NAME
    Config::IniFiles - A module for reading .ini-style configuration files.

SYNOPSIS
      use Config::IniFiles;
      my $cfg = new Config::IniFiles( -file => "/path/configfile.ini" );
      print "The value is " . $cfg->val( 'Section', 'Parameter' ) . "."
            if $cfg->val( 'Section', 'Parameter' );

DESCRIPTION
    Config::IniFiles provides a way to have readable configuration files
    outside your Perl script. Configurations can be imported (inherited,
    stacked,...), sections can be grouped, and settings can be accessed from
    a tied hash.

FILE FORMAT
    INI files consist of a number of sections, each preceded with the
    section name in square brackets. The first non-blank character of the
    line indicating a section must be a left bracket and the last non-blank
    character of a line indicating a section must be a right bracket. The
    characters making up the section name can be any symbols at all. However
    section names must be unique.

    Parameters are specified in each section as Name=Value. Any spaces
    around the equals sign will be ignored, and the value extends to the end
    of the line. Parameter names are localized to the namespace of the
    section, but must be unique within a section.

      [section]
      Parameter=Value

    Both the hash mark (#) and the semicolon (;) are comment characters. by
    default (this can be changed by configuration) Lines that begin with
    either of these characters will be ignored. Any amount of whitespace may
    precede the comment character.

    Multi-line or multi-valued parameters may also be defined ala UNIX "here
    document" syntax:

      Parameter=<<EOT
      value/line 1
      value/line 2
      EOT

    You may use any string you want in place of "EOT". Note that what
    follows the "<<" and what appears at the end of the text MUST match
    exactly, including any trailing whitespace.

    As a configuration option (default is off), continuation lines can be
    allowed:

      [Section]
      Parameter=this parameter \
        spreads across \
        a few lines

USAGE -- Object Interface
    Get a new Config::IniFiles object with the *new* method:

      $cfg = Config::IniFiles->new( -file => "/path/configfile.ini" );
      $cfg = new Config::IniFiles -file => "/path/configfile.ini";

    Optional named parameters may be specified after the configuration file
    name. See the *new* in the METHODS section, below.

    Values from the config file are fetched with the val method:

      $value = $cfg->val('Section', 'Parameter');

    If you want a multi-line/value field returned as an array, just specify
    an array as the receiver:

      @values = $cfg->val('Section', 'Parameter');

METHODS
  new ( [-option=>value ...] )

    Returns a new configuration object (or "undef" if the configuration file
    has an error). One Config::IniFiles object is required per configuration
    file. The following named parameters are available:

    *-file* filename
              Specifies a file to load the parameters from. This 'file' may
              actually be any of the following things:

                1) a simple filehandle, such as STDIN
                2) a filehandle glob, such as *CONFIG
                3) a reference to a glob, such as \*CONFIG
                4) an IO::File object
                5) the pathname of a file

              If this option is not specified, (i.e. you are creating a
              config file from scratch) you must specify a target file using
              SetFileName in order to save the parameters.

    *-default* section
              Specifies a section to be used for default values. For
              example, if you look up the "permissions" parameter in the
              "users" section, but there is none, Config::IniFiles will look
              to your default section for a "permissions" value before
              returning undef.

    *-reloadwarn* 0|1
              Set -reloadwarn => 1 to enable a warning message (output to
              STDERR) whenever the config file is reloaded. The reload
              message is of the form:

                PID <PID> reloading config file <file> at YYYY.MM.DD HH:MM:SS

              Default behavior is to not warn (i.e. -reloadwarn => 0).

    *-nocase* 0|1
              Set -nocase => 1 to handle the config file in a
              case-insensitive manner (case in values is preserved,
              however). By default, config files are case-sensitive (i.e., a
              section named 'Test' is not the same as a section named
              'test'). Note that there is an added overhead for turning off
              case sensitivity.

    *-allowcontinue* 0|1
              Set -allowcontinue => 1 to enable continuation lines in the
              config file. i.e. if a line ends with a backslash "\", then
              the following line is appended to the parameter value,
              dropping the backslash and the newline character(s).

