {} ::msgcat::mcset ca {Error in WriteAndRead2DUMG (2)} {} ::msgcat::mcset ca {Error in InfoCb. Layers buf exceeded} {} ::msgcat::mcset ca {Error in ActionsMenu::EnterTmpNamesWin. Increase dim} {} ::msgcat::mcset ca {Error in CreateInfoWin. Unknown type} {} ::msgcat::mcset ca {Error in WinGl::EnterDrawObject. Increase num of DrawObjects} {} ::msgcat::mcset ca {Error in WinGl::Label. Bad selection} {} ::msgcat::mcset ca {Error in Elem::drawpol 1} {} ::msgcat::mcset ca {IGES_114::GiveCoord not implemented} {} ::msgcat::mcset ca {IGES_114::GiveNormalCC not implemented} {} ::msgcat::mcset ca {IGES_118::GiveCoord not implemented} {} ::msgcat::mcset ca {IGES_118::GiveNormalCC not implemented} {} ::msgcat::mcset ca {IGES_120::GiveCoord not implemented} {} ::msgcat::mcset ca {IGES_120::GiveNormalCC not implemented} {} ::msgcat::mcset ca {Can't fill with %lf a zero size Matriu} {} ::msgcat::mcset ca {Can't divide by %lf a zero size Matriu} {} ::msgcat::mcset ca {Can't construct an identity Matriu of size %d} {} ::msgcat::mcset ca {Can't compute the crout decomposition of a rectangular Matriu} {} ::msgcat::mcset ca {Error, coordinate system not defined} {} ::msgcat::mcset ca {Error in NurbLine::CreateTmpInterpolated. numpnts<2} {} ::msgcat::mcset ca {NurbSurface::PointIsInside, fail GiveLinesLoops, return false} {} ::msgcat::mcset ca {Error in NurbSurface::writeToAscii lenghs not equal to 3} {} ::msgcat::mcset ca {Unknown mesher} {} ::msgcat::mcset ca {Error in NurbSurface::EnterNewWeight. Pos too big} {} ::msgcat::mcset ca {Error in NurbSurface::GiveAproxParameterlength} {} ::msgcat::mcset ca {Unexpected gridding medhod. Used Inverse Distance to power} {} ::msgcat::mcset ca {Renumber: Qsort Time=%lf seconds} {} ::msgcat::mcset ca {Renumber: Neighbords & BandWidth Time=%lf seconds} {} ::msgcat::mcset ca {Renumber: Level struct Time=%lf seconds} {} ::msgcat::mcset ca {Renumber: Compute BandWidth Time=%lf seconds} {} ::msgcat::mcset ca {Renumber: Renumber Time=%lf seconds} {} ::msgcat::mcset ca {Previous bandwith=%li, new=%li} {} ::msgcat::mcset ca {Previous skyline size=%li, new=%li} {} ::msgcat::mcset ca {Metis: Time=%lf seconds} {} ::msgcat::mcset ca {Renumber Total Time=%lf seconds} {} ::msgcat::mcset ca {Error in Project::GiveDist. Unknown type} {} ::msgcat::mcset ca {Problems in division, Original surface %d not deleted} {} ::msgcat::mcset ca {Intersect lines, Time=%d seconds} {} ::msgcat::mcset ca {Warning, %d near elems with opposite normals:} {} ::msgcat::mcset ca {Repaired, %d quadratic elements with negative volume:} {} ::msgcat::mcset ca {Fixed %i tobemeshed flags in MeshDataTable} {} ::msgcat::mcset ca {Polyline %i have LinesToTransferMesh in level 2} {} ::msgcat::mcset ca {surface number %i; old Higher Entity=%i,new=%i} {} ::msgcat::mcset ca {surface number %i; repeared polyline number %i} {} ::msgcat::mcset ca {WARNING: surface %i has a line at level 2. Fix it by hand} {} ::msgcat::mcset ca {line number %i; old Higher Entity=%i,new=%i} {} ::msgcat::mcset ca {WARNING: Polyline number %i is not correct. It should be erased. Code=%i} {} ::msgcat::mcset ca {point number %i; old Higher Entity=%i,new=%i} {} ::msgcat::mcset ca {NURB inside polyline %i repaired. Defined with few points.} {} ::msgcat::mcset ca {NURB line pos=%i inside polyline number %i repaired. Bad internal definition.} {} ::msgcat::mcset ca {WARNING: line pos=%i inside polyline number %i has bad definition and couldn't be fixed.You should erase it} {} ::msgcat::mcset ca {NURB inside polyline %i level 2 repaired.Defined with few points.} {} ::msgcat::mcset ca {NURB line level 2 inside polyline number %i repaired. Bad internal definition.} {} ::msgcat::mcset ca {WARNING: %d line level 2 inside polyline number %i has bad definition and couldn't be fixed. You should erase it} {} ::msgcat::mcset ca {WARNING: Line number %i has bad definition and couldn't be fixed.You should erase it} {} ::msgcat::mcset ca {surface number %i; Cut natural domain} {} ::msgcat::mcset ca {Surface %d whitout contour lines must be deleted} {} ::msgcat::mcset ca {Surface %d is really untrimmed} {} ::msgcat::mcset ca {NURB surface number %i improved.} {} ::msgcat::mcset ca {surface number %i; had normal module %lf Has been fixed} {} ::msgcat::mcset ca {WARNING, volume number %d have repeated boundary %d and %d} {} ::msgcat::mcset ca {%s number %i; old condition flag=%i,new=%i} {} ::msgcat::mcset ca {Error in Project::Repair. Increase CondFlag[20]} {} ::msgcat::mcset ca {Node number %i; old condition flag=%i,new=%i} {} ::msgcat::mcset ca {Element number %i; old condition flag=%i,new=%i} {} ::msgcat::mcset ca {WARNING: It's necessary to renumber mesh elements} {} ::msgcat::mcset ca {WARNING: %d figures without layer are send to %s} {} ::msgcat::mcset ca {Error in SetGeom::GiveLinesAroundPoint. Too many lines} {} ::msgcat::mcset ca {In Polysurface: %i desired size=%f} {} ::msgcat::mcset ca {Number of warnings in minimum size: %i} {} ::msgcat::mcset ca {There has been %i warnings} {} ::msgcat::mcset ca {Deleted node: %i %lf %lf %lf} {} ::msgcat::mcset ca {Deleted %i nodes. They didn't belong to any element} {} ::msgcat::mcset ca {Error, bad type in int PrintAny} {} ::msgcat::mcset ca {Unexpected Part Type=%d in INSTANCE %d} {} ::msgcat::mcset ca {Warning: FACE_s,Index=%d. Created NULL Surface} {} ::msgcat::mcset ca {Warning: BODY_s,Index=%d. Not close volume} {} ::msgcat::mcset ca {Warning: EDGE_s,Index=%d. Created NULL Line} {} ::msgcat::mcset ca {Warning: isolated loop, FIN_S Index=%d.} {} ::msgcat::mcset ca {Warning: Node EDGE_s,Index=%d. NULL curve and tolerance} {} ::msgcat::mcset ca {Warning: Node EDGE_s,Index=%d. NULL curve} {} ::msgcat::mcset ca {Warning: Node EDGE_s,Index=%d. NULL Vertex} {} ::msgcat::mcset ca {Warning: Node EDGE_s,Index=%d. NULL points and not TRIMMED_CURVE or closed} {} ::msgcat::mcset ca {Warning: Node EDGE_s,Index=%d. NULL m_LineGID} {} ::msgcat::mcset ca {Warning: CYLINDER_s,Index=%d. Created for GiD Line %d} {} ::msgcat::mcset ca {Error,NURBS_SURF_s:: vertex_dim=4 and not rational} {} ::msgcat::mcset ca {Error in NURBS_SURF_s, vertex_dim unexpected.} {} ::msgcat::mcset ca {Error,NURBS_CURVE_s:: vertex_dim=4 and not rational} {} ::msgcat::mcset ca {Error in NURBS_CURVE_s, vertex_dim unexpected.} {} ::msgcat::mcset ca {Warning: Unexpected logical value [%c] in file mode Text. Considered as False} {} ::msgcat::mcset ca {Error: Unknown mode file. Check if it is a valid PARASOLID file.} {} ::msgcat::mcset ca {Error: Field '%s' have no correct name} {} ::msgcat::mcset ca {Error: two QUESTION fields without one VALUE in the middle} {} ::msgcat::mcset ca {Error: QUESTION field have no correct name} {} ::msgcat::mcset ca {Error: incorrect name '%s' with spaces in QUESTION field} {} ::msgcat::mcset ca {Error: repeated name '%s' in QUESTION field} {} ::msgcat::mcset ca {Error: There is one VALUE field before this QUESTION field} {} ::msgcat::mcset ca {Error: VALUE field have no correct name} {} ::msgcat::mcset ca {WARNING: Unknown field '%s'} {} ::msgcat::mcset ca {Warning, Only exported Points and Lines in DXF Format.