/*-
 * See the file LICENSE for redistribution information.
 *
 * Copyright (c) 1996-2002
 *	Sleepycat Software.  All rights reserved.
 *
 * $Id: hash.src,v 1.1.1.1 2003/02/15 04:56:06 zarzycki Exp $
 */
/*
 * Copyright (c) 1995, 1996
 *	Margo Seltzer.  All rights reserved.
 */
/*
 * Copyright (c) 1995, 1996
 *	The President and Fellows of Harvard University.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Margo Seltzer.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

PREFIX	__ham
DBPRIVATE

INCLUDE	#include "db_config.h"
INCLUDE
INCLUDE #ifndef NO_SYSTEM_INCLUDES
INCLUDE #include <sys/types.h>
INCLUDE
INCLUDE #include <ctype.h>
INCLUDE #include <string.h>
INCLUDE #endif
INCLUDE
INCLUDE #include "db_int.h"
INCLUDE #include "dbinc/crypto.h"
INCLUDE #include "dbinc/db_page.h"
INCLUDE #include "dbinc/db_dispatch.h"
INCLUDE #include "dbinc/db_am.h"
INCLUDE #include "dbinc/hash.h"
INCLUDE #include "dbinc/rep.h"
INCLUDE #include "dbinc/log.h"
INCLUDE #include "dbinc/txn.h"
INCLUDE

/*
 * HASH-insdel: used for hash to insert/delete a pair of entries onto a master
 * page. The pair might be regular key/data pairs or they might be the
 * structures that refer to off page items, duplicates or offpage duplicates.
 *  opcode - PUTPAIR/DELPAIR + big masks
 *  fileid - identifies the file referenced
 *  pgno - page within file
 *  ndx - index on the page of the item being added (item index)
 *  pagelsn - lsn on the page before the update
 *  key - the key being inserted
 *  data - the data being inserted
 */
BEGIN insdel		21
ARG	opcode		u_int32_t	lu
DB	fileid		int32_t		ld
WRLOCK	pgno		db_pgno_t	lu
ARG	ndx		u_int32_t	lu
POINTER	pagelsn		DB_LSN *	lu
DBT	key		DBT		s
DBT	data		DBT		s
END

/*
 * Used to add and remove overflow pages.
 * prev_pgno is the previous page that is going to get modified to
 *	point to this one.  If this is the first page in a chain
 *	then prev_pgno should be PGNO_INVALID.
 * new_pgno is the page being allocated.
 * next_pgno is the page that follows this one.  On allocation,
 *	this should be PGNO_INVALID.  For deletes, it may exist.
 * pagelsn is the old lsn on the page.
 */
BEGIN newpage		22
ARG	opcode		u_int32_t	lu
DB	fileid		int32_t		ld
WRLOCKNZ prev_pgno	db_pgno_t	lu
POINTER	prevlsn		DB_LSN *	lu
WRLOCKNZ new_pgno	db_pgno_t	lu
POINTER	pagelsn		DB_LSN *	lu
WRLOCKNZ next_pgno	db_pgno_t	lu
POINTER	nextlsn		DB_LSN *	lu
END

/*
 * Splitting requires two types of log messages.  The second logs the
 * data on the original page.  To redo the split, we have to visit the
 * new page (pages) and add the items back on the page if they are not
 * yet there.
 */
BEGIN splitdata		24
DB	fileid		int32_t		ld
ARG	opcode		u_int32_t	lu
WRLOCK	pgno		db_pgno_t	lu
PGDBT	pageimage	DBT		s
POINTER	pagelsn		DB_LSN *	lu
END

/*
 * HASH-replace: is used for hash to handle partial puts that only
 * affect a single master page.
 *  fileid - identifies the file referenced
 *  pgno - page within file
 *  ndx - index on the page of the item being modified (item index)
 *  pagelsn - lsn on the page before the update
 *  off - offset in the old item where the new item is going.
 *  olditem - DBT that describes the part of the item being replaced.
 *  newitem - DBT of the new item.
 *  makedup - this was a replacement that made an item a duplicate.
 */
BEGIN replace		25
DB	fileid		int32_t		ld
WRLOCK	pgno		db_pgno_t	lu
ARG	ndx		u_int32_t	lu
POINTER	pagelsn		DB_LSN *	lu
ARG	off		int32_t		ld
DBT	olditem		DBT		s
DBT	newitem		DBT		s
ARG	makedup		u_int32_t	lu
END