              Default behavior is to keep a trailing backslash "\" as a
              parameter value. Note that continuation cannot be mixed with
              the "here" value syntax.

    *-import* object
              This allows you to import or inherit existing setting from
              another Config::IniFiles object. When importing settings from
              another object, sections with the same name will be merged and
              parameters that are defined in both the imported object and
              the *-file* will take the value of given in the *-file*.

              If a *-default* section is also given on this call, and it
              does not coincide with the default of the imported object, the
              new default section will be used instead. If no *-default*
              section is given, then the default of the imported object will
              be used.

    *-commentchar* 'char'
              The default comment character is "#". You may change this by
              specifying this option to an arbitrary character, except
              alphanumeric characters and square brackets and the "equal"
              sign.

    *-allowedcommentchars* 'chars'
              Allowed default comment characters are "#" and ";". By
              specifying this option you may enlarge or narrow this range to
              a set of characters (concatenating them to a string). Note
              that the character specified by -commentchar (see above) is
              always part of the allowed comment characters. Note: The given
              string is evaluated as a character class (i.e.: like
              "/[chars]/").
    
    *-allowcode* 0|1
              Set -allowcode => 1 allows to use perl hooks within an ini 
              configuration file. Such perl hooks enable you to call a perl 
              sub or to access an environment variable within an ini 
              file to set a parameter:
                
                [EXAMPLE]
                logfile1=sub{ $ENV{'LOGFILE'}; }
                logfile2=sub{ logfile(); }
                heredoc=<<EOT
                sub{ $ENV{'LOGFILE'}; }
                sub{ logfile(); }
                <<EOT
                
              Default behaviour is to allow perl code.
              
  val ($section, $parameter [, $default] )

    Returns the value of the specified parameter ("$parameter") in section
    "$section", returns undef (or "$default" if specified) if no section or
    no parameter for the given section section exists.

    If you want a multi-line/value field returned as an array, just specify
    an array as the receiver:

      @values = $cfg->val('Section', 'Parameter');

    A multi-line/value field that is returned in a scalar context will be
    joined using $/ (input record separator, default is \n) if defined,
    otherwise the values will be joined using \n.

  setval ($section, $parameter, $value, [ $value2, ... ])

    Sets the value of parameter "$parameter" in section "$section" to
    "$value" (or to a set of values). See below for methods to write the new
    configuration back out to a file.

    You may not set a parameter that didn't exist in the original
    configuration file. setval will return *undef* if this is attempted. See
    newval below to do this. Otherwise, it returns 1.

  newval($section, $parameter, $value [, $value2, ...])

    Assignes a new value, "$value" (or set of values) to the parameter
    "$parameter" in section "$section" in the configuration file.

  delval($section, $parameter)

    Deletes the specified parameter from the configuration file

  ReadConfig

    Forces the configuration file to be re-read. Returns undef if the file
    can not be opened, no filename was defined (with the "-file" option)
    when the object was constructed, or an error occurred while reading.

    If an error occurs while parsing the INI file the
    @Config::IniFiles::errors array will contain messages that might help
    you figure out where the problem is in the file.

  Sections

    Returns an array containing section names in the configuration file. If
    the *nocase* option was turned on when the config object was created,
    the section names will be returned in lowercase.

  SectionExists ( $sect_name )

    Returns 1 if the specified section exists in the INI file, 0 otherwise
    (undefined if section_name is not defined).

  AddSection ( $sect_name )

    Ensures that the named section exists in the INI file. If the section
    already exists, nothing is done. In this case, the "new" section will
    possibly contain data already.

    If you really need to have a new section with no parameters in it, check
    that the name that you're adding isn't in the list of sections already.

  DeleteSection ( $sect_name )

    Completely removes the entire section from the configuration.

  Parameters ($sect_name)

    Returns an array containing the parameters contained in the specified
    section.

  Groups

    Returns an array containing the names of available groups.