} {} ::msgcat::mcset ca {Transforming to problem type %s} {} ::msgcat::mcset ca {The local axes %s has been redefined} {} ::msgcat::mcset ca {The problem data field %s does not exist in the new problem type} {} ::msgcat::mcset ca {New problem data has more fields than old one} {} ::msgcat::mcset ca {Creating new interval %d} {} ::msgcat::mcset ca {Creating new intervals from %d to %d} {} ::msgcat::mcset ca {The interval data condition %s is not in the new problem type} {} ::msgcat::mcset ca {New interval data has more fields than old one} {} ::msgcat::mcset ca {Condition %s is not in new problem type. Not Upgraded} {} ::msgcat::mcset ca {Condition %s has some differences in new problemtype. Upgraded OK} {} ::msgcat::mcset ca {Condition %s is not in new problem type} {} ::msgcat::mcset ca {Material %s has diferent number of fields in the new problem type} {} ::msgcat::mcset ca {Created material '%s' inherited from '%s'} {} ::msgcat::mcset ca {Material '%s' has not been converted} {} ::msgcat::mcset ca {End of problem type transformation.} {} ::msgcat::mcset ca {There are no diferences between the old problem and the new one.} {} ::msgcat::mcset ca {There are some diferences between the old problem and the new one.} {} ::msgcat::mcset ca {Please, check the output messages for errors.} {} ::msgcat::mcset ca {Warning: Bad color in layer %s, Automatically changed.} {} ::msgcat::mcset ca {Error in Project::ReadfromDB. File no OK} {} ::msgcat::mcset ca {Error: two conditions with the same number: %d} {} ::msgcat::mcset ca {This model is incorrect. Assigned conditions are lost but geometry is read correctly. You should assign conditions again} {} ::msgcat::mcset ca {Error in Project::ReadfromDB. Unknown type} {} ::msgcat::mcset ca {Error: two materials with the same number} {} ::msgcat::mcset ca {Error in Project::ReadASCIIfromDB. File no OK} {} ::msgcat::mcset ca {Error in Project::ReadASCIIfromDB. different NumOfIntv} {} ::msgcat::mcset ca {Error in Project::ReadASCIIfromDB. Number of condition %d doesn't exist} {} ::msgcat::mcset ca {Error in Project::ReadASCIIfromDB. Unknown type} {} ::msgcat::mcset ca {Error in Project::ReadOldProblemAndIntervalData. Increase dataStore} {} ::msgcat::mcset ca {Error in Project::ReadProblemAndIntervalData. Increase dataStore} {} ::msgcat::mcset ca {Error: while reading PROBLEM DATA} {} ::msgcat::mcset ca {Error: while reading PROBLEM DATA. Some value not defined} {} ::msgcat::mcset ca {Error: 'INTERVAL DATA' block needed} {} ::msgcat::mcset ca {Error: while reading INTERVAL DATA} {} ::msgcat::mcset ca {Error: while reading INTERVAL DATA. Some value not defined} {} ::msgcat::mcset ca {Using bas file %s \n(located inside the project, not inside the problem type)} {} ::msgcat::mcset ca {Can't read file: %s} {} ::msgcat::mcset ca {Can't write file: %s} {} ::msgcat::mcset ca {Error in Project::GivePointCoord. Unknown type} {} ::msgcat::mcset ca {Error in Project::GivePointCoord. Unknown surf type} {} ::msgcat::mcset ca {Error opening /usr/lib/X11/rgb.txt file} {} ::msgcat::mcset ca {can't find color name in /usr/lib/X11/rgb.txt} {} ::msgcat::mcset ca {Error: Assigning Vector=Matrix where M(num cols)=%d num rows=%d} {} ::msgcat::mcset ca {Can't fill with %lf a zero lenght vector.} {} ::msgcat::mcset ca {Can't resize a vector of size %d.} {} ::msgcat::mcset ca {Index %d out of range.} {} ::msgcat::mcset ca {Different lenght vectors %d != %d.} {} ::msgcat::mcset ca {Error: Assigning Vector=Matrix where M(num cols)=%d} {} ::msgcat::mcset ca {Error in SurfMeshCurve::GiveSense} {} ::msgcat::mcset ca {Error in NormalAndElms::AppendElem} {} ::msgcat::mcset ca {Error: problem type has no units defined} {} ::msgcat::mcset ca {Error: file 'GrInterpNamesPost' isn't correct} {} ::msgcat::mcset ca {Error: some command NULL in file GrInterpNamesPost} {} ::msgcat::mcset ca {Error, in function UnirParches: different V points number in adjacent patches} {} ::msgcat::mcset ca {Error, in function UnirParches: different U points number in adjacent patches} {} ::msgcat::mcset ca {%s - couldn't write keyword.\n Contact your System Administrator.\nThe key will only be valid for this session.} {} ::msgcat::mcset ca {%s - couldn't open file.\n Contact your System Administrator.\nThe key will only be valid for this session.} {} ::msgcat::mcset ca {Error in Volume::GenMesh. Couldn't read} {} ::msgcat::mcset ca {Error, type ContactSurface can not return CloneNurbSurface.} {} ::msgcat::mcset ca {Not space available on heap} {} ::msgcat::mcset ca {Error in Elem::MidNode. Nnode=0} {} ::msgcat::mcset ca {Error in Figure::drawNormal. This func musn't be used} {} ::msgcat::mcset ca {Error in Figure::GiveCenter. This func musn't be used} {} ::msgcat::mcset ca {Error in Figure::GenMesh. This func musn't be used} {} ::msgcat::mcset ca {Error in Figure::Move. This func musn't be used} {} ::msgcat::mcset ca {Error in SetGidColor} {} ::msgcat::mcset ca {Error in TemporalMemory::malloc. i>=NumPointersInTM} {} ::msgcat::mcset ca {Error in TemporalMemory::free. Not found} {} ::msgcat::mcset ca {Error, type PolySurface can not return CloneNurbSurface.} {} ::msgcat::mcset ca {in DrawSet::operator(). Index too big} {} ::msgcat::mcset ca {in DrawSet::EnterFig. Increase MXFIGSTORED} {} ::msgcat::mcset ca {Error in SMElem::EnterNewCurve} {} ::msgcat::mcset ca {Error in SMElem::EnterNewCurve -2-} {} ::msgcat::mcset ca {Error, type SurfMesh can not return CloneNurbSurface.} {} ::msgcat::mcset ca {Jacobi: Ep - h!!} {} ::msgcat::mcset ca {Jacobi: Ep - a[ %d][ %d]!!} {} ::msgcat::mcset ca {Jacobi: can continue %d ...} {} ::msgcat::mcset ca { Result '%s' readed.} {} ::msgcat::mcset ca {Reading Results: Not enought memory %s} {} ::msgcat::mcset ca {alloca_mas_colores: Not enough memory for %d colors.} {} ::msgcat::mcset ca {alloca_mat_colores: Not enough memory for %d colors.} {} ::msgcat::mcset ca {PostRender error(l0989): %d} {} ::msgcat::mcset ca {PostRender error(l1467): %d} {} ::msgcat::mcset ca {I don't understand these limits: %d.} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Contour Fill.} {} ::msgcat::mcset ca {Contour Fill error(l1332): %d} {} ::msgcat::mcset ca {Contour Fill error(l1513): %d} {} ::msgcat::mcset ca {Contour Fill error(l1516): %d} {} ::msgcat::mcset ca {Contour Fill error(FillPostLegendInfo): %d} {} ::msgcat::mcset ca {Contour Fill error(l1942): %d} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Contour Lines.} {} ::msgcat::mcset ca {Contour Lines error(l1933): %d} {} ::msgcat::mcset ca {Contour Lines error(l2239): %d} {} ::msgcat::mcset ca {Contour Lines error(l2242): %d} {} ::msgcat::mcset ca {Contour Lines error(FillPostLegendInfo): %d} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Contour Ranges.