/*
 * Used when we empty the first page in a bucket and there are pages after
 * it.  The page after it gets copied into the bucket page (since bucket
 * pages have to be in fixed locations).
 * pgno: the bucket page
 * pagelsn: the old LSN on the bucket page
 * next_pgno: the page number of the next page
 * nnext_pgno: page after next_pgno (may need to change its prev)
 * nnextlsn: the LSN of nnext_pgno.
 */
BEGIN copypage		28
DB	fileid		int32_t		ld
WRLOCK	pgno		db_pgno_t	lu
POINTER	pagelsn		DB_LSN *	lu
WRLOCK	next_pgno	db_pgno_t	lu
POINTER	nextlsn		DB_LSN *	lu
WRLOCKNZ nnext_pgno	db_pgno_t	lu
POINTER	nnextlsn	DB_LSN *	lu
PGDBT	page		DBT		s
END

/*
 * This record logs the meta-data aspects of a split operation.  It has enough
 * information so that we can record both an individual page allocation as well
 * as a group allocation which we do because in sub databases, the pages in
 * a hash doubling, must be contiguous.  If we do a group allocation, the
 * number of pages allocated is bucket + 1, pgno is the page number of the
 * first newly allocated bucket.
 *
 * bucket:	Old maximum bucket number.
 * mmpgno:	Master meta-data page number (0 if same as mpgno).
 * mmetalsn:	Lsn of the master meta-data page.
 * mpgno:	Meta-data page number.
 * metalsn:	Lsn of the meta-data page.
 * pgno:	Page allocated to bucket + 1 (first newly allocated page)
 * pagelsn:	Lsn of either the first page allocated (if newalloc == 0) or
 *		the last page allocated (if newalloc == 1).
 * newalloc:	1 indicates that this record did the actual allocation;
 *		0 indicates that the pages were already allocated from a
 *		previous (failed) allocation.
 */
BEGIN metagroup		29
DB	fileid		int32_t		ld
ARG	bucket		u_int32_t	lu
WRLOCK  mmpgno		db_pgno_t	lu
POINTER	mmetalsn	DB_LSN *	lu
WRLOCKNZ mpgno		db_pgno_t	lu
POINTER	metalsn		DB_LSN *	lu
WRLOCK	pgno		db_pgno_t	lu
POINTER	pagelsn		DB_LSN *	lu
ARG	newalloc	u_int32_t	lu
END

/*
 * groupalloc
 *
 * This is used in conjunction with MPOOL_NEW_GROUP when we are creating
 * a new database to make sure that we recreate or reclaim free pages
 * when we allocate a chunk of contiguous ones during database creation.
 *
 * pgno: meta-data page number
 * metalsn: meta-data lsn
 * start_pgno: starting page number
 * num: number of allocated pages
 */
BEGIN groupalloc	32
DB	fileid		int32_t		ld
POINTER	meta_lsn	DB_LSN *	lu
WRLOCK	start_pgno	db_pgno_t	lu
ARG	num		u_int32_t	lu
ARG	free		db_pgno_t	lu
END

/*
 * Records for backing out cursor adjustment.
 *   curadj - added or deleted a record or a dup
 *	within a record.
 *	pgno	- page that was effected
 *	indx	- indx of recrod effected.
 *	len	- if a dup its length.
 *	dup_off	- if a dup its offset
 *	add	- 1 if add 0 if delete
 *	is_dup  - 1 if dup 0 otherwise.
 *	order	- order assigned to this deleted record or dup.
 *
 *   chgpg - rmoved a page, move the records to a new page
 *	mode	- CHGPG page was deleted or records move to new page.
 *		- SPLIT we split a bucket
 *		- DUP we convered to off page duplicates.
 *	old_pgno, new_pgno - old and new page numbers.
 *	old_index, new_index - old and new index numbers, NDX_INVALID if
 *		it effects all records on the page.
 *		For three opcodes new in 3.3 (DB_HAM_DELFIRSTPG, DELMIDPG,
 *		and DELLASTPG), we overload old_indx and new_indx to avoid
 *		needing a new log record type:  old_indx stores the only
 *		indx of interest to these records, and new_indx stores the
 *		order that's assigned to the lowest deleted record we're
 *		moving.
 */
BEGIN curadj	33
DB	fileid		int32_t		ld
ARG	pgno		db_pgno_t	lu
ARG	indx		u_int32_t	lu
ARG	len		u_int32_t	lu
ARG	dup_off		u_int32_t	lu
ARG	add		int		ld
ARG	is_dup		int		ld
ARG	order		u_int32_t	lu
END

BEGIN chgpg	34
DB	fileid		int32_t		ld
ARG	mode		db_ham_mode	ld
ARG	old_pgno	db_pgno_t	lu
ARG	new_pgno	db_pgno_t	lu
ARG	old_indx	u_int32_t	lu
ARG	new_indx	u_int32_t	lu
END