    Groups are specified in the config file as new sections of the form

      [GroupName MemberName]

    This is useful for building up lists. Note that parameters within a
    "member" section are referenced normally (i.e., the section name is
    still "Groupname Membername", including the space) - the concept of
    Groups is to aid people building more complex configuration files.

  SetGroupMember ( $sect )

    Makes sure that the specified section is a member of the appropriate
    group.

    Only intended for use in newval.

  RemoveGroupMember ( $sect )

    Makes sure that the specified section is no longer a member of the
    appropriate group. Only intended for use in DeleteSection.

  GroupMembers ($group)

    Returns an array containing the members of specified $group. Each
    element of the array is a section name. For example, given the sections

      [Group Element 1]
      ...

      [Group Element 2]
      ...

    GroupMembers would return ("Group Element 1", "Group Element 2").

  SetWriteMode ($mode)

    Sets the mode (permissions) to use when writing the INI file.

    $mode must be a string representation of the octal mode.

  GetWriteMode ($mode)

    Gets the current mode (permissions) to use when writing the INI file.

    $mode is a string representation of the octal mode.

  WriteConfig ($filename)

    Writes out a new copy of the configuration file. A temporary file
    (ending in '-new') is written out and then renamed to the specified
    filename. Also see BUGS below.

    Returns true on success, "undef" on failure.

  RewriteConfig

    Same as WriteConfig, but specifies that the original configuration file
    should be rewritten.

  GetFileName

    Returns the filename associated with this INI file.

    If no filename has been specified, returns undef.

  SetFileName ($filename)

    If you created the Config::IniFiles object without initialising from a
    file, or if you just want to change the name of the file to use for
    ReadConfig/RewriteConfig from now on, use this method.

    Returns $filename if that was a valid name, undef otherwise.

  SetSectionComment($section, @comment)

    Sets the comment for section $section to the lines contained in
    @comment.

    Each comment line will be prepended with the comment charcter (default
    is "#") if it doesn't already have a comment character (ie: if the line
    does not start with whitespace followed by an allowed comment character,
    default is "#" and ";").

    To clear a section comment, use DeleteSectionComment ($section)

  GetSectionComment ($section)

    Returns a list of lines, being the comment attached to section $section.
    In scalar context, returns a string containing the lines of the comment
    separated by newlines.

    The lines are presented as-is, with whatever comment character was
    originally used on that line.

  DeleteSectionComment ($section)

    Removes the comment for the specified section.

  SetParameterComment ($section, $parameter, @comment)

    Sets the comment attached to a particular parameter.

    Any line of @comment that does not have a comment character will be
    prepended with one. See the SetSectionComment($section, @comment) entry
    elsewhere in this document above

  GetParameterComment ($section, $parameter)

    Gets the comment attached to a parameter.

  DeleteParameterComment ($section, $parmeter)

    Deletes the comment attached to a parameter.

  GetParameterEOT ($section, $parameter)

    Accessor method for the EOT text (in fact, style) of the specified
    parameter. If any text is used as an EOT mark, this will be returned. If
    the parameter was not recorded using HERE style multiple lines,
    GetParameterEOT returns undef.

  SetParameterEOT ($section, $EOT)

    Accessor method for the EOT text for the specified parameter. Sets the
    HERE style marker text to the value $EOT. Once the EOT text is set, that
    parameter will be saved in HERE style.

    To un-set the EOT text, use DeleteParameterEOT ($section, $parameter).

  DeleteParameterEOT ($section, $parmeter)

    Removes the EOT marker for the given section and parameter. When writing
    a configuration file, if no EOT marker is defined then "EOT" is used.

  Delete

    Deletes the entire configuration file in memory.

USAGE -- Tied Hash
  tie %ini, 'Config::IniFiles', (-file=>$filename, [-option=>value ...] )

    Using "tie", you can tie a hash to a Config::IniFiles object. This
    creates a new object which you can access through your hash, so you use
    this instead of the new method. This actually creates a hash of hashes
    to access the values in the INI file. The options you provide through
    "tie" are the same as given for the new method, above.