} {} ::msgcat::mcset ca {Contour Ranges error(l1332): %d} {} ::msgcat::mcset ca {Contour Ranges error(l1513): %d} {} ::msgcat::mcset ca {Contour Ranges error(l1516): %d} {} ::msgcat::mcset ca {Contour Ranges error(FillPostLegendInfo): %d} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Contour Rangos.} {} ::msgcat::mcset ca {in line %d of file '%s'.} {} ::msgcat::mcset ca {Sorry, not enough memory for Smooth Contour Fill.} {} ::msgcat::mcset ca {Smooth Contour Fill error(l5409): %d} {} ::msgcat::mcset ca {Smooth Contour Fill error(l5422): %d} {} ::msgcat::mcset ca {Smooth Contour Fill error(l5425): %d} {} ::msgcat::mcset ca {Smooth Contour Fill error(FillPostLegendInfo): %d} {} ::msgcat::mcset ca {Sorry, not enough memory for Cuts-LineDiagram.} {} ::msgcat::mcset ca {Dividing exact with paralel planes, both planes cuts the line.} {} ::msgcat::mcset ca {Dividing exact with paralel planes, both planes cuts the triangle.} {} ::msgcat::mcset ca {Sorry, but couldn't find node is lines list while cutting cubes.} {} ::msgcat::mcset ca {Sorry, but couldn't find all nodes.cutting cubes} {} ::msgcat::mcset ca {Couldn't open file '%s'.} {} ::msgcat::mcset ca {Invalid Data Block %d ending at line %d.} {} ::msgcat::mcset ca {Error reading Nodes info in Data Block %d at line %d: wrong parameters} {} ::msgcat::mcset ca {Error reading Nodes info in Data Block %d at line %d.} {} ::msgcat::mcset ca {Unsupported element type '%s' - %d arround line %d in Data Block.} {} ::msgcat::mcset ca {Error reading Element info record %d in Data Block %d at line %d%s.} {} ::msgcat::mcset ca {found '%s'.} {} ::msgcat::mcset ca {Error reading Element info record %d in Data Block %d at line %d.} {} ::msgcat::mcset ca {Warning reading Output Set info record %d in Data Block %d at line %d%s.} {} ::msgcat::mcset ca {Error reading Output Set info record %d in Data Block %d at line %d%s.} {} ::msgcat::mcset ca {Error reading Output Set info record %d in Data Block %d at line %d.} {} ::msgcat::mcset ca {Warning reading Output Data Vector info record %d in Data Block %d at line %d%s.} {} ::msgcat::mcset ca {Error reading Output Data Vector info record %d in Data Block %d at line %d%s.} {} ::msgcat::mcset ca {Error reading Output Data Vector info record %d in Data Block %d at line %d.} {} ::msgcat::mcset ca {Couldn't find a valid 'Data Block ID' at line %d of '%s'} {} ::msgcat::mcset ca {Couldn't find any FEMAP Data Block} {} ::msgcat::mcset ca {Found %d Data Blocks in '%s'} {} ::msgcat::mcset ca {Couldn't find any Data Block} {} ::msgcat::mcset ca {Unknown location for result %s on %s.} {} ::msgcat::mcset ca {Not enough memory %s %s} {} ::msgcat::mcset ca {File '%s' can not be found.} {} ::msgcat::mcset ca {File(s) '%s.msh' ('%s.res') written.} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Iso Superficies.} {} ::msgcat::mcset ca {Reading Mesh, type of element %s} {} ::msgcat::mcset ca {Reading Mesh: wrong number of elements %s} {} ::msgcat::mcset ca {Reading Mesh: wWrong number of points %s} {} ::msgcat::mcset ca {Reading Mesh: wrong number of final points %s} {} ::msgcat::mcset ca {ExtrudeSet: I don't know what to do with %d element type.} {} ::msgcat::mcset ca {Unknown cut type while exploding cuts: %d.} {} ::msgcat::mcset ca {Not enough natural coordinates components, needed %d,} {} ::msgcat::mcset ca {Not enough natural coordinates, needed %d,} {} ::msgcat::mcset ca {Result: syntax error in line %d, } {} ::msgcat::mcset ca {Too many components por the result ¿?\n %d instead of %d,\nin line %d} {} ::msgcat::mcset ca {in line %d, jumping till 'end values'} {} ::msgcat::mcset ca {Wrong number of arguments, should be %d: } {} ::msgcat::mcset ca {ResultGroup: syntax error in line %d, } {} ::msgcat::mcset ca {Too many components por the result ¿?\n %d instead of %d,} {} ::msgcat::mcset ca {Couldn't open file '%s': %s.} {} ::msgcat::mcset ca {in result '%s' ( line %d) of archive '%s'. } {} ::msgcat::mcset ca {Reading %d Points from GiD.} {} ::msgcat::mcset ca {Reading %d Triangles from GiD.} {} ::msgcat::mcset ca {Reading %d Quadrilaterals from GiD.} {} ::msgcat::mcset ca {Reading %d Tetrahedras from GiD.} {} ::msgcat::mcset ca {Reading %d Cubes from GiD.} {} ::msgcat::mcset ca {Reading %d Lines from GiD.} {} ::msgcat::mcset ca {Using sets with no name!!} {} ::msgcat::mcset ca {Wrong number of arguments %d, instead of 4/5 in '%s', should be %s %s.} {} ::msgcat::mcset ca {Wrong number of arguments %d, instead of 5 in '%s', should be %s %s.} {} ::msgcat::mcset ca {Wrong number of arguments %d, instead of 3/4 in '%s', should be %s %s.} {} ::msgcat::mcset ca {Some errors found in the results file: } {} ::msgcat::mcset ca {Warning some errors found in the results file:} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Min Max.} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Vectors.} {} ::msgcat::mcset ca { in line %d of file '%s'.} {} ::msgcat::mcset ca {'%s' seems to be a binary file. Only ASCII Tecplot files can be read.} {} ::msgcat::mcset ca { Writing '%s'} {} ::msgcat::mcset ca {Sorry, but couldn't find a boundary in the texture.} {} ::msgcat::mcset ca {%s - it seems to be too much for a binary string: %d.} {} ::msgcat::mcset ca {%s - it seems to be too few for a binary string: %d.} {} ::msgcat::mcset ca {%s - not enough memory storing binary char *: %d.} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Matrix vectors.} {} ::msgcat::mcset ca {Sorry, not enough memory for Cut-Matrix vectors.2.} {} ::msgcat::mcset ca {Error in ACIS Out. Couldn't open '%s'} {} ::msgcat::mcset ca {GiD_Mesh -- invalid mode '%s': should be: create, delete or edit} {} ::msgcat::mcset ca {GiD_Mesh -- invalid entity type '%s': should be node or element} {} ::msgcat::mcset ca {GiD_Mesh -- bad entity number %d} {} ::msgcat::mcset ca {GiD_Mesh -- cannot use delete or edit in 'append' mode} {} ::msgcat::mcset ca {GiD_Mesh -- invalid node coordinates '%s'} {} ::msgcat::mcset ca {GiD_Mesh -- node '%d' already exists} {} ::msgcat::mcset ca {GiD_Mesh -- Node '%d' created.} {} ::msgcat::mcset ca {GiD_Mesh -- 'append' can not be used to edit a node} {} ::msgcat::mcset ca {GiD_Mesh -- node '%d' does not exists} {} ::msgcat::mcset ca {GiD_Mesh -- Node '%d' modified.} {} ::msgcat::mcset ca {GiD_Mesh -- 'append' cannot be used to delete a node} {} ::msgcat::mcset ca {GiD_Mesh -- Node '%d' cannot be deleted, it has higherentity element '%d'} {} ::msgcat::mcset ca {GiD_Mesh -- Node '%d' deleted.} {} ::msgcat::mcset ca {GiD_Mesh -- cannot create, delete or modify element, mesh is empty of nodes} {} ::msgcat::mcset ca {GiD_Mesh -- bad element type '%s' should be OnlyPoints,linear,triangle,quadrilateral,tetrahedra,hexahedra or prism} {} ::msgcat::mcset ca {GiD_Mesh -- bad number of nodes=%d check connectivity} {} ::msgcat::mcset ca {GiD_Mesh -- '%s'} {} ::msgcat::mcset ca {GiD_Mesh -- node %d does not exists} {} ::msgcat::mcset ca {GiD_Mesh -- bad number of connectivities=%d, expected '%d'} {} ::msgcat::mcset ca {GiD_Mesh -- material name '%s' not found} {} ::msgcat::mcset ca {GiD_Mesh -- elem '%d' already exists} {} ::msgcat::mcset ca {GiD_Mesh -- cannot create mesh with nnode=%d and element type=%d} {} ::msgcat::mcset ca {GiD_Mesh -- Element '%d' created.} {} ::msgcat::mcset ca {GiD_Mesh -- cannot be used 'append' to edit a element} {} ::msgcat::mcset ca {GiD_Mesh -- elem '%d' not exists} {} ::msgcat::mcset ca {GiD_Mesh -- cannot be used 'append' to delete a element} {} ::msgcat::mcset ca {Error in NurbLine::CreateInterpolated.} {} ::msgcat::mcset ca {Polyline number %i. Old segments used for surfaces: } {} ::msgcat::mcset ca {New segments used for surfaces: } {} ::msgcat::mcset ca {NURB line number %i repaired. Defined with few points.} {} ::msgcat::mcset ca {NURB line number %i repaired. Bad internal definition.} {} ::msgcat::mcset ca {Surface %d, base shape cropped} {} ::msgcat::mcset ca {NURB surface number %i repaired. Bad internal definition.} {} ::msgcat::mcset ca {WriteIges. Error, edge direction not found writting surf %d} {} ::msgcat::mcset ca {WriteIges. Error, shell direction not found writting vol %d} {} ::msgcat::mcset ca {Source Point} {} ::msgcat::mcset ca {Destination Point} {} ::msgcat::mcset ca {All Types} {} ::msgcat::mcset ca {Sweep cannot be used with all types selection} {} ::msgcat::mcset ca {Result Surface} {} ::msgcat::mcset ca {Hidden lines} {} ::msgcat::mcset ca {Extruded nodes} {} ::msgcat::mcset ca {Extruded edges} {} ::msgcat::mcset ca {ACIS write} {} ::msgcat::mcset ca {ACIS file '%s' written OK. Leaving} {} ::msgcat::mcset ca {Enter type of entity to %s (Points,Lines,Surfaces,Volumes,AllTypes)} {} ::msgcat::mcset ca {Enter type of entity to %s (Nodes,Elements,AllTypes)} {} ::msgcat::mcset ca {{Points} {Lines} {Surfaces} {Volumes} {AllTypes} {Cancel}} {} ::msgcat::mcset ca {{Nodes} {Elements} {AllTypes} {Cancel}} {} ::msgcat::mcset ca {Selected %i %s} {} ::msgcat::mcset ca surfaces superfícies ::msgcat::mcset ca volumes volums ::msgcat::mcset ca {Choose transformation type: (rotation/translation/mirror/scale/offset/sweep/align)} {} ::msgcat::mcset ca {Enter %s to %s} {} ::msgcat::mcset ca {%i %s rejected. They have higher entities} {} ::msgcat::mcset ca {Enter %s to uncollapse} {} ::msgcat::mcset ca {How should the elevations of the Result Surface be shown (%s)?} {} ::msgcat::mcset ca {{Extruded nodes} {Extruded edges} {None} {Cancel}} {} ::msgcat::mcset ca {Result Surface elevations shown with extruded nodes.} {} ::msgcat::mcset ca {Result Surface elevations shown with extruded edges.} {} ::msgcat::mcset ca {Result Surface elevations not shown.} {} ::msgcat::mcset ca {Error in pow. Remember, cannot be used mathematical operations as arguments of pow} {} ::msgcat::mcset ca {Error in atan2. Remember, cannot be used mathematical operations as arguments of atan2} {} ::msgcat::mcset ca {Error: variable must have 1 argument} {} ::msgcat::mcset ca {Error: variable's argument too big} {} ::msgcat::mcset ca {Error: variable must be int or real} {} ::msgcat::mcset ca { must be defined INT or REAL} {} ::msgcat::mcset ca {Error in Calculator. Increase Stack} {} ::msgcat::mcset ca {Error: final operation doesn't give one value} {} ::msgcat::mcset ca {it's necessary parentheses} {} ::msgcat::mcset ca {Error: in 'strcmp' or 'strcasecmp'} {} ::msgcat::mcset ca {Error: variable must be char} {} ::msgcat::mcset ca {must be a char} {} ::msgcat::mcset ca Condition {} ::msgcat::mcset ca Contents {} ::msgcat::mcset ca {Current accelerators} {} ::msgcat::mcset ca {Cannot change to the directory '%s'. Permission denied.} {} ::msgcat::mcset ca {Cannot open output file '%s'} {} ::msgcat::mcset ca {Line not created IGES_%d D#%d} {} ::msgcat::mcset ca {Line not created, only accepted IGES 106 FORM 11,12 or 63 IGES_%d D#%d} {} ::msgcat::mcset ca {Surface not created IGES_%d D#%d} {} ::msgcat::mcset ca {Can't compute the inverse of a zero size Matriu} {} ::msgcat::mcset ca {Can't compute the inverse of a rectangular (%dx%d) Matriu} {} ::msgcat::mcset ca {Can't compute the determinant of a zero size Matriu} {} ::msgcat::mcset ca {Can't compute the determinant of a rectangular (%dx%d) Matriu} {} ::msgcat::mcset ca {Can't add two Matriu with diferent sizes: Matriu 1 (%dx%d), Matriu 2 (%dx%d)} {} ::msgcat::mcset ca {Can't add zero sized matrices} {} ::msgcat::mcset ca {Continue with layers. (ESC to leave)} {} ::msgcat::mcset ca {Changed %i entities to layer: %s (%i of them where already)} {Canviades %i entitats a la capa: %s (%i de elles ja hi eren)} ::msgcat::mcset ca {Line not created, VDA Name=%s} {} ::msgcat::mcset ca {quadrilaterals %d, %d, line %d} {} ::msgcat::mcset ca {quadrilaterals %d, %d.} {} ::msgcat::mcset ca {quadrilaterals3 %d, %d.} {} ::msgcat::mcset ca {Comment Line 1 is now '%s'} {} ::msgcat::mcset ca {Comment Line 2 is now '%s'} {} ::msgcat::mcset ca {Comment Line 3 is now '%s'} {} ::msgcat::mcset ca {Minimum value greater then the maximum value} {} ::msgcat::mcset ca {ResultRange entry must be of the form:} {} ::msgcat::mcset ca {Couldn't find 'end values', } {} ::msgcat::mcset ca {Calling GiDHelpWindow: should provide a -dir option} {} ::msgcat::mcset ca {ASCII project} {} ::msgcat::mcset ca {Current Deformation analysis differs from current Result View's analysis. Choose which one should be valid for the animation} {} ::msgcat::mcset ca {Write window configuration} {} ::msgcat::mcset ca {File '%s' does not exist.} {} ::msgcat::mcset ca {Directory '%s' does not exist.} {} ::msgcat::mcset ca {Invalid file name '%s'.} {} ::msgcat::mcset ca {File '%s' already exists.Can not rename.} {} ::msgcat::mcset ca {You have not write permision on the directory '%s'. Permission denied.} {} ::msgcat::mcset ca {Cannot change to the directory '%s'.Permission denied.} {} ::msgcat::mcset ca {File '%s' already exists. Do you want to overwrite it?} {} ::msgcat::mcset ca {Can't open ACIS file: ...Leaving} {} ::msgcat::mcset ca {You can continue} {} ::msgcat::mcset ca {You can continue (ESC to leave)} {} ::msgcat::mcset ca {Wrong args: info layers -entities points|lines|surfaces|volumes|nodes|elements layer1 layer2 ...} {} ::msgcat::mcset ca {Wrong args: info layers -entities nodes without mesh} {} ::msgcat::mcset ca {Wrong args: info layers -entities elements without mesh} {} ::msgcat::mcset ca {Wrong args: info layers -entities type_entity layernames.} {} ::msgcat::mcset ca {Wrong num args in info gendata} {} ::msgcat::mcset ca {Wrong number of arguments in info unitssystems} {} ::msgcat::mcset ca {Wrong last argument in info units} {} ::msgcat::mcset ca {Wrong number of arguments in info magnitudes} {} ::msgcat::mcset ca Saved {} ::msgcat::mcset ca {GiD_CreateData: Wrong arguments, must be: createdata create|delete material ?basename? name ?values?