    Here's an example:

      use Config::IniFiles;
  
      my %ini
      tie %ini, 'Config::IniFiles', ( -file => "/path/configfile.ini" );

      print "We have $ini{Section}{Parameter}." if $ini{Section}{Parameter};

    Accessing and using the hash works just like accessing a regular hash
    and many of the object methods are made available through the hash
    interface.

    For those methods that do not coincide with the hash paradigm, you can
    use the Perl "tied" function to get at the underlying object tied to the
    hash and call methods on that object. For example, to write the hash out
    to a new ini file, you would do something like this:

      tied( %ini )->WriteConfig( "/newpath/newconfig.ini" ) ||
        die "Could not write settings to new file.";

  $val = $ini{$section}{$parameter}

    Returns the value of $parameter in $section.

    Because of limitations in Perl's tie implementation, multiline values
    accessed through a hash will *always* be returned as a single value with
    each line joined by the default line separator ($\). To break them apart
    you can simple do this:

      @lines = split( "$\", $ini{section}{multi_line_parameter} );

  $ini{$section}{$parameter} = $value;

    Sets the value of "$parameter" in "$section" to "$value".

    To set a multiline or multiv-alue parameter just assign an array
    reference to the hash entry, like this:

     $ini{$section}{$parameter} = [$value1, $value2, ...];

    If the parameter did not exist in the original file, it will be created.
    However, Perl does not seem to extend autovivification to tied hashes.
    That means that if you try to say

      $ini{new_section}{new_paramters} = $val;

    and the section 'new_section' does not exist, then Perl won't properly
    create it. In order to work around this you will need to create a hash
    reference in that section and then assign the parameter value. Something
    like this should do nicely:

      $ini{new_section} = {};
      $ini{new_section}{new_paramters} = $val;

  %hash = %{$ini{$section}}

    Using the tie interface, you can copy whole sections of the ini file
    into another hash. Note that this makes a copy of the entire section.
    The new hash in no longer tied to the ini file, In particular, this
    means -default and -nocase settings will not apply to "%hash".

  $ini{$section} = {}; %{$ini{$section}} = %parameters;

    Through the hash interface, you have the ability to replace the entire
    section with a new set of parameters. This call will fail, however, if
    the argument passed in NOT a hash reference. You must use both lines, as
    shown above so that Perl recognizes the section as a hash reference
    context before COPYing over the values from your "%parameters" hash.

  delete $ini{$section}{$parameter}

    When tied to a hash, you can use the Perl "delete" function to
    completely remove a parameter from a section.

  delete $ini{$section}

    The tied interface also allows you to delete an entire section from the
    ini file using the Perl "delete" function.

  %ini = ();

    If you really want to delete all the items in the ini file, this will do
    it. Of course, the changes won't be written to the actual file unless
    you call RewriteConfig on the object tied to the hash.

  Parameter names

    my @keys = keys %{$ini{$section}}
    while (($k, $v) = each %{$ini{$section}}) {...}
    if( exists %{$ini{$section}}, $parameter ) {...}
    When tied to a hash, you use the Perl "keys" and "each" functions to
    iteratively list the parameters ("keys") or parameters and their values
    ("each") in a given section.

    You can also use the Perl "exists" function to see if a parameter is
    defined in a given section.

    Note that none of these will return parameter names that are part if the
    default section (if set), although accessing an unknown parameter in the
    specified section will return a value from the default section if there
    is one.

  Section names

    foreach( keys %ini ) {...}
    while (($k, $v) = each %ini) {...}
    if( exists %ini, $section ) {...}
    When tied to a hash, you use the Perl "keys" and "each" functions to
    iteratively list the sections in the ini file.

    You can also use the Perl "exists" function to see if a section is
    defined in the file.

DIAGNOSTICS
  @Config::IniFiles::errors

    Contains a list of errors encountered while parsing the configuration
    file. If the *new* method returns undef, check the value of this to find
    out what's wrong. This value is reset each time a config file is read.