} {} ::msgcat::mcset ca {GiD_ModifyData: Wrong data class argument %s, must be: materials, intvdata or gendata} {} ::msgcat::mcset ca {GiD_AssignData: Wrong number of values} {} ::msgcat::mcset ca {GiD_AssignData: Wrong element or face number} {} ::msgcat::mcset ca {GiD_AssignData: Wrong element number} {} ::msgcat::mcset ca {GiD_AssignData: Wrong element face number} {} ::msgcat::mcset ca {GiD_AssignData: Wrong arguments, must be: GiD_AssignData (material|condition) () } {} ::msgcat::mcset ca {GiD_AccessValue: Wrong arguments' number, must be: GiD_AccessValue (get|set) (materials|conditions) [| ]} {} ::msgcat::mcset ca {GiD_AccessValue: Wrong operation argument %s, must be: get or set} {} ::msgcat::mcset ca {GiD_AccessValue: Wrong data class argument %s, must be: materials, conditions, intvdata or gendata} {} ::msgcat::mcset ca {_isprbquestion: Wrong number of arguments, should be '_isprbquestion (0|1) '} {} ::msgcat::mcset ca {GiD_IntervalData: Wrong arguments, must be: GiD_IntervalData create|delete|set |?copyconditions?} {} ::msgcat::mcset ca {GiD_IntervalData: Wrong arguments, must be: GiD_IntervalData create ?copyconditions?} {} ::msgcat::mcset ca {Wrong # args: should be \"GiD_Mesh create|delete|edit node|element |append onlypoints|linear|triangle|quadrilateral|tetrahedra|hexahedra|prism ?? | \"} {} ::msgcat::mcset ca {Wrong # args, should be: \"GiD_Mesh create|delete|edit node |append {x y z}\"} {} ::msgcat::mcset ca {Wrong # args: should be \"GiD_Mesh create|delete|edit node|element |append onlypoints|linear|triangle|quadrilateral|tetrahedra|hexahedra|prism ??\"} {} ::msgcat::mcset ca {Can't open IGES file: ...Leaving} {} ::msgcat::mcset ca {IGES Type 143: fail continuity in contour %d} {} ::msgcat::mcset ca {Ambiguous name:'%s'. Options:} {} ::msgcat::mcset ca {Deleted %i nodes} {} ::msgcat::mcset ca {Can't open Parasolid file: ...Leaving} {} ::msgcat::mcset ca {Error in Project::WriteToAscii 2 Can't open file} {} ::msgcat::mcset ca {Assigned %i new %s to condition: %s} {} ::msgcat::mcset ca {Unassigned %i %s to condition: %s} {} ::msgcat::mcset ca {Enter %s to assign to cond: %s ('Change' to change default values)} {} ::msgcat::mcset ca {Enter %s to unassign from cond: %s ('Change' to assign again)} {} ::msgcat::mcset ca {Layer %s selected. Enter more %s to assign to cond: %s (esc to finish).} {} ::msgcat::mcset ca {Layer %s remover from selection. Enter more %s to assign to cond: %s (esc to finish).} {} ::msgcat::mcset ca {Layer %s not exists. Enter %s to assign to cond: %s} {} ::msgcat::mcset ca {Enter %s with new values} {} ::msgcat::mcset ca {Enter %s to assign to Material: %s} {} ::msgcat::mcset ca {Enter %s to unassign its material} {} ::msgcat::mcset ca {Can't open file %s for reading} {} ::msgcat::mcset ca {Can't open file %s for writing} {} ::msgcat::mcset ca {Can't open file: %s to write. Leaving} {} ::msgcat::mcset ca {Arc from polylines not implemented yet. Continue selecting (ESC to leave)} {} ::msgcat::mcset ca {Nothing created. You can continue (ESC to leave)} {} ::msgcat::mcset ca {Enter %s to assign this element type} {} ::msgcat::mcset ca {End base and joining. Enter points} {} ::msgcat::mcset ca {Ambiguous name in local axes:'%s'. Options:} {} ::msgcat::mcset ca {End base. Enter points} {} ::msgcat::mcset ca {Error in SetGeom::SelectEntities. No entities type} {} ::msgcat::mcset ca {No errors} {} ::msgcat::mcset ca {No memory} {} ::msgcat::mcset ca {Usage: vdaXgid inputfile} {} ::msgcat::mcset ca {Input file extension must be .gid or .vda} {} ::msgcat::mcset ca {Open error or not such file} {} ::msgcat::mcset ca {Unexpected end of file} {} ::msgcat::mcset ca {Write error} {} ::msgcat::mcset ca {Lines must be 80 characters wide, with succesive numbers right justified in the last eight} {} ::msgcat::mcset ca {Header must begin at first line} {} ::msgcat::mcset ca {Current version is 2.0 (older than file version)} {} ::msgcat::mcset ca {Parse error or bad data line} {} ::msgcat::mcset ca {Invalid type} {} ::msgcat::mcset ca {Invalid point} {} ::msgcat::mcset ca {Referenced entity was not previously defined} {} ::msgcat::mcset ca {Degree of curves must lie between 2 and 20 (order 3 to 21)} {} ::msgcat::mcset ca {VDA reading stopped by user} {} ::msgcat::mcset ca {Point not created:} {} ::msgcat::mcset ca {Point set not created:} {} ::msgcat::mcset ca {Mdi set not created:} {} ::msgcat::mcset ca {Circle not created:} {} ::msgcat::mcset ca {Curve not created:} {} ::msgcat::mcset ca {Surface not created:} {} ::msgcat::mcset ca {Cons not created:} {} ::msgcat::mcset ca {Face not created:} {} ::msgcat::mcset ca {Top not created:} {} ::msgcat::mcset ca {Group not created:} {} ::msgcat::mcset ca {Matrix not created:} {} ::msgcat::mcset ca {Transformation matrix not created:} {} ::msgcat::mcset ca {Can't open VDA file: ...Leaving} {} ::msgcat::mcset ca {Contact your Software dealer to\nobtain the key for this host:\n\nName: %s\nOperating System: %s\nsysinfo: %s} {} ::msgcat::mcset ca {Error in base file in file} {} ::msgcat::mcset ca {Line number} {} ::msgcat::mcset ca {Now the} {} ::msgcat::mcset ca {Cutting the mesh} {} ::msgcat::mcset ca {Choose the side} {} ::msgcat::mcset ca {you want.} {} ::msgcat::mcset ca {Dividing the mesh} {} ::msgcat::mcset ca {Dividing the set} {} ::msgcat::mcset ca {At the moment, quadratic elements are handled as linear ones while cutting.} {} ::msgcat::mcset ca {Cutting all meshes} {} ::msgcat::mcset ca {Cutting displayed sets} {} ::msgcat::mcset ca {Using 1. cut plane for all the meshes} {} ::msgcat::mcset ca {Dividing the lines} {} ::msgcat::mcset ca {At the moment, quadratic elements are handled as linear ones.} {} ::msgcat::mcset ca Drawing... {} ::msgcat::mcset ca {Cutting quadrilaterals} {} ::msgcat::mcset ca {the quadrilateral} {} ::msgcat::mcset ca {to the quadrilateral} {} ::msgcat::mcset ca {Dividing exact with paralel planes, both planes cuts the quadrilateral.} {} ::msgcat::mcset ca {the quadrilateral: %d.} {} ::msgcat::mcset ca {the quadrilateral3: %d.} {} ::msgcat::mcset ca {Quadrilaterals3 %d, %d.} {} ::msgcat::mcset ca {Quadrilaterals %d, %d, line %d} {} ::msgcat::mcset ca {Quadrilaterals %d, %d.} {} ::msgcat::mcset ca {Converting unsupported element type 'Wedge 6' ( 0 1 2 4 5 6) arround line %d to 'Hexaedra nnode 8' repeating nodes 2 and 6.} {} ::msgcat::mcset ca {to store quadrilaterals.} {} ::msgcat::mcset ca {{1 --------} {2 -- -- } {3 - · - · } {4 - - - - } {5 · · · · } {6 --- --- } {7 - - } {8 ·-··-·} {Define} {Cancel}} {} ::msgcat::mcset ca {BMP file '%s' exists. Overwrite? (y/ESC)} {} ::msgcat::mcset ca {one, four or nine Gauss Points on quadrilaterals} {} ::msgcat::mcset ca {Cutting :} {} ::msgcat::mcset ca {Cutting Iso Surfaces:} {} ::msgcat::mcset ca {Dividing Meshes: } {} ::msgcat::mcset ca {Dividing :} {} ::msgcat::mcset ca {Dividing Sets:} {} ::msgcat::mcset ca {Dividing Sets: } {} ::msgcat::mcset ca {Exact Dividing :} {} ::msgcat::mcset ca {Dividing Lines :} {} ::msgcat::mcset ca {Selecting elements from Mesh: } {} ::msgcat::mcset ca {Selecting elements from} {} ::msgcat::mcset ca {Selecting elements from Set:} {} ::msgcat::mcset ca {Selecting elements from Set: } {} ::msgcat::mcset ca {TableName must be between quotes, } {} ::msgcat::mcset ca {a ResultRangesTableName must be supplied.} {} ::msgcat::mcset ca {AnalysisName must be between quotes, } {} ::msgcat::mcset ca Overwrite? {} ::msgcat::mcset ca {Border vectors will be drawn.} {} ::msgcat::mcset ca {Select %s to draw its normal} {} ::msgcat::mcset ca {Enter %s to change to layer: %s} {} ::msgcat::mcset ca {Enter %s to send to its layer back} {} ::msgcat::mcset ca {Enter %s to send to its layer back (opposite)} {} ::msgcat::mcset ca {Enter %s to change them and lower entities to layer: %s} {} ::msgcat::mcset ca {Enter %s to send them and lower entities to its layer back} {} ::msgcat::mcset ca {Enter %s to send them and lower entities to its layer back (opposite)} {} ::msgcat::mcset ca {Enter %s to signal} {} ::msgcat::mcset ca {Enter size to assign to %s (0.0 to unassign)} {} ::msgcat::mcset ca {Enter %s to witch assign size: %f} {} ::msgcat::mcset ca {Enter %s to witch unassign size} {} ::msgcat::mcset ca {Select %s to assign this mesh criteria} {} ::msgcat::mcset ca {Added %i new %s to the selection. Enter more %s. (ESC to leave)} {} ::msgcat::mcset ca {Removed %i new %s from the selection. Enter more %s. (ESC to leave)} {} ::msgcat::mcset ca {Enter %s to copy} {} ::msgcat::mcset ca {Leaving ACIS reading} {} ::msgcat::mcset ca {Leaving surfaces intersection} {} ::msgcat::mcset ca {Leaving DXF reading} {} ::msgcat::mcset ca {Leaving zoom by points} {} ::msgcat::mcset ca {Leaving rotation by angle} {} ::msgcat::mcset ca {Leaving rotation by points} {} ::msgcat::mcset ca {Leaving view saving} {} ::msgcat::mcset ca {Leaving view reading} {} ::msgcat::mcset ca {Leaving setting view} {} ::msgcat::mcset ca {Leaving IGES reading} {} ::msgcat::mcset ca {Directory Entry:} {} ::msgcat::mcset ca {Incompatible dimensions for multiply. Matriu 1 (%dx%d), Matriu 2 (%dx%d)} {} ::msgcat::mcset ca {Leaving geometry repair} {} ::msgcat::mcset ca {Leaving delete elements. Nothing deleted} {} ::msgcat::mcset ca {Leaving remove lonely nodes. No changes} {} ::msgcat::mcset ca {Leaving Parasolid reading} {} ::msgcat::mcset ca {Leaving write function} {} ::msgcat::mcset ca {Leaving read file function} {} ::msgcat::mcset ca {Leaving. No changes.} {} ::msgcat::mcset ca {Leaving. All meshing information reset.} {} ::msgcat::mcset ca {Leaving creation of new cond. No new condition} {} ::msgcat::mcset ca {Leaving assign conditions. No changes} {} ::msgcat::mcset ca {Leaving. All materials unassigned.} {} ::msgcat::mcset ca {Leaving assign entities to materials. No new figures} {} ::msgcat::mcset ca {Leaving deletion of materials.} {} ::msgcat::mcset ca {Leaving New %s. No new %s} {} ::msgcat::mcset ca {Leaving assign entities to layers. No new figures} {} ::msgcat::mcset ca {Leaving sending entities to layers back. No new figures} {} ::msgcat::mcset ca {Leaving select entities. Nothing selected} {} ::msgcat::mcset ca {Leaving signal entities} {} ::msgcat::mcset ca {Leaving boundary draw.} {} ::msgcat::mcset ca {Leaving change degree. No changes} {} ::msgcat::mcset ca {Leaving insert project function} {} ::msgcat::mcset ca {Leaving cancel mesh. No changes} {} ::msgcat::mcset ca {Leaving collapse entities. Nothing selected} {} ::msgcat::mcset ca {Leaving point creation} {} ::msgcat::mcset ca {Leaving volume generation} {} ::msgcat::mcset ca {polyline interior points: } {} ::msgcat::mcset ca {Leaving 4-sided surface generation} {} ::msgcat::mcset ca {Leaving assign Mesh sizes to entities} {} ::msgcat::mcset ca {Leaving assign element type to entities} {} ::msgcat::mcset ca {Leaving VDA reading} {} ::msgcat::mcset ca sec. {} ::msgcat::mcset ca Zoom/Pan {} ::msgcat::mcset ca {Start view} {} ::msgcat::mcset ca {Leaving analisis selection} {} ::msgcat::mcset ca {Leaving contour fill} {} ::msgcat::mcset ca {Select the %s 'from' view} {} ::msgcat::mcset ca {Select the %s 'to' view} {} ::msgcat::mcset ca {The Time for the %d Zoom/Pan is too little (<0) or too big (>1000): %s} {} ::msgcat::mcset ca {X angle} {} ::msgcat::mcset ca {Y angle} {} ::msgcat::mcset ca {Z angle} {} ::msgcat::mcset ca {Render state} {} ::msgcat::mcset ca {Leaving dividing lines} {} ::msgcat::mcset ca {Over points} {} ::msgcat::mcset ca {Draw this condition} {} ::msgcat::mcset ca {Draw all conditions} {} ::msgcat::mcset ca {Only conditions} {} ::msgcat::mcset ca {Leaving color type selection for the 'mesh copy'.} {} ::msgcat::mcset ca {Leaving volume set selection} {} ::msgcat::mcset ca {Only condition} {} ::msgcat::mcset ca {Leaving Point Analysis} {} ::msgcat::mcset ca {Some entities} {} ::msgcat::mcset ca {This material} {} ::msgcat::mcset ca {Leaving writing graphs} {} ::msgcat::mcset ca {How many iso-surfaces do you want ?\nResults interval: [ Min: %g - Max: %g]} {} ::msgcat::mcset ca {Found an error in file.} {} ::msgcat::mcset ca {found an 'end values' too early} {} ::msgcat::mcset ca {found an error} {} ::msgcat::mcset ca {found 'End Values' before 'Values'.} {} ::msgcat::mcset ca {One number must be entered} {} ::msgcat::mcset ca {Enter Normal} {} ::msgcat::mcset ca {Error in ContactSurface::GenMesh. Mesh already exists} {} ::msgcat::mcset ca {Error in ContactVolume::GenMesh. Mesh already exists} {} ::msgcat::mcset ca {Error meshing contact volume %i. Remember that one surface can only belong to one contact volume} {} ::msgcat::mcset ca {Error in SetGeom::CreateStructuredVolumes} {} ::msgcat::mcset ca {Leaving Show Min Max} {} ::msgcat::mcset ca {Leaving stream} {} ::msgcat::mcset ca {Leaving AddTexture} {} ::msgcat::mcset ca {Leaving draw vectors.} {} ::msgcat::mcset ca {Leaving draw Local Axes vectors.} {} ::msgcat::mcset ca {Define_max_colors: Not enough memory for %d colors.} {} ::msgcat::mcset ca {Leaving display vectors.} {} ::msgcat::mcset ca {What's new} {} ::msgcat::mcset ca {Error: info intvdata -interval intv (1<=intv<=nintv)} {} ::msgcat::mcset ca {Error: line number %i is not a NURBS} {} ::msgcat::mcset ca {Prefix for '*.tif' files} {} ::msgcat::mcset ca {Prefix for '*.jpg' files} {} ::msgcat::mcset ca {Prefix for '*.gif' files} {} ::msgcat::mcset ca {Error: Couldn't open temporary directory} {} ::msgcat::mcset ca {Error: Couldn't redirect output to file 'tmp-gidOutput' in temporal} {} ::msgcat::mcset ca {Enter new name} {} ::msgcat::mcset ca {Error creating NURBS.