BUGS
    *  The output from [Re]WriteConfig/OutputConfig might not be as pretty
       as it can be. Comments are tied to whatever was immediately below
       them. And case is not preserved for Section and Parameter names if
       the -nocase option was used.

    *  No locking is done by [Re]WriteConfig. When writing servers, take
       care that only the parent ever calls this, and consider making your
       own backup.

Data Structure
    Note that this is only a reference for the package maintainers - one of
    the upcoming revisions to this package will include a total clean up of
    the data structure.

      $iniconf->{cf} = "config_file_name"
              ->{startup_settings} = \%orginal_object_parameters
              ->{firstload} = 0
              ->{nocase} = 0
              ->{reloadwarn} = 0
              ->{sects} = \@sections
              ->{sCMT}{$sect} = \@comment_lines
              ->{group}{$group} = \@group_members
              ->{parms}{$sect} = \@section_parms
              ->{EOT}{$sect}{$parm} = "end of text string"
              ->{pCMT}{$sect}{$parm} = \@comment_lines
              ->{v}{$sect}{$parm} = $value   OR  \@values

AUTHOR and ACKNOWLEDGEMENTS
    The original code was written by Scott Hutton. Then handled for a time
    by Rich Bowen (thanks!), It is now managed by Jeremy Wadsack, with many
    contributions from various other people.

    In particular, special thanks go to (in roughly chronological order):

    Bernie Cosell, Alan Young, Alex Satrapa, Mike Blazer, Wilbert van de
    Pieterman, Steve Campbell, Robert Konigsberg, Scott Dellinger, R.
    Bernstein, Daniel Winkelmann, Pires Claudio, Adrian Phillips, Marek
    Rouchal, Luc St Louis, Adam Fischler, Kay Röpke, Matt Wilson, Raviraj
    Murdeshwar and Slaven Rezic, Florian Pfaff

    Geez, that's a lot of people. And apologies to the folks who were
    missed.

    If you want someone to bug about this, that would be:

            Jeremy Wadsack <dgsupport at wadsack-allen dot com>

    If you want more information, or want to participate, go to:

            http://sourceforge.net/projects/config-inifiles/

    Please send bug reports to config-inifiles-bugs@lists.sourceforge.net

    Development discussion occurs on the mailing list
    config-inifiles-dev@lists.sourceforge.net, which you can subscribe to by
    going to the project web site (link above).

    This program is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself.

Change log
         $Log: README,v $
         Revision 1.18  2003/05/14 01:32:02  wadg
         update for distribution

         Revision 2.38  2003/05/14 01:30:32  wadg
         - fixed RewriteConfig and ReadConfig to work with open file handles
         - added a test to ensure that blank files throw no warnings
         - added a test for error messages from malformed lines

         Revision 2.37  2003/01/31 23:00:35  wadg
         Updated t/07misc test 4 to remove warning

         Revision 2.36  2002/12/18 01:43:11  wadg
         - Improved error message when an invalid line is encountered in INI file
         - Fixed bug 649220; importing a non-file-based object into a file one
           no longer destroys the original object

         Revision 2.33  2002/11/12 14:48:16  grail
         Addresses feature request - [ 403496 ] A simple change will allow support on more platforms

         Revision 2.32  2002/11/12 14:15:44  grail
         Addresses bug - [225971] Respect Read-Only Permissions of File System

         Revision 2.31  2002/10/29 01:45:47  grail
         [ 540867 ] Add GetFileName method

         Revision 2.30  2002/10/15 18:51:07  wadg
         Patched to stopwarnings about utf8 usage.

         Revision 2.29  2002/08/15 21:33:58  wadg
         - Support for UTF Byte-Order-Mark (Raviraj Murdeshwar)
         - Made tests portable to Mac (p. kent)
         - Made file parsing portable for s390/EBCDIC, etc. (Adam Fischler)
         - Fixed import bug with Perl 5.8.0 (Marek Rouchal)
         - Fixed precedence bug in WriteConfig (Luc St Louis)
         - Fixed broken group detection in SetGroupMember and RemoveGroupMember (Kay Röpke)
         - Added line continuation character (/) support (Marek Rouchal)
         - Added configurable comment character support (Marek Rouchal)

         Revision 2.28  2002/07/04 03:56:05  grail
         Changes for resolving bug 447532 - _section::FETCH should return array ref for multiline values.