} {} ::msgcat::mcset ca {Error in NurbSurface::NurbSurface. Mesh already exists} {} ::msgcat::mcset ca {Error creating NURBS. Line %i is already inside NURBS} {} ::msgcat::mcset ca {Enter material name to delete} {} ::msgcat::mcset ca {Repeated name of materials:%s. Try again (ESC to leave)} {} ::msgcat::mcset ca {Error in SetGeom::ReadASCIIfromDB. Splines not allowed} {} ::msgcat::mcset ca Security {Error: Línees han de compartir un punt. Intenti-ho de nou} ::msgcat::mcset ca Unzipping {} ::msgcat::mcset ca {Error in SetGeom::CreateVolume. Increase NumOfSurfs*20} {} ::msgcat::mcset ca {Running interface. Wait, please} {Error: les superfícies són de diferent tipus} ::msgcat::mcset ca {Error: surfaces have not same number of lines} {Error: les superfícies no tenen el mateix número de línees} ::msgcat::mcset ca {Error: surfaces must have more than 2 lines} {Error: superfícies han de tenir més de 2 línees} ::msgcat::mcset ca {Error: Three levels of polylines are not permited. You can continue} {Error: tres nivells de polilínees no estan permesos. Pot continuar} ::msgcat::mcset ca {Error: Can't create one polyline over another polyline with surfaces inside it. You can continue} {Error: No es pot crear una polilínea sobre una atra polilínea ue té superfícies a dintre. Pot continuar} ::msgcat::mcset ca {Error: Only 4-sided surfaces are permitted over lines. You can continue} {Error: Solament superfícies de 4 costats estan permeses sobre línees. Pot continuar} ::msgcat::mcset ca Processing {Errors en creació de superfície (cap superfície creada)} ::msgcat::mcset ca {Error: Surface with normal=0 (no surface created)} {Error: superfície amb normal 0 (cap superfície creada)} ::msgcat::mcset ca {Error in SetMesh::SelectEntities. No entities type} {} ::msgcat::mcset ca {Error in SMNode::CheckCoherence} {} ::msgcat::mcset ca {Error: %s not found as magnitud} {} ::msgcat::mcset ca {Error: magnitud %s does not have basic unit defined} {} ::msgcat::mcset ca {Choose Color error(l1315): %d} {} ::msgcat::mcset ca {Choose Color error(l1343): %d} {} ::msgcat::mcset ca {Choose Color error(l1371): %d} {} ::msgcat::mcset ca {Choose Color error(l1399): %d} {} ::msgcat::mcset ca {Didn't painted} {} ::msgcat::mcset ca {Creating Octtree} {} ::msgcat::mcset ca Cutting {} ::msgcat::mcset ca Corrected {} ::msgcat::mcset ca {Error with new results format} {} ::msgcat::mcset ca {Color of stream lines left unchanged} {} ::msgcat::mcset ca {Couldn't glue boundary texture to boundary set.} {} ::msgcat::mcset ca {Which contour limits should I use to paint the results for this Step ( ShownSets / AllSets) [ ShownSets]:} {} ::msgcat::mcset ca {Percentage done} {} ::msgcat::mcset ca {hole: %d, surfs: } {} ::msgcat::mcset ca {Found unexpected result on line } {} ::msgcat::mcset ca {End view} {} ::msgcat::mcset ca Duration {} ::msgcat::mcset ca {Leaving contour lines} {} ::msgcat::mcset ca {Leaving Contour Ranges} {} ::msgcat::mcset ca {Leaving Add Result Ranges Table to Result} {} ::msgcat::mcset ca {Leaving mesh cutting} {} ::msgcat::mcset ca {Leaving dividing mesh} {} ::msgcat::mcset ca {Leaving dividing set} {} ::msgcat::mcset ca {Leaving cut plane reading} {} ::msgcat::mcset ca Values {} ::msgcat::mcset ca {Leaving Line Diagram} {} ::msgcat::mcset ca {Leaving volume selection} {} ::msgcat::mcset ca {Leaving surface set selection} {} ::msgcat::mcset ca {Leaving cut set selection} {} ::msgcat::mcset ca {Conds + LA} {} ::msgcat::mcset ca {Draw condition field} {} ::msgcat::mcset ca {Leaving saving cover meshes.} {} ::msgcat::mcset ca {Cond + LA} {} ::msgcat::mcset ca {Leaving point graf} {} ::msgcat::mcset ca {Leaving Border Graf} {} ::msgcat::mcset ca {All materials} {} ::msgcat::mcset ca {Change Color (mono)} {} ::msgcat::mcset ca {Error: Accelerators can be of the types:\nCtrl-s\nAlt-a\nF1\nCtrl-F1\nCtrl-x Ctrl-a} {} ::msgcat::mcset ca {Degrees. To} {} ::msgcat::mcset ca Culling {} ::msgcat::mcset ca {Create new point} {} ::msgcat::mcset ca {Incorrect version number in 'GiD Post Results File X.X', should be 1.0,} {} ::msgcat::mcset ca {Leaving postprocess reading} {} ::msgcat::mcset ca {Leaving postprocess adding} {} ::msgcat::mcset ca {Leaving postprocess writing} {} ::msgcat::mcset ca {Leaving FEMAP postprocess reading} {} ::msgcat::mcset ca {Leaving TECPLOT postprocess reading} {} ::msgcat::mcset ca {Error in ArcLine::Move. Couldn't create arc number=%d} {} ::msgcat::mcset ca {Error in Surface::EnterNewLine. Only numnewlines=1 is valid for Coons.} {} ::msgcat::mcset ca {Error in PlSurface::GenMesh. Mesh already exists} {} ::msgcat::mcset ca {Error in CoonSurface::GenMesh. Mesh already exists} {} ::msgcat::mcset ca {Error in CoonSurface::GenStructuredMesh. Mesh already exists} {} ::msgcat::mcset ca {Leaving draw Matrix vectors.} {} ::msgcat::mcset ca {Error: unknown material. Usage: info materials BOOKS|'Material name' ...} {} ::msgcat::mcset ca {Error: info conditions -interval intv (1<=intv<=nintv)} {} ::msgcat::mcset ca {Calculate window} {} ::msgcat::mcset ca {Line options} {} ::msgcat::mcset ca {Error: surface number %i is not a NURBS} {} ::msgcat::mcset ca {Error: to run 'gid is necessary to set the environment variable: GIDDEFAULT to the path of the executables} {} ::msgcat::mcset ca {Error: to run 'gid' is necessary to set the environment variable: GIDDEFAULT to the path of the executables} {} ::msgcat::mcset ca {Save MPEG on} {} ::msgcat::mcset ca {Save AVI on} {} ::msgcat::mcset ca {Save GIF on} {} ::msgcat::mcset ca Background {} ::msgcat::mcset ca PolyLines {} ::msgcat::mcset ca {Surfaces Iso} {} ::msgcat::mcset ca Remote {} ::msgcat::mcset ca {Initializing process. Wait, please} {} ::msgcat::mcset ca Connecting {} ::msgcat::mcset ca {Error: Lines mush share one point. Try again} {} ::msgcat::mcset ca {Error in SetGeom::CreateSplineLine. Increase MAXPNTINSPLINE} {} ::msgcat::mcset ca {Calculating. Wait, please} {} ::msgcat::mcset ca {Error: surfaces are of different type.} {} ::msgcat::mcset ca Customize {} ::msgcat::mcset ca {All cuts} {} ::msgcat::mcset ca {Internet Retrieve} {} ::msgcat::mcset ca Others {} ::msgcat::mcset ca {Can't read VDA file: ...Leaving} {} ::msgcat::mcset ca {Errors in surface generation (no surface created)} {} ::msgcat::mcset ca {All graf's linewidths changed to %g pixels.} {} ::msgcat::mcset ca {All Graf's line pattern changed to %x.} {} ::msgcat::mcset ca {All graf's point sizes changed to %g pixels.} {} ::msgcat::mcset ca {Enter new render mode name} {} ::msgcat::mcset ca {Standard bar} {} ::msgcat::mcset ca {Geometry & View bar} {} ::msgcat::mcset ca {Right buttons} {} ::msgcat::mcset ca {Command line} {} ::msgcat::mcset ca {Up menu} {} ::msgcat::mcset ca {Wrong # args: should be 'GiD_EnterInBatch '} {} ::msgcat::mcset ca {Error in tcl comand-> } {} ::msgcat::mcset ca {Initial Pnt} {} ::msgcat::mcset ca {End Pnt} {} ::msgcat::mcset ca {Toolbar %s not found} {} ::msgcat::mcset ca {Reseting normal info} {} ::msgcat::mcset ca {Please, select first one sysinfo} {} ::msgcat::mcset ca {Enter local axes name to delete} {} ::msgcat::mcset ca {Enter local axes name} {} ::msgcat::mcset ca {Leaving delete local axes.} {} ::msgcat::mcset ca {Local axes '%s' does not exists. Try again (ESC to leave)} {} ::msgcat::mcset ca {Deleted local axes '%s'} {} ::msgcat::mcset ca {Deleted one local axes. Leaving} {} ::msgcat::mcset ca {USB key disconnected, changing to ACADEMIC Version.} {} ::msgcat::mcset ca {USB key reconnected, changing to PROFESSIONAL Version.} {} ::msgcat::mcset ca {Sysinfo selection} {} ::msgcat::mcset ca {Select one of the following sysinfos to register GiD} {} ::msgcat::mcset ca {This is the PORTABLE PROFESSIONAL Version.} {} ::msgcat::mcset ca {Bad entity type, cannot sweep.} {} ::msgcat::mcset ca {Enter elements to split} {} ::msgcat::mcset ca {Leaving split elements. Nothing selected} {} ::msgcat::mcset ca {Splitting finished.} {} ::msgcat::mcset ca Figure {} ::msgcat::mcset ca {Splitted %d quadrilaterals, ignored %d elements} {} ::msgcat::mcset ca {Splitted %d quadrilaterals} {} ::msgcat::mcset ca {{Assign} {Close}} {} ::msgcat::mcset ca points {} ::msgcat::mcset ca node {} ::msgcat::mcset ca element {} ::msgcat::mcset ca dimension {} ::msgcat::mcset ca {Warning: This problemtype must be updated for translation} {} ::msgcat::mcset ca Finishing... {} ::msgcat::mcset ca {Sweep finished.} {} ::msgcat::mcset ca Translate#C#geometry {} ::msgcat::mcset ca {Total number of surfaces:} {} ::msgcat::mcset ca {Meshed surface:} {} ::msgcat::mcset ca {Total number of volumes:} {} ::msgcat::mcset ca {Meshed volume:} {} ::msgcat::mcset ca {Smoothing elements...} {} ::msgcat::mcset ca {%d elements smoothed} {} ::msgcat::mcset ca {0 elements smoothed. Boundary nodes can't be moved} {} ::msgcat::mcset ca {0 elements smoothed. Selected elements have enough quality} {} ::msgcat::mcset ca {Selected elements belongs to diferent meshes} {} ::msgcat::mcset ca {Only linear elements can be smoothed} {} ::msgcat::mcset ca {Getting neighbour elements...} {} ::msgcat::mcset ca Percentage: {} ::msgcat::mcset ca {Checking mesh data...} {} ::msgcat::mcset ca {Getting mesh data...} {} ::msgcat::mcset ca {Smoothing elements} {} ::msgcat::mcset ca {Second smoothing} {} ::msgcat::mcset ca {All files} {} ::msgcat::mcset ca {Mesh files} {} ::msgcat::mcset ca {JPEG files} {} ::msgcat::mcset ca {Targa files} {} ::msgcat::mcset ca {GiD mesh ascii} {} ::msgcat::mcset ca {GiD batch} {} ::msgcat::mcset ca {Bad element type, only linear Tetrahedras can be smoothed} {} ::msgcat::mcset ca {Bad element type, only linear Triangles can be smoothed} {} ::msgcat::mcset ca {Bad element type, must be only Triangles or Tetrahedras} {} ::msgcat::mcset ca {value for CMinQuality should be a number} {} ::msgcat::mcset ca {GiD data report} {} ::msgcat::mcset ca {Error: Condition %s with repeated number: %d} {} ::msgcat::mcset ca {Try to set number to: %d} {} ::msgcat::mcset ca {GiD template} {} ::msgcat::mcset ca Output {} ::msgcat::mcset ca {Output data} {} ::msgcat::mcset ca {GiD background mesh} {} ::msgcat::mcset ca Stereolithography {} ::msgcat::mcset ca {GiD postprocess} {} ::msgcat::mcset ca {FEMAP neutral} {} ::msgcat::mcset ca {TECPLOT ascii} {} ::msgcat::mcset ca {Shape quality} {} ::msgcat::mcset ca {Max Size} {} ::msgcat::mcset ca Quality {} ::msgcat::mcset ca {Maximum edge} {} ::msgcat::mcset ca {Smoothing aborted} {} ::msgcat::mcset ca {Unknown command:} {} ::msgcat::mcset ca {Meshing quadratic ContactVolume is only supported for hexahedras} {} ::msgcat::mcset ca {Error, unexpected element degree} {} ::msgcat::mcset ca {Wrong # args: should be \"GiD_FormatReal ?forcewidth|forcewidthnastran?\"} {} ::msgcat::mcset ca {Bad real number %s} {} ::msgcat::mcset ca {Fail GiD_FormatReal} {} ::msgcat::mcset ca {Surface %d, whithout any boundary line} {} ::msgcat::mcset ca {Read iges, time=%d seconds} {} ::msgcat::mcset ca {Error, directory entry %s not valid} {} ::msgcat::mcset ca {Process parameters} {} ::msgcat::mcset ca {unknown command-> } {} ::msgcat::mcset ca {Surface %d, whitout any boundary line} {} ::msgcat::mcset ca {Surface %d whitout contour lines deleted} {} ::msgcat::mcset ca {*SetFormatNastran must be 1st word in line and without espaces before} {} ::msgcat::mcset ca {Surfaces are not in same plane. Try again} {} ::msgcat::mcset ca {Contact volumes only can be meshed with quadratic hexahedral elements} {} ::msgcat::mcset ca {Both sides of the mesh will be created.} {} ::msgcat::mcset ca {Only the choosen side of the mesh will be created.} {} ::msgcat::mcset ca {Now getting the other elements...} {} ::msgcat::mcset ca {Both sides of the set will be created.} {} ::msgcat::mcset ca {Only the choosen side of the set will be created.} {} ::msgcat::mcset ca {Couldn't read %s id list.} {} ::msgcat::mcset ca {Couldn't read step value.} {} ::msgcat::mcset ca {Couldn't read analysis type.} {} ::msgcat::mcset ca {Couldn't read set title.} {} ::msgcat::mcset ca {Couldn't read data_type.} {} ::msgcat::mcset ca {Couldn't read output type.} {} ::msgcat::mcset ca {Couldn't read components.} {} ::msgcat::mcset ca {Couldn't read direction.} {} ::msgcat::mcset ca {Couldn't read calc_warning.} {} ::msgcat::mcset ca {Couldn't read min_id.} {} ::msgcat::mcset ca {Couldn't read max_id.} {} ::msgcat::mcset ca {Couldn't read min value.} {} ::msgcat::mcset ca {Couldn't read max value.} {} ::msgcat::mcset ca {Couldn't read title.} {} ::msgcat::mcset ca {Can not handle components distribution: %d %d %d %d %d %d %d %d.} {} ::msgcat::mcset ca {Couldn't read data list.} {} ::msgcat::mcset ca {Couldn't read function type.} {} ::msgcat::mcset ca {Couldn't read xy data list.} {} ::msgcat::mcset ca {Invalid FEMAP binary file.} {} ::msgcat::mcset ca {Couldn't read record header.} {} ::msgcat::mcset ca nodes {} ::msgcat::mcset ca elements {} ::msgcat::mcset ca {Unknown record type.} {} ::msgcat::mcset ca {Reading record '%d'} {} ::msgcat::mcset ca {Please select a JPEG/BMP/PPM file.} {} ::msgcat::mcset ca {Read Background Image (JPEG/BMP/PPM)} {} ::msgcat::mcset ca {DataBehaviour only implemented on materials and %s was requested} {} ::msgcat::mcset ca {FEMAP file} {} ::msgcat::mcset ca {Short list} {} ::msgcat::mcset ca {invalid entity type '%s' in %s: sould be '%s'} {} ::msgcat::mcset ca {invalid cmd '%s' in DataBehaviour::Materials: should be '%s'} {} ::msgcat::mcset ca {invalid property '%s' in DataBehaviour::Materials: should be '%s'} {} ::msgcat::mcset ca {invalid cmd '%s' in DataBehaviour::Conditions: should be 'enable or disable'} {} ::msgcat::mcset ca {invalid property '%s' in DataBehaviour::Conditions: should be '%s'} {} ::msgcat::mcset ca {wrong # of arguments: should be 'GiD_DataBehaviour data_class name ?cmd? proplist'} {} ::msgcat::mcset ca {invalid book name '%s': should be not empty} {} ::msgcat::mcset ca {invalid DataBehaviour request on unknown data type '%s': should be 'condition, conditions, material or materials'} {} ::msgcat::mcset ca {wrong # of arguments: should be 'GiD_ConditionBehaviour name \[property | cmd property\]'} {}