         Revision 2.27  2001/12/20 16:03:49  wadg
         - Fixed bug introduced in new valid file check where ';' comments in first lines were not considered valid
         - Rearranged some tests to put them in the proper files (case and -default)
         - Added more comment test to cover more cases
         - Fixed first two comments tests which weren't doing anything

         Revision 2.26  2001/12/19 22:20:50  wadg
         #481513 Recognize badly formatted files

         Revision 2.25  2001/12/12 20:44:48  wadg
         Update to bring CVS version in synch

         Revision 2.24  2001/12/07 10:03:06  wadg
         222444 Ability to load from arbitrary source

         Revision 2.23  2001/12/07 09:35:06  wadg
         Forgot to include updates t/test.ini

         Revision 2.22  2001/12/06 16:52:39  wadg
         Fixed bugs 482353,233372. Updated doc for new mgr.

         Revision 2.21  2001/08/14 01:49:06  wadg
         Bug fix: multiple blank lines counted as one
         Patched README change log to include recent updates

         Revision 2.20  2001/06/07 02:49:52  grail
          - Added checks for method parameters being defined
          - fixed some regexes to make them stricter
          - Fixed greps to make them consistent through the code (also a vain
            attempt to help my editors do syntax colouring properly)
          - Added AddSection method, replaced chunk of ReadConfig with AddSection
          - Added case handling stuff to more methods
          - Added RemoveGroupMember
          - Made variable names more consistent through OO methods
          - Restored Unix EOLs

         Revision 2.19  2001/04/04 23:33:40  wadg
         Fixed case sensitivity bug

         Revision 2.18  2001/03/30 04:41:08  rbowen
         Small documentation change in IniFiles.pm - pod2* was choking on misplaces
         =item tags. And I regenerated the README
         The main reason for this release is that the MANIFEST in the 2.17 version was
         missing one of the new test suite files, and that is included in this
         re-release.

         Revision 2.17  2001/03/21 21:05:12  wadg
         Documentation edits

         Revision 2.16  2001/03/21 19:59:09 wadg
         410327 -default not in original; 233255 substring parameters

         Revision 2.15  2001/01/30 11:46:48  rbowen
         Very minor documentation bug fixed.

         Revision 2.14  2001/01/08 18:02:32  wadg
         [Bug #127325] Fixed proken import; changelog; moved

         Revision 2.13  2000/12/18 07:14:41  wadg
         [Bugs# 122441,122437] Alien EOLs and OO delete method

         Revision 2.12  2000/12/18 04:59:37  wadg
         [Bug #125524] Writing multiline of 2 with tied hash

         Revision 2.11  2000/12/16 12:53:13  grail
         [BUG #122455] Problem with File Permissions

         Revision 2.10  2000/12/13 17:40:18  rbowen
         Updated version number so that CPAN will stop being angry with us.

         Revision 1.18  2000/12/08 00:45:35  grail
         Change as requested by Jeremy Wadsack, for Bug 123146

         Revision 1.17  2000/12/07 15:32:36  grail
         Further patch to duplicate sections bug, and replacement of repeated values handling code.

         Revision 1.14  2000/11/29 11:26:03  grail
         Updates for task 22401 (no more reloadsig) and 22402 (Group and GroupMember doco)

         Revision 1.13  2000/11/28 12:41:42  grail
         Added test for being able to add sections with wierd names like section|version2

         Revision 1.11  2000/11/24 21:20:11  rbowen
         Resolved SourceForge bug #122445 - a parameter should be split from its value on the first = sign encountered, not on the last one. Added test suite to test this, and put test case in test.ini

         Revision 1.10  2000/11/24 20:40:58  rbowen
         Updated MANIFEST to have file list of new files in t/
         Updated IniFiles.pm to have mention of sourceforge addresses, rather than rcbowen.com addresses
         Regenerated README from IniFiles.pm

         Revision 1.9  2000/11/23 05:08:08  grail
         Fixed documentation for bug 122443 - Check that INI files can be created from scratch.

         Revision 1.1.1.1  2000/11/10 03:04:01  rbowen
         Initial checkin of the Config::IniFiles source to SourceForge

         Revision 1.8  2000/10/17 01:52:55  rbowen
         Patch from Jeremy. Fixed "defined" warnings.

         Revision 1.7  2000/09/21 11:19:17  rbowen
         Mostly documentation changes. I moved the change log into the POD rather
         than having it in a separate Changes file. This allows people to see the
         changes in the Readme before they download the module. Now I just
         need to make sure I remember to regenerate the Readme every time I do
         a commit.

         1.6 September 19, 2000 by JW, AS
         * Applied several patches submitted to me by Jeremy and Alex.
         * Changed version number to the CVS version number, so that I won't
         have to think about changing it ever again. Big version change
         should not be taken as a huge leap forward.

         0.12 September 13, 2000 by JW/WADG
         * Added documentation to clarify autovivification issues when 
         creating new sections
         * Fixed version number (Oops!)

         0.11 September 13, 2000 by JW/WADG
         * Applied patch to Group and GroupMembers functions to return empty
         list when no groups are present (submitted by John Bass, Sep 13)

         0.10 September 13, 2000 by JW/WADG
         * Fixed reference in POD to ReWriteFile. changes to RewriteConfig
         * Applied patch for failed open bug submitted by Mordechai T. Abzug Aug 18
         * Doc'd behavior of failed open
         * Removed planned SIG testing from test.pl as SIGs have been removed
         * Applied patch from Thibault Deflers to fix bug in parameter list
         when a parameter value is undef

         0.09
         Hey! Where's the change log for 0.09?

         0.08
         2000-07-30  Adrian Phillips  <adrianp@powertech.no>
 
         * test.pl: Fixed some tests which use $\, and made those that try
         to check a non existant val check against ! defined.

         * IniFiles.pm: hopefully fixed use of $\ when this is unset
         (problems found when running tests with -w).  Similar problem with
         $/ which can be undefined and trying to return a val which does
         not exist. Modified val docs section to indicate a undef return
         when this occurs.

         0.07
         Looks like we missed a change log for 0.07. Bummer.

         0.06 Sun Jun 25, 2000 by Daniel Winkelmann
         * Patch for uninitialized value bug in newval and setval
     
         0.05 Sun Jun 18, 2000 by RBOW
         * Added something to shut up -w on VERSIONS
         * Removed unused variables

         0.04 Thu Jun 15 - Fri Jun 16, 2000 by JW/WADG
         * Added support for -import option on ->new
         * Added support for tying a hash
         * Edited POD for grammer, clarity and updates
         * Updated test.pl file
         * Fixed bug in multiline/single line output
         * Fixed bug in default handling with tie interface
         * Added bugs to test.pl for regression
         * Fixed bug in {group} vs. {groups} property (first is valid)
         * Fixed return value for empty {sects} or {parms}{$sect} in
         Sections and Parameters methods

         0.03 Thu Jun 15, 2000 by RBOW
         * Modifications to permit 'use strict', and to get 'make test' working
         again.

         0.02 Tue Jun 13, 2000 by RBOW
         * Fixed bug reported by Bernie Cosell - Sections, Parameters, 
         and GroupMembers return undef if there are no sections,
         parameters, or group members. These functions now return
         () if the particular value is undefined.
         * Added some contributed documentation, from Alex Satrapa, explaining
         how the internal data structure works. 
         * Set up a project on SourceForge. (Not a change, but worth
         noting).
         * Added Groups method to return a list of section groups.

         0.01  Mon Jun 12, 2000 by RBOW
         Some general code cleanup, in preparation for changes to
         come. Put up Majordomo mailing list and sent invitation to
         various people to